Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electrical Analysis of Pulsed Laser Annealed Poly-Si: Ga/SiOx Passivating Contacts

In this contribution, we examine Ga hyper-doped poly-Si/SiOx contacts realized by pulsed laser melting (PLM). Here, we use Ga as a novel p-type dopant and B as a conventional dopant to induce non-equilibrium doping using an excimer laser. We perform simulations to visualize the maximum melt depth profiles within the poly-Si, with a goal of distributing dopants close to the tunneling oxide, but at the same time preserving the passivation. Hall measurements show that sheet resistance for B is lower than Ga due to its higher solid solubility limit in Si. After comparing the Hall active dopant concentration with the chemical concentration obtained by SIMS measurement, we show nearly 100% activation B activation reaching 10^21 cm-3, while only ~20% activation for Ga. Nevertheless, we achieve active doping concentrations of Ga in poly-Si six times higher than its solid solubility limit in Si (~10^19 cm-3). We compare our Hall mobilities with values in the literature for c-Si and show that B mobilities in laser-treated poly-Si are close to that of the literature value for B, while Ga mobilities are lower, possibly due to additional scattering channels within grain boundaries and deformed lattice. We also compare our results on PLM samples with conventional furnace annealed samples, and we show much higher percent activation and mobilities. Previously, we showed a low contact resistivity of 35.5 +/- 2.4 m..omega..cm2. Here, we further confirm this result by scanning spreading resistance microscopy and Kelvin force nanoprobe microscopy. We demonstrate that our poly-Si: Ga/nCz contact exhibits large drift and diffusion currents under normal cell operating voltage, which widens the laser processing window for a good metal/poly-Si/c-Si contact.

high-efficiency solar cells↗
DOE OSTI2026

Elongated Fullerene Unlocks Oxygen-Resistant Perovskite Solar Minimodules

State-of-the-art encapsulation cannot prevent the permeation of oxygen into perovskite solar cells (PSCs). Here, we report the finding that p-i-n structured PSCs degrade quickly under oxygen exposure. Oxidation of C60, rather than perovskites, dominates the degradation. Chemical absorption of oxygen by C60 is identified, which impairs its electron transport property. We modify the electron transport layers to address the instability under oxygen exposure. The elongated fullerene C70 is found to react with oxygen orders of magnitude slower than C60. In combination with a compact SnO2 buffer fabricated by atomic layer deposition, which can slow down the oxygen diffusion, the resulting unencapsulated PSCs with C70 retained 90% of their initial efficiency after 1-sun illumination in pure oxygen for 1,200 h at 70 degrees C, improving stability by hundreds of times. Testing of unencapsulated perovskite minimodules of different perovskite compositions with C70 gives extrapolated lifetimes of 17-41 years at 50 degrees C.

14 SOLAR ENERGY↗
DOE OSTI2021

A Flow Rate Dependent 1D Model for Thermally Stratified Hot-Water Energy Storage

Stratified tank models are used to simulate thermal storage in applications such as residential or commercial hot-water storage tanks, chilled-water storage tanks, and solar thermal systems. The energy efficiency of these applications relates to the system components and the level of stratification maintained during various flow events in the tank. One-dimensional (1D) models are used in building energy simulations because of the short computation time but often do not include flow-rate dependent mixing. The accuracy of 1D models for plug flow, plug flow with axial conduction, and two convection eddy-diffusivity models were compared with experimental data sets for discharging a 50-gal residential tank and recharging the tank with hot water from an external hot-water source. A minimum and maximum relationship for the eddy diffusivity factor were found at Re <2100 and >10,000 for recirculation of hot water to the top of the tank and vertical tubes inletting cold water at the bottom. The root mean square error decreased from >4 °C to near 2 °C when considering flow-based mixing models during heating, while the exponential decay of the eddy diffusion results in a root mean square error reduction of 1 °C for cone-shaped diffusers that begin to relaminarize flow at the inlet.

