Search NASA⌕ Search

SEARCH · Search NASA

Results for “Value Chain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

L-asparagine crystals with wide gap semiconductor features: Optical absorption measurements and density functional theory computations

Results of optical absorption measurements are presented together with calculated structural, electronic, and optical properties for the anhydrous monoclinic L-asparagine crystal. Density functional theory (DFT) within the generalized gradient approximation (GGA) including dispersion effects (TS, Grimme) was employed to perform the calculations. The optical absorption measurements revealed that the anhydrous monoclinic L-asparagine crystal is a wide band gap material with 4.95 eV main gap energy. DFT-GGA+TS simulations, on the other hand, produced structural parameters in very good agreement with X-ray data. The lattice parameter differences Δa, Δb, Δc between theory and experiment were as small as 0.020, 0.051, and 0.022 Å, respectively. The calculated band gap energy is smaller than the experimental data by about 15%, with a 4.23 eV indirect band gap corresponding to Z → Γ and Z → β transitions. Three other indirect band gaps of 4.30 eV, 4.32 eV, and 4.36 eV are assigned to α3 → Γ, α1 → Γ, and α2 → Γ transitions, respectively. Δ-sol computations, on the other hand, predict a main band gap of 5.00 eV, just 50 meV above the experimental value. Electronic wavefunctions mainly originating from O 2p–carboxyl, C 2p–side chain, and C 2p–carboxyl orbitals contribute most significantly to the highest valence and lowest conduction energy bands, respectively. By varying the lattice parameters from their converged equilibrium values, we show that the unit cell is less stiff along the b direction than for the a and c directions. Effective mass calculations suggest that hole transport behavior is more anisotropic than electron transport, but the mass values allow for some charge mobility except along a direction perpendicular to the molecular layers of L-asparagine which form the crystal, so anhydrous monoclinic L-asparagine crystals could behave as wide gap semiconductors. Finally, the calculations point to a high degree of optical anisotropy for the absorption and complex dielectric function, with more structured curves for incident light polarized along the 100 and 101 directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local dynamics of proteins and DNA evaluated from crystallographic B factors

Distributions of scaled B factors from 704 protein–DNA complexes reflect primarily the neighbourhood of amino-acid and nucleotide residues: their flexibility grows from the protein core to protein–protein and protein–DNA interfaces, to solvent-exposed residues. Some of the findings clearly observed at higher resolution structures can no longer be observed for structures at low resolution indicating problems in refinement protocols. The dynamics of protein and nucleic acid structures is as important as their average static picture. The local molecular dynamics concealed in diffraction images is expressed as so-called B factors. To find out how the crystal-derived B factors represent the dynamic behaviour of atoms and residues of proteins and DNA in their complexes, the distributions of scaled B factors from a carefully curated data set of over 700 protein–DNA crystal structures were analyzed [Schneider et al. (2014 ▶), Nucleic Acids Res.42, 3381–3394]. Amino acids and nucleotides were categorized based on their molecular neighbourhood as solvent-accessible, solvent-inaccessible (i.e. forming the protein core) or lying at protein–protein or protein–DNA interfaces; the backbone and side-chain atoms were analyzed separately. The B factors of two types of crystal-ordered water molecules were also analyzed. The analysis confirmed several expected features of protein and DNA dynamics, but also revealed surprising facts. Solvent-accessible amino acids have B factors that are larger than those of residues at the biomolecular interfaces, and core-forming amino acids are the most restricted in their movement. A unique feature of the latter group is that their side-chain and backbone atoms are restricted in their movement to the same extent; in all other amino-acid groups the side chains are more floppy than the backbone. The low values of the B factors of water molecules bridging proteins with DNA and the very large fluctuations of DNA phosphates are surprising. The features discriminating different types of residues are less pronounced in structures with lower crystallographic resolution. Some of the observed trends are likely to be the consequence of improper refinement protocols that may need to be rectified.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bayesian uncertainty quantification of tristructural isotropic particle fuel silver release: Decomposing model inadequacy plus experimental noise and parametric uncertainties

