Search NASA⌕ Search

SEARCH · Search NASA

Results for “articulating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

More Durable Tracks for Heavy Vehicles

Tie bars instead of threaded fasteners make track throwing less likely. Proposed undercarriage for tank or bulldozer has flanged edges to prevent rocks and other road debris from getting caught in track drive and damaging or casting off track. Improved track has no threaded fasteners to be loosened by road shock and vibration. Continuous chain of floating guide bars articulated at web junctions. Pins replace bolted connections. Guide bars and flanges on vehicle keep out stones.

Collins, Earl R., Jr.↗
NASA NTRS1987

Sealed Joints for Hard Suits or Robots

Shoulder-to-arm joint allows wearer to move with considerable freedom while sealing wearer from outside environment. Inner wall is set of bellows, compressed at inner arm and expanded at outer arm, but degree of compression or expansion changes continuously as arm moves. Joint also used on diving suits and on manipulation sleeves for autoclaves and high-vacuum boxes, and as protective cover for articulated torque drives in hostile environments.

Vykukal, Hubert C.↗
NASA NTRS1987

Spacecraft attitude control momentum requirements analysis

The relationship between attitude and angular momentum control requirements is derived for a fixed attitude, Earth orbiting spacecraft with large area articulating appendages. Environmental effects such as gravity gradient, solar radiation pressure, and aerodynamic forces arising from a dynamic, rotating atmosphere are examined. It is shown that, in general, each environmental effect contributes to both cyclic and secular momentum requirements both within and perpendicular to the orbit plane. The gyroscopic contribution to the angular momentum control requirements resulting from a rotating, Earth oriented spacecraft is also discussed. Special conditions are described where one or more components of the angular momentum can be made to vanish, or become purely cyclical. Computer generated plots for a candidate space station configuration are presented to supplement the analytically derived results.

Robertson, Brent P.↗
NASA NTRS1987

Description of the US Army small-scale 2-meter rotor test system

A small-scale powered rotor model was designed for use as a research tool in the exploratory testing of rotors and helicopter models. The model, which consists of a 29 hp rotor drive system, a four-blade fully articulated rotor, and a fuselage, was designed to be simple to operate and maintain in wind tunnels of moderate size and complexity. Two six-component strain-gauge balances are used to provide independent measurement of the rotor and fuselage aerodynamic loads. Commercially available standardized hardware and equipment were used to the maximum extent possible, and specialized parts were designed so that they could be fabricated by normal methods without using highly specialized tooling. The model was used in a hover test of three rotors having different planforms and in a forward flight investigation of a 21-percent-scale model of a U.S. Army scout helicopter equipped with a mast-mounted sight.

Phelps, Arthur E., III↗
NASA NTRS1987

Human factors in space station architecture 2. EVA access facility: A comparative analysis of 4 concepts for on-orbit space suit servicing

Four concepts for on-orbit spacesuit donning, doffing, servicing, check-out, egress and ingress are presented. These are: the Space Transportation System (STS) Type (shuttle system enlarged), the Transit Airlock (Shuttle Airlock with suit servicing removed from the pump-down chamber), the Suitport (a rear-entry suit mates to a port in the airlock wall), and the Crewlock (a small, individual, conformal airlock). Each of these four concepts is compared through a series of seven steps representing a typical Extra Vehicular Activity (EVA) mission: (1) Predonning suit preparation; (2) Portable Life Support System (PLSS) preparation; (3) Suit Donning and Final Check; (4) Egress/Ingress; (5) Mid-EVA rest period; (6) Post-EVA Securing; (7) Non-Routine Maintenance. The different characteristics of each concept are articulated through this step-by-step approach. Recommendations concerning an approach for further evaluations of airlock geometry, anthropometrics, ergonomics, and functional efficiency are made. The key recommendation is that before any particular airlock can be designed, the full range of spacesuit servicing functions must be considered, including timelines that are most supportive of EVA human productivity.