1D flow model↗
DOE OSTI2023

Internal gravity waves in massive stars: II. Frequency analysis across stellar mass

Stars that are over 1.6 solar masses are generally known to possess convective cores and radiative envelopes, which allows for the propagation of outwardly travelling internal gravity waves (IGWs). Here, we study the generation and propagation of IGWs in such stars using two-dimensional, fully non-linear hydrodynamical simulations with realistic stellar reference states from the one-dimensional stellar evolution code, Modules for Stellar Astrophysics. Compared to previous similar works, this study utilises radius-dependent thermal diffusivity profiles for five different stellar masses at the middle of the main sequence: 3 M ⊙ , 5 M ⊙ , 7 M ⊙ , 10 M ⊙ , and 13 M ⊙ . From the simulations, we find that the surface perturbations are larger for higher masses, but no noticeable trends are observed for the frequency slopes with different stellar masses. The slopes are also similar to the results from previous works. We compared our simulation results with stellar photometric data from a recent survey and we found that for frequency intervals above 8 μHz, there is a good agreement between the temperature frequency slopes from the simulations and the surface brightness variations of these observed stars. This indicates that the brightness variations are caused by core-generated IGWs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Comparative Studies of Optoelectronic Properties, Structures, and Surface Morphologies for Phosphorus-Doped Poly-Si/SiOx Passivating Contacts

We investigated and compared optoelectronic properties, crystallographic structures, and nanoscale surface morphologies of ex-situ phosphorus-doped polycrystalline silicon (poly-Si)/SiO x passivating contacts, formed by different deposition methods (sputtering, plasma-enhanced chemical vapour deposition (PECVD), and low-pressure chemical vapour deposition (LPCVD)). Across all these deposition technologies, a similar trend is observed: higher diffusion temperatures yield films that are more crystalline but have rougher surface morphologies due to bigger surface crystal grains. Also, the recrystallization process of the as-deposited Si films starts from the SiO x interface, rather than from the film surface and bulk. However, there are some distinct differences among these technologies. Firstly, the LPCVD method yields the roughest surface and smallest degree of crystallinity on finished poly-Si films. In contrast, the PECVD method has the smoothest surface for both as-deposited Si and annealed poly-Si films. Secondly, as-deposited sputtered and PECVD Si films contain only an amorphous phase whereas as-deposited LPCVD films has already had some crystalline phase. Thirdly, the LPCVD phosphorus in-diffusion into the substrate depends strongly on the initial film thickness, whereas for the other two methods it is weakly dependent on thickness.

crystallographic structures↗
DOE OSTI2024

Predictive Models and Novel Accelerated Tests for the Reliability of Cell Metallization in Photovoltaic Modules (Final Report)

Studies of metallization corrosion m photovoltaics have mainly been limited to comparisons of modules placed in accelerated chambers to fielded modules [1]. Damp Heat accelerated tests and phenomenological equations [2] are used to assess metallization corrosion without understanding the effect of UV light and temperature and humidity cycles on encapsulant adhesion degradation. The roles of encapsulant in-and out-diffusions of moisture and encapsulant impurities are important. Furthermore, few photovoltaic metallization corrosion studies included the role of bias and leakage currents, which are crucial in the electrochemical reaction of metallization. Leakage currents can highly accelerate the corrosion mechanism and are important to include in the studies of corrosion. In our research plan, we will address the following gaps in the PV community's understanding of metallization corrosion: (1) metallization corrosion with bias, humidity, and impurities in the encapsulant or metallization; (2) humidity diffusion through fresh and degraded encapsulants; and (3) comparison of model predictions with outdoor field modules and SunPower's extensive data for its back-contact and front-contact fleets [2] along with NREL's store of >20 year old modules. Our goal is to build models and accelerated tests to predict long term degradation of metallization corrosion of photovoltaic modules in the field. Our studies will include metals used in c-Si solar cells (Cu, Ag, and Al) and commonly used encapsulants (EV A (ethylene vinyl acetate), TPO (thermoplastic olefin), and silicone).