Tristructural isotropic (TRISO) particle fuel is one of the most promising fuel concepts enabling high temperature and high burnup reactor operation. One dominant source of radioactivity released from the TRISO particles is silver (Ag), which is subject to a high release fraction and long decay life compared to other fission products. Previous modeling efforts using the fuel performance code BISON indicated nonnegligible uncertainties in modeling the diffusion process of fission products in TRISO compared to the Advanced Gas Reactor experiments. The overall uncertainties observed when modeling the fission product diffusion can result from uncertainties in model parameters, noisy experimental measurements, and deficiencies in the developed models. The three types of underlying uncertainties have not yet been properly quantified in open literature. Here, this paper presents the Bayesian uncertainty quantification (UQ) using massively parallelizable Markov chain Monte Carlo samplers. The uncertainties due to model parameters, model inadequacy, and experimental measurement noise are quantified, with the σ term used to represent the sum of the model inadequacy and measurement noise uncertainties. It is worth noting that this is the first time the σ term is inferred for nuclear fuel experiments, as compared to using prescribed values for uncertainty quantification in previous work. The parallelizable Markov chain Monte Carlo samplers efficiently infer the model parameters and the σ term, giving insight into physical parameters like diffusion coefficients and the combined model discrepancy and measurement noise. A subsequent forward uncertainty quantification (UQ) is also performed based on the calibration results to generate more accurate predictions of the Ag release. The model inadequacy plus experimental noise is the most dominant source of uncertainty compared to the parametric uncertainty. All the UQ analyses presented in this work are based on the second series of the irradiation experiments in the Advanced Gas Reactor program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Combining Reclaimed PET with Bio-Based Monomers Enables Plastics Upcycling

Less than 30% of PET plastic is recycled in the United States. The low reclamation rate may be due to mechanical recycling accounting for the majority of commercial PET recycling. Mechanical recycling yields a lower-quality recycled plastic than the process of chemically recycling back to the monomer phase, which can be energetically and economically expensive. In this work, recently published in Joule, reclaimed PET bottles are chemically recycled and converted into higher-value fiberglass-reinforced plastics (FRPs).This presentation will focus on the supply-chain level energy and greenhouse gas emissions intensities associated with this novel upcycling route. The Materials Flows through Industry supply chain analysis tool, developed at NREL, is used to estimate these impacts. Depending on the extent and speed of adoption, this strategy for plastic upcycling could lead to significant energy usage and emissions reductions over the traditional FRP supply chain. Overall, this approach may provide an economic incentive for plastics recycling and renewable feedstock use through the creation of higher-value FRPs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Highly Stable, Anion Conductive, Comb-Shaped Copolymers for Alkaline Fuel Cells

To produce an anion-conductive and durable polymer electrolyte for alkaline fuel cell applications, a series of quaternized poly(2,6-dimethyl phenylene oxide)s containing long alkyl side chains pendant to the nitrogen-centered cation were synthesized using a Menshutkin reaction to form comb-shaped structures. The pendant alkyl chains were responsible for the development of highly conductive ionic domains, as confirmed by small-angle X-ray scattering (SAXS). The comb-shaped polymers having one alkyl side chain showed higher hydroxide conductivities than those with benzyltrimethyl ammonium moieties or structures with more than one alkyl side chain per cationic site. The highest conductivity was observed for comb-shaped polymers with benzyldimethylhexadecyl ammonium cations. The chemical stabilities of the comb-shaped membranes were evaluated under severe, accelerated-aging conditions, and degradation was observed by measuring IEC and ion conductivity changes during aging. The comb-shaped membranes retained their high ion conductivity in 1 M NaOH at 80 degrees C for 2000 h. These cationic polymers were employed as ionomers in catalyst layers for alkaline fuel cells. The results indicated that the C-16 alkyl side chain ionomer had a slightly better initial performance, despite its low IEC value, but very poor durability in the fuel cell. In contrast, 90% of the initial performance was retained for the alkaline fuel cell with electrodes containing the C-6 side chain after 60 h of fuel cell operation.

