Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Reducing Reaction Temperature, Steam Requirements, and Coke Formation During Methane Steam Reforming Using Electric Fields: A Microkinetic Modeling and Experimental Study

In this study, we approach several common problems with the Ni-catalyzed methane steam reformation reaction (MSR) using a two-pronged approach combining density functional theory (DFT) calculations with experimental work. Specifically, we look at the deactivation of a Ni catalyst due to coke formation, its high operating temperature requirements, and the high steam-to-methane (H 2 O/CH 4 ) ratio needed for proper MSR operation. A DFT-based microkinetic model was developed in the presence and absence of electric fields and the results were compared with experimental results. The microkinetic model shows that under various electric fields, the most favorable MSR mechanism changed slightly. It also shows that the presence of a positive electric field decreases the surface coverage of carbon, increases the water coverage, accelerates the rate-limiting step of the C-H bond cleavage in methane, and increases the desorption rates of the syngas product (CO + H 2 ) during MSR. Consequently, for a given methane conversion, a positive electric field allows for significantly lower H 2 O/CH 4 ratio and operating temperatures as compared to systems without an electric field. These findings correspond well with experimental tests under a variety of operating conditions. In addition, improvement in the catalytic activity due to the presence of a positive electric field remained significant even at industrially relevant applied pressures improving the hydrogen yield greatly. Overall, we find that an applied electric field can play a significant role in improving the catalytic activity of heterogeneous reactions. Here, this information can guide the design of heterogeneous reactions in the presence of an electric field. By utilizing the electric field generated by various renewable energy sources, electric field assisted heterogeneous reactions can open up a paradigm in future energy research.

03 NATURAL GAS↗

Poly-Amide Modified Copper Foam Electrodes for Enhanced Electrochemical Reduction of Carbon Dioxide

A strategy to modulate the electrocatalytic activity of copper toward CO 2 reduction involving adsorption of acrylamide, acrylic acid, and allylamine polymers is presented. Modification of electrodeposited copper foam with poly(acrylamide) leads to a significant enhancement in faradaic efficiency for ethylene from 13% (unmodified foam) to 26% at -0.96 V vs RHE, whereas methane yield is unaffected. Effects from crystalline phase distribution and copper oxide phases are ruled out as the source of enhancement through XPS and in situ XRD analysis. DFT calculations reveal that poly(acrylamide) adsorbs on the copper surface via the oxygen atom on the carbonyl groups and enhances ethylene formation by (i) charge donation to the copper surface that activates CO for dimerization, (ii) chemical stabilization of the CO dimer (a key intermediate for C 2 products) by hydrogen-bond interactions with the -NH 2 group, and (iii) facilitating the adsorption of CO molecules near the polymer, increasing local surface coverage. Poly(acrylamide) with copper acts as a multipoint binding catalytic system where the interplay between activation and stabilization of intermediates results in enhanced selectivity toward ethylene formation. Finally, modification with poly(acrylic acid) which has a similar structure to poly(acrylamide) also shows some enhancement in activity but is unstable, whereas poly(allylamine) completely suppresses CO 2 reduction in favor of the hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimerization of Linear Butenes on Zeolite-Supported Ni 2+

Nickel- and alkali-earth-modified LTA based zeolites catalyze the dimerization of 1-butene in the absence of Bronsted acid sites. The catalyst reaches over 95% selectivity to n-octenes and methylheptenes. The ratio of these two dimers is markedly influenced by the parallel isomerization of 1-butene to 2-butene, shifting the methylheptene/octene ratio from 0.7 to 1.4 as the conversion increases to 35%. At this conversion, the thermodynamic equilibrium of 90% cis- and trans-2-butenes is reached. Conversion of 2-butene results in methylheptene and dimethylhexene with rates that are 1 order of magnitude lower than those with 1-butene. The catalyst is deactivated rapidly by strongly adsorbed products in the presence of 2-butene. The presence of pi-allyl-bound butene and Ni-alkyl intermediates was observed by IR spectroscopy, suggesting both to be reaction intermediates in isomerization and dimerization. Product distribution and apparent activation barriers suggest 1-butene dimerization to occur via a 1'-adsorption of the first butene molecule and a subsequent 1'- or 2'-insertion of the second butene to form octene and methylheptene, respectively. The reaction order of 2 for 1-butene and its high surface coverage suggest that the rate-determining step involves two wealdy adsorbed butene molecules in addition to the more strongly held butene.

