Results for “Waste Processing” — Page 20

NASA NTRS1974

Monitoring the dispersion of ocean waste disposal plumes from ERTS-1 and Skylab

The author has identified the following significant results. About forty miles off the Delaware coast is located the disposal site for waste discharged from a plant processing titanium dioxide. The discharge is a greenish-brown; 15-20% acid liquid which consists primarily of iron chlorides and sulfates. The barge which transports this waste has a 1,000,000 gallon capacity and makes approximately three trips to the disposal site per week. ERTS-1 MSS digital tapes are being used to study the dispersion patterns and drift velocities of the iron-acid plume. Careful examination of ERTS-1 imagery disclosed a fishhook-shaped plume about 40 miles east of Cape Henlopen caused by a barge disposing acid wastes. The plume shows up more strongly in the green band than in the red band. Since some acids have a strong green component during dumping and turn slowly more brownish-reddish with age, the ratio of radiance signatures between the green and red bands may give an indication of how long before the satellite overpass the acid was dumped. Enlarged enhancements of the acid waste plumes, prepared from the ERTS-1 MSS digital tapes aided considerably in studies of the dispersion of the waste plume. Currently acid dumps are being coordinated with ERTS-1 overpasses.

Klemas, V.↗

NASA NTRS1991

Ancient fluvial processes in the equatorial highlands of Mars

Martian highland craters typically lack ejecta deposits, have no noticeable rim, and are flat floored. In addition, crater size frequency distribution curves show that highland craters have depleted populations less than 20 km in diameter. A variety of processes have been suggested to explain these observations including deposition of aeolian or volcanic materials up to the crater rim crests, thermal creep, terrain softening, and mass wasting. However, none of these processes adequately explains both the crater morphology and population distribution. In order to explain both the Martian highland crater morphology and population distribution, a fluvial process is proposed which is capable of removing the loose crater rim material. The resulting effect is to decrease the crater diameter, thereby causing the population curves to bendover. The eroded material is redistributed, burying or partially burying smaller diameter craters before complete erosion. This material may also be deposited into local topographic lows, creating the depositional basins observed. A fluvial process explains both sets of observations: crater morphology and crater population distribution curves.

Craddock, Robert A.↗

NASA NTRS2013

Trash to Gas: Converting Space Trash into Useful Products

NASA's Logistical Reduction and Repurposing (LRR) project is a collaborative effort in which NASA is determined to reduce total logistical mass through reduction, reuse and recycling of various wastes and components of long duration space missions and habitats. LRR is focusing on four distinct advanced areas of study: Advanced Clothing System, Logistics-to-Living, Heat Melt Compactor and Trash to Supply Gas (TtSG). The objective of TtSG is to develop technologies that convert material waste, human waste and food waste into high-value products. High-value products include life support oxygen and water, rocket fuels, raw material production feedstocks, and other energy sources. There are multiple pathways for converting waste to products involving single or multi-step processes. This paper discusses thermal oxidation methods of converting waste to methane. Different wastes, including food, food packaging, Maximum Absorbent Garments (MAGs), human waste simulants, and cotton washcloths have been evaluated in a thermal degradation reactor under conditions promoting pyrolysis, gasification or incineration. The goal was to evaluate the degradation processes at varying temperatures and ramp cycles and to maximize production of desirable products and minimize high molecular weight hydrocarbon (tar) production. Catalytic cracking was also evaluated to minimize tar production. The quantities of C02, CO, CH4, and H20 were measured under the different thermal degradation conditions. The conversion efficiencies of these products were used to determine the best methods for producing desired products.

Trash-to-Gas↗

NASA NTRS1995

Bicarbonate of soda paint stripping process validation and material characterization

The Aircraft Production Division at San Antonio Air Logistics Center has conducted extensive investigation into the replacement of hazardous chemicals in aircraft component cleaning, degreasing, and depainting. One of the most viable solutions is process substitution utilizing abrasive techniques. SA-ALC has incorporated the use of Bicarbonate of Soda Blasting as one such substitution. Previous utilization of methylene chloride based chemical strippers and carbon removal agents has been replaced by a walk-in blast booth in which we remove carbon from engine nozzles and various gas turbine engine parts, depaint cowlings, and perform various other functions on a variety of parts. Prior to implementation of this new process, validation of the process was performed, and materials and waste stream characterization studies were conducted. These characterization studies examined the effects of the blasting process on the integrity of the thin-skinned aluminum substrates, the effects of the process on both air emissions and effluent disposal, and the effects on the personnel exposed to the process.