Li, NW↗

Quantum criticality among entangled spin chains

Here, an important challenge in magnetism is the unambiguous identification of a quantum spin liquid, of potential importance for quantum computing. In such a material, the magnetic spins should be fluctuating in the quantum regime, instead of frozen in a classical long-range-ordered state. While this requirement dictates systems wherein classical order is suppressed by a frustrating lattice, an ideal system would allow tuning of quantum fluctuations by an external parameter. Conventional three-dimensional antiferromagnets can be tuned through a quantum critical point—a region of highly fluctuating spins—by an applied magnetic field. Such systems suffer from a weak specific-heat peak at the quantum critical point, with little entropy available for quantum fluctuations. Here we study a different type of antiferromagnet, comprised of weakly coupled antiferromagnetic spin-1/2 chains as realized in the molecular salt K 2 PbCu(NO 2 ) 6 . Across the temperature–magnetic field boundary between three-dimensional order and the paramagnetic phase, the specific heat exhibits a large peak whose magnitude approaches a value suggestive of the spinon Sommerfeld coefficient of isolated quantum spin chains. These results demonstrate an alternative approach for producing quantum matter via a magnetic-field-induced shift of entropy from one-dimensional short-range order to a three-dimensional quantum critical point.

36 MATERIALS SCIENCE↗

Chain Formation as a Mechanism for Mass-Independent Fractionation of Sulfur Isotopes in the Archean Atmosphere

The anomalous abundances of sulfur isotopes in ancient sediments provide the strongest evidence for an anoxic atmosphere prior to ∼2.45 Ga, but the mechanism for producing this 'mass-independent' fractionation pattern remains in question. The prevailing hypothesis has been that it is created by differences in the UV photolysis rates of different SO2 isotopologues. We investigate here a recently proposed additional source of fractionation during gas-phase formation of elemental sulfur (S4 and S8). Because two minor S isotopes rarely occur in the same chain, the longer S4 and S8 chains should be strongly, and roughly equally, depleted in all minor isotopes. This gives rise to negative ∆(sup 33) S values and positive ∆(sub 36) S values in elemental sulfur-just the opposite of (and much larger than) what is predicted from SO2 photolysis itself. Back-reactions during chain formation, specifically photolysis of S2 and S3, pass sulfur having the opposite fractionation back to atomic S, and thence to other sulfur species, causing H2S, SO2, sulfate, and short-chain elemental sulfur to have positive ∆(sup 33) S and negative ∆(sup 36) S. Positive ∆(sup 33) S values in elemental sulfur produced in laboratory SO2 photolysis experiments could be caused by the initial fractionation during photolysis, combined with rapid condensation of short-chain sulfur species on the walls of the reaction chamber, along with a scarcity of back-reactions. The simulated fractionations produced by the chain formation mechanism do not directly match fractionations from the rock record. The mismatch might be explained if the isotopic signals leaving the atmosphere were significantly modulated by life, by uncertainties in the rates of reactions of both major and minor isotopic sulfur species, or by the relatively large potential range of atmospheric parameters. Further work is needed to better constrain these uncertainties, but this novel mechanism suggests new avenues to explore in our search for a explanation for the S-MIF record.

Great Oxidation Event↗

Formation and structural phase transition in Co atomic chains on a Cu(775) surface

The formation of Co atomic chains on a Cu(775) surface is investigated by the kinetic Monte Carlo method. It is found that the length of Co atomic chains formed as a result of self-organization during epitaxial growth is a random quantity and its mean value depends on the parameters of the experiment. The existence of two structural phases in atomic chains is detected using the density functional theory. In the first phase, the separations between an atom and its two nearest neighbors in a chain are 0.230 and 0.280 nm. In the second phase, an atomic chain has identical atomic spacings of 0.255 nm. It is shown that the temperature of the structural phase transition depends on the length of the atomic chain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isotopic dependence of the nuclear charge radii and binding energies in the relativistic Hartree-Fock formalism

Relativistic nonlinear models based on the Hartree and Hartree-Fock approximations, including the {sigma}, {omega}, {pi}, and {rho} mesons, are worked out to explore the behavior of the nuclear charge radii and the binding energies of several isotopic chains. We find a correlation between the magnitude of the anomalous kink effect (KE) in the Pb isotopic family and the compressibility modulus (K) of nuclear matter. The KE appears to be sensitive, in particular, to the mechanisms which control the K value. The influence of the symmetry energy on the Ca isotopic chain is also studied. The behavior of the charge radii of single-particle states for some special cases and its repercussion on the nuclear charge radius is analyzed. The effect of pairing correlations on the models improves considerably the quality of the results in both binding energy and KE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Majorana modes with side features in magnet-superconductor hybrid systems

