Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solid angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Toughening of BIS maleimide resins: Synthesis and characterization of maleimide terminated poly(arylene ether) oligomers and polymers

Amine functional poly(arylene ether) sulfones were previously reported. Herein, the chemistry was extended to amorphous poly(arylene ether) ketones because of their higher fracture toughness values, relative to the polysulfones. It was demonstrated that the amino functional oligomers undergo a self-crosslinking reaction at temperatures above about 220 C. This produces an insoluble, but ductile network that has excellent resistance. A ketamine structure hypothesis was proposed and verified using solid state magic angle NMR. In most cases, the water generated upon ketamine formation is too low to produce porosity and solid networks are obtained. The stability of the ketamine networks towards hydrolysis is excellent. The chemistry was further demonstrated to be able to crosslink preformed nonfunctional poly(arylene ether) ketones if a difunctional amine was utilized. This concept has the possibility of greatly improving the creep resistance of thermoplastics. Also, a new technique was developed for converting the amine functional oligomers cleanly into maleimide structures. This method involves reacting maleic anhydride with monomeric aminophenols in the presence of solvent mixtures.

Mcgrath, J. E.↗
DOE OSTI2016

Constant-time 2D and 3D through-bond correlation NMR spectroscopy of solids under 60 kHz MAS

Establishing connectivity and proximity of nuclei is an important step in elucidating the structure and dynamics of molecules in solids using magic angle spinning (MAS) NMR spectroscopy. Although recent studies have successfully demonstrated the feasibility of proton-detected multidimensional solid-state NMR experiments under ultrafast-MAS frequencies and obtaining high-resolution spectral lines of protons, assignment of proton resonances is a major challenge. In this study, we first re-visit and demonstrate the feasibility of 2D constant-time uniform-sign cross-peak correlation (CTUC-COSY) NMR experiment on rigid solids under ultrafast-MAS conditions, where the sensitivity of the experiment is enhanced by the reduced spin-spin relaxation rate and the use of low radio-frequency power for heteronuclear decoupling during the evolution intervals of the pulse sequence. In addition, we experimentally demonstrate the performance of a proton-detected pulse sequence to obtain a 3D {sup 1}H/{sup 13}C/{sup 1}H chemical shift correlation spectrum by incorporating an additional cross-polarization period in the CTUC-COSY pulse sequence to enable proton chemical shift evolution and proton detection in the incrementable t{sub 1} and t{sub 3} periods, respectively. In addition to through-space and through-bond {sup 13}C/{sup 1}H and {sup 13}C/{sup 13}C chemical shift correlations, the 3D {sup 1}H/{sup 13}C/{sup 1}H experiment also provides a COSY-type {sup 1}H/{sup 1}H chemical shift correlation spectrum, where only the chemical shifts of those protons, which are bonded to two neighboring carbons, are correlated. By extracting 2D F1/F3 slices ({sup 1}H/{sup 1}H chemical shift correlation spectrum) at different {sup 13}C chemical shift frequencies from the 3D {sup 1}H/{sup 13}C/{sup 1}H spectrum, resonances of proton atoms located close to a specific carbon atom can be identified. Overall, the through-bond and through-space homonuclear/heteronuclear proximities determined from the 3D {sup 1}H/{sup 13}C/{sup 1}H experiment would be useful to study the structure and dynamics of a variety of chemical and biological solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Tidal parameters derived from the perturbations in the orbital inclinations of the BE-C, GEOS-1 and GEOS-2 satellites

Effective tidal Love numbers and phase angles for the O sub one, K sub one, M sub two, K sub two, P sub one, and S sub two, tides are recovered. The effective tidal phase angles tend to be on the order of a few degrees. The effective tidal Love numbers are generally less than the solid earth Love number K sub two, of about 0.30. This supports the contention that the ocean tides give an apparent depression of the solid earth Love number. Ocean tide amplitudes and phases are calculated for the above tides assuming K sub two = 0.30 and the solid earth lag angle O sub two = 0. The results show good agreement on GEOS-1 but not on GEOS-II.