Haas, Michael N.↗

NASA NTRS2013

Trash-to-Gas: Converting Space Trash into Useful Products

NASA's Logistical Reduction and Repurposing (LRR) project is a collaborative effort in which NASA is determined to reduce total logistical mass through reduction, reuse and recycling of various wastes and components of long duration space missions and habitats. LRR is focusing on four distinct advanced areas of study: Advanced Clothing System, Logistics-to-Living, Heat Melt Compactor and Trash to Supply Gas (TtSG). The objective of TtSG is to develop technologies that convert material waste, human waste and food waste into high-value products. High-value products include life support oxygen and water, rocket fuels, raw material production feedstocks, and other energy sources. There are multiple pathways for converting waste to products involving single or multi-step processes. This paper discusses thermal oxidation methods of converting waste to methane. Different wastes, including food, food packaging, Maximum Absorbent Garments (MAGs), human waste simulants, and cotton washcloths have been evaluated in a thermal degradation reactor under conditions promoting pyrolysis, gasification or incineration. The goal was to evaluate the degradation processes at varying temperatures and ramp cycles and to maximize production of desirable products and minimize high molecular weight hydrocarbon (tar) production. Catalytic cracking was also evaluated to minimize tar production. The quantities of CO2, CO, CH4, and H2O were measured under the different thermal degradation conditions. The conversion efficiencies of these products were used to determine the best methods for producing desired products.

Caraccio, Anne J.↗

NASA NTRS2005

Characteristics of Impact Craters and Interior Deposits: Analysis of the Spatial and Temporal Distribution of Volatiles in the Highlands of Mars

The martian southern highlands contain impact craters that display pristine to degraded morphologies, and preserve a record of degradation that can be attributed to fluvial, eolian, mass wasting, volcanic and impact-related processes. However, the relative degree of modification by these processes and the amounts of material contributed to crater interiors are not well constrained. Impact craters (D>10 km) within Terra Cimmeria (0deg-60degS, 190deg-240degW), Terra Tyrrhena (0deg-30degS, 260deg-310degW) and Noachis Terra (20deg-50degS, 310deg-340degW) are being examined to better understand the degradational history and evolution of highland terrains. The following scientific objectives will be accomplished. 1) Determine the geologic processes that modified impact craters (and surrounding highland terrains). 2) Determine the sources (e.g. fluvial, lacustrine, eolian, mass wasting, volcanic, impact melt) and relative amounts of material composing crater interior deposits. 3) Document the relationships between impact crater degradation and highland fluvial systems. 4) Determine the spatial and temporal relationships between degradational processes on local and regional scales. And 5) develop models of impact crater (and highland) degradation that can be applied to these and other areas of the martian highlands. The results of this study will be used to constrain the geologic, hydrologic and climatic evolution of Mars and identify environments in which subsurface water might be present or evidence for biologic activity might be preserved.

Mest, S. C.↗

NASA NTRS2015

In-Space Propulsion, Logistics Reduction, and Evaluation of Steam Reformer Kinetics: Problems and Prospects

Human space missions generate waste materials. A 70-kg crewmember creates a waste stream of 1 kg per day, and a four-person crew on a deep space habitat for a 400+ day mission would create over 1600 kg of waste. Converted into methane, the carbon could be used as a fuel for propulsion or power. The NASA Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) project is investing in space resource utilization with an emphasis on repurposing logistics materials for useful purposes and has selected steam reforming among many different competitive processes as the preferred method for repurposing organic waste into methane. Already demonstrated at the relevant processing rate of 5.4 kg of waste per day, high temperature oxygenated steam consumes waste and produces carbon dioxide, carbon monoxide, and hydrogen which can then be converted into methane catalytically. However, the steam reforming process has not been studied in microgravity. Data are critically needed to understand the mechanisms that allow use of steam reforming in a reduced gravity environment. This paper reviews the relevant literature, identifies gravity-dependent mechanisms within the steam gasification process, and describes an innovative experiment to acquire the crucial kinetic information in a small-scale reactor specifically designed to operate within the requirements of a reduced gravity aircraft flight. The experiment will determine if the steam reformer process is mass-transport limited, and if so, what level of forced convection will be needed to obtain performance comparable to that in 1-g.

