Search NASA⌕ Search

SEARCH · Search NASA

Results for “STAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Developments on two lithium vapor-box linear test-stand experiments

The lithium vapor-box divertor is a possible fusion power exhaust solution.It uses condensation pumping to create a gradient of vapor density in a divertor slot; this should allow a stable detachment front without active feedback.As initial explorations of the concept, two test stands which take the form of three connected cylindrical stainless steel boxes are being developed: one without plasma at PPPL, to test models of lithium evaporation and flow; and one for the linear plasma device Magnum-PSI (at DIFFER in Eindhoven, The Netherlands) to test the ability of a lithium vapor cloud to induce volumetric detachment and redistribute the plasma power.The first experiment uses boxes with diameters of 6 cm, joined by apertures with diameters of 2.2 cm. Up to 1 g of Li is placed in one box, which is heated to up to 600 degrees C. The Li evaporates, then flows to and condenses in the two other, cooler boxes over several minutes. The quantity of Li transported is assessed by weighing the boxes before and after the heating cycle, and is compared to the quantity predicted to flow for the box at its measured temperature using a Direct Simulation Monte Carlo code, SPARTA. With good experimental conditions, the two values agree to within 15%.The experiment on Magnum-PSI is in the conceptual design stage.The design is assessed by simulations using the code B2.5-Eunomia.They show that when the hydrogen-ion plasma beam, with n_e = 4e20 per cubic meter, T_e = 1.5 eV, and r = 1 cm, is passed through a 16 cm long, 12 Pa, 625 degree C Li vapor cloud, the plasma heat flux and pressure on the target are significantly reduced compared to the case without Li.With the Li present, the plasma is cooled by excitation of Li neutrals followed by radiation until it volumetrically recombines, lowering the heat flux from 3.7 MW/m^2 to 0.13 MW/m^2, and the pressure is reduced by 93%, largely by collisions of hydrogen ions with neutral Li.

divertor↗

Establishment of Renewable Energy and Energy Development Office (REEDO) to Serve the Standing Rock Sioux Tribe Indian Reservation

The Standing Rock Sioux Tribe's (SRST) cultural identity demands that Tribal development occur in a sustainable manner and in a manner protective of the Tribe’s natural resources to preserve them for following generations. At the same time, the Tribe has a pressing need for both energy developments to meet Tribal needs and as a need for the economic development that energy development will represent. Under this project, the Tribe will address the staffing, training of staff, and establishment of such an office to allow SRST to meet its goal of sustainable energy development through community education; the Tribe believes that by educating the Tribal populace, Government and people, the Tribe will best be able to choose the types of sustainable development that will best meet Tribal needs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Gapped Nearly Free-Standing Graphene on an SiC(0001) Substrate Induced by Manganese Atoms

The electron band structure of manganese-adsorbed graphene on an SiC(0001) substrate has been studied using angle-resolved photoemission spectroscopy. Upon introducing manganese atoms, the conduction band of graphene, that is observed in pristine graphene indicating intrinsic electron-doping by the substrate, completely disappears and the valence band maximum is observed at 0.4 eV below Fermi energy. At the same time, the slope of the valence band decreases by the presence of manganese atoms, approaching the electron band structure calculated using the local density approximation method. The former provides experimental evidence of the formation of nearly free-standing graphene on an SiC substrate, concomitant with a metal-to-insulator transition. The latter suggests that its electronic correlations are efficiently screened, suggesting that the dielectric property of the substrate is modified by manganese atoms and indicating that electronic correlations in grpahene can also be tuned by foreign atoms. These results pave the way for promising device application using graphene that is semiconducting and charge neutral.

74 ATOMIC AND MOLECULAR PHYSICS↗

STANDING DETONATION WAVES

Standing detonation waves - hydrogen-oxygen ignition delay - vibrational relation effects - two-dimensional effects in gaseous detonations

IGNITION↗

Standing waves in self-trapped light filaments.

