Search NASA⌕ Search

SEARCH · Search NASA

Results for “Window”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Helium window for shock-tube monochromators

Technique for coupling vacuum ultraviolet monochromator to shock tube to avoid loss of high energy ultraviolet light during quantitative measurements is described. System consists of helium gas window pumping through small aperture in entrance pupil of monochromator. Diagram of equipment and principles of operation are presented.

Thomas, G. M.↗

Launch window analysis in a new perspective with examples of departures from Earth to Mars

Earth-departure windows are investigated for two round trip stopover missions to Mars. These are the 1981 inbound Venus swingby mission and the 1986 direct minimum-energy mission. The secular effects of planetary oblateness are used to predict the motion of the parking orbit. A procedure is developed for matching the motion of the parking orbit and the escape asymptote. Earth-departure velocity penalties, caused by orbital plane misalinement, are reduced by synchronizing the motion of the parking orbit and the escape trajectory.

Thibodeau, J. R., III↗

Thermal performance and radio-frequency transmissivity of candidate ablation materials for S-band antenna window application on manned spacecraft

A test program was conducted in the MSC 1.5 MW arc-heated facility to evaluate the thermal performance of ablation materials having potential application as radio frequency windows. These tests were conducted for the improvement of omnidirectional antenna operating characteristics during atmospheric reentry. Since a full scale model of the Apollo command service module was available for antenna tests, this mockup was used as a basic for the tests. Test models were subjected to heating conditions simulating the nominal lunar return trajectory (AS-501) and the design trajectories, high heat load and high heating rate. RF measurements were made before and after the arc jet tests to measure attenuation effects due to the thermal degradation of the materials under consideration. The test program demonstrated that additional development is required in materials technology to achieve an ablative system with both good RF transmission characteristics and thermal-structural integrity.

Tillian, D. J.↗

Apollo window meteoroid experiment

Apollo window meteoroid experiment for obtaining data from crater counts and analysis of meteoroid residue combined with fused glass in described. A preliminary estimate of the flux resulting from seven Apollo spacecraft is found to be in agreement with the Surveyor 3 data, but is lower than the model environment.

Cour-Palais, B. G.↗

Estimation of sea surface temperature from remote measurements in the 11-13 micron window region

The Nimbus-4 IRIS data was examined in the spectral region 775 to 1250/cm (8-13 microns) for useful information to determine the sea surface temperature. The high spectral resolution data of IRIS was degraded to low resolution by averaging to simulate a multi-channel radiometer in the window region. These simulated data show that within the region 775-975/cm (12.9-10.25 microns) the brightness temperatures are linearly related to the absorption parameters. Such a linear relationship is observed over cloudy as well as clear regions and over a wide range of latitudes. From this linear relationship it is feasible to correct for the atmospheric attenuation and get the sea surface temperature, accurate to within 1 K, in a cloud free field of view. The information about the cloud cover is taken from the TV pictures and BUV albedo measurements on board the Nimbus-4 satellite.

Prabhakara, C.↗

The use of the transmission windows of the Fabry-Perot interferometer in the detection of Raman scattered radiation from atmospheric gases.

Demonstration that the use of the Fabry-Perot interferometer as a filter with transmission windows occurring at regular intervals in wave numbers provides a highly sensitive method for detection of atmospheric gases using their rotational Raman spectra excited by a suitable laser. Some of the operating advantages include signal gains of several orders of magnitude, a simple direct interpretation of the results in terms of the density and types of the gaseous constituents, size and weight reductions from conventional apparatus, ease of operation, and relative freedom from interference from other molecules in the scattering volume. This method is compared with the techniques that have been discussed in the literature by other workers in the field.

Smith, W. H.↗

Laser with a transmitting window.

