Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured light, Structured illumination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Design of a Borescope for Extravehicular Non-Destructive Applications

Anomalies such as corrosion, structural damage, misalignment, cracking, stress fiactures, pitting, or wear can be detected and monitored by the aid of a borescope. A borescope requires a source of light for proper operation. Today s current lighting technology market consists of incandescent lamps, fluorescent lamps and other types of electric arc and electric discharge vapor lamp. Recent advances in LED technology have made LEDs viable for a number of applications, including vehicle stoplights, traffic lights, machine-vision-inspection, illumination, and street signs. LEDs promise significant reduction in power consumption compared to other sources of light. This project focused on comparing images taken by the Olympus IPLEX, using two different light sources. One of the sources is the 50-W internal metal halide lamp and the other is a 1 W LED placed at the tip of the insertion tube. Images acquired using these two light sources were quantitatively compared using their histogram, intensity profile along a line segment, and edge detection. Also, images were qualitatively compared using image registration and transformation [l]. The gray-level histogram, edge detection, image profile and image registration do not offer conclusive results. The LED light source, however, produces good images for visual inspection by an operator. Analysis using pattern recognition using Eigenfaces and Gaussian Pyramid in face recognition may be more useful.

Bachnak, Rafic↗

Sculpting a Pre-Planetary Nebula with a Precessing Jet: IRAS 16342-3814

We have imaged the bipolar pre-planetary nebula IRAS 16342-3814 with the Keck adaptive optics (AO) system in four near-infrared bands in the 1.6-4.7 (micro)m range. The lobes, which showed smoothly varying brightness distributions in previous optical images taken with the Hubble Space Telescope, have a limb-brightened appearance in the AO images, with a remarkable corkscrew structure inscribed on the lobe walls. A well-collimated, precessing jet with a diameter less than or approximately equal to 100 AU and a precession period less than or approximately equal to 50 yr, interacting with ambient circumstellar material, is most likely responsible for the corkscrew structure and the lobes, as indicated by a detailed comparison of our observations with published numerical simulations. The very red colors of the lobes in the near-infrared, coupled with their visibility at optical wavelengths, require that at least half, but not all, of the light of the central star be trapped by a compact circumstellar dust cloud heated to approximately 600-700 K and reradiated in the infrared. The lobes are thus illuminated both by the infrared light from this dust cloud as well as by the optical light from the central star.

circumstellar matter↗

Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic–Inorganic Hybrid Photocatalysts

Herein, we report for the first time the use of vapor phase infiltration (VPI) to infuse conducting polymers with inorganic metal oxide clusters that together form a photocatalytic material. While vapor infiltration has previously been used to electrically dope conjugated polymers, this is the first time, to our knowledge, that the resultant hybrid material has been demonstrated to have photocatalytic properties. The system studied is poly(3-hexylthiophene-2,5-diyl) (P3HT) vapor infiltrated with TiCl 4 and H 2 O to create P3HT-TiO x organic–inorganic hybrid photocatalytic materials. X-ray photoelectron spectroscopy analysis shows that P3HT-TiO x VPI films consist of a partially oxidized P3HT matrix, and the infiltrated titanium inorganic is in a 4+ oxidation state with mostly oxide coordination. Upon visible light illumination, these P3HT-TiO x hybrids degrade methylene blue dye molecules. The P3HT-TiO x hybrids are 4.6× more photocatalytically active than either the P3HT or TiO 2 individually or when sequentially deposited (e.g., P3HT on TiO 2 ). On a per surface area basis, these hybrid photocatalysts are comparable or better than other best in class polymer semiconductor photocatalysts. VPI of TiCl 4 + H 2 O into P3HT makes a unique hybrid structure and idealized photocatalyst architecture by creating nanoscale TiO x clusters concentrated toward the surface achieving extremely high catalytic rates. The mechanism for this enhanced photocatalytic rate is understood using photoluminescence spectroscopy, which shows significant quenching of excitons in P3HT-TiO x as compared to neat P3HT, indicating that P3HT acts as a photosensitizer for the TiO x catalyst sites in the hybrid material. This work introduces a new approach to designing and synthesizing organic–inorganic hybrid photocatalytic materials, with expansive opportunities for further exploration and optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A gold hybrid structure as optical coupler for quantum well infrared photodetector