Rubincam, D. P.↗
NASA NTRS1975

Reentry aerodynamic characteristics of a space shuttle solid rocket booster (MSFC model 454) at high angles of attack and high Mach number in the NASA/Langley four-foot unitary plan wind tunnel (SA25F)

A force test of a 2.112 percent scale Space Shuttle Solid Rocket Booster (SRB), MSFC Model 454, was conducted in test section no. 2 of the Unitary Plan Wind Tunnel. Sixteen (16) runs (pitch polars) were performed over an angle of attack range from 144 through 179 degrees. Test Mach numbers were 2.30, 2.70, 2.96, 3.48, 4.00 and 4.63. The first three Mach numbers had a test Reynolds number of 1.5 million per foot. The remaining three were at 2.0 million per foot. The model was tested in the following configurations: (1) SRB without external protuberances, and (2) SRB with an electrical tunnel and a SRB/ET thrust attachment structure. Schlieren photographs were taken during the testing of the first configuration. The second configuration was tested at roll angles of 45, 90, and 135 degrees.

Johnson, J. D.↗
NASA NTRS1975

Space shuttle SRM plume expansion sensitivity analysis

The exhaust plumes of the space shuttle solid rocket motors can have a significant effect on the base pressure and base drag of the shuttle vehicle. A parametric analysis was conducted to assess the sensitivity of the initial plume expansion angle of analytical solid rocket motor flow fields to various analytical input parameters and operating conditions. The results of the analysis are presented and conclusions reached regarding the sensitivity of the initial plume expansion angle to each parameter investigated. Operating conditions parametrically varied were chamber pressure, nozzle inlet angle, nozzle throat radius of curvature ratio and propellant particle loading. Empirical particle parameters investigated were mean size, local drag coefficient and local heat transfer coefficient. Sensitivity of the initial plume expansion angle to gas thermochemistry model and local drag coefficient model assumptions were determined.

Smith, S. D.↗
DOE OSTI2015

Refractive-index determination of solids from first- and second-order critical diffraction angles of periodic surface patterns

We present two approaches for measuring the refractive index of transparent solids in the visible spectral range based on diffraction gratings. Both require a small spot with a periodic pattern on the surface of the solid, collimated monochromatic light, and a rotation stage. We demonstrate the methods on a polydimethylsiloxane film (Sylgard{sup ®} 184) and compare our data to those obtained with a standard Abbe refractometer at several wavelengths between 489 and 688 nm. The results of our approaches show good agreement with the refractometer data. Possible error sources are analyzed and discussed in detail; they include mainly the linewidth of the laser and/or the angular resolution of the rotation stage. With narrow-band light sources, an angular accuracy of ±0.025{sup ∘} results in an error of the refractive index of typically ±5 ⋅ 10{sup −4}. Information on the sample thickness is not required.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Physics of nanoscale immiscible fluid displacement

In this work, we investigate immiscible fluid displacement at small scales where slip lengths are on the order of characteristic system sizes, whereby Cox's law is not expected to be valid. Molecular dynamics simulations show that in this limit hydrodynamic bending becomes small and interfaces remain approximately spherical. In this case the only relevant angle for describing the interface shape is the dynamic microscopic angle at the fluid-solid interface. In our simulations, this angle is found to be described well by the molecular-kinetic theory originally proposed by Blake and Haynes. In general, this implies a different functional dependence between the contact angle (and related quantities) and the flow speed (or capillary number); this is demonstrated for the case of the force on the boundary for immiscible fluid displacement in a two-dimensional channel.