14 SOLAR ENERGY↗
DOE OSTI2021

23.4% monolithic epitaxial GaAsP/Si tandem solar cells and quantification of losses from threading dislocations

A 2-terminal, dual-junction, epitaxially integrated, GaAsP/Si tandem solar cell with an 3rd party certified efficiency of 23.4 % was fabricated via MOCVD growth on an ex-situ produced Si sub cell. The drastic efficiency improvement over the authors previous peer-reviewed demonstration of such a device architecture is examined. Critical advancements in top cell design to maximize short wavelength response were critical in enabling improved top cell response. An in-depth analysis of this champion tandem cell has identified key loss mechanisms which elucidate the pathway for further efficiency gains. First, voltage dependent collection efficiency in the GaAsP top cell is the primary cause of fill factor losses currently limiting efficiency. Analysis of spectrally resolved I–V measurements and analytical device modeling and indicate poor diffusion length due to elevated dislocation densities as the likely cause for the voltage dependent collection efficiency. Second, modeling for the GaAs 0.75 P 0.25 top cell, using experimental data at multiple dislocation densities, provides quantitative understanding of the current and voltage losses associated with threading dislocations providing a clear efficiency pathway with reduction in dislocation density. Finally, Si subcell modeling identifies the pathway for further Si subcell advances over the present, simplistic design, which has yet to employ the known benefits of rear surface texture or dielectric passivation.

14 SOLAR ENERGY↗
DOE OSTI2024

An Integrated Deposition and Passivation Strategy for Controlled Crystallization of 2D/3D Halide Perovskite Films

Abstract This work introduces a simplified deposition procedure for multidimensional (2D/3D) perovskite thin films, integrating a phenethylammonium chloride (PEACl)‐treatment into the antisolvent step when forming the 3D perovskite. This simultaneous deposition and passivation strategy reduces the number of synthesis steps while simultaneously stabilizing the halide perovskite film and improving the photovoltaic performance of resulting solar cell devices to 20.8%. Using a combination of multimodal in situ and additional ex situ characterizations, it is demonstrated that the introduction of PEACl during the perovskite film formation slows down the crystal growth process, which leads to a larger average grain size and narrower grain size distribution, thus reducing carrier recombination at grain boundaries and improving the device's performance and stability. The data suggests that during annealing of the wet film, the PEACl diffuses to the surface of the film, forming hydrophobic (quasi‐)2D structures that protect the bulk of the perovskite film from humidity‐induced degradation.

2D/3D perovskites↗
DOE OSTI2021

Formation of three-dimensional bicontinuous structures via molten salt dealloying studied in real-time by in situ synchrotron X-ray nano-tomography

Abstract Three-dimensional bicontinuous porous materials formed by dealloying contribute significantly to various applications including catalysis, sensor development and energy storage. This work studies a method of molten salt dealloying via real-time in situ synchrotron three-dimensional X-ray nano-tomography. Quantification of morphological parameters determined that long-range diffusion is the rate-determining step for the dealloying process. The subsequent coarsening rate was primarily surface diffusion controlled, with Rayleigh instability leading to ligament pinch-off and creating isolated bubbles in ligaments, while bulk diffusion leads to a slight densification. Chemical environments characterized by X-ray absorption near edge structure spectroscopic imaging show that molten salt dealloying prevents surface oxidation of the metal. In this work, gaining a fundamental mechanistic understanding of the molten salt dealloying process in forming porous structures provides a nontoxic, tunable dealloying technique and has important implications for molten salt corrosion processes, which is one of the major challenges in molten salt reactors and concentrated solar power plants.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Artificial ground reflector size and position effects on energy yield and economics of single‐axis‐tracked bifacial photovoltaics

