Search NASA⌕ Search

SEARCH · Search NASA

Results for “analytical process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

An internally consistent gamma ray burst time history phenomenology

A phenomenology for gamma ray burst time histories is outlined. Order of their generally chaotic appearance is attempted, based on the speculation that any one burst event can be represented above 150 keV as a superposition of similarly shaped increases of varying intensity. The increases can generally overlap, however, confusing the picture, but a given event must at least exhibit its own limiting characteristic rise and decay times if the measurements are made with instruments having adequate temporal resolution. Most catalogued observations may be of doubtful or marginal utility to test this hypothesis, but some time histories from Helios-2, Pioneer Venus Orbiter and other instruments having one-to several-millisecond capabilities appear to provide consistency. Also, recent studies of temporally resolved Solar Maximum Mission burst energy spectra are entirely compatible with this picture. The phenomenology suggested here, if correct, may assist as an analytic tool for modelling of burst processes and possibly in the definition of burst source populations.

Cline, T. L.↗
NASA NTRS1983

Development of heat flux sensors for turbine airfoils and combustor liners

The design of durable turbine airfoils that use a minimum amount of cooling air requires knowledge of the heat loads on the airfoils during engine operation. Measurement of these heat loads will permit the verification or modification of the analytical models used in the design process and will improve the ability to predict and confirm the thermal performance of turbine airfoil designs. Heat flux sensors for turbine blades and vanes must be compatible with the cast nickel-base and cobalt-base materials used in their fabrication and will need to operate in a hostile environment with regard to temperature, pressure and thermal cycling. There is also a need to miniaturize the sensors to obtain measurements without perturbing the heat flows that are to be measured.

Atkinson, W. H.↗
NASA NTRS1987

Optimal cure cycle design of a resin-fiber composite laminate

A unified computed aided design method was studied for the cure cycle design that incorporates an optimal design technique with the analytical model of a composite cure process. The preliminary results of using this proposed method for optimal cure cycle design are reported and discussed. The cure process of interest is the compression molding of a polyester which is described by a diffusion reaction system. The finite element method is employed to convert the initial boundary value problem into a set of first order differential equations which are solved simultaneously by the DE program. The equations for thermal design sensitivities are derived by using the direct differentiation method and are solved by the DE program. A recursive quadratic programming algorithm with an active set strategy called a linearization method is used to optimally design the cure cycle, subjected to the given design performance requirements. The difficulty of casting the cure cycle design process into a proper mathematical form is recognized. Various optimal design problems are formulated to address theses aspects. The optimal solutions of these formulations are compared and discussed.

Hou, Jean W.↗
NASA NTRS1987

First-order Fermi acceleration in the two-stream limit

A study of the first-order Fermi mechanism for accelerating cosmic-rays at relativistic and nonrelativistic shocks is carried out by using the two-stream approximation. Exact steady-state analytic solutions illustrating the shock acceleration process in the test-particle limit in which monoenergetic (relativistic) seed particles enter the shock through an upstream free-escape boundary are obtained. The momentum spectrum of the shock accelerated particles consists of a series of Dirac delta distributions corresponding to particles that have undergone an integral number of acceleration cycles. Since particles in the model have a finite fixed escape probability from the shock and the particle momenta p are equally spaced in log p, the envelope of the delta functions series is a power law in momentum. The solutions are used to discuss time-dependent aspects of the shock acceleration process in terms of the finite cycle time, escape probability, and momentum change per cycle that can be deduced from the steady-state model. The length-scale over which the accelerated particles extend upstream of the shock is shown to depend upon the particle energy, with the higher energy particles extending further upstream. This effect is shown to be intimately related to the kinematic threshold requirement that the particle speed exceed the fluid speed in order for particles to swim upstream of the shock and participate in the shock acceleration process.

Bogdan, T. J.↗
NASA NTRS1991

Optimization techniques applied to passive measures for in-orbit spacecraft survivability

Spacecraft designers have always been concerned about the effects of meteoroid impacts on mission safety. The engineering solution to this problem has generally been to erect a bumper or shield placed outboard from the spacecraft wall to disrupt/deflect the incoming projectiles. Spacecraft designers have a number of tools at their disposal to aid in the design process. These include hypervelocity impact testing, analytic impact predictors, and hydrodynamic codes. Analytic impact predictors generally provide the best quick-look estimate of design tradeoffs. The most complete way to determine the characteristics of an analytic impact predictor is through optimization of the protective structures design problem formulated with the predictor of interest. Space Station Freedom protective structures design insight is provided through the coupling of design/material requirements, hypervelocity impact phenomenology, meteoroid and space debris environment sensitivities, optimization techniques and operations research strategies, and mission scenarios. Major results are presented.