A hybrid structure consisting of a square lattice of gold disk arrays and an overlaying gold film is proposed as an optical coupler for a backside-illuminated quantum well infrared photodetector (QWIP). Finite difference time-domain method is used to numerically simulate the reflection spectra and the field distributions of the hybrid structure combined with the QWIP device. The results show that the electric field component perpendicular to the quantum well is strongly enhanced when the plasmonic resonant wavelength of the hybrid structure coincides with the response one of the quantum well infrared photodetector regardless of the polarization of the incident light. The effect of the diameter and thickness of an individual gold disk on the resonant wavelength is also investigated, which indicates that the localized surface plasmon also plays a role in the light coupling with the hybrid structure. The coupling efficiency can exceed 50 if the structural parameters of the gold disk arrays are well optimized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Soil Moisture Active and Passive (SMAP) White-Painted Expanded Polystyrene (EPS) Radome Survivability Test

NASA's SMAP Mission launched in January 2015 into a 685 km near-polar, sun-synchronous orbit. The SMAP instrument architecture incorporates an L-band radar and radiometer which share a common feedhorn and mesh reflector. The instrument rotates about the nadir axis at approximately 15 rpm, thereby providing a conically scanning wide swath antenna beam that is capable of achieving global coverage within three days. The radiometer and its associated electronics have tight thermal stability requirements in order to meet the required surface emittance measurement precision from space. Maintaining the thermal stabilities is quite challenging because the radiometer is located on a spinning platform that can either be in full sunlight or eclipse, and thus exposed to a highly transient environment. Stability requirements were met by integrating a light-weight Expanded Polystyrene (EPS) radome into the design to prevent solar illumination of the feed horn interior. The radome was painted white since the thermo-optical properties of bare sunlit EPS degrade rapidly over the three-year mission. Milling of the EPS and solvent within the white paint created cavities on the EPS surface which may introduce localized hot spots possibly violating the EPS glass transition temperature of 96degC and leading to structural integrity concerns. A three-day thermal test was conducted in a vacuum chamber to verify survivability of the radome during a simulated non-spin fault condition at end of mission. A portable solar simulator illuminated the test article and the beam irradiance was kept nearly constant during the entire 50 hour test, except during the first hour which simulated the expected 79degC on-orbit surface temperature of the radome. The test article survived based on the established pass criteria for three separate metrics: dimensional, optical property, and color. If any hot spots exist locally, they did not cause any observable permanent deformation when compared to pre- and post-test images. The test results increase confidence that there is a high probability that the radome will survive the worst-case scenario of a no-spin fault condition at the end of mission.

Mikhaylov, Rebecca↗

Cross Kelvin force microscopy and conductive atomic force microscopy studies of organic bulk heterojunction blends for local morphology and electrical behavior analysis

Bulk Heterojunction (BHJ) organic photovoltaic devices performances depend on the relative organization and physical properties of the electron-donor and -acceptor materials. In this paper, BHJs of poly(3-hexyl-thiophene) (P3HT) associated with an electron acceptor material, 1-(3-methoxycarbonyl)-propyl-1-phenyl[6,6]C6 (PCBM) or [Ni(4dodpedt){sub 2}], are studied in terms of morphology, ordering, and electrical properties. First, comparison between the two BHJs performed by Atomic Force Microscopy (AFM) and Raman characterizations shows that P3HT structuration is improved by blending with [Ni(4dodpedt){sub 2}]. Then, the relationship between charges trapping, electrical properties, and film morphology is investigated using conductive AFM and Kelvin Force Microscopy. Measurements in dark condition and under solar cell simulator provide complementary information on electrical phenomena in these organic nanostructures. Finally, time dependent measurement highlights the influence of charges stacking on conduction. Specifically, we demonstrate that charge accumulation initiated by illumination remains valid after switching off the light, and induces the modification in current versus voltage characteristic of P3HT: PCBM blend. Finally, we observe a current increasing which can be attributed to the energy barrier decreasing due to charges trapping in PCBM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of mouse protocadherin 15 of the stereocilia tip link in complex with LHFPL5