Abstract Artificial ground reflectors improve bifacial energy yield by increasing both front and rear‐incident irradiance. Studies have demonstrated an increase in energy yield due to the addition of artificial reflectors; however, they have not addressed the effect of varying reflector dimensions and placement on system performance and the impact of these parameters on the reflectors' financial viability. We studied the effect of high albedo (70% reflective) artificial reflectors on single‐axis‐tracked bifacial photovoltaic systems through ray‐trace modeling and field measurements. In the field, we tested a range of reflector configurations by varying reflector size and placement and demonstrated that reflectors increased daily energy yield up to 6.2% relative to natural albedo for PERC modules. To confirm the accuracy of our model, we compared modeled and measured power and found a root mean square error (RMSE) of 5.4% on an hourly basis. We modeled a typical meteorological year in Golden, Colorado, to demonstrate the effects of artificial reflectors under a wide range of operating conditions. Seventy percent reflective material can increase total incident irradiance by 1.9%–8.6% and total energy yield by 0.9%–4.5% annually after clipping is considered with a DC–AC ratio of 1.2. Clipping has a significant effect on reflector impact and must be included when assessing reflector viability because it reduces reflector energy gain. We calculated a maximum viable cost for these improvements of up to $2.50–4.60/m 2 , including both material and installation, in Golden. We expanded our analysis to cover a latitude range of 32–48°N and demonstrated that higher‐latitude installations with lower energy yield and higher diffuse irradiance content can support higher reflector costs. In both modeling and field tests, and for all locations, the ideal placement of the reflectors was found to be directly underneath the module due to the optimized rear irradiance increase.

14 SOLAR ENERGY↗
DOE OSTI2022

Metal Halide Perovskites Demonstrate Radiation Hardness and Defect Healing in Vacuum

Herein, we subject formamidinium lead iodide films to oxygen-containing gases (flowing O 2 or free diffusion of lab atmosphere), inert gases (flowing He, Ar, or N 2 ), and vacuum. Our films are irradiated by Cu Ka X-rays and held at 75 °C while X-ray diffraction is recorded. Under all gas conditions, we observe a reproducible 1.1 ± 0.5 A 3 perovskite lattice contraction from an initial unit cell volume of 256.5 ± 0.8 A 3 concurrent with continuous perovskite loss and lead iodide growth. Oxygen-containing gases increase the reaction rates without materially altering perovskite structural changes. Under the same temperature and irradiation conditions in vacuo, a self-healing reaction is observed, exhibited by a reproducible (0.9 ± 0.3 A 3 ) lattice expansion and stabilization of the perovskite. Furthermore, interactions between the perovskite, defects, and minority phases are simulated by generalized gradient approximation Perdew-Burke-Ernzerhof (GGA-PBE) density functional theory. Lattice contraction indicates an increase in the concentration of Schottky defects-pairs of formamidinium and iodine vacancies. Under irradiation in every atmospheric condition, a solid solution of Schottky defects with a concentration of several percent diffuses and precipitates forming lead iodide and consuming the defects. In the presence of ionized gases, this framework is modified to include the continual loss of formamidinium and iodine ions from the perovskite forming Schottky defects.

14 SOLAR ENERGY↗
DOE OSTI2023

Modeling Ring Current Proton Fluxes Using Artificial Neural Network and Van Allen Probe Measurements

Abstract Terrestrial ring current dynamics are a critical part of the near‐space environment, in that they directly drive geomagnetic field variations that control particle drifts, and define geomagnetic storms. The present study aims to specify a global and time‐varying distribution of ring current proton using geomagnetic indices and solar wind parameters with their history as input. We train an artificial neural network (ANN) model to reproduce proton fluxes measured by the Radiation Belt Storm Probes Ion Composition Experiment instrument onboard Van Allen Probes. By choosing optimal feature parameters and their history length, the model results show a high correlation and a small error between model specifications and satellite measurements. The modeled results well capture energy‐dependent proton dynamics in association with geomagnetic storms, including inward radial diffusion, acceleration and decay. Our ANN model produces proton fluxes with their corresponding 3D spatiotemporal variations, capturing the latitudinal distribution and local time asymmetry that are consistent with observations and that can further inform theory.