42 ENGINEERING↗
NASA NTRS1956

Charts for estimating performance of high-performance helicopters

Theoretically derived charts showing the profile-drag-thrust ratio are presented for helicopter rotors operating in forward flight and having hinged rectangular blades with a linear twist of 0 degree, 8 degrees, and 16 degrees. The charts, showing the profile-drag characteristics of the rotor for various combinations of pitch angle, ratio of thrust coefficient to solidity, and a parameter representing shaft power input, are presented for tip-speed ratios ranging from 0.05 to 0.50. Also presented in chart form are the ratio of thrust coefficient to solidity as a function of angles of attack, as a function of inflow ratio and collective pitch, and as a function of power and thrust coefficients. The charts in this report are considered more accurate than previous ones for flight conditions involving high inflow velocities and large regions of reversed velocity that may be encountered by high-performance helicopters. The charts may be used to study the effects of design changes on rotor performance and to indicate optimum performance conditions, as well as to estimate quickly rotor performance in forward flight. They are also useful in obtaining inflow-ratio and pitch-angle values for use in calculating flapping coefficients and spanwise loadings. The method of applying the charts to performance estimation is illustrated through sample calculation of a typical rotor-performance problem.

Gessow, Alfred↗
NASA NTRS1978

Lunar tidal acceleration obtained from satellite-derived ocean tide parameters

One hundred sets of mean elements of GEOS-3 computed at 2-day intervals yielded observation equations for the M sub 2 ocean tide from the long periodic variations of the inclination and node of the orbit. The 2nd degree Love number was given the value k sub 2 = 0.30 and the solid tide phase angle was taken to be zero. Combining obtained equations with results for the satellite 1967-92A gives the M sub 2 ocean tide parameter values. Under the same assumption of zero solid tide phase lag, the lunar tidal acceleration was found mostly due to the C sub 22 term in the expansion of the M sub 2 tide with additional small contributions from the 0 sub 1 and N sub 2 tides. Using Lambeck's (1975) estimates for the latter, the obtained acceleration in lunar longitudal in excellent agreement with the most recent determinations from ancient and modern astronomical data.

Goad, C. C.↗
DOE OSTI2019

Investigating the Microstructure of Poly(cyclosilane) by 29 Si Solid-State NMR Spectroscopy and DFT Calculations

Using high-resolution magic-angle spinning (MAS) solid-state NMR spectroscopy and density-functional theory (DFT) calculations, we determine the microstructure of the silicon-based functional polymer poly( 1,4Si 6 ) arising from the dehydrocoupling polymerization of cyclosilane 1,4Si 6 . 1 H- 29 Si refocused-INEPT experiments allow the unambiguous determination of the number of attached protons to a silicon atom for each 29 Si signal in 1,4Si 6 and poly( 1,4Si 6 ). One-dimensional 1 H→ 29 Si cross-polarization MAS (CPMAS) spectra of poly( 1,4Si 6 ) show the development of SiH resonances upon polymerization and peak integration indicates an average degree of polymerization of 20. The 1 H→ 29 Si CPMAS spectrum of poly( 1,4Si 6 ) also shows two sets of isotropic signals, suggesting the presence of at least two distinct species. Two-dimensional 29 Si dipolar double-quantum-single-quantum and single-quantum-single-quantum homonuclear correlation spectra reveal similar connectivity in the two species, pointing to stereochemical and/or conformational heterogeneity. DFT calculations on trimer models predict that chair or twist-boat conformations and with cis or trans diastereomers are all energetic minima. 29 Si chemical shift calculations of the lowest energy structures show that conformers and stereoisomers are expected to give rise to distinct 29 Si NMR peaks and likely explain the appearance of multiple sets of 29 Si NMR signals. Finally, the strategy outlined in this article is expected to be widely useful for the microstructural elucidation of silicon-based functional polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Structural Changes Associated with Transthyretin Misfolding and Amyloid Formation Revealed by Solution and Solid-State NMR