Hearing and balance involve the transduction of mechanical stimuli into electrical signals by deflection of bundles of stereocilia linked together by protocadherin 15 (PCDH15) and cadherin 23 ‘tip links’. PCDH15 transduces tip link tension into opening of a mechano-electrical transduction (MET) ion channel. PCDH15 also interacts with LHFPL5, a candidate subunit of the MET channel. Here we illuminate the PCDH15-LHFPL5 structure, showing how the complex is composed of PCDH15 and LHFPL5 subunit pairs related by a 2-fold axis. The extracellular cadherin domains define a mobile tether coupled to a rigid, 2-fold symmetric ‘collar’ proximal to the membrane bilayer. LHFPL5 forms extensive interactions with the PCDH15 transmembrane helices and stabilizes the overall PCDH15-LHFPL5 assembly. Our studies illuminate the architecture of the PCDH15-LHFPL5 complex, localize mutations associated with deafness, and shed new light on how forces in the PCDH15 tether may be transduced into the stereocilia membrane.

Ge, Jingpeng↗

Light-Dependence of Formate (C1) and Acetate (C2) Transport and Oxidation in Poplar Trees

Although apparent light inhibition of leaf day respiration is a widespread reported phenomenon, the mechanisms involved, including utilization of alternate respiratory pathways and substrates and light inhibition of TCA cycle enzymes are under active investigation. Recently, acetate fermentation was highlighted as a key drought survival strategy mediated through protein acetylation and jasmonate signaling. Here, we evaluate the light-dependence of acetate transport and assimilation in Populus trichocarpa trees using the dynamic xylem solution injection (DXSI) method developed here for continuous studies of C1 and C2 organic acid transport and light-dependent metabolism. Over 7 days, 1.0 L of [13C]formate and [13C2]acetate solutions were delivered to the stem base of 2-year old potted poplar trees, while continuous diurnal observations were made in the canopy of CO2, H2O, and isoprene gas exchange together with δ13CO2. Stem base injection of 10 mM [13C2]acetate induced an overall pattern of canopy branch headspace 13CO2 enrichment (δ13CO2 +27‰) with a diurnal structure in δ13CO2 reaching a mid-day minimum followed by a maximum shortly after darkening where δ13CO2 values rapidly increased up to +12‰. In contrast, 50 mM injections of [13C]formate were required to reach similar δ13CO2 enrichment levels in the canopy with δ13CO2 following diurnal patterns of transpiration. Illuminated leaves of detached poplar branches pretreated with 10 mM [13C2]acetate showed lower δ13CO2 (+20‰) compared to leaves treated with 10 mM [13C]formate (+320‰), the opposite pattern observed at the whole plant scale. Following dark/light cycles at the leaf-scale, rapid, strong, and reversible enhancements in headspace δ13CO2 by up to +60‰ were observed in [13C2]acetate-treated leaves which showed enhanced dihydrojasmonic acid and TCA cycle intermediate concentrations. The results are consistent with acetate in the transpiration stream as an effective activator of the jasmonate signaling pathway and respiratory substrate. The shorter lifetime of formate relative to acetate in the transpiration stream suggests rapid formate oxidation to CO2 during transport to the canopy. In contrast, acetate is efficiently transported to the canopy where an increased allocation towards mitochondrial dark respiration occurs at night. The results highlight the potential for an effective integration of acetate into glyoxylate and TCA cycles and the light-inhibition of citrate synthase as a potential regulatory mechanism controlling the diurnal allocation of acetate between anabolic and catabolic processes.

59 BASIC BIOLOGICAL SCIENCES↗

Determination of Cell Doubling Times from the Return-on-Investment Time of Photosynthetic Vesicles Based on Atomic Detail Structural Models

Cell doubling times of the purple bacterium Rhodobacter sphaeroides during photosynthetic growth are determined experimentally and computationally as a function of illumination. For this purpose, energy conversion processes in an intracytoplasmic membrane vesicle, the chromatophore, are described based on an atomic detail structural model. The cell doubling time and its illumination dependence are computed in terms of the return-on-investment (ROI) time of the chromatophore, determined computationally from the ATP production rate, and the mass ratio of chromatophores in the cell, determined experimentally from whole cell absorbance spectra. The ROI time is defined as the time it takes to produce enough ATP to pay for the construction of another chromatophore. The ROI time of the low light-growth chromatophore is 4.5–2.6 h for a typical illumination range of 10–100 μmol photons m –2 s –1 , respectively, with corresponding cell doubling times of 8.2–3.9 h. Finally, when energy expenditure is considered as a currency, the benefit-to-cost ratio computed for the chromatophore as an energy harvesting device is 2–8 times greater than for photovoltaic and fossil fuel-based energy solutions and the corresponding ROI times are approximately 3–4 orders of magnitude shorter for the chromatophore than for synthetic systems.