Logistics↗

NASA NTRS2013

Counterflow Regolith Heat Exchanger

A problem exists in reducing the total heating power required to extract oxygen from lunar regolith. All such processes require heating a great deal of soil, and the heat energy is wasted if it cannot be recycled from processed material back into new material. The counterflow regolith heat exchanger (CoRHE) is a device that transfers heat from hot regolith to cold regolith. The CoRHE is essentially a tube-in-tube heat exchanger with internal and external augers attached to the inner rotating tube to move the regolith. Hot regolith in the outer tube is moved in one direction by a right-hand - ed auger, and the cool regolith in the inner tube is moved in the opposite direction by a left-handed auger attached to the inside of the rotating tube. In this counterflow arrangement, a large fraction of the heat from the expended regolith is transferred to the new regolith. The spent regolith leaves the heat exchanger close to the temperature of the cold new regolith, and the new regolith is pre-heated close to the initial temperature of the spent regolith. Using the CoRHE can reduce the heating requirement of a lunar ISRU system by 80%, reducing the total power consumption by a factor of two. The unique feature of this system is that it allows for counterflow heat exchange to occur between solids, instead of liquids or gases, as is commonly done. In addition, in variants of this concept, the hydrogen reduction can be made to occur within the counterflow heat exchanger itself, enabling a simplified lunar ISRU (in situ resource utilization) system with excellent energy economy and continuous nonbatch mode operation.

Zubrin, Robert↗

NASA NTRSDate not supplied

PFAS Treatment Pilot Study using Granular Activated Carbon at Kennedy Space Center, Florida

Per- and polyfluoroalkyl substances (PFAS) have been found in investigative derived waste (IDW) generated from groundwater sampling and remediation activities conducted at Kennedy Space Center (KSC), Florida. PFAS are exceptionally strong compounds because of carbon-fluorine bonds resulting in resistance to degradation, low chemical reactivity, compound stability, and persistence in the environment. The regulatory status of PFAS is very dynamic. PFAS is not considered a hazardous waste and has no federal or state (Florida) cleanup requirements at this time. Due to the current and unknown future of the regulatory and treatment landscape, non-hazardous IDW, based upon site volatile organic compounds (VOCs) regulated under Title 40 of Federal Regulations part 261, containing PFAS is not being processed for off-site waste disposal under KSC’s Resource Conservation and Recovery Act permit as a proactive precaution. Long-term storage of aqueous IDW in the meantime was determined to be inadequate due to the potential for spills and/or leaks. A very limited number treatment methods are available at this time. To date, granular activated carbon (GAC) and ion exchange technologies have been found to be some of the most consistent treatment options for removing PFAS from aqueous media. Therefore, a pilot study using GAC was developed at KSC to determine the feasibility of treating non-hazardous IDW containing PFAS to reduce the total volume of PFAS waste and minimize the risk of leaks or spills while storing the waste until complete PFAS-destructive treatment options are more readily available. NASA wanted the pilot test to be able to demonstrate the ability to completely remove 18 PFAS compounds and the site VOCs to below the state of Florida groundwater cleanup target levels (GCTLs).

Michael J Deliz↗

NASA NTRSDate not supplied

Advancements in Logistics Reduction Technologies for Exploration Missions

Management of logistics on exploration missions includes both looking for ways to minimize the quantities, mass and volume of various consumables, supplies, spares and equipment as well as ways to minimize the crew time needed for locating and handling those items. Also included are ways to minimize the waste, handling and resultant products from the processes of maintaining a crew on these missions. The Logistics Reduction project encompasses technologies for management of waste, trash, autonomous logistics, and clothing. This paper provides a status of work in these areas including recent accomplishments and challenges encountered. Future objectives will also be covered along with the work currently in progress. Specifically, the paper will cover technologies in waste management, namely, the Universal Waste Management System (UWMS) or exploration toilet and work on an alternative waste collection container, the Alternate Fecal Canister. Trash management technologies work on the Trash Compaction and Processing System (TCPS) and Trash to Gas (TtG) is summarized with progress to date as well as information on how Jettison as an option is related. Progress and summary of recent accomplishment on the RFID (Radio Frequency ID) Enabled Autonomous Logistics Management (REALM) and the Autonomous Logistics (AL) technologies is detailed. Advanced Clothing System (ACS) and work in the area of Systems Engineering and Integration (SE&I) is also included. Status of the technologies, accomplishments and how the focus areas inform program decisions will be addressed.