Elucidation of structural changes involved in protein misfolding and amyloid formation is crucial for unraveling the molecular basis of amyloid formation. We report structural analyses of the amyloidogenic intermediate and amyloid aggregates of transthyretin using solution and solid-state nuclear magnetic resonance (NMR) spectroscopy. These NMR solution results show that one of the two main β-sheet structures (CBEF β-sheet) is maintained in the aggregation-competent intermediate, while the other DAGH β-sheet is more flexible on millisecond time scales. Magic-angle-spinning solid-state NMR revealed that AB loop regions interacting with strand A in the DAGH β-sheet undergo conformational changes, leading to the destabilized DAGH β-sheet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Hydrophobic Inorganic Oxide Pigments via Polymethylhydrosiloxane Grafting: Dispersion in Aqueous Solution at Extraordinarily High Solids Concentrations

Building on the recent demonstration of aqueous-dispersible hydrophobic pigments that retain their surface hydrophobicity even after drying, we demonstrate the synthesis of surface-modified Ti-Pure R-706 (denoted R706) titanium dioxide-based pigments, consisting of a thin (one to three monolayers) grafted polymethylhydrosiloxane (PMHS) coating, which (i) are hydrophobic in the dry state according to capillary rise and dynamic vapor sorption measurements and (ii) form stable aqueous dispersions at solid contents exceeding 75 wt % (43 vol %), without added dispersant, displaying similar rheology to R706 native oxide pigments at 70 wt % (37 vol %) consisting of an optimal amount of conventional polyanionic dispersant (0.3 wt % on pigment basis). Additionally, the surface-modified pigments have been characterized via 29 Si and 13 C cross-polarization/magic angle spinning solid-state NMR spectroscopy; infrared spectroscopy; thermogravimetric and elemental analyses; and ζ potential measurements. On the basis of these data, the stability of the surface-modified PMHS-R706 aqueous dispersions is attributed to steric effects, as a result of grafted PMHS strands on the R706 surface, and depends on the chaotropic nature of the base used during PMHS condensation to the pigment/polysiloxane interface. The lack of water wettability of the surface-modified oxide particles in their dry state translates to improved water-barrier properties in coatings produced with these surface-modified pigment particles. Finally, the synthetic approach appears general as demonstrated by its application to various inorganic-oxide pigment particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Lithium substitution in strontium chlorapatite studied by solid state NMR spectroscopy

Strontium Chlorapatites with various amounts of Li substitution (Sr{sub 10-x}Li{sub x}(PO{sub 4}){sub 6}Cl{sub 2-δ}) were prepared by solid state reaction method and characterized by powder XRD and solid state NMR spectroscopy. XRD reveals shortening of lattice parameters upon Li incorporation. The linewidth of {sup 31}P solid state Magic Angle Spinning NMR spectra decreases with increase in Li content within the apatite phase. This study confirms Li uptake within the apatite phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Elucidating the Reaction Pathways of Veratrylglycero-β-Guaiacyl Ether Degradation over Metal-Free Solid Acid Catalyst with Hydrogen

Efficient cleavage of β-O-4 bonds in lignin to high-yield aromatic compounds for the potential production of fuels and chemicals is vital for the economics of the modern biorefinery industry. This work is distinct in that a detailed mechanistic analysis of the reaction pathways of veratrylglycero-β-guaiacyl ether (VGE) catalyzed by transition-metal-free solid acid zeolite in aqueous conditions at high hydrogen pressure has been performed. VGE degradation produced high monomers yields (≈87 %), including guaiacol (48.2 %), 1-(3,4-dimethoxyphenyl)ethanol (10.3 %), 1-(3,4-dimethoxyphenyl)-2-propanol (6.1 %), 3,4-dimethoxyphenylpropanol (4.7 %), 3,4-dimethoxycinnamyl alcohol (4.1 %), and 1,2-dimethoxy-4-propylbenzene (2 %). The products were identified and confirmed by the in situ solid-state magic angle spinning (MAS) 13 C NMR spectroscopy in real-time conditions and the two-dimensional gas chromatography (GC×GC). A variety of products reveal the crucial role of hydrogen, water, and acid sites for heterolytic cleavage of the β-O-4 bond in VGE. Decarbonylation, hydrogenolysis, hydrogenation, and dehydration reaction pathways are proposed and further validated using first-principles calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

In Silico Design of DNP Polarizing Agents: Can Current Dinitroxides Be Improved?