Li, Jinxing↗
DOE OSTI2022

Semi Transparent Three-Dimensional Macroporous Quaternary Oxynitride Photoanodes for Photoelectrochemical Water Oxidation

Semi transparent three-dimensional macroporous (3DM) photoanodes based on quaternary oxynitrides have the potential to simultaneously realize superior light harvesting and efficient charge transfer in a tandem photoelectrochemical (PEC) cell. A 3DM CaTaO 2 N photoanode was prepared for the first time on a GaN/Al 2 O 3 substrate via a chemical route, and it exhibits a high transmittance of >60% in the wide solar spectrum and a photoresponse onset at −0.3 V versus the reversible hydrogen electrode (V RHE ) under simulated solar illumination. In particular, a plateau photocurrent density of 0.21 mA cm –2 was achieved at a low potential of 0.4 V RHE , which was 1.6-fold and more than 50-fold higher than a two-dimensional macroporous (2DM) CaTaO 2 N/GaN/Al 2 O 3 photoanode and a conventional particle-based CaTaO 2 N/GaN/Al 2 O 3 photoanode, respectively. The bicontinuous, interconnected pore structure within this 3DM film can improve charge carrier separation and collection by reducing the average diffusion distance for minority carriers toward the electrolyte. Optical measurements and simulations verified the enhanced sunlight harvesting in the 3DM photoanode, which was ascribed to the concentrated distribution of the electric field and multiple scattering. Furthermore, this study provides guidance for future synthesis of highly efficient semitransparent 3DM quaternary oxynitride-based photoanodes for a tandem PEC device.

Layers↗
DOE OSTI2023

Trimerized small-molecule acceptors enable high-performance organic solar cells with high open-circuit voltage and prolonged life-time

Although the recent development of Y-series small-molecule acceptors (SMAs) has led to a dramatic increase in the power conversion efficiency (PCE) of organic solar cells (OSCs), the operational stability (device lifetime) of OSCs is inadequate for commercialization. In this study, we develop a new trimer acceptor (TYT), consisting of three Y-based molecules linked by electron-donating spacers, to realize an OSC with high-performance (PCE > 18%) and -stability (t 80% lifetime > 8000 h under 1 sun illumination, in which t 80% lifetime is the time required for the PCE of the OSC to reach 80% of its initial value). We demonstrate that the trimerization approach affords an acceptor, TYT, with an upshifted lowest unoccupied molecular orbital energy level, which, in turn, affords an efficient OSC with a high open-circuit voltage (0.964 V). In addition, the glass-transition temperature (T g ) of TYT (217 °C) is significantly higher than those of monomer (MYT, T g = 80 °C) and dimer (DYT, T g = 127 °C) acceptors, which effectively suppresses the molecular diffusion of TYT in a blend film with a polymer donor. Accordingly, a TYT-based OSC demonstrates a high PCE (18.2%) and long t 80% lifetime under 1 sun illumination (8454 h), outperforming MYT- and DYT-based OSCs that exhibit PCEs and t 80% lifetimes of 16.4% and 35 h, and 17.3% and 2551 h, respectively. Therefore, this study provides important guidelines for the design of electron acceptors in achieving OSCs with high performance and stability close to a commercial level.

14 SOLAR ENERGY↗
DOE OSTI2023

Solid Solvation Assisted Electrical Doping Conserves High‐Performance in 500 nm Active Layer Organic Solar Cells

Abstract Organic solar cells (OSCs) process fascinating solution‐printing capability to achieve low‐cost and large‐scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L dr ) and diffusion (L diff ) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick‐film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm 2 devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long‐term, thick‐film, and large‐area.