Light waves traveling backward and forward in very small filaments of optical material result in standing waves producing visible spatial beats, allowing detection of changes in refractive index

STANDING WAVE↗

Design and Development of an Aircraft Electric Powertrain Test Stand

Recent advancements in battery technology and power electronics are enabling novel approaches to powered flight that rely on fully electric or hybrid-electric powertrain systems. To mitigate the risk surrounding such unproven systems, it is necessary to characterize their performance on a component-wide and system-wide basis. In this paper, we discuss the design and development of an electric powertrain test stand that can collect high-fidelity data of motor, controller, and battery performance, thereby allowing us to determine system performance, efficiencies, and thermal characteristics.

test stand↗

X-ray standing wave investigation of submonolayer barium and strontium surface phases on Si(001)

Submonolayer (2 x 1) Ba/Si(001) and (2 x 1) Sr/Si(001) surface phases have been studied with normal Si(004) and off-normal Si(022) x-ray standing wave (XSW) measurements. These results are compared to previous XSW measurements of a (2 x 3) phase of Sr on Si(001). The (004) and (022) coherent positions indicate that alkaline-earth metal (AEM) atoms occupy the same type of high symmetry site in the (2 x 1) Ba/Si(001), (2 x 1) Sr/Si(001), and (2 x 3) Sr/Si(001) surface phases. The difference between the AEM adatom heights measured for the (2 x 1) Ba/Si(001) and (2 x 1) Sr/Si(001) phases is consistent with the difference in the ionic radii of Ba and Sr. Consideration of the nearest neighbor AEM-Si bond lengths that would result from AEM atoms sitting on symmetrically dimerized Si(001) at the height specified by the Ba and Sr coherent positions strongly suggests that the AEM atoms occupy valley-bridge sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of RF Feed System for Standing-Wave Accelerator Structures

We are investigating a standing wave accelerator structure that uses a rf feed to each individual cell. This approach minimizes rf power flow and electromagnetic energy absorbed by an rf breakdown. The objective of this work is a robust high-gradient (above 100 MV/m) X-band accelerator structure.

43 PARTICLE ACCELERATORS↗

RF Choke for Standing Wave Structures and Flanges

SLAC participates in the U.S. High Gradient collaboration whose charter includes basic studies of rf breakdown properties in accelerating structures. These studies include experiments with different materials and construction methods for single cell standing wave accelerating structures. The most commonly used method of joining cells of such structures is the high temperature bonding and/or brazing in hydrogen and/or vacuum. These high temperature processes may not be suitable for some of the new materials that are under consideration. We propose to build structures from cells with an rf choke, taking the cell-to-cell junction out of the electromagnetic field region. These cells may be clamped together in a vacuum enclosure, the choke joint ensuring continuity of rf currents. Next, we propose a structure with a choke joint in a high gradient cell and a view port which may allow us microscopic, in-situ observation of the metal surface during high power tests. And third, we describe the design of a TM01 choke flange for these structures.

08 HYDROGEN↗

Selenium Impregnated Monolithic Carbons as Free-Standing Cathodes for High Volumetric Energy Lithium and Sodium Metal Batteries

Energy density (energy per volume) is a key consideration for portable, automotive, and stationary battery applications. Selenium (Se) lithium and sodium metal cathodes are created that are monolithic and free-standing, and with record Se loading of 70 wt%. The carbon host is derived from nanocellulose, an abundant and sustainable forestry product. The composite is extremely dense (2.37 g cm -3 ), enabling theoretical volumetric capacity of 1120 mA h cm -3 . Such architecture is fully distinct from previous Se–carbon nano- or micropowders, intrinsically offering up to 2× higher energy density. For Li storage, the cathode delivers reversible capacity of 1028 mA h cm -3 (620 mA h g -1 ) and 82% retention over 300 cycles. For Na storage, 848 mA h cm -3 (511 mA h g -1 ) is obtained with 98% retention after 150 cycles. The electrodes yield superb volumetric energy densities, being 1727 W h L -1 for Li–Se and 980 W h L -1 for Na–Se normalized by total composite mass and volume. Despite the low surface area, over 60% capacity is maintained as the current density is increased from 0.1 to 2 C (30 min charge) with Li or Na. Remarkably, the electrochemical kinetics with Li and Na are comparable, including the transition from interfacial to diffusional control.