human spaceflight↗

NASA NTRSDate not supplied

Advancements in Logistics Reduction for Exploration Missions

Management of logistics on exploration missions includes both looking for ways to minimize the quantities, mass and volume of various consumables, supplies, spares and equipment as well as ways to minimize the crew time needed for locating and handling those items. Also included are ways to minimize the waste, handling and resultant products from the processes of maintaining a crew on these missions. The Logistics Reduction project encompasses technologies for management of waste, trash, autonomous logistics, and clothing. This paper provides a status of work in these areas including recent accomplishments and challenges encountered. Future objectives will also be covered along with the work currently in progress. Specifically, the paper will cover technologies in waste management, namely, the Universal Waste Management System (UWMS) or exploration toilet and work on an alternative waste collection container, the Alternate Fecal Canister. Trash management technologies work on the Trash Compaction and Processing System (TCPS) and Trash to Gas (TtG) is summarized with progress to date as well as information on how Jettison as an option is related. Progress and summary of recent accomplishment on the RFID (Radio Frequency ID) Enabled Autonomous Logistics Management (REALM) and the Autonomous Logistics (AL) technologies is detailed. Advanced Clothing System (ACS) and work in the area of Systems Engineering and Integration (SE&I) is also included. Status of the technologies, accomplishments and how the focus areas inform program decisions will be addressed.

human spaceflight↗

NASA NTRSDate not supplied

Logistics Reduction Advancements and Future Plans for NASA's Exploration Missions

Management of logistics on exploration missions includes both looking for ways to minimize the quantities, mass and volume of various consumables, supplies, spares, and equipment as well as ways to minimize the crew time needed for locating and handling those items. Also included are ways to minimize the waste, handling, and resultant products from the processes of maintaining a crew on these missions. The Logistics Reduction project encompasses technologies for management of waste, trash, autonomous logistics, and clothing. This paper provides a status of work from 2023 in these areas including recent accomplishments and challenges encountered. Future objectives and plans for 2024 will also be covered along with the work currently in progress. Specifically, the paper will cover technologies in waste management, namely, the Universal Waste Management System (UWMS) or exploration toilet and work on an alternative waste collection container, the Alternate Fecal Canister. Trash management technologies work on the Trash Compaction Processing System (TCPS) and Trash to Gas (TtG) is summarized with progress to date as well as information on how Jettison as an option is related. Progress and summary of recent accomplishment on the RFID (Radio Frequency ID) Enabled Autonomous Logistics Management (REALM) and the Autonomous Logistics (AL) technologies is detailed. Advanced Clothing System (ACS) and work in the area of Systems Engineering and Integration (SE&I) is also included. Status of the technologies, accomplishments and how the focus areas inform program decisions will be addressed.

Toilet↗

NASA NTRSDate not supplied

Logistics Reduction Advancements and Future Plans for NASA's Exploration Missions

Management of logistics on exploration missions includes both looking for ways to minimize the quantities, mass and volume of various consumables, supplies, spares, and equipment as well as ways to minimize the crew time needed for locating and handling those items. Also included are ways to minimize the waste, handling, and resultant products from the processes of maintaining a crew on these missions. The Logistics Reduction project encompasses technologies for management of waste, trash, autonomous logistics, and clothing. This paper provides a status of work from 2023 in these areas including recent accomplishments and challenges encountered. Future objectives and plans for 2024 will also be covered along with the work currently in progress. Specifically, the paper will cover technologies in waste management, namely, the Universal Waste Management System (UWMS) or exploration toilet and work on an alternative waste collection container, the Alternate Fecal Canister. Trash management technologies work on the Trash Compaction Processing System (TCPS) and Trash to Gas (TtG) is summarized with progress to date as well as information on how Jettison as an option is related. Progress and summary of recent accomplishment on the RFID (Radio Frequency ID) Enabled Autonomous Logistics Management (REALM) and the Autonomous Logistics (AL) technologies is detailed. Advanced Clothing System (ACS) and work in the area of Systems Engineering and Integration (SE&I) is also included. Status of the technologies, accomplishments and how the focus areas inform program decisions will be addressed.