09 BIOMASS FUELS↗

Ultra-stable Molecule-Surface Architectures at Metal Oxides: Structure, Bonding, and Electron-transfer Processes

Research funded by this project focused on the development of improved strategies for functionalization of metal oxides to enhance charge-transfer processes relevant to solar energy conversion. Initial studies included Fe 2 O 3 , WO 3 , TiO 2 , SnO 2 , and ZnO as model oxide systems; these systems were chosen due to differences in metal oxidation state and chemical bonding types in these oxides. Later studies focused largely on SnO 2 and ZnO, as these materials show particularly promising surface chemistry, have high electron mobility, and can be readily grown in both spherical nanoparticles and as elongated nanorods. New molecules were synthesized that allowed the direct chemical assembly of novel nanoparticle “dyadic” structures in which two different oxide materials are chemically joined, leading to an interface that enhances the separation of of charge upon illumination. We demonstrated that such junctions enhance photocatalytic efficiency using model organic compounds. A separate effort focused on novel approaches to linking dye molecules to SnO 2 and ZnO as a way to enhance solar conversion efficiency. A novel type of surface binding through a dithione compound was discovered that leads to highly stable light-absorbing interfaces on ZnO.

14 SOLAR ENERGY↗

Photoconductivity of transparent perovskite semiconductor BaSnO{sub 3} and SrTiO{sub 3} epitaxial thin films

We measured the photoconductivity of transparent semiconductor BaSnO{sub 3} and compared it with that of SrTiO{sub 3}. Epitaxial BaSnO{sub 3} and SrTiO{sub 3} films were grown on MgO substrates to exclude any contribution to photoconductivity from the substrate due to its large bandgap. In spite of the same perovskite structure and similar bandgap sizes (3.1–3.2 eV), the photoconductive behaviors of the two materials are quite different in terms of their magnitude and time dependence. The photoconductivity of BaSnO{sub 3} persists for many hours after removal from light exposure, whereas the photoconductivity of SrTiO{sub 3} shows little persistent conductivity. In addition, the photoconductivity of BaSnO{sub 3} increases to a value over 25 times higher than that of SrTiO{sub 3}, after 3 h of illuminations. The spectral photoconductive responses of both BaSnO{sub 3} and SrTiO{sub 3} show their highest peaks below 400 nm, suggesting that the electron-hole pair generation is the main mechanism of the photoconductivity for the both materials. The large persistent photoconductivity of BaSnO{sub 3} seems related with deep level defects with relatively large barriers for charge trapping and detrapping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overall energy conversion efficiency of a photosynthetic vesicle

The chromatophore of purple bacteria is an intracellular spherical vesicle that exists in numerous copies in the cell and that efficiently converts sunlight into ATP synthesis, operating typically under low light conditions. Building on an atomic-level structural model of a low-light-adapted chromatophore vesicle from Rhodobacter sphaeroides, we investigate the cooperation between more than a hundred protein complexes in the vesicle. The steady-state ATP production rate as a function of incident light intensity is determined after identifying quinol turnover at the cytochrome b c 1 complex (cyt b ⁢ c 1 ) as rate limiting and assuming that the quinone/quinol pool of about 900 molecules acts in a quasi-stationary state. For an illumination condition equivalent to 1% of full sunlight, the vesicle exhibits an ATP production rate of 82 ATP molecules/s. The energy conversion efficiency of ATP synthesis at illuminations corresponding to 1%–5% of full sunlight is calculated to be 0.12–0.04, respectively. The vesicle stoichiometry, evolutionarily adapted to the low light intensities in the habitat of purple bacteria, is suboptimal for steady-state ATP turnover for the benefit of protection against over-illumination.

