Search NASA⌕ Search

SEARCH · Search NASA

Results for “WELL LOGGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Fracture Description of the HFTS-2 Slant Core, Delaware Basin, West Texas

Previous work in the Midland Basin Hydraulic Fracture Test Site project (HFTS1) has shown the value of core recovered from a stimulated volume in providing information on the geometry and extent of hydraulic fractures. This project (HFTS2) is in the Wolfcamp Formation of the Delaware Basin. A slant core through the stimulated volume was acquired above and below a stimulated well and the results of the fracture description are presented here. Here, nine, 3-inch-diameter whole cores from the slant well were examined for fractures prior to slabbing, together with a CT scan of the core. We used criteria developed during the HFTS1 project to identify hydraulic, natural, drilling-induced and core-handling fractures. Material collected from a few fracture faces was cleaned, sieved, and examined under a microscope to look for proppant. A total of 1261 fractures, including 500 hydraulic fractures, were described in 948 feet of core. Hydraulic fractures are not evenly distributed through the cores; they tend to occur in clusters. Many are remarkably planar, smooth, and featureless, while others have twist hackles, steps, plumose, and kinks. Natural, subvertical fractures, mostly less than 1 mm in width, sealed with blocky calcite, are oriented NE-SW (Set 1) and WNW-ESE (Set 2). Two Set 1 fractures have drusy cement on parted faces and were possibly open prior to drilling. A few subvertical sealed fractures with different orientations are also present. Bed-parallel natural fractures, most having fibrous cement (beef), and some showing top-to-north bed-parallel shear are present. Faults with normal/oblique movement were found in one part of the core. Drilling induced and core-handling breaks were identified in all cores, and were also noted to have reactivated some natural fractures. The results from this work will allow hydraulic fracture distribution relative to the stimulated well to be assessed. The number of fractures is generally greater than the number of perforations, but these can be compared for different stages and perforation clusters. Surface features provide information about the direction of hydraulic fracture propagation and about segmentation and bifurcation that might increase the number of fracture strands. Reactivation of natural fractures, including bedding-parallel fractures, occurs although the mechanism of parting is mostly unknown. The wider HFTS2 project will make use of this fracture description to improve hydraulic fracture modeling (geomechanics and engineering), to help explain pressure depletion and fiber optics observations (reservoir depletion and frac geometry), to help verify indirect fracture diagnostic techniques such as microseismic monitoring (geophysics), and to help calibrate horizontal well image logs.

58 GEOSCIENCES↗

FutureGen 2.0 Technical Data

This is a comprehensive collection of all original surface and subsurface technical data, as well as various derivative subsurface models, collected from the FutureGen 2.0 project. This collection of data has been vetted for confidential or sensitive documents.

CCUS↗

Characterization for CO2 Storage from Coal-fired Power Facilities in the Black Warrior Basin of Alabama

The project Characterization for CO2 Storage from Coal-fired Power Facilities in the Black Warrior Basin of Alabama is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas.

.las↗

Gulf of Mexico Miocene CO2 Site Characterization Mega Transect

The project Gulf of Mexico Miocene CO2 Site Characterization Mega Transect is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The University of Texas at Austin study focused on (1) collecting high-resolution, 3-D (HR3D) seismic datasets of the shallow geologic section to evaluate the capacity of potential reservoirs and the sealing capacity of the confining system, and (2) producing a regional CO2 atlas of Miocene age units of the upper Texas coast submerged lands (southeast Texas). The goal of the study was to evaluate the capability of the Miocene age geologic section of Texas submerged lands to permanently store large volumes of anthropogenic CO2. The geographic locations of three HR3D, “P-Cable” seismic surveys collected in the near-shore waters of southeast Texas offers a vertical and horizontal view (data “cube”) example from the second survey. The dataset's high quality allowed for defining recognizable geologic morphologies (shapes) and possible fluid content, which are important for determining an area’s prospects for geologic storage. The regional CO2 atlas of Miocene age units highlights several topics, including: (1) a regional analyses of petroleum systems as analogs for CO2 storage; (2) petrography, petrology, and extent of confining systems of the Miocene section; (3) static capacity estimate; and (4) examples of characterization methodologies of prospect areas. The HR3D datasets and regional analyses within the CO2 atlas of the offshore Texas Miocene provide a sound basis for a future generation of specific CO2 prospects in the study area.

.las↗

Quicklook overview of model changes in Melcor 2.2: Rev 6342 to Rev 9496

MELCOR 2.2 is a significant official release of the MELCOR code with many new models and model improvements. This report provides the code user with a quick review and characterization of new models added, changes to existing models, the effect of code changes during this code development cycle (rev 6342 to rev 9496), a preview of validation results with this code version. More detailed information is found in the code Subversion logs as well as the User Guide and Reference Manuals.