Ehrmaier, Andreas↗

Functionalized Metal–Organic Framework Thin Films for Stable and Efficient Electrochemical Water Oxidation under Near-Neutral Conditions

The development of molecularly modified metal− organic frameworks (MOFs) for electrochemical water oxidation has emerged as a promising strategy for efficient artificial photosynthesis. In this study, a ruthenium-based water oxidation catalyst (WOC) was incorporated into the UiO-67 framework, forming RuM−UiO-67 films grown directly on conductive FTO substrates. These modified films demonstrate efficient water oxidation activity at near-neutral pH (pH 6), operating at a low overpotential of ∼600 mV. The catalyst exhibits a turnover frequency (TOF) of (0.32 ± 0.02) s −1 at 1.5 V versus the normal hydrogen electrode (NHE) in buffered solution (pH 6) for the oxygen evolution reaction. Notably, incorporation into the MOF results in a 12-fold increase in electroactive surface coverage compared to a monolayer of the same catalyst on bare FTO. Faradaic efficiency analysis revealed incomplete conversion to O 2 , and follow-up iodometric analysis confirmed the formation of H 2 O 2 as a competing two-electron oxidation product during electrocatalysis. These results highlight the utility of MOF-based architectures for maximizing the catalyst accessibility and stability under electrochemical water oxidation conditions.

catalysts↗

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymers at Liquid/Vapor Interface

Polymers confined to the liquid/vapor interface are studied using molecular dynamics simulations. We show that for polymers which are weakly immiscible with the solvent, the density profile perpendicular to the liquid/vapor interface is strongly asymmetric. On the vapor side of the interface, the density distribution falls off as a Gaussian with a decay length on the order of the bead diameter, whereas on the liquid side, the density profile decays as a simple exponential. This result differs from that of a polymer absorbed from a good solvent with the density profile decaying as a power law. In conclusion, as the surface coverage increases, the average end-to-end distance and chain mobility systematically decreases toward that of the homopolymer melt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bottlebrush Polymers at Liquid Interfaces: Assembly Dynamics, Mechanical Properties, and All-Liquid Printed Constructs

Bottlebrush polymer surfactants (BPSs), formed by the interfacial interactions between bottlebrush polymers (BPs) with poly(acrylic acid) side chains dissolved in an aqueous phase and amine-functionalized ligands dissolved in the oil phase, assemble and bind strongly to the fluid-fluid interface. The ratio between N BB (backbone degree of polymerization) and N SC (side chain degree of polymerization) defines the initial assembly kinetics, interface packing efficiency, and stress relaxation. The equilibrium interfacial tension (γ) increases when N BB < N SC , but decreases when N BB $\gg$ N SC , correlating to a pronounced change in the effective shape of the BPs from being spherical to worm-like structures. The apparent surface coverage (ASC), i.e., the interfacial packing efficiency, decreases as N BB increases. The dripping-to-jetting transition of an injected polymer solution, as well as fluorescence recovery after photobleaching experiments, revealed faster initial assembly kinetics for BPs with higher N BB . Furhter, Euler buckling of BPS assemblies with different N BB values was used to characterize the stress relaxation behavior and bending modulus. The stress relaxation behavior was directly related to the ASC, reflecting the strong influence of macromolecular shape on packing efficiency. The bending modulus of BPSs decreases for N BB < N SC , but increased when N BB $\gg$ N SC , showing the effect of molecular architecture and multisite anchoring. All-liquid printed constructs with lower N BB BPs yielded more stable structured liquids, underscoring the importance of macromolecular packing efficiency at fluid interfaces. Overall, this work elucidates fundamental relationships between nanoscopic structures and macroscopic properties associated with various bottlebrush polymer architectures, which translate to the stabilization of all-fluidic printed constructs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Hydrogenation of Alkylphenols for Renewable Caprolactone

Selective hydrogenation of lignin-derived alkyl-phenol to alkyl-cyclohexanone is a key step in the synthesis of renewable caprolactone from lignin-derived monomers. Selective hydrogenation of p-cresol, a model compound for lignin-derived monomers, to 4-methyl-cyclohexanone was conducted using Pd/γ-Al 2 O 3 in a continuous three-phase flow reactor with side products of 4-methyl cyclohexanol. High conversion (85%) and selectivity (>93%) were demonstrated at ambient reaction pressure. Evaluation of the hydrogenation at different reaction parameters showed that the reaction selectivity was determined by the surface coverage of p-cresol and 4-methyl cyclohexanone. Furthermore, high selectivity to 4-methyl cyclohexanone was also attributed to the lower apparent activation barrier of p-cresol hydrogenation (67 ± 2 kJ mol –1 ) compared to that of hydrogenation 4-methyl cyclohexanone (92 ± 11 kJ mol –1 ), with a faster rate of initial hydrogenation of p-cresol relative to carbonyl hydrogenation of 4-methyl-cyclohexanone.

