Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Modal coupling procedures adapted to NASTRAN analysis of the 1/8-scale shuttle structural dynamics model. Volume 1: Technical report

A dynamic substructuring analysis, utilizing the component modes technique, of the 1/8 scale space shuttle orbiter finite element model is presented. The analysis was accomplished in 3 phases, using NASTRAN RIGID FORMAT 3, with appropriate Alters, on the IBM 360-370. The orbiter was divided into 5 substructures, each of which was reduced to interface degrees of freedom and generalized normal modes. The reduced substructures were coupled to yield the first 23 symmetric free-free orbiter modes, and the eigenvectors in the original grid point degree of freedom lineup were recovered. A comparison was made with an analysis which was performed with the same model using the direct coordinate elimination approach. Eigenvalues were extracted using the inverse power method.

Zalesak, J.↗
NASA NTRS1976

Analysis of structural dynamic data from Skylab. Volume 2: Skylab analytical and test model data

The orbital configuration test modal data, analytical test correlation modal data, and analytical flight configuration modal data are presented. Tables showing the generalized mass contributions (GMCs) for each of the thirty tests modes are given along with the two dimensional mode shape plots and tables of GMCs for the test correlated analytical modes. The two dimensional mode shape plots for the analytical modes and uncoupled and coupled modes of the orbital flight configuration at three development phases of the model are included.

Demchak, L.↗
NASA NTRS1976

Structural dynamics, stability, and control of helicopters

The dynamic synthesis of a helicopter is reported. The method of approach is a variation of the component mode synthesis in the sense that it regards the aircraft as an assemblage of interconnected substructures. The equations of motion are derived in general form by means of the Lagrangian formulation in conjunction with an orderly kinematical procedure that takes into account the superposition of motion of various substructures, thus circumventing constraint problems.

Meirovitch, L.↗
NASA NTRS1976

Analysis of structural dynamic data from Skylab. Volume 2: Skylab analytical and test modal data

A compendium is presented of orbital configuration test modal data, analytical test modal data, analytical test correlation modal data and analytical flight configuration 1.2 modal data. Section A presents tables showing the generalized mass contributions for each of the thirty test modes. Section B presents the two dimensional mode shape plots for the thirty test modes. Tables of GMC's for the test correlated analytical modes are presented in Section C. These analytical modes were generated from a model that was adjusted to match test results by use of the methodology discussed in Sections 2.3 and 5.4 of Volume I of this report. Section D presents the two dimensional mode shape plots for the analytical modes. Sections E and F contain the uncoupled and coupled modes of the orbital flight configuration 1.2 at three development phases of the model.

Demchak, L.↗
NASA NTRS1978

Needs and trends in structural dynamics

The paper discusses dynamic analyses and testing of aerospace vehicles and the application of such analyses and testing to nonaerospace fields. Items covered in the section on dynamic analyses of aerospace vehicles include self-induced and forced oscillatory loads, approaches to dynamic modeling and analysis, nonlinear analyses, and integrated dynamics design and optimization. Items covered in the section on the dynamic testing of aerospace vehicles include integrated test philosophy, test facilities, and ways of improving performance and reducing costs. The nonaerospace applications that are discussed include ground and water transportation, medicine, and nuclear power plants.

Morosow, G.↗
NASA NTRS1982

Filter failure detection for systems with large space structure dynamics

A failure detection filter is applied to the detection of actuator and sensor failures on a free-free beam. Computer simulation tests are used to verify the filter design and study the effect of unmodeled modes on filter performance. In actuator tests, the failure signal to spillover noise ratio was found to be greatest when the filter bandwidth was 5 rad/sec beyond the input frequency. Observation spillover, however, was found to vary widely in tests run under similar conditions (same input frequency and filter poles) but with different detector gains. In sensor tests, the maximum signal-to-noise ratio for varying filter bandwidth depended upon the initial conditions placed on the unmodeled modes; the performance was good even for initial amplitudes on the first unmodeled mode 7.5% of that on the last modeled mode.

Carignan, C. R.↗
NASA NTRS1982

Analytical model accuracy requirements for structural dynamic systems

A test/analysis correlation criterion for the analytical model accuracy requirement has been developed. It is based on the principle of equal errors from the model inaccuracy and the uncertainties of dynamic environments. The forcing functions are idealized to establish the base for uncertainty definition and the maximum allowable errors from these uncertainties are obtained. Then the model accuracy requirement is established by comparing the responses due to the model errors to those due to the forcing function uncertainties.

Chen, J.-C.↗
NASA NTRS1982

Semi-implicit transient analysis procedures for structural dynamics analysis

A semi-implicit direct time integration procedure is presented which avoids factorization of the implicit difference solution matrix. The procedure, if properly implemented, requires only vectorial calculations and hence needs the same computer core space as explicit integration procedures. Guidelines for splitting the stiffness matrix into upper and lower matrices are established, which among other things are designed to satisfy a correct transmission of rigid-body motions from element (or grid) to its adjacent elements.

Park, K. C.↗
NASA NTRS1980

Structural dynamics payload loads estimates

Present analytical techniques by which design loads are predicted are very costly and time consuming. Chapter I presents the standard techniques used to analyze payload/booster systems. They are full scale methods in the sense that they all require the solution of the coupled equations of motion of the payload/booster system. Chapter II identifies several short cut methodologies. These already existing techniques do not require the solution of the coupled system equations. The potentials and shortcomings of each of these methods are discussed. Chapter III covers the favored methods accompanied by recommendations for further development, refinement, and demonstrations. An outline of a new approach is also included.

Engels, R. C.↗
NASA NTRS1981

Structural dynamics payload loads estimates

The development of a full scale payload integration method which reduces the cost of a load cycle and is capable of land long very large systems is discussed. The method solves the coupled booster/payload system equations and does not involve additional approximations as compared to the standard transient analysis. The method is cost effective and directly applicable to the shuttle payload design case.

Engels, R. C.↗
NASA NTRS1982

Structural dynamics payload loads estimates: User guide

This User Guide with an overview of an integration scheme to determine the response of a launch vehicle with multiple payloads. Chapter II discusses the software package associated with the integration scheme together with several sample problems. A short cut version of the integration technique is also discussed. The Guide concludes with a list of references and the listings of the subroutines.

Shanahan, T. G.↗
NASA NTRS1982

Dynamic structural aeroelastic stability testing of the XV-15 tilt rotor research aircraft

For the past 20 years, a significant effort has been made to understand and predict the structural aeroelastic stability characteristics of the tilt rotor concept. Beginning with the rotor-pylon oscillation of the XV-3 aircraft, the problem was identified and then subjected to a series of theoretical studies, plus model and full-scale wind tunnel tests. From this data base, methods were developed to predict the structural aeroelastic stability characteristics of the XV-15 Tilt Rotor Research Aircraft. The predicted aeroelastic characteristics are examined in light of the major parameters effecting rotor-pylon-wing stability. Flight test techniques used to obtain XV-15 aeroelastic stability are described. Flight test results are summarized and compared to the predicted values. Wind tunnel results are compared to flight test results and correlated with predicted values.

Schroers, L. G.↗
NASA NTRS1983

SSME structural dynamic model development

A mathematical model of the Space Shuttle Main Engine (SSME) as a complete assembly, with detailed emphasis on LOX and High Fuel Turbopumps is developed. The advantages of both complete engine dynamics, and high fidelity modeling are incorporated. Development of this model, some results, and projected applications are discussed.

Foley, M. J.↗