Magnet-superconductor hybrid (MSH) systems represent promising platforms to host Majorana zero modes (MZMs), the elemental building blocks for fault-tolerant quantum computers. Theoretical description of such MSH structures is mostly based on simplified models, not accounting for the complexity of real materials. Here, based on density functional theory, we derive a superconducting 80-band model to study an MSH system consisting of a magnetic manganese chain on the s wave superconductor niobium. For a wide range of values of the superconducting order parameter, the system is a topological superconductor, with MZMs exhibiting non-universal spatial patterns and a drastic accumulation of spectral weight on both sides along the magnetic chain. These side feature states can be explained by an effective model which is guided by the ab initio results. Performing scanning tunneling spectroscopy experiments on the same system, we observe a spatial structure in the low-energy local density of states that is consistent with the theoretical findings. Our results open a first-principle approach to the discovery of topological superconductors.

36 MATERIALS SCIENCE↗

Interactions at the Dimer Interface Influence the Relative Efficiencies for Purine Nucleotide Synthesis and Pyrophosphorolysis in a Phosphoribosyltransferase

Enzymes that salvage 6-oxopurines, including hypoxanthine phosphoribosyltransferases (HPRTs), are potential targets for drugs in the treatment of diseases caused by protozoan parasites. For this reason, a number of high-resolution X-ray crystal structures of the HPRTs from protozoa have been reported. Although these structures did not reveal why HPRTs need to form dimers for catalysis, they revealed the existence of potentially relevant interactions involving residues in a loop of amino acid residues adjacent to the dimer interface, but the contributions of these interactions to catalysis remained poorly understood. The loop, referred to as active-site loop I, contains an unusual non-proline cis-peptide and is composed of residues that are structurally analogous with Leu67, Lys68, and Gly69 in the human HPRT. Functional analyses of site-directed mutations (K68D, K68E, K68N, K68P, and K68R) in the HPRT from Trypanosoma cruzi, etiologic agent of Chagas disease, show that the side-chain at position 68 can differentially influence the K{sub m} values for all four substrates as well as the k{sub cat} values for both IMP formation and pyrophosphorolysis. Also, the results for the K68P mutant are inconsistent with a cis-trans peptide isomerization-assisted catalytic mechanism. These data, together with the results of structural studies of the K68R mutant, reveal that the side-chain of residue 68 does not participate directly in reaction chemistry, but it strongly influences the relative efficiencies for IMP formation and pyrophosphorolysis, and the prevalence of lysine at position 68 in the HPRT of the majority of eukaryotes is consistent with there being a biological role for nucleotide pyrophosphorolysis.

36 MATERIALS SCIENCE↗

Colorado State University (CSU) X-Band Precipitation Radar Plan Position Indicator Data Processed with Corrected Moments in Antenna Coordinates (CMAC) Value-Added Product Report

In 2010 the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility procured 3- and 5-cm wavelength radars for documenting the macrophysical, microphysical, and dynamical structure of precipitating systems. To maximize the scientific impact, ARM supported the development of an application chain to correct for various phenomena in order to retrieve the “point” values of moments of the radar spectrum and polarimetric measurements. We have now used the lessons learned from the processing of the 3- and 5-cm wavelength radars obtained by ARM to help process X-band radar data from the Surface Atmospheric Integrated Field Laboratory (SAIL) field campaign. This report details the motivation, science, and progress to date as well as charting a path forward.

54 ENVIRONMENTAL SCIENCES↗

Highly dispersive magnons with spin-gap-like features in the frustrated ferromagnetic S = 1 2 chain compound Ca 2 Y 2 Cu 5 O 10 detected by inelastic neutron scattering