10 SYNTHETIC FUELS↗

Optical switches based on CdS single nanowire

CdS nanowires have been synthesized by a composite-hydroxide-mediated approach. The characterization of the nanowire with X-ray diffraction, scanning electron microscopy, and transmission electron microscopy indicated a single-crystalline hexagonal structure growing along [21-bar 1-bar 0] direction with length up to 100 {mu}m. The UV-visible reflection spectrum demonstrated a band gap of 2.36 eV. A strong light emission centered at 543 nm was observed under different excitation wavelengths of 300, 320, 360 and 400 nm, which was further confirmed by a bright fluorescent imaging of a single CdS nanowire. The photocurrent response based on a single CdS nanowire showed distinct optical switch under the intermittent illumination of white light. The rise and decay time were less than 1.0 and 0.2 s, respectively, indicating high crystallization with fewer trap centers in the CdS nanowires. It is possible that the undesirable trapping effects on grain-boundaries for photoconductors could be avoided thanks to the single-crystalline nature of the CdS nanowires.

36 MATERIALS SCIENCE↗

Light-induced radical formation and isomerization of an aromatic thiol in solution followed by time-resolved x-ray absorption spectroscopy at the sulfur K-edge

Here, we applied time-resolved sulfur-1s absorption spectroscopy to a model aromatic thiol system as a promising method for tracking chemical reactions in solution. Sulfur-1s absorption spectroscopy allows tracking multiple sulfur species with a time resolution of ~70 ps at synchrotron radiation facilities. Experimental transient spectra combined with high-level electronic structure theory allow identification of a radical and two thione isomers, which are generated upon illumination with 267 nm radiation. Moreover, the regioselectivity of the thione isomerization is explained by the resulting radical frontier orbitals. This work demonstrates the usefulness and potential of time-resolved sulfur-1s absorption spectroscopy for tracking multiple chemical reaction pathways and transient products of sulfur-containing molecules in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New yellow Ba 0.93 Eu 0.07 Al 2 O 4 phosphor for warm-white light-emitting diodes through single-emitting-center conversion

Phosphor-converted white light-emitting diodes for indoor illumination need to be warm-white (i.e., correlated color temperature <4000 K) with good color rendition (i.e., color rendering index >80). However, no single-phosphor, single-emitting-center-converted white light-emitting diodes can simultaneously satisfy the color temperature and rendition requirements due to the lack of sufficient red spectral component in the phosphors’ emission spectrum. Here, we report a new yellow Ba 0.93 Eu 0.07 Al 2 O 4 phosphor that has a new orthorhombic lattice structure and exhibits a broad yellow photoluminescence band with sufficient red spectral component. Warm-white emissions with correlated color temperature <4000 K and color rendering index >80 were readily achieved when combining the Ba 0.93 Eu 0.07 Al 2 O 4 phosphor with a blue light-emitting diode (440–470 nm). This study demonstrates that warm-white light-emitting diodes with high color rendition (i.e., color rendering index >80) can be achieved based on single-phosphor, single-emitting-center conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Subdiffraction-resolution live-cell imaging for visualizing thylakoid membranes

© 2018 The Authors The Plant Journal © 2018 John Wiley & Sons Ltd The chloroplast is the chlorophyll-containing organelle that produces energy through photosynthesis. Within the chloroplast is an intricate network of thylakoid membranes containing photosynthetic membrane proteins that mediate electron transport and generate chemical energy. Historically, electron microscopy (EM) has been a powerful tool for visualizing the macromolecular structure and organization of thylakoid membranes. However, an understanding of thylakoid membrane dynamics remains elusive because EM requires fixation and sectioning. To improve our knowledge of thylakoid membrane dynamics we need to consider at least two issues: (i) the live-cell imaging conditions needed to visualize active processes in vivo; and (ii) the spatial resolution required to differentiate the characteristics of thylakoid membranes. Here, we utilize three-dimensional structured illumination microscopy (3D-SIM) to explore the optimal imaging conditions for investigating the dynamics of thylakoid membranes in living plant and algal cells. We show that 3D-SIM is capable of examining broad characteristics of thylakoid structures in chloroplasts of the vascular plant Arabidopsis thaliana and distinguishing the structural differences between wild-type and mutant strains. Using 3D-SIM, we also visualize thylakoid organization in whole cells of the green alga Chlamydomonas reinhardtii. These data reveal that high light intensity changes thylakoid membrane structure in C. reinhardtii. Moreover, we observed the green alga Chromochloris zofingiensis and the moss Physcomitrella patens to show the applicability of 3D-SIM. This study demonstrates that 3D-SIM is a promising approach for studying the dynamics of thylakoid membranes in photoautotrophic organisms during photoacclimation processes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Persistent photoconductivity and photo-responsible defect in 30 MeV-electron irradiated single crystal ZnO