Numerical calculations of enhancement factors offered by dynamic nuclear polarization in solids under magic angle spinning (DNP-MAS) were performed to determine the optimal EPR parameters for a dinitroxide polarizing agent. We found that the DNP performance of a biradical is more tolerant to the relative orientation of the two nitroxide moieties than previously thought. In general, any condition in which the gyy tensor components of both radicals are perpendicular to one another is expected to have near-optimal DNP performance. These results highlight the important role of the exchange coupling, which can lessen the sensitivity of DNP performance to the inter-radical distance, but also lead to lower enhancements when the number of atoms in the linker becomes less than three. Finally, the calculations showed that the electron T1e value should be near 500μs to yield optimal performance. Importantly, the newest polarizing agents already feature all of the qualities of the optimal polarizing agent, leaving little room for further improvement. Further research into DNP polarizing agents should then target non-nitroxide radicals, as well as improvements in sample formulations to advance high-temperature DNP and limit quenching and reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Probing Interfacial Reaction Pathways in Atomic Layer Deposition on Sulfide Superionic Conductors

Sulfide superionic conductors (e.g., argyrodite Li 6 PS 5 Cl, LPSCl) are extremely promising for all solid-state batteries, but poor atmospheric stability and high interfacial reactivity limit widespread adoption. Coating LPSCl powders with ultrathin coatings using atomic layer deposition (ALD) mitigates these problems, protecting against atmospheric degradation and reducing reactivity with Li metal, yielding more stable cycling. Despite significant promise, the ALD mechanism is unknown, hampering the development of new coating chemistries. In this study, we elucidate the mechanism for Al 2 O 3 ALD on LPSCl using trimethyl aluminum (TMA) and H 2 O by combining in situ Fourier transform infrared spectroscopy, ex situ solid-state magic angle spinning nuclear magnetic resonance, UV Raman spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. We determine that ALD Al 2 O 3 nucleates promptly via TMA reaction with native —OH, —SH, and PS 3 -OH groups to form transient C–Al–O(S) species that are rapidly hydrolyzed during the subsequent H 2 O exposure. This reversible transformation maintains surface nucleophilicity and prevents sulfide decomposition. The resulting layer-by-layer growth leads to highly conformal Al 2 O 3 coatings on LPSCl that are readily scalable to ≥ 50 g quantities using a rotating drum fixture. This detailed understanding of ALD surface reactions provides critical insights guiding the selection of future ALD chemistries with improved performance.

atomic layer deposition↗
DOE OSTI2025

Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols

This study outlines a method for producing chemically recyclable crosslinked polyesters using renewable polyols-glycerol and sorbitol-combined with adipic acid (AA), which is transformed/activated into a polyanhydride mixture prior to use. A three-step procedure has been designed: 1) an acid-catalyzed reaction of AA with nontoxic isopropenyl acetate or acetic anhydride to form a crosslinking mixture (CLM) made of adipic-acetic mixed polyanhydrides; 2) a solvent- and additive-free process where glycerol or sorbitol, or a combination thereof, is reacted with the CLM to achieve a prepolymer, and 3) a casting/molding of the liquid viscous prepolymer to yield a thermoset as the end product. Different thermosets (eight examples) are prepared by changing the reagents ratio. These solids are thoroughly characterized by tensile tests, DMA, high-resolution magic angle spinning and solid-state NMR, thermal gravimetric analysis, DSC, and fourier transformed infra red (FT-IR) spectroscopy. The formation of cross-linked polyesters is confirmed in all cases, but mechanical properties varied significantly from one specimen to another. Interestingly, a tensile strength up to 18 MPa-approximately an order of magnitude higher than similar polymers-is achieved when sorbitol and the CLM are used in a 1:1 wt% ratio. The chemical recycle of the resulting polymers is achieved via methanolysis with quantitative recovery of the monomeric units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