Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Growth of ultrathin twin-free b-oriented YBa{sub 2}Cu{sub 3}O{sub 7} {sub –} {sub x} films

Twin-free b-oriented YBa{sub 2}Cu{sub 3}O{sub 7–x} films with a thickness less than 40 nm have been epitaxially grown on (100)SrLaGaO{sub 4} crystals. Based on the temperature dependence of resistance, the onset temperature of the transition to the superconducting state is found to be 90 K; the transition width is 4 K. The film growth has been performed in two stages. A (100)PrBa{sub 2}Cu{sub 3}O{sub 7–x} buffer layer was previously grown on a (100)SrLaGaO{sub 4} substrate by rf magnetron sputtering in an Ar–O{sub 2} gas mixture at a continuous and monotonic increase in temperature from 660 to 830°C. The main YBa{sub 2}Cu{sub 3}O{sub 7–x} film was grown on the buffer layer surface by pulsed laser deposition in an oxygen medium at a fixed temperature (800°C). The above processes were implemented in different chambers, which were connected by a vacuum channel for transporting samples. Both films were grown in situ, without contacting atmosphere in all growth stages. An X-ray diffraction study has shown that the YBa{sub 2}Cu{sub 3}O{sub 7–x} films are single-crystal and free of precipitates of other phases and domains of other orientations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced electrical and magnetic properties in La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films deposited on CaTiO{sub 3}-buffered silicon substrates

We investigate the suitability of an epitaxial CaTiO{sub 3} buffer layer deposited onto (100) Si by reactive molecular-beam epitaxy (MBE) for the epitaxial integration of the colossal magnetoresistive material La{sub 0.7}Sr{sub 0.3}MnO{sub 3} with silicon. The magnetic and electrical properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} films deposited by MBE on CaTiO{sub 3}-buffered silicon (CaTiO{sub 3}/Si) are compared with those deposited on SrTiO{sub 3}-buffered silicon (SrTiO{sub 3}/Si). In addition to possessing a higher Curie temperature and a higher metal-to-insulator transition temperature, the electrical resistivity and 1/f noise level at 300 K are reduced by a factor of two in the heterostructure with the CaTiO{sub 3} buffer layer. These results are relevant to device applications of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films on silicon substrates.

36 MATERIALS SCIENCE↗

Low loss superconducting titanium nitride coplanar waveguide resonators

Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into rf coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin temperatures in both the many photon and single photon limits, i.e., high and low electric field regimes, respectively. At high field, we found the highest internal quality factors ({approx}10{sup 7}) were measured for TiN with predominantly a (200)-TiN orientation. The (200)-TiN is favored for growth at high temperature on either bare Si or SiN buffer layers. However, growth on bare sapphire or Si(100) at low temperature resulted in primarily a (111)-TiN orientation. Ellipsometry and Auger measurements indicate that the (200)-TiN growth on the bare Si substrates is correlated with the formation of a thin, {approx_equal}2 nm, layer of SiN during the predeposition procedure. On these surfaces we found a significant increase of Q{sub i} for both high and low electric field regimes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface orientation dependent band alignment for CuInSe{sub 2}-ZnSe-ZnO

The interface formation and band-lineup between ZnO and epitaxial CuInSe{sub 2} substrates is investigated with photoelectron spectroscopy. ZnO films prepared by a metal-organic molecular beam epitaxy process lead to the formation of an intrinsic ZnSe buffer layer. The effect of substrate orientation on the band alignment is studied for the orientations (112) and (001). We found a weak dependence of the interfacial dipole on orientation. Together with our findings for CuInS{sub 2} films, we suggest a ubiquitous CuInX{sub 2}-ZnX-ZnO (X=Se, S) structure with an ultra-thin ZnX buffer layer for ZnO growth on chalcopyrites at elevated temperatures.

36 MATERIALS SCIENCE↗

Chemical structure of the (Zn{sub 1-x},Mg{sub x})O/CuIn(S,Se){sub 2} interface in thin film solar cells

The formation of the interface between a magnetron sputtered (Zn{sub 1-x},Mg{sub x})O buffer layer and a CuIn(S,Se){sub 2} absorber in thin film solar cells has been investigated by x-ray photoelectron spectroscopy and x-ray induced Auger electron spectroscopy. Detailed analysis of the spectra shows the incorporation of Zn into the absorber surface in the initial stage of the deposition process forming ZnS and/or ZnSe bonds. As a result we find the buffer layer to be Zn-depleted near the interface.

36 MATERIALS SCIENCE↗

Pulsed-laser epitaxy of metallic delafossite PdCrO 2 films

Alternate stacking of a highly conducting metallic layer with a magnetic triangular layer found in delafossite PdCrO 2 provides an excellent platform for discovering intriguing correlated quantum phenomena. Thin film growth of delafossites may enable not only the tuning of the basic physical properties beyond what bulk materials can exhibit, but also the development of novel hybrid materials by interfacing with dissimilar materials, yet this has proven to be extremely challenging. Here, we report the epitaxial growth of metallic delafossite PdCrO 2 films by pulsed laser epitaxy (PLE). The fundamental role of the PLE growth conditions, epitaxial strain, and chemical and structural characteristics of the substrate is investigated by growing under various growth conditions and on various types of substrates. While strain plays a large role in improving the crystallinity, the direct growth of epitaxial PdCrO 2 films without impurity phases was not successful. We attribute this difficulty to both the chemical and structural dissimilarities with the substrate and volatile nature of the PdO sublayer, which make nucleation of the right phase difficult. This difficulty was overcome by growing CuCrO 2 buffer layers before PdCrO 2 films were grown. Unlike PdCrO 2 , CuCrO 2 films were readily grown with a relatively wide growth window. Only a monolayer thick buffer layer was sufficient to grow the correct PdCrO 2 phase. This result indicates that the epitaxy of Pd-based delafossites is extremely sensitive to the chemistry and structure of the interface, necessitating near perfect substrate materials. The resulting films are commensurately strained and show an antiferromagnetic transition at 40 K that persists down to as thin as 3.6 nm in thickness. This work provides key insights into advancing the epitaxial growth of the broader class of metallic delafossites for both studying the basic physical properties and developing new spintronic and computing devices.

36 MATERIALS SCIENCE↗

Initial growth stage evaluation of high quality ZnSe films deposited on glass substrate

Initial growth stage evaluation of high quality ZnSe films deposited on a glass substrate was investigated. The self-limiting monolayer epitaxial process was used to pregrowth the buffer layer for a zinc selenide (ZnSe) film deposited. After alternating depositions for several cycles, the growth mode was changed to the molecular beam deposition mode under growth conditions. Films deposited at substrate temperatures of 250-350 deg. C and Se/Zn beam equivalent pressure ratios of 0.77-1.87 were investigated. The crystal structure and the preferred orientation of as-grown ZnSe films were examined using x-ray diffraction patterns. The optical properties of the ZnSe films were revealed by photoluminescence spectra. The characteristics of the ZnSe films with and without a buffer layer were compared and discussed in detail. Finally, the results demonstrate how the quality of ZnSe film can be improved on glass substrates for application to various devices.

36 MATERIALS SCIENCE↗

X-ray diffraction study of short-period AlN/GaN superlattices

The structure of short-period hexagonal GaN/AlN superlattices (SLs) has been investigated by