Cohen, Marc M.↗
NASA NTRS1987

Preliminary design, analysis, and costing of a dynamic scale model of the NASA space station

The difficulty of testing the next generation of large flexible space structures on the ground places an emphasis on other means for validating predicted on-orbit dynamic behavior. Scale model technology represents one way of verifying analytical predictions with ground test data. This study investigates the preliminary design, scaling and cost trades for a Space Station dynamic scale model. The scaling of nonlinear joint behavior is studied from theoretical and practical points of view. Suspension system interaction trades are conducted for the ISS Dual Keel Configuration and Build-Up Stages suspended in the proposed NASA/LaRC Large Spacecraft Laboratory. Key issues addressed are scaling laws, replication vs. simulation of components, manufacturing, suspension interactions, joint behavior, damping, articulation capability, and cost. These issues are the subject of parametric trades versus the scale model factor. The results of these detailed analyses are used to recommend scale factors for four different scale model options, each with varying degrees of replication. Potential problems in constructing and testing the scale model are identified, and recommendations for further study are outlined.

Gronet, M. J.↗
NASA NTRS1987

Effect of STS space suit on astronaut dominant upper limb EVA work performance

The STS Space Suited and unsuited dominant upper limb performance was evaluated in order to quantify future EVA astronaut skeletal muscle upper limb performance expectations. Testing was performed with subjects standing in EVA STS foot restraints. Data was collected with a CYBEX Dynamometer enclosed in a waterproof container. Control data was taken in one g. During one g testing, weight of the Space Suit was relieved from the subject via an overhead crane with a special connection to the PLSS of the suit. Experimental data was acquired during simulated zero g, accomplished by neutral buoyancy in the Weightless Environment Training Facility. Unsuited subjects became neutrally buoyant via SCUBA BC vests. Actual zero g experimental data was collected during parabolic arc flights on board NASA's modified KC-135 aircraft. During all test conditions, subjects performed five EVA work tasks requiring dominant upper limb performance and ten individual joint articulation movements. Dynamometer velocities for each tested movement were 0 deg/sec, 30 or 60 deg/sec and 120 or 180 deg/sec, depending on the test, with three repetitions per test. Performance was measured in foot pounds of torque.

Greenisen, Michael C.↗
NASA NTRS1987

Experimental Study of Shock Wave Interference Heating on a Cylindrical Leading Edge

An experimental study of shock wave interference heating on a cylindrical leading edge representative of the cowl of a rectangular hypersonic engine inlet at Mach numbers of 6.3, 6.5, and 8.0 is presented. Stream Reynolds numbers ranged from 0.5 x 106 to 4.9 x 106 per ft. and stream total temperature ranged from 2100 to 3400 R. The model consisted of a 3" dia. cylinder and a shock generation wedge articulated to angles of 10, 12.5, and 15 deg. A fundamental understanding was obtained of the fluid mechanics of shock wave interference induced flow impingement on a cylindrical leading edge and the attendant surface pressure and heat flux distributions. The first detailed heat transfer rate and pressure distributions for two dimensional shock wave interference on a cylinder was provided along with insight into the effects of specific heat variation with temperature on the phenomena. Results show that the flow around a body in hypersonic flow is altered significantly by the shock wave interference pattern that is created by an oblique shock wave from an external source intersecting the bow shock wave produced in front of the body.

Wieting, Allan R.↗
NASA NTRS1986

Recent developments in the dynamics of advanced rotor systems. II

The problems that have been encountered in the dynamics of advanced rotor systems are described. The methods for analyzing these problems are discussed, as are past solutions of the problems. To begin, the basic dynamic problems of rotors are discussed: aeroelastic stability, rotor and airframe loads, and aircraft vibration. Next, advanced topics that are the subject of current research are described: vibration control, dynamic inflow, finite element analyses, and composite materials. Finally, the dynamics of various rotorcraft configurations are considered: hingeless rotors, bearingless rotors, rotors with circulation control, coupled rotor/engine dynamics, articulated rotors, and tilting proprotor aircraft.