The effect of transmission of radiation through one mirror of a laser is investigated. For a laser oscillator the result is to change the effective resonance frequency and Q of the cavity. Using the same model for the cavity, a signal is injected into the active medium through the transmitting window, and its effect on the system studied. When the external signal is strong enough and sufficiently close to the natural frequency of the laser oscillator, the laser locks its frequency to the input signal. The equations describing the system are solved over the range of input frequencies where the laser is locked, and the resulting gain found. In the high-intensity limit the medium saturates, and the gain tends to that of a lossy cavity. As the input intensity vanishes, the gain approaches infinity and the system tends to a laser oscillator.

Spencer, M. B.↗

Mechanically prestressed windows

A method was developed for mechanically prestressing glass used in spacecraft windows so that surface imperfections of the glass will not propagate under stress. A metal ring, in tension, is placed around the periphery of the glass where the interference fit between the ring and glass fixes the glass in a state of uniform compression. When the glass is subjected to a pressure loading, the compressive prestress prevents tension loading of the outer surface and, therefore, eliminates the tendency for propagation of surface imperfections.

Keathley, W. H.↗

Complex permittivity measurements during high temperature recycling of space shuttle antenna window and dielectric heat shield materials

The research performed and the data obtained on candidate space shuttle antenna window and heat shield materials are presented. The measurement technique employs a free-space focused beam microwave bridge for obtaining RF transmission data, and a device which rotates a sample holder which is heated on one side by natural gas-air flames. The surface temperature of each sample is monitored by IR pyrometry; embedded and rear surface thermocouples are also used in obtaining temperature data. The surface of the sample undergoing test is subjected to approximately the same temperature/time profile that occurs at a proposed antenna position on the space shuttle as it re-enters. The samples are cycled through ten of these temperature profiles to determine the recycling effects. Very little change was noted in the materials due to the recycling.

Bassett, H. L.↗

Atmospheric windows for HF laser radiation between 2.7 and 3.2 microns.

A high resolution computer model study of the atmospheric transmittance in the 2.7 to 3.2 micron region of the spectrum is described, whose purpose was to identify atmospheric windows for the HF laser wavelengths available in this region. Three HF lines corresponding to the transitions P(12), 1 to 0, P(6), 3 to 2, and P(4), 5 to 4 are identified as having transmittances of 0.70 or greater over a 1-km sea level path.

Seals, R. K., Jr.↗

The acoustic response of rooms with open windows to airborne sounds.

The objective of the work described in this and the companion paper was to establish a theory for predicting the sound field generated in a room by a sonic boom incident on an open window. In this paper, some basic theoretical results are presented. First, the case of a normally incident harmonic wave was considered. Expressions for the pressure field were obtained by viewing the room as a terminated duct and by using a Green function method. The concept of mode excitation distribution functions was formulated and used to match the boundary conditions. This concept has been extended for oblique incidence. A modified form of Laplace transform technique was used to obtain expressions in the time domain for transient signals.

Vaidya, P. G.↗

The transmission of sonic boom signals into rooms through open windows.

This paper is the second of two companion papers. In the first paper, expressions for the acoustic field generated inside a room with an open window due to incoming transient or periodic signals have been presented. In this paper, the technique has been applied to the specific example of an N-wave type signal. Detailed mathematical analysis is followed by its approximate version and numerical computation. Results of controlled experiments, using simulated sonic booms, have been compared with theoretical predictions.

Vaidya, P. G.↗

Launch window definition for sky target experiments.

This paper is a brief report on the computer program developed for the Extraterrestrial Physics Barium Ion Cloud (BIC) Project. The mathematical analysis developed for the program along with its programing characteristics are pointed out to show that this program is adaptable to similar sky target projects. Definite viewing constraints are specified so that the chosen ground tracking stations can photograph the behavior of the sky target after its release. Viewing factors include the illumination of the target by the sun, the relative elevation look angle to the target from each tracking station, the solar and lunar depression angles at each tracking station, and the total sky background brightness of the target relative to each tracking station. Numeric values are assigned to each factor through program input. The program output is flexible so that the results of the window calculations can be studied to the depth required.

Michaud, N. H.↗