In this paper, we report inelastic neutron scattering experiments in Ca 2 Y 2 Cu 5 O 10 and map out the full one-magnon dispersion which extends up to a record value of 53 meV for frustrated ferromagnetic (FM) edge-sharing CuO 2 chain (FFESC) cuprates. A homogeneous spin-1/2 chain model with a FM nearest-neighbor (NN), an antiferromagnetic (AFM) next-nearest-neighbor (NNN) inchain, and two diagonal AFM interchain couplings (ICs) analyzed within linear spin-wave theory (LSWT) reproduces well the observed strong dispersion along the chains and a weak one perpendicularly. The ratio α=| J a 2 / J a 1 | of the FM NN and the AFM NNN couplings is found as ~0.23, close to the critical point α c =1/4 which separates ferromagnetically and antiferromagnetically correlated spiral magnetic ground states in single chains, whereas α c >0.25 for coupled chains is considerably upshifted even for relatively weak IC. Although the measured dispersion can be described by homogeneous LSWT, the scattering intensity appears to be considerably reduced at ~11.5 and ~28 meV. The gaplike feature at 11.5 meV is attributed to magnon-phonon coupling whereas based on density matrix renormalization group simulations of the dynamical structure factor the gap at 28 meV is considered to stem partly from quantum effects due to the AFM IC. Another contribution to that gap is ascribed to the intrinsic superstructure from the distorting incommensurate pattern of CaY cationic chains adjacent to the CuO 2 ones. It gives rise to nonequivalent CuO 4 units and Cu-O-Cu bond angles Φ and a resulting distribution of all exchange integrals. The J 's fitted by homogeneous LSWT are regarded as average values. The record value of the FM NN integral J 1 =24 meV among FFESC cuprates can be explained by a nonuniversal Φ(≠90°) and Cu-O bond length dependent anisotropic mean direct FM Cu-O exchange $\overline{K}_{pd}$~120 meV, similar to a value of 105 meV for Li 2 CuO 2 , in accord with larger values for La 2 CuO 4 and CuGeO 3 (~110 meV) reported by Braden et al . [Phys. Rev. B 54, 1105 (1996)] phenomenologically. Lastly, enhanced $K_{pd}$ values are also needed to compensate a significant AFM J dd ≥ 6 meV from the dd channel, generic for FFESC cuprates but ignored so far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chain Formation as a Mechanism for Mass-Independent Fractionation of Sulfur Isotopes in the Archean Atmosphere

The anomalous abundances of sulfur isotopes in ancient sediments provide the strongest evidence for an anoxic atmosphere prior to ∼2.45 Ga, but the mechanism for producing this ‘mass-independent’ fractionation pattern remains in question. The prevailing hypothesis has been that it is created by differences in the UV photolysis rates of different SO2 isotopologues. We investigate here a recently proposed additional source of fractionation during gas-phase formation of elemental sulfur (S4 and S8). Because two minor S isotopes rarely occur in the same chain, the longer S4 and S8 chains should be strongly, and roughly equally, depleted in all minor isotopes. This gives rise to negative Δ(exp 33)S values and positive Δ(exp 33)S values in elemental sulfur—just the opposite of (and much larger than) what is predicted from SO2 photolysis itself. Back-reactions during chain formation, specifically photolysis of S2 and S3, pass sulfur having the opposite fractionation back to atomic S, and thence to other sulfur species, causing H2S, SO2, sulfate, and short-chain elemental sulfur to have positive Δ(exp 33)S and negative Δ(exp 33)S. Positive Δ(exp 33)S values in elemental sulfur produced in laboratory SO2 photolysis experiments could be caused by the initial fractionation during photolysis, combined with rapid condensation of short-chain sulfur species on the walls of the reaction chamber, along with a scarcity of back-reactions. The simulated fractionations produced by the chain formation mechanism do not directly match fractionations from the rock record. The mismatch might be explained if the isotopic signals leaving the atmosphere were significantly modulated by life, by uncertainties in the rates of reactions of both major and minor isotopic sulfur species, or by the relatively large potential range of atmospheric parameters. Further work is needed to better constrain these uncertainties, but this novel mechanism suggests new avenues to explore in our search for a explanation for the S-MIF record.

C. E. Harman↗

Environmental indicators of biofuel sustainability: What about context?

Indicators of the environmental sustainability of biofuel production, distribution, and use should be selected, measured, and interpreted with respect to the context in which they are used. These indicators include measures of soil quality, water quality and quantity, greenhouse-gas emissions, biodiversity, air quality, and vegetation productivity. Contextual considerations include the purpose for the sustainability analysis, the particular biofuel production and distribution system (including supply chain, management aspects, and system viability), policy conditions, stakeholder values, location, temporal influences, spatial scale, baselines, and reference scenarios. Recommendations presented in this paper include formulating the problem for particular analyses, selecting appropriate context-specific indicators of environmental sustainability, and developing indicators that can reflect multiple environmental properties at low cost within a defined context. In addition, contextual considerations such as technical objectives, varying values and perspectives of stakeholder groups, and availability and reliability of data need to be understood and considered. Sustainability indicators for biofuels are most useful if adequate historical data are available, information can be collected at appropriate spatial and temporal scales, organizations are committed to use indicator information in the decision-making process, and indicators can effectively guide behavior toward more sustainable practices.