Persistent photoconductivity (PPC) in 30-MeV electron irradiated ZnO single crystals is studied by excitation using light emitting diodes (LEDs) with various wavelengths. The decay transient of the photoconductivity shows relaxation times in the range of a few ten days for the illumination at 90 K and a few hours at room temperature. An electron paramagnetic resonance (EPR) signal with g-value = 2.005 appears after illumination of blue LED, suggesting the transfer from the artificially introduced oxygen vacancy of 2+ charge state to the metastable + charge state. Once generated, the metastable state does not immediately decay into the 2+ charge state because of energetic barriers of approx190 meV, supporting the mechanism of PPC proposed by Van de Walle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reduced Cu(InGa)Se 2 Thickness in Solar Cells Using a Superstrate Configuration

This project by the Institute of Energy Conversion (IEC) and the Department of Electrical and Computer Engineering at the University of Delaware sought to develop the technology and underlying science to enable reduced cost of Cu(InGa)Se 2 manufacturing by reducing the thickness of the Cu(InGa)Se 2 absorber layer by half compared to typical production. The approach to achieve this was to use the superstrate cell configuration in which light is incident on the cell through the glass. This structure facilitates optical enhancement approaches needed to achieve high efficiency with Cu(InGa)Se 2 thicknesses less than 1 µm. The primary objective was to demonstrate a Cu(InGa)Se 2 cell with absorber thickness 0.5 - 0.7 µm and 17% efficiency, along with a quantitative loss analysis to define a pathway to 20% efficiency. Additional objectives were the development of stable TCO and buffer layers or contact layers to withstand the Cu(InGa)Se 2 deposition temperature and of advanced optical enhancement methods. The underlying fundamental science needed to effectively transition these outcomes to large scale was addressed by extensive materials and device characterization and by development of comprehensive optical models. Two different superstrate configurations have been investigated. A frontwall cell is illuminated through the glass to the primary front junction of the device. This configuration has been used for previous efforts on superstrate Cu(InGa)Se 2 but performance has been limited by interdiffusion or reaction with CdS or other buffer layers. In this project, several approaches to overcome these limitations were explored using CdS, ZnO and ZnSe buffer layers. In each case, mechanisms that limit device performance were identified using detailed characterization of the materials and junctions. Due to the junction formation difficulties, efforts were concentrated on a new backwall configuration in which light is incident through the substrate into the back of the absorber layer. The primary junction is then formed after Cu(InGa)Se 2 deposition. This allows the potential benefits of superstrate cells for optical enhancement while maintaining processing advantages of the substrate configuration and avoiding the harmful effects of high temperature deposition on p-n junction formation. Backwall devices have outperformed substrate cells at absorber thicknesses of 0.1-0.5 µm through enhanced JSC due to easy incorporation of a Ag reflector and, with light incident on the absorber, the elimination of parasitic absorption in the CdS buffer. An efficiency of 9.7% has been achieved for a backwall Cu(InGa)Se 2 device with absorber thickness ~0.4 μm. A critical achievement that enabled implementation of the backwall cell was the development of a transparent back contact using MoO 3 or WO 3 . Processes for controlled deposition of each material by reactive rf sputtering from metal targets were developed. These contacts have wide bandgaps making them well-suited for application as contacts for backwall devices as well as potential use in bifacial cells and as the top cell of tandem CuInSe 2 -based devices. Optical enhancement will be critical for further improvements. Wet chemical texturing of ZnO films has been developed for a simple, low cost light-trapping scheme for backwall superstrate devices to enhance long wavelength quantum efficiency. An aqueous oxalic acid etch was developed and found to strongly texture sputtered ZnO with high haze ≈ 0.9 observed across the whole spectrum. And finally, advanced optical models have been developed to assist the characterization and optimization of Cu(InGa)Se 2 cells with thin absorbers

14 SOLAR ENERGY↗