36 MATERIALS SCIENCE↗

Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO 2 and Alkali-Promoted Mg 3 AlO x Mixed Oxide Catalytic Sorbents

Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO 2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO 2 catalyst and Mg 3 AlO x sorbent with and without alkali modification are evaluated for CO 2 adsorption, steady-state catalysis with cofed CO 2 and H 2 , and transient RCC performance. A catalyst composed of a physical mixture of Mg 3 AlO x with ZnZrO 2 resulted in a slight increase in CO 2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO 2 alone. In contrast, Na impregnation significantly increased the level of CO 2 uptake from 0.28 mmol/g (ZnZrO 2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg 3 AlO x , respectively. However, Na impregnation reduced the CO 2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO 2 and H 2 surface coverages, favoring CH 4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO 2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO 2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO 2 +10%Na/Mg 3 AlO x , achieved a CO 2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Investigation of the Sustainable Electrocatalytic Hydrogenation of Benzaldehyde on Pd/C: Effect of Electrolyte Composition and Half-Cell Potentials

The electrocatalytic reduction of benzaldehyde to benzyl alcohol on Pd supported on a carbon felt was conducted in the aqueous phase using a continuous flow fixed bed reactor at room temperature and atmospheric pressure. Methanol, ethanol, or isopropanol were added to the electrolyte to study the impact of alcohol type and concentration on the rates of benzaldehyde electrocatalytic hydrogenation and H2 evolution, the prevalent side reaction. Whereas the electrocatalytic hydrogenation rates and Faradaic efficiency decreased with increasing alcohol concentrations, the H2 evolution rates remained constant. The impact of the alcohol on hydrogenation was greater as the length of the alcohol’s hydrocarbon chain increased. Increasing the benzaldehyde concentration allows for high electrocatalytic hydrogenation rates, and high Faradaic efficiency. The reaction order increased from ~0.13 to ~0.66 with half-cell potential increasing from -650 mV to -1150 mV (vs. Ag/AgCl). A kinetic analysis reveals that the changes in reaction order are due to changes in benzaldehyde (and H) surface coverages as a function of half-cell cathodic potential. Thus, the results shown here reveal how the performance of the continuous electrocatalytic operation is affected by the electrolyte composition and half-cell cathodic potential.

electrocatalytic reduction, alcohols, benzaldehyde↗

Kinetics of the reaction of hydrated lime with SO{sub 2} at low temperatures: effects of the presence of CO{sub 2}, O{sub 2}, and NOx

The effects of the presence Of CO{sub 2}, O{sub 2}, and NOx in the flue gas on the kinetics of the sulfation of hydrated lime at low temperatures were studied using a differential fixed-bed reactor. When O{sub 2} and NOx were not present together the reaction kinetics was about the same as that under gas mixtures containing SO{sub 2}, H{sub 2}O, and N2 only. When both O{sub 2} and NOx were present, sulfation of hydrated lime was greatly enhanced, forming a large amount of calcium sulfate in addition to calcium sulfite. Sulfation of hydrated lime was well described by the surface coverage model, despite the gas-phase conditions being different. Relative humidity is the major factor affecting the reaction, and its effect was more marked when both O{sub 2} and NOx were present. The kinetic model equations obtained in this work can be used to describe the sulfation of hydrated lime in the low-temperature dry and semidry flue gas desulfurization processes with or without an upstream NOx removal unit.

01 COAL, LIGNITE, AND PEAT↗

Self-Assembled Monolayers of n-Alkanethiols Suppress Hydrogen Evolution and Increase the Efficiency of Rechargeable Iron Battery Electrodes

Iron-based rechargeable batteries, because of their low cost, eco-friendliness, and durability, are extremely attractive for large-scale energy storage. A principal challenge in the deployment of these batteries is their relatively low electrical efficiency. The low efficiency is due to parasitic hydrogen evolution that occurs on the iron electrode during charging and idle stand. In this study, we demonstrate for the first time that linear alkanethiols are very effective in suppressing hydrogen evolution on alkaline iron battery electrodes. The alkanethiols form self-assembled monolayers on the iron electrodes. The degree of suppression of hydrogen evolution by the alkanethiols was found to be greater than 90%, and the effectiveness of the alkanethiol increased with the chain length. Through steady-state potentiostatic polarization studies and impedance measurements on high-purity iron disk electrodes, we show that the self-assembly of alkanethiols suppressed the parasitic reaction by reducing the interfacial area available for the electrochemical reaction. We have modeled the effect of chain length of the alkanethiol on the surface coverage, charge-transfer resistance, and double-layer capacitance of the interface using a simple model that also yields a value for the interchain interaction energy. We have verified the improvement in charging efficiency resulting from the use of the alkanethiols in practical rechargeable iron battery electrodes. The results of battery tests indicate that alkanethiols yield among the highest faradaic efficiencies reported for the rechargeable iron electrodes, enabling the prospect of a large-scale energy storage solution based on low-cost iron-based rechargeable batteries.