Toilet↗

NASA NTRS2024

Logistics Reduction Advancements and Future Plans for NASA's Exploration Missions

Management of logistics on exploration missions includes both looking for ways to minimize the quantities, mass and volume of various consumables, supplies, spares, and equipment as well as ways to minimize the crew time needed for locating and handling those items. Also included are ways to minimize the waste, handling, and resultant products from the processes of maintaining a crew on these missions. The Logistics Reduction project encompasses technologies for management of waste, trash, autonomous logistics, and clothing. This paper provides a status of work from 2023 in these areas including recent accomplishments and challenges encountered. Future objectives and plans for 2024 will also be covered along with the work currently in progress. Specifically, the paper will cover technologies in waste management, namely, the Universal Waste Management System (UWMS) or exploration toilet and work on an alternative waste collection container, the Alternate Fecal Canister. Trash management technologies work on the Trash Compaction Processing System (TCPS) and Trash to Gas (TtG) is summarized with progress to date as well as information on how Jettison as an option is related. Progress and summary of recent accomplishment on the RFID (Radio Frequency ID) Enabled Autonomous Logistics Management (REALM) and the Autonomous Logistics (AL) technologies is detailed. Advanced Clothing System (ACS) and work in the area of Systems Engineering and Integration (SE&I) is also included. Status of the technologies, accomplishments and how the focus areas inform program decisions will be addressed.

Toilet↗

NASA NTRS1980

U.S. program assessing nuclear waste disposal in space - A status report

Various concepts for the space disposal of nuclear waste are discussed, with attention given to the destinations now being considered (high earth orbit, lunar orbit, lunar surface, solar orbit, solar system escape, sun). Waste mixes are considered in the context of the 'Purex' (Plutonium and Uranium extraction) process and the potential forms for nuclear waste disposal (ORNL cermet, Boro-silicate glass, Metal matrix, Hot-pressed supercalcine) are described. Preliminary estimates of the energy required and the cost surcharge needed to support the space disposal of nuclear waste are presented (8 metric tons/year, requiring three Shuttle launches). When Purex is employed, the generated electrical energy needed to support the Shuttle launches is shown to be less than 1%, and the projected surcharge to electrical users is shown to be slightly more than two mills/kW-hour.

Rice, E. E.↗

NASA NTRS1993

Converting environmental wastes into valuable resources

This concept employs a viable energy saving method that uses a solvent to separate oil from particle matter; it can be used in metal forming industries to deoil sludges, oxides, and particle matter that is presently committed to landfill. If oily particles are used in their oily state, severe consequences to environmental control systems such as explosions or filter blinding, occur in the air handling equipment. This is due to the presence of hydrocarbons in the stack gasses resulting from the oily particles. After deoiling, the particles can be recycled and the separated oil can be used as a fuel. The process does not produce a waste of it's own and does not harm air or water. It demonstrates the dual benefits of it being commercially viable and in the national interest of conserving resources.

Duval, Leonard A.↗

NASA NTRS1995

The Application of Microwave Incineration to Regenerative Life Support

Future human exploration missions will require life support systems that are highly regenerative, requiring minimum resupply, enabling the crews to be largely self-sufficient. Solid wastes generated in space will be processed to recover usable material. Researchers at NASA Ames Research Center are studying a commercially-produced microwave incinerator as a solid waste processor. This paper will describe the results of testing to-date.

Sun, Sidney C.↗

NASA NTRS1964

Conference on Nutrition in Space and Related Waste Problems

As part of a continuing process man constantly seeks new habitats. In the late 1950's, he ventured into a vast and challenging new habitat, extraterrestrial space. Extending the realm of human life has always been a challenge to man, and inherent to all successful extensions of man into new domains is his ability to provide the essentials for life itself, his nutrition and controlled use of metabolic products. The provision of these essential requirements has always been a challenge and a motivating force in maintaining and extending human life on Earth. This challenge has now been extended beyond the Earth. As illustrated in this volume, many men and women of vision who continually devote their energies to feeding man on Earth have accepted the additional challenge of nutrition in space. They have already made inroads into the new problem of nutrition and waste handling in space and have already collected much physiological, psychological, toxicological, and pathological data related to space nutrition, feeding and elimination. They have elucidated man-machine interactions and the effects of these interactions on alimentation and elimination requirements in space. Thus light has been shed on specific research and development programs needed to establish requirements for nutrition and handling of metabolic wastes during manned space missions of 20 days' to 3 years' duration. These initial accomplishments have entailed the considerable efforts of many people and the knowledge and experience in nutrition and feeding gained by the Space Science Board of the National Academy of Sciences. This volume clearly represents the ability of scientists, engineers, and administrators to attack a problem as it arises; it clearly demonstrates the capability of the scientific and engineering communities to combine efforts, mobilize quickly, and devote their talents to a national need

Space environment↗