bioenergy↗

Machine learning-based discovery of molecular descriptors that control polymer gas permeation

While machine learning has found increasing use in predicting the properties of polymeric materials with only a knowledge of chain architecture, determining the molecular factors underpinning properties (“interpretable AI”) has remained less well explored. We show that encoding chain chemistry in commonly employed formats, e.g., binary-valued fingerprints, leads to uniqueness issues during the hashing process to save storage space. This is because the hashing algorithm can map several chemical moieties into the same bit. These issues carry over into the ML algorithms, especially for “inverse” design and interpretable AI, and cannot be avoided by changing the length of the fingerprint. Using MACCS key featurizations of monomer repeats resolves some of these issues, and we show that a few substructures consistently appear in top features for maximizing permeability across several gases and ML models. These are carbon–carbon double bonds (as in polyacetylenes) especially when they are associated with methyl groups (found in branching architectures). Here these results, derived from the limited data set of ~ 500 polymers with experimental gas permeation data, are in agreement with physical insight and thus provide a robust foundation which could further enable study of these material classes through detailed experiments and simulations.

36 MATERIALS SCIENCE↗

Enhanced Softwood Cellulose Accessibility by H 3 PO 4 Pretreatment: High Sugar Yield without Compromising Lignin Integrity

Softwood lignocellulose is a potential feedstock for the production of biofuels and bioproducts. However, the highly cross-linked nature of softwood lignocellulose restricts enzyme access to its sugars. Thus, harsh pretreatment conditions (180–280 °C) and/or high enzyme loading are required to unlock sugars. These requirements negatively affect the economic viability of softwoods in biorefineries. Here we show that H 3 PO 4 pretreatment of pine and Douglas fir under a mild reaction temperature (50 °C) and atmospheric pressure enabled a high (~80%) glucan digestibility with low enzyme loading (5 filter paper units (FPU)/g glucan). The dissolution and regeneration of softwoods disrupted the hydrogen bonding between cellulose chains, thereby increasing the cellulose accessibility to cellulase (CAC) values by ~38-fold (from ~0.4 to 15 m 2 /g biomass). Examination of H 3 PO 4 -pretreated softwoods by cross-polarization/magic angle spin (CP/MAS), 13 C- nuclear magnetic resonance (NMR), and Fourier-transform infrared spectroscopy (FTIR) revealed that breaking of the orderly hydrogen bonding of crystalline cellulose caused the increase in CAC (higher than 11 m 2 /g biomass), which, in turn, was responsible for the high glucan digestibility of pretreated softwoods. The H 3 PO 4 pretreatment process was feedstock independent. Finally, 2D 13 C– 1 H heteronuclear single quantum coherence (HSQC) NMR showed that the lignin was depolymerized but not condensed; thus, the lignin can be available for producing high-value products.

09 BIOMASS FUELS↗

Electronic Structure of Fullerene Acceptors in Organic Bulk-Heterojunctions. A Combined EPR and DFT Study

Organic photovoltaic (OPV) devices are a promising alternative energy source. Attempts to improve their performance have focused on the optimization of electron-donating polymers, while electron-accepting fullerenes have received less attention. Here, we report an electronic structure study of the widely used soluble fullerene derivatives PC61BM and PC71BM in their singly reduced state, that are generated in the polymer:fullerene blends upon light-induced charge separation. Density functional theory (DFT) calculations characterize the electronic structures of the fullerene radical anions through spin density distributions and magnetic resonance parameters. The good agreement of the calculated magnetic resonance parameters with those determined experimentally by advanced electron paramagnetic resonance (EPR) allows the validation of the DFT calculations. Thus, for the first time, the complete set of magnetic resonance parameters including directions of the principal g-tensor axes were determined. For both molecules, no spin density is present on the PCBM side chain, and the axis of the largest g-value lies along the PCBM molecular axis. While the spin density distribution is largely uniform for PC61BM, it is not evenly distributed for PC71BM.

14 SOLAR ENERGY↗