25 ENERGY STORAGE↗

Tree mortality submodels drive simulated long-term forest dynamics: assessing 15 models from the stand to global scale

Models are pivotal for assessing future forest dynamics under the impacts of changing climate and management practices, incorporating representations of tree growth, mortality, and regeneration. Quantitative studies on the importance of mortality submodels are scarce. We evaluated 15 dynamic vegetation models (DVMs) regarding their sensitivity to different formulations of tree mortality under different degrees of climate change. The set of models comprised eight DVMs at the stand scale, three at the landscape scale, and four typically applied at the continental to global scale. Some incorporate empirically derived mortality models, and others are based on experimental data, whereas still others are based on theoretical reasoning. Each DVM was run with at least two alternative mortality submodels. Model behavior was evaluated against empirical time series data, and then, the models were subjected to different scenarios of climate change. Most DVMs matched empirical data quite well, irrespective of the mortality submodel that was used. However, mortality submodels that performed in a very similar manner against past data often led to sharply different trajectories of forest dynamics under future climate change. Most DVMs featured high sensitivity to the mortality submodel, with deviations of basal area and stem numbers on the order of 10–40% per century under current climate and 20–170% under climate change. The sensitivity of a given DVM to scenarios of climate change, however, was typically lower by a factor of two to three. We conclude that (1) mortality is one of the most uncertain processes when it comes to assessing forest response to climate change, and (2) more data and a better process understanding of tree mortality are needed to improve the robustness of simulated future forest dynamics. Our study highlights that comparing several alternative mortality formulations in DVMs provides valuable insights into the effects of process uncertainties on simulated future forest dynamics.

54 ENVIRONMENTAL SCIENCES↗

Sn‐Polyester/Polyimide Hybrid Flexible Free‐Standing Film as a Tunable Dielectric Material

Abstract Flexible films having high dielectric constants with low dielectric loss have promising application in the emerging area of high‐energy‐density materials. Here, for the first time, an organometallic, Sn‐polyester‐containing hybrid free‐standing film in polyimide matrix is reported. Polyimide, pBTDA‐HDA, is used with poly(dimethyltin glutarate) and poly(dimethyltin‐3,3‐dimethyglutarate) (pDMTDMG) for having a processable film with tunable dielectric properties. Hybrid film with 60% pDMTDMG and 40% PI (HB2) is found to have improved dielectric features over previously synthesized organic polyimide and organometallic Sn‐polyester homopolymers. These novel organometallic–organic hybrid systems expanded a new area of dielectrics for next‐generation electronics with superior overall electrical performance.

Nasreen, Shamima↗

An Overview of the Hybrid Illinois Device for Research and Applications Material Analysis Test-stand (HIDRA-MAT)

The Hybrid Illinois Device for Research and Applications (HIDRA) at the University of Illinois at Urbana-Champaign is a toroidal plasma device that enables fusion plasma-material interaction testing with both stellarator and tokamak plasmas. HIDRA’s long-pulse steady state stellarator plasmas provide a testbed for plasma facing component (PFC) plasma exposures. The HIDRA Material Analysis Test-stand (HIDRA-MAT) is a material characterization module attached to HIDRA that is being designed and fabricated to include thermal desorption spectroscopy and laser induced breakdown spectroscopy systems for in-vacuo PFC characterization. A specialized rotatable sample holder positions the sample for liquid metal droplet application from a liquid metal droplet injector on HIDRA-MAT. Early experiments look to investigate the effect liquid lithium has on porous tungsten samples’ retention of H, D, and He after plasma exposure. Preliminary results from a dual residual gas analyzer system show the ability to differentiate D2 and He in HIDRA-MAT. Finally, this work aims to advance the understanding of liquid metal PFCs and further the design and development of new fusion PFCs and technologies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