Malkhandi, S↗

Coherent Acoustic Interferometry during the Photodriven Oxygen Evolution Reaction Associates Strain Fields with the Reactive Oxygen Intermediate (Ti–OH*)

The oxygen evolution reaction (OER) from water requires the formation of metastable, reactive oxygen intermediates to enable oxygen–oxygen bond formation. Conversely, such reactive intermediates could also structurally modify the catalyst. Here, a descriptor for the overall catalytic activity, the first electron and proton transfer OER intermediate from water, (M–OH*), has been associated with significant distortions of the metal–oxygen bonds upon charge-trapping. Time-resolved spectroscopy of in situ, photodriven OER on transition metal oxide surfaces has characterized M–OH* for the charge trapping and the symmetry of the lattice distortions by optical and vibrational transitions, respectively, but had yet to detect an interfacial strain field arising from a surface coverage M–OH*. Here, we utilize picosecond, coherent acoustic interferometry to detect the uniaxial strain normal to the SrTiO 3 /aqueous interface directly caused by Ti–OH*. The spectral analysis applies a fairly general methodology for detecting a combination of the spatial extent, magnitude, and generation time of the interfacial strain through the coherent oscillations’ phase. For lightly n-doped SrTiO 3 , we identify the strain generation time (1.31 ps), which occurs simultaneously with Ti–OH* formation, and a tensile strain of 0.06% (upper limit 0.6%). In addition to fully characterizing this intermediate across visible, mid-infrared, and now GHz-THz probes on SrTiO 3 , we show that strain fields occur with the creation of some M–OH*, which modifies design strategies for tuning catalytic activity and provides insight into photo-induced degradation so prevalent for OER. To that end, the work put forth here provides a unique methodology to characterize intermediate-induced interfacial strain across OER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multivariate Bayesian Optimization of CoO Nanoparticles for CO 2 Hydrogenation Catalysis

The hydrogenation of CO 2 holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO 2 hydrogenation, with performance heavily reliant on crystal phase and morphology. Achieving precise control over these catalyst attributes through colloidal nanoparticle synthesis could pave the way for catalyst and process advancement. Yet, navigating the complexities of colloidal nanoparticle syntheses, governed by numerous input variables, poses a significant challenge in systematically controlling resultant catalyst features. We present a multivariate Bayesian optimization, coupled with a data-driven classifier, to map the synthetic design space for colloidal CoO nanoparticles and simultaneously optimize them for multiple catalytically relevant features within a target crystalline phase. The optimized experimental conditions yielded small, phase-pure rock salt CoO nanoparticles of uniform size and shape. These optimized nanoparticles were then supported on SiO 2 and assessed for thermocatalytic CO 2 hydrogenation against larger, polydisperse CoO nanoparticles on SiO 2 and a conventionally prepared catalyst. The optimized CoO/SiO 2 catalyst consistently exhibited higher activity and CH 4 selectivity (ca. 98%) across various pretreatment reduction temperatures as compared to the other catalysts. This remarkable performance was attributed to particle stability and consistent H* surface coverage, even after undergoing the highest temperature reduction, achieving a more stable catalytic species that resists sintering and carbon occlusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photooxidation and Photodesorption in the Photochemistry of Isobutene on TiO2(110)