Johnson, W.↗
NASA NTRS1987

Main rotor broadband noise study in the DNW

An acoustics test of a 2/5 scale model BO-105 helicopter main rotor was conducted in the Duits-Nederlandse Windtunnel (DNW). A range of operating conditions was tested from hover to moderately high flight speeds for various climb and descent rates at different thrust settings. Diagnostic tests including rotor speed and blade geometry changes were made to better isolate and study particular broadband self noise sources. Acoustic data in the form of acoustic pressure time histories and power spectra are used to demonstrate the regions of importance of the different broadband noise sources and their sensitivity to operating conditions. To help interpret the data, comparisons are made to predictions of rotor broadband noise. The predictions are based on self noise data previously obtained from isolated airfoil sections and the use of the NASA ROTONET program to define rotor performance and to sum contributions of noise from individual blade segments. An important result herein is the identification and articulation of a previously unheralded rotor broadband noise source. This source is blade-turbulent wake interaction (BWI) noise which dominates the spectra in the mid-frequencies for off-peak blade-vortex interaction (BVI) noise flight conditions.

Brooks, Thomas F.↗
NASA NTRS1986

Concepts for the evolution of the Space Station Program

An evaluation is made of innovative but pragmatic waste management, interior and exterior orbital module construction, Space Shuttle docking, orbital repair operation, and EVA techniques applicable to the NASA Space Station program over the course of its evolution. Accounts are given of the Space Shuttle's middeck extender module, an on-orbit module assembly technique employing 'Pringles' stack-transportable conformal panels, a flexible Shuttle/Space Station docking tunnel, an 'expandable dome' for transfer of objects into the Space Station, and a Space Station dual-hatch system. For EVA operations, pressurized bubbles with articulating manipulator arms and EVA hard suits incorporating maneuvering, life support and propulsion capabilities, as well as an EVA gas propulsion system, are proposed. A Space Station ultrasound cleaning system is also discussed.

Michaud, Roger B.↗
NASA NTRS1987

Stability studies of Solar Optical Telescope dynamics

The Solar Optical Telescope (SOT) is designed to operate as an attached payload mounted on the Instrument Pointing System (IPS) in the cargo bay of the Shuttle Orbiter. Pointing and control of SOT is accomplished by an active Articulated Primary Mirror (APM), an active Tertiary Mirror (TM), an elaborate set of optical sensors, electromechanical actuators and programmable controllers. The structural interactions of this complex control system are significant factors in the stability of the SOT. The preliminary stability study results of the SOT dynamical system are presented. Structural transfer functions obtained from the NASTRAN model of the structure were used. These studies apply to a single degree of freedom (elevation). Fully integrated model studies will be conducted in the future.

Gullapalli, Sarma N.↗
NASA NTRS1987

Soft mounted momentum compensated pointing system for the Space Shuttle Orbiter

This paper describes a potential pointing and tracking system for the Space Shuttle with possible future application to Space Station. In order to accomplish high precision pointing and tracking (at rates up to 2 deg/s) in the expected disturbance environment, a high bandwidth gimbaled pointing system is required. A soft-mounted, momentum-compensated gimbal system is suggested for this role. A momentum-compensated system is inertially reacting, decoupling the control system dynamics from the basebody structural dynamics. This allows a soft isolation stage to be added between the basebody and the articulation stage, which attenuates high frequency disturbances. In this paper, three configurations are examined: a hard-mounted system, a passive soft-mounted system, and an active soft-mounted system. Analysis demonstrates that the soft-mounted systems have superior disturbance-rejection properties. The active soft mount allows reduction of the isolation stiffness to zero, and so obtains the highest level of performance.