97 MATHEMATICS AND COMPUTING↗

Well-Controlled Hydro-thermo-chemical Stimulation of a Coso Geothermal Well to Enhance Productivity

The goal of this project was to demonstrate controlled fracturing and permeability increase to enhance resource production and power generation at Coso. It was planned to stimulate at least two intervals in the Well 73-18RD with zonal isolation using advanced high-temperature packer technology. The anticipation was that a hydraulic fracture would form in one zone and in the second zone natural fractures would reopen, shear and extend, thereby increasing fluid communication in the field. In both cases, the intent was to carefully design the stimulation to take advantage of the relative roles of hydraulic pressure, thermal stress and chemical (“hydro-thermo-chemical”) dissolution. The project had planned to use the Welltec Annular Barrier (WAB) system developed as part of another DOE-funded project which was on schedule to be ready for field deployment. If successful, the Coso Operating Company would incorporate this approach into their ongoing well maintenance in other wells increasing the total MWs produced. The project had multiple tasks and the objective of Task 1 was to develop a workover plan, to build a geologic model, to design a stimulation program, and to work with the operating and services companies to develop a detailed budget and obtain the necessary permits and sundry notices. In Phase 2 the workover plan would be implemented, the designed stimulation would be carried out, and subsequently the well would logged and tested to measure the impact of stimulation. Per sponsor request, a Pre-Task 1 activity with a Go/No Go decision point was scheduled in Task 1.

02 PETROLEUM↗

CALIBRATION OF LAMOST STELLAR SURFACE GRAVITIES USING THE KEPLER ASTEROSEISMIC DATA

Asteroseismology is a powerful tool to precisely determine the evolutionary status and fundamental properties of stars. With the unprecedented precision and nearly continuous photometric data acquired by the NASA Kepler mission, parameters of more than 10{sup 4} stars have been determined nearly consistently. However, most studies still use photometric effective temperatures (T {sub eff}) and metallicities ([Fe/H]) as inputs, which are not sufficiently accurate as suggested by previous studies. We adopted the spectroscopic T {sub eff} and [Fe/H] values based on the Large sky Area Multi-Object fiber Spectroscopic Telescope (LAMOST) low-resolution spectra (R ≃ 1800), and combined them with the global oscillation parameters to derive the physical parameters of a large sample of stars. Clear trends were found between Δlogg(LAMOST-seismic) and spectroscopic T {sub eff} as well as log g, which may result in an overestimation of up to 0.5 dex for the log g values of giants in the LAMOST catalog. We established empirical calibration relations for the log g values of dwarfs and giants. These results can be used for determining the precise distances to these stars based on their spectroscopic parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

New materials for fireplace logs

Fibrous insulation and refractory concrete are used for logs as well as fireproof walls, incinerator bricks, planters, and roof shingles. Insulation is lighter and more shock resistant than fireclay. Lightweight slag bonded with refractory concrete serves as aggregrate.

Kieselback, D. J.↗

1 SEISMIC AMPLITUDES AND ATTENUATIONS OF GAS HYDRATEBEARING SEDIMENTS IN FRACTURED AND SAND RESERVOIRS

Seismic amplitude is principally affected by velocities above and below an interface. However, the amplitude presents attenuation on the hydrate bearing sediments. Thus, seismic interpretation relied on amplitude in elastic wave behavior can not completely reveal seismic characteristics of the hydrate bearing sediments, especially if multiple hydrate layers are present. In the paper, we discuss the physical mechanisms of intrinsic and scattering attenuations. Some previous lab measurements and viscoelastic modeling studies show attenuation behaviors on low frequency and synthetic seismic. Two offset wells provide log data of resistivity, porosity, density, and sonic velocities for identifying hydrate layers and, therefore, allow us to investigate the behaviors of attenuations. The intrinsic and scattering attenuations are significantly in strong dissolved or free gas filling fractures/faults. Hydrate filling fractures/faults are expected to have the effects of intrinsic and scattering attenuations, however it is difficult to distinguish them from no-hydrate filling fractures/faults. In no-fracture/fault zone above the BSR, significant amplitude reduction comparing to background indicates possible fracture-filling hydrate or pore-filling hydrate.

attenuation↗

Utah FORGE: Well 16A(78)-32 and 16B(78)-32 Stimulation Production Logging Tests

These are production logging tests (PLT) results from Halliburton collected during the nine hour circulation test performed at Utah FORGE on April 27th, 2024. The circulation test involved injecting into well 16A(78)-32 and producing out of well 16B(78)-32) and was carried out after the fracturing of both of those wells. Data attached here includes raw and processed PLT logs from both wells, as well as technical reports summarizing the data collection and results.