The photochemistry of isobutene was examined on the rutile TiO2(110) surface as a function of the surface pretreatment condition and irradiation temperature using temperature programmed desorption (TPD) and photon stimulated desorption (PSD). Isobutene adsorbs molecularly on the clean TiO2(110) surface without detectable thermal decomposition. Preadsorption of oxygen, either as atoms or chemisorbed molecules, did not promote thermal reactions with isobutene, but instead blocked isobutene adsorption sites. Ultraviolet (UV) light irradiation of isobutene adsorbed on the clean surface led to depletion through photodesorption without significant photodecomposition. Isobutene PSD yields increased with increasing surface temperature suggesting that activated molecules sample their physisorbed potential energy surface during photodesorption. Preadsorption of oxygen promoted partial photooxidation of adsorbed isobutene to acetone, methacrolein and isobutanal. Acetone was only detected when molecular oxygen was present, indicating that O2 addition occurred across the C=C bond. In contrast, results from use of D6-isobutene indicated that coadsorption with either O adatoms or O2 molecules led to photochemical production of methacrolein (and likely isobutanal) through C-H bond cleavage on a methyl group. Irradiation an adlayer comprised of isobutene isolated from the surface by 1 ML of preadsorbed O2 showed the most photoconversion of isobutene, which suggests that photoactivation of adsorbed O2 is a key step in partial photooxidation of isobutene. Comparison of the isobutene PSD and oxidation product yields as a function of surface temperature between 20 and 120 K indicates a competition between photooxidation and photodesorption that varies with temperature. ‘Direct’ charge transfer events between isobutene and the surface, favored at higher temperature, compete with partial oxidation pathways initiated by ‘indirect’ activation of isobutene by O2, which is favored at low temperature. Access of O2 to the surface is critical to achieving desired isobutene photooxidation rates and products, and isobutene photodesorption may provide a means of regulating the isobutene surface coverage. Work reported here was supported by the U.S. Department of Energy, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences, and performed in the Williams R. Wiley Environmental Molecular Science Laboratory (EMSL), a Department of Energy user facility funded by the Office of Biological and Environmental Research. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for the U.S. Department of Energy by the Battelle Memorial Institute under contract DEAC05-76RL01830.

Environmental Molecular Sciences Laboratory↗

Fischer Tropsch synthesis : an in-situ TPR-EXAFS/XANES investigation of the influence of Group I alkali promoters on the local atomic and electronic structure of carburized iron/silica catalysts.

The promoting impact of alkali metals (i.e., Li, Na, K, Rb, Cs) on the carburization rate of Fe in Fe/Si catalysts was investigated by X-ray absorption spectroscopy. A multisample holder was used, allowing nearly simultaneous examination of the catalysts during activation in a CO/He mixture. With the white line intensity and shape as a fingerprint for oxidation state, TPR/XANES analysis enabled us to measure the relative composition of the different compounds as a function of the carburization time, temperature, and atomic number of the group 1 promoter. At the same time, TPR/EXAFS provided information on the changes in local atomic structure that accompanied the oxidation state changes. The rate of carburization increased in the following order: unpromoted < Li < Na < K = Rb = Cs. After 10 h of treatment the samples containing K, Rb, and Cs were completely carburized, and residual quantities of iron oxides were detected in both unpromoted and Li-promoted samples. The EXAFS spectra after carburization could be fitted well by considering a model containing Hagg carbide and Fe{sub 3}O{sub 4}. After 10 h of CO/He treatment at 290 C, the main component observed was Hagg carbide. A model containing Hagg and {var_epsilon}-carbides, and Fe{sub 3}O{sub 4}, was also investigated. However, the r-factor was not significantly impacted by including {var_epsilon}-carbide in the fitting, and the resulting contribution of {var_epsilon}-carbide in each catalyst from the model was virtually negligible. Selectivity differences are thus not likely due to changes in the carbide distribution. Rather, the alkali promoter increases the CO dissociative adsorption rate, resulting in an increase in the surface coverage of dissociated CO and an inhibition in the olefin readsorption rate. This in turn results in higher olefin selectivities, in agreement with previous catalytic tests.

01 COAL, LIGNITE, AND PEAT↗

Effects of Oxygen-Containing Functional Groups on Supercapacitor Performance

Molecular dynamics (MD) simulations of the interface between graphene and the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIM OTf) were carried out to gain molecular-level insights into the performance of graphene-based supercapacitors and, in particular, determine the effects of the presence of oxygen-containing defects at the graphene surface on their integral capacitance. The MD simulations predict that increasing the surface coverage of hydroxyl groups negatively affects the integral capacitance, whereas the effect of the presence of epoxy groups is much less significant. The calculated variations in capacitance are found to be directly correlated to the interfacial structure. Indeed, hydrogen bonding between hydroxyl groups and SO3 anion moieties prevents BMIM+ and OTf- molecules from interacting favorably in the dense interfacial layer and restrains the orientation and mobility of OTf- ions, thereby reducing the permittivity of the ionic liquid at the interface. The results of the molecular simulations can facilitate the rational design of electrode materials for supercapacitors.

Environmental Molecular Sciences Laboratory↗