Sirlin, Samuel W.↗
NASA NTRS1985

Finite state modelling of unsteady aerodynamics and its application to a rotor dynamic problem

The paper presents a method for formulating finite state unsteady aerodynamic models in the time domain from frequency domain unsteady aerodynamics. The method is based on recognizing that the lift deficiency function represents an aerodynamic transfer function and utilizes the Bode plot technique, used in control systems engineering, to construct approximation to the lift deficiency function. Indicial response functions for both fixed wing and rotary wing applications are obtained, using these finite state unsteady aerodynamic models. It is shown that the rotary wing indicial response function is oscillatory and thus it is fundamentally different when compared to the fixed wing indicial response function which is nonoscillatory. Certain aspects of the finite state aerodynamic model are demonstrated by applying it to the flapping dynamics of an articulated helicopter rotor blade. The influence of unsteady aerodynamics on the damping characteristics of the rotor is examined. The same problem is also treated by using a different unsteady aerodynamic model, namely dynamic inflow. Based on a comparison of the results obtained with these two unsteady aerodynamic models, useful conclusions are drawn regarding some fundamental features of these theories.

Friedmann, P. P.↗
NASA NTRS1988

Programmable Grit-Blasting System

In programmable grit-blasting system undergoing design, controller moves blasting head to precise positions to shape or remove welding defects from parts. Controller holds head in position for preset dwell time and moves head to new position along predetermined path. Position of articulated head established by pair of servomotors according to programmed signals from controller. Head similar to video borescope. Used to remove welding defects in blind holes. Suited for repetitive production operations in grit-blast box.

Burley, Richard K.↗
NASA NTRS1988

Personnel occupied woven envelope robot

The Personnel Occupied Woven Envelope Robot (POWER) provides an alternative to extravehicular activity (EVA) of space suited astronauts and/or use of long slender manipulator arms such as are used in the Shuttle Remote Manipulator System. POWER provides the capability for a shirt sleeved astronaut to perform such work by entering a control pod through air locks at both ends of an inflated flexible bellows (access tunnel). The exoskeleton of the tunnel is a series of six degrees of freedom (Six-DOF) articulated links compressible to 1/6 of their fully extended length. The operator can maneuver the control pod to almost any location within about 50 m of the base attachment to the space station. POWER can be envisioned as a series of hollow Six-DOF manipulator segments or arms wherein each arm grasps the shoulder of the next arm. Inside the hollow arms ia a bellow-type access tunnel. The control pod is the fist of the series of linked hollow arms. The fingers of the fist are conventional manipulator arms under direct visual control of the nearby operator in the pod. The applications and progress to date of the POWER system is given.

Wessling, Francis↗
NASA NTRS1987

Space Station accommodation of attached payloads

The Attached Payload Accommodation Equipment (APAE), which provides the structure to attach payloads to the Space Station truss assembly, to access Space Station resources, and to orient payloads relative to specified targets, is described. The main subelements of the APAE include a station interface adapter, payload interface adapter, subsystem support module, contamination monitoring system, payload pointing system, and attitude determination system. These components can be combined to provide accommodations for small single payloads, small multiple payloads, large self-supported payloads, carrier-mounted payloads, and articulated payloads. The discussion also covers the power, thermal, and data/communications subsystems and operations.

Browning, Ronald K.↗
NASA NTRS1987

Computational studies in low speed rotor aerodynamics

Recently, curved vortex elements have been developed for use in helicopter free wake calculations. As previously documented, these elements allow more efficient and accurate calculation of the wake-on-wake interactions than do traditional straight vortex elements. Curved elements have been applied here to the prediction of the rotor wake geometry and its associated inflow distribution in low speed forward flight. By coupling the wake model to a blade dynamic analysis, a simulation capable of predicting blade motion and hub moments in forward flight has been developed. The resulting code has been validated by successful predictions of the lateral flapping of articulated rotors in low speed level flight, and additional simulators of climb and descent have been undertaken. Successful correlation of other experimental data, including moments due to cyclic on hingeless rotors and transient thrust response in hover, has given encouraging evidence of the capabilities of this code as a tool for analysis of the low speed regime.

Quackenbush, Todd R.↗