15 GEOTHERMAL ENERGY↗

Sampling in Long-Screened Wells: Issues, Misconceptions, and Solutions

The issues associated with long-screened wells (LSWs) (and open boreholes) at contaminated sites are well documented in the groundwater literature but are still not fully appreciated in practice. As established in seminal and review papers going back over three decades, the interpretation of sampling results from LSWs is challenging in the presence of vertical hydraulic gradients and borehole flow; furthermore, LSWs allow for vertical redistribution of contamination between aquifer layers. Acknowledgment of these issues has led to the development of new technologies and well designs to enable discrete-zone monitoring (DZM), yet LSWs remain common for many reasons, for example, as multipurpose wells, for geophysical logging, and (or) as legacy installations. Despite the literature on LSWs and despite the adoption of DZM at many sites, the use of LSWs persists and the challenges of interpreting sampling results from LSWs remain. In this issue paper, we provide a conceptual overview of the problems posed by LSWs and review existing literature and past work to improve the interpretation of sampling in LSWs. We draw on experience from previous studies at the Hanford Site in eastern WA, USA, and use synthetic examples to illustrate key concepts and challenges for interpretation. A recently published analytical modeling framework is used to develop illustrative synthetic examples and demonstrate a workflow for building scientific intuition to understand issues around interpreting samples from LSWs, which is critical to effective characterization and groundwater remediation at sites with LSWs.

54 ENVIRONMENTAL SCIENCES↗

lllinois Storage Corridor CarbonSAFE Phase III: Pre-drilling Site Assessment: Prairie State Generating Company

The Illinois Storage Corridor project will drill a stratigraphic test well as part of the Illinois Storage Corridor CarbonSAFE Phase 3 project near the Prairie State Generating Company coal-fired power plant near Marissa, Illinois. The pre-drilling site evaluation has considered the primary target reservoirs, the Potosi Dolomite and St. Peter Sandstone, and primary seal, the Maquoketa Group. Data to be collected from the well include core, fluid samples, in situ well tests, geophysical logs intended to provide information on lithologic, geomechanical, and geophysical characteristics to determine the feasibility for the geologic sequestration of 50 million metric tons or more of injected carbon dioxide. The planned drilling site has been evaluated using available subsurface geologic data and analyses from the Illinois Basin. These data provide lithologic and structural information, shallow groundwater resource distribution, location of known nearby wellbores, and regional drilling characteristics. The data were used to generate geologic structure and isopach maps for the target reservoir and caprock strata and for prognosing the tops of major lithologic units to aid drilling and coring procedures. The regional analyses indicate that no known structural features are expected to negatively impact the target storage reservoir or caprock. No protected and sensitive areas, groundwater resources, or existing resource development are expected to be impacted by the proposed well drilling activities. The well is planned to be drilled to a total depth of approximately 5,600 feet (1,707 m) and terminate in the Precambrian. Cores (up to 5 intervals) will be collected from the Maquoketa Group, confining units above the St. Peter Sandstone, St. Peter Sandstone, confining units of the Potosi Dolomite and the Potosi Dolomite. Water samples will be attempted to be collected from the St. Peter Sandstone and Potosi Dolomite. Potential impact on drilling progress is a lost circulation zone in the Potosi Dolomite, which has been demonstrated to have intermittent cavernous porosity from karstification elsewhere in the Illinois Basin. This document also presents a preliminary coring and sampling program, proposed logging suite, and well testing program, all of which will be reviewed during drilling.

01 COAL, LIGNITE, AND PEAT↗

Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data

This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corrected for elevation and location using the Utah FORGE earth model. These data locations correspond to well locations provided in GDR Submission 1111 (linked below). All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.

15 GEOTHERMAL ENERGY↗

Cretaceous sequence stratigraphy of the northern Baltimore Canyon Trough: Implications for basin evolution and carbon storage

We evaluate the Cretaceous stratigraphy and carbon sequestration potential of the northern Baltimore Canyon Trough (NBCT) using >10,000 km of multi-channel seismic profiles integrated with geophysical logs, biostratigraphy, and lithology from 29 offshore wells. We identify and map six sequences resolved primarily at the stage level. Accommodation was dominated by thermal and non-thermal subsidence, though sequence boundaries correlate with regional and global sea-level changes, and the record is modified by igneous intrusion, active faulting, and changes in sediment supply and sources. Our stratigraphic maps illustrate a primary southern (central Appalachian) Early Cretaceous source that migrated northward during the Aptian and Albian. During the Cenomanian, sedimentation rates in the NBCT increased and depocenters shifted northward and landward. We show that deposition occurred in three phases: (1) earlier Cretaceous paleoenvironments were primarily terrestrial indicated by variable amplitude, chaotic seismic facies, serrated gamma logs, and heterolithic sandstones and mudstones with terrestrial microfossils; (2) the Albian to Cenomanian was dominated by deltaic paleoenvironments indicated by blocky, funnel-shaped, gamma-ray logs and clinoforms characterized by continuous high-amplitude seismic reflections with well-defined terminations; and (3) the Cenomanian and younger was marine shelf, inferred from mudstoneprone lithologies, peak gamma-ray values in well logs, and foraminiferal evidence. Long-term transgression and maximum water depths at the Cenomanian/Turonian boundary correlative with Ocean Anoxic Event 2 were followed by a regression and relative sea-level fall. We show that porous and permeable sandstones of three Aptian to Cenomanian highstand systems tracts are high-volume reservoirs for supercritical CO 2 storage that are confined by overlying deep water mudstones.

58 GEOSCIENCES↗