Mog, Robert A.↗
NASA NTRS1991

Plume and wake dynamics, mixing, and chemistry behind an HSCT aircraft

The chemical evolution and mixing and vortical motion of a High Speed Civil Transport's engine exhausts must be analyzed in order to track the gas and its speciation as emissions are mixed to atmospheric scales. Attention is presently given to an analytic model of the wake dynamical processes which accounts for the roll-up of the trailing vorticity, its breakup due to the Crow instability, and the subsequent evolution and motion of the reconnected vorticity. The concentrated vorticity is noted to wrap up the buoyant exhaust and suppress its continued mixing and dilution. The species tracked encompass those which could be heterogeneously reactive on the surfaces of the condensed ice particles, and those capable of reacting with exhaust soot particle surfaces to form active contrail and/or cloud condensation nuclei.

Miake-Lye, R. C.↗
NASA NTRS1991

Performance evaluation of redundant disk array support for transaction recovery

Redundant disk arrays provide a way of achieving rapid recovery from media failures with a relatively low storage cost for large scale data systems requiring high availability. Here, we propose a method for using redundant disk arrays to support rapid recovery from system crashes and transaction aborts in addition to their role in providing media failure recovery. A twin page scheme is used to store the parity information in the array so that the time for transaction commit processing is not degraded. Using an analytical model, we show that the proposed method achieves a significant increase in the throughput of database systems using redundant disk arrays by reducing the number of recovery operations needed to maintain the consistency of the database.

Mourad, Antoine N.↗
NASA NTRS1992

Database recovery using redundant disk arrays

Redundant disk arrays provide a way for achieving rapid recovery from media failures with a relatively low storage cost for large scale database systems requiring high availability. In this paper a method is proposed for using redundant disk arrays to support rapid-recovery from system crashes and transaction aborts in addition to their role in providing media failure recovery. A twin page scheme is used to store the parity information in the array so that the time for transaction commit processing is not degraded. Using an analytical model, it is shown that the proposed method achieves a significant increase in the throughput of database systems using redundant disk arrays by reducing the number of recovery operations needed to maintain the consistency of the database.

Mourad, Antoine N.↗
NASA NTRS1993

Recovery issues in databases using redundant disk arrays

Redundant disk arrays provide a way for achieving rapid recovery from media failures with a relatively low storage cost for large scale database systems requiring high availability. In this paper we propose a method for using redundant disk arrays to support rapid recovery from system crashes and transaction aborts in addition to their role in providing media failure recovery. A twin page scheme is used to store the parity information in the array so that the time for transaction commit processing is not degraded. Using an analytical model, we show that the proposed method achieves a significant increase in the throughput of database systems using redundant disk arrays by reducing the number of recovery operations needed to maintain the consistency of the database.

Mourad, Antoine N.↗
NASA NTRS1993

Patterns of deformation and volcanic flows associated with lithospheric loading by large volcanoes on Venus

Magellan radar imaging and topography data are now available for a number of volcanoes on Venus greater than 100 km in radius. These data can be examined to reveal evidence of the flexural response of the lithosphere to the volcanic load. On Venus, erosion and sediment deposition are negligible, so tectonic evidence of deformation around large volcanoes should be evident except where buried by very young flows. Radar images reveal that most tectonic features and flow units on the flanks of these volcanoes have predominantly radial orientations. However, both Tepev Mons in Bell Regio and Sapas Mons in Atla Regio exhibit circumferential graben on their flanks. In addition, images reveal several flow units with an annular character around the north and west flanks of Tepev Mons. This pattern most likely results from ponding of flows in an annular flexural moat. Maat Mons in Atla Regio and Sif Mons in Eistla Regio are examples of volcanoes that lack circumferential graben and annular flows; discernible flow units and fractures on these constructs appear to be predominantly radial. Altimetry data can also provide evidence of flexural response. Tepev Mons is partially encircled by depressions that may be sections of a flexural moat that has not been completely filled. The locations of these depressions generally coincide with the annular flows described above. There is weaker evidence for such depressions around Maat Mons as well. The lack of circumferential tectonic features around most volcanoes on Venus might be explained by gradual moat filling and coverage by radial flows. The depressions around Tepev (and possible Maat) may indicate that this process is currently continuing. We use analytic models of plate flexure in an axisymmetric geometry to constrain the elastic plate thickness supporting Tepev Mons. If we consider the outer radius of the ponded flows to be the edge of a moat, we find that models with elastic plate thickness of 10-20 km fit best. Finite element models of a volcanic load detached from the underlying lithosphere predict overthrusting and radial normal faulting at the volcano's edge. Such a mechanism for the formation of radial rift zones on Venus volcanoes would make such features analogous to structures on the flanks of volcanoes on Earth.

Mcgovern, Patrick J.↗
NASA NTRS1994

Issues in the development of a 10 MBPS K=15 Viterbi decoder

The NMSU Telemetry Center, in collaboration with the NASA Microelectronics Center (MRC) at UNM, has completed a study of the feasibility of building a constraint length 15, rate 1/2 Viterbi Decoder (or BVD) to operate at a rate of 10 Mbps. The BVD, if built, would make TDRSS more accessible to all users, small satellites in particular, by providing an additional 2 dB of link margin, relative to the use of the standard constraint length 7 decoder. The study included the following: review of the 1 Mbps BVD built by the Jet Propulsion Laboratory (JPL), currently the only BVD in existence; development of Specifications for the basic processing unit of the BVD (MRC); analytical Determination of performance of large constraint length convolutional codes; investigation of the impact of processor design on the overall system design; and two feasible packaging technologies, proposed by Cincinnati Electronics of Ohio. It was concluded that while the construction of the BVD is feasible, it will require the most advanced packaging technology currently available, and that the project would be best accomplished in an industrial facility. While the size, complexity, and power requirements of the BVD will be extreme, these will impact only the ground station. The spacecraft will incur a minor change in the encoder design, and the increased coding gain will allow a satellite to operate with a smaller antenna.

Osborne, William P.↗
NASA NTRS1995

Remote Sensing and Holocene Vegetation: History of Global Change

Predictions of the future evolution of the earth's atmospheric chemistry and its impact on global circulation patterns are based on Global Climate Models (GCM's) that integrate the complex interactions of the biosphere, atmosphere and the oceans. Most of the available records of climate and environment are shortterm records (from decades to a few hundred years) with convolved information of real trends and short-term fluctuations. GCM's must be tested beyond the short-term record of climate and environment to insure that predictions are based on trends and therefore are appropriate to support long term policy making. An appropriate timeframe should extend over the Holocene period (the last 10,000 years) when most contemporary climate and environmental processes began. Since its inception in 1916, pollen analysis has successfully reconstructed the paleoecology of the last 10,000 years for many sites around the world, thus providing a powerful time-link between short- and long-term processes in the biosphere. However, pollen analytic results cannot be used in physiological models driven by remotely sensed data. Further, modern ecology and climate data are necessary to calibrate pollen analytical models. These are available for extensive regions in the northern hemisphere, particularly for eastern United States and Canada, and western Europe. In other parts of the world, weather stations are scattered, records extend over a period of only few years, and there are no systematic climate records for large portions of the globe. This is the case of Patagonia in Argentina where a few weather stations are located close to the Atlantic seaports, fewer stations are in towns located near the eastern Andean foothill, and fewer still are scattered on the extensive Patagonian plateau. This problem became evident after completion of the Argentine-German Program of Palynology (PROPAL), a cooperative effort of National University of Mar del Plata (Argentina) and University Bamberg (Germany) to produce a modern pollen database for the Pampa and Patagonia regions.

DAntoni, Hector↗
NASA NTRS1998

Role of the Quasi-Biennial Oscillation in the Transport of Aerosols from the Tropical Stratospheric Reservoir to Midlatitudes

The temporal evolution of the stratospheric aerosol distribution in the tropical stratospheric reservoir after the eruption of Mount Pinatubo was observed from 1992 to 1995 by the HALOE instrument on the UARS satellite. Since the spatial gradient of aerosol loading is large at the boundaries of the tropical stratospheric reservoir due to the volcanic aerosols, the effect of the meridional circulation on the distribution is seen clearly. The mechanism for dispersal of aerosol in the lower stratosphere from the tropics into midlatitudes strongly depends on the phase of the equatorial zonal wind. The time-latitude cross sections of the normalized distribution of aerosol on isentropic surfaces are used to observe the equatorial variation as well as change in meridional dispersal during the quasi-biennial period. Observed tropical stratospheric winds are used with a simple analytical dynamical model to examine transport processes of tracers from the tropics during several phases of the quasi-biennial oscillation (QBO) from 1992 to 1995. The Lagrangian meridional circulation in the tropics is consistent with the vertical and meridional velocities correlated with the QBO in the zonal wind. We find that vertical motion plays a crucial role in vertical and subsequent meridional transport. The pattern of meridional divergence derived from the vertical velocity is closely related to the observed HALOE aerosol distributions and their temporal development in the equatorial region. The westerly (easterly) shear phase of the QBO is associated with sinking (rising) motions at the equator and subsequent poleward (equatorward) transport in the lower stratosphere.

Choi, Wookap↗
NASA NTRS2002

Scaling Laws Applied to a Modal Formulation of the Aeroservoelastic Equations

A method of scaling is described that easily converts the aeroelastic equations of motion of a full-sized aircraft into ones of a wind-tunnel model. To implement the method, a set of rules is provided for the conversion process involving matrix operations with scale factors. In addition, a technique for analytically incorporating a spring mounting system into the aeroelastic equations is also presented. As an example problem, a finite element model of a full-sized aircraft is introduced from the High Speed Research (HSR) program to exercise the scaling method. With a set of scale factor values, a brief outline is given of a procedure to generate the first-order aeroservoelastic analytical model representing the wind-tunnel model. To verify the scaling process as applied to the example problem, the root-locus patterns from the full-sized vehicle and the wind-tunnel model are compared to see if the root magnitudes scale with the frequency scale factor value. Selected time-history results are given from a numerical simulation of an active-controlled wind-tunnel model to demonstrate the utility of the scaling process.

Pototzky, Anthony S.↗
NASA NTRS2005

Modeling for Ultrasonic Health Monitoring of Foams with Embedded Sensors

In this report analytical and numerical methods are proposed to estimate the effective elastic properties of regular and random open-cell foams. The methods are based on the principle of minimum energy and on structural beam models. The analytical solutions are obtained using symbolic processing software. The microstructure of the random foam is simulated using Voronoi tessellation together with a rate-dependent random close-packing algorithm. The statistics of the geometrical properties of random foams corresponding to different packing fractions have been studied. The effects of the packing fraction on elastic properties of the foams have been investigated by decomposing the compliance into bending and axial compliance components. It is shown that the bending compliance increases and the axial compliance decreases when the packing fraction increases. Keywords: Foam; Elastic properties; Finite element; Randomness

Wang, L.↗
NASA NTRS2012

Solar Ion Processing of Major Element Surface Compositions of Mature Mare Soils: Insights from Combined XPS and Analytical TEM Observations

Solar wind ions are capable of altering the sur-face chemistry of the lunar regolith by a number of mechanisms including preferential sputtering, radiation-enhanced diffusion and sputter erosion of space weathered surfaces containing pre-existing compositional profiles. We have previously reported in-situ ion irradiation experiments supported by X-ray photoelectron spectroscopy (XPS) and analytical TEM that show how solar ions potentially drive Fe and Ti reduction at the monolayer scale as well as the 10-100 nm depth scale in lunar soils [1]. Here we report experimental data on the effect of ion irradiation on the major element surface composition in a mature mare soil.

Christoffersen, R.↗
NASA NTRS2016

Exploration Laboratory Analysis

The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability for manned exploration missions. Since a single, compact space-ready laboratory analysis capability to perform all exploration clinical measurements is not commercially available, the ELA project objective is to demonstrate the feasibility of emerging operational and analytical capability as a biomedical diagnostics precursor to long duration manned exploration missions. The initial step towards ground and flight demonstrations in fiscal year (FY) 2015 was the downselection of platform technologies for demonstrations in the space environment. The technologies selected included two Small Business Innovation Research (SBIR) performers: DNA Medicine Institute's rHEALTH X and Intelligent Optical System's lateral flow assays combined with Holomic's smartphone analyzer. The selection of these technologies were based on their compact size, breadth of analytical capability and favorable ability to process fluids in a space environment, among several factors. These two technologies will be advanced to meet ground and flight demonstration success criteria and requirements. The technology demonstrations and metrics for success will be finalized in FY16. Also, the downselected performers will continue the technology development phase towards meeting prototype deliverables in either late 2016 or 2017.

In-Flight laboratory↗
NASA NTRS2016

Exploration Laboratory Analysis

The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability for manned exploration missions. Since a single, compact space-ready laboratory analysis capability to perform all exploration clinical measurements is not commercially available, the ELA project objective is to demonstrate the feasibility of emerging operational and analytical capability as a biomedical diagnostics precursor to long duration manned exploration missions. The initial step towards ground and flight demonstrations in fiscal year (FY) 2015 was the down selection of platform technologies for demonstrations in the space environment. The technologies selected included two Small Business Innovation Research (SBIR) performers: DNA Medicine Institutes rHEALTH X and Intelligent Optical Systems later flow assays combined with Holomics smartphone analyzer. The selection of these technologies were based on their compact size, breadth of analytical capability and favorable ability to process fluids in a space environment, among several factors. These two technologies will be advanced to meet ground and flight demonstration success criteria and requirements that will be finalized in FY16. Also, the down selected performers will continue the technology development phase towards meeting prototype deliverables in either late 2016 or 2017.

Laboratory analysis↗