Chemistry↗
DOE OSTI2026

How Silica Surface Chemistry Modulates Interfacial Water: Insights from Machine Learning Molecular Dynamics

Controlling water structure and dynamics at silica interfaces are central to a wide range of technologies, including protective oxide layers for solar water splitting and nanoporous membranes. In this work, we develop a machine learning interatomic potential, trained via active learning, to achieve ab initio accuracy for water confined between hydroxylated silica surfaces over a range of silanol coverages and slit widths. We find that partially hydroxylated surfaces (50 and 75% OH) support stronger water−surface hydrogen bonding and more extended interfacial density profiles than fully hydroxylated (100% OH) surfaces, indicating that increasing OH coverage does not necessarily strengthen interfacial hydrogenbond networks. Translational diffusion decreases approximately linearly with slit width and OH coverage, whereas rotational dynamics respond nonlinearly. In particular, at the smallest slit width of 5 Å, 75% OH coverage produces an enhanced local tetrahedral ordered interfacial network that strongly suppresses reorientation, while 100% coverage yields a crowded, disordered interfacial layer that also hinders rotation. In contrast, the 50% OH coverage is sufficiently sparse that it does not markedly alter water structure or dynamics under confinement. These results show that coupled control of pore size and surface chemistry enables nonlinear tuning of interfacial water structure and transport, providing a design strategy for optimizing porous silica for either enhanced interfacial stability and controlled reactivity or rapid and selective transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Use of physics to improve solar forecast: Part III, impacts of different cloud types

Cloud-type impacts present a great challenge to solar forecasting due to diverse and complex cloud-radiation interactions. This third part of our paper sequence seeks to address this challenge by quantifying the forecast accuracies under eight cloud types: cumulus (Cu), stratified clouds (St), altocumulus (Ac), altostratus (As), cirrostratus/anvil (Cr), cirrus (Ci), congestus (Co), deep convective clouds (Dc) across four physics-informed persistence models reported in Part I. To generalize the cloud impacts, the eight cloud types are further grouped into three cloud categories based on their common features: weak convective clouds, stratiform clouds, and strong convective clouds. Here, the decade-long (2001 ~ 2014) collocated measurements of irradiances and cloud types at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program South Great Plain (SGP) Central Facility site are used for model evaluation. Results reveal a clear performance hierarchy for global horizontal irradiance (GHI) and direct normal irradiance (DNI): best for weak convective clouds and cirrus, intermediate for stratiform clouds, and worst for strong convective clouds. Performance for diffuse horizontal irradiance (DHI) is less influenced by cloud types. Cloud albedo dominates all three irradiances for Dc, while both cloud albedo and cloud fraction are influential for other cloud types. A 12 %~33 % improvement in accuracy at 6-hour lead time compared to the benchmark smart model confirms the effectiveness of incorporating physics into the models for various cloud types; further improvements are expected by directly integrating cloud type information into forecasting models by modifying the physical formulation of cloud-radiation interaction, and/or using more advanced machine learning models.

14 SOLAR ENERGY↗
DOE OSTI2024

Super-Kamiokande Operations (Final Scientific/Technical Report)

The Super-Kamiokande experiment (SK, or Super-K) is based on a 50-kton water Cherenkov detector with 11,129 photomultiplier tubes. The detector is located in the Kamioka mine near Toyama, Japan. The detector has been operating since 1996. The collaboration is now around 165 people, mostly from the U.S. and Japan, but including Canada, the UK, S. Korea, Italy, China, Poland, France and Spain. Notable accomplishments so far include: the discovery of neutrino oscillations using atmospheric and solar neutrinos (and thus demonstrating that neutrinos have mass), the confirmation of these oscillations as the far detector of the K2K long baseline experiment, the first observation of v e appearance and non-zero θ 13 in a long baseline (T2K) beam, the world’s strictest limits on proton decay, the world’s best limits on indirect dark matter annihilation at moderate energies, sensitivity to a galactic supernova over most of the running time since 1996, the world’s best limit on diffuse supernova neutrinos, the first direct indication of matter effects on neutrino oscillations, and a number of other published results and theses in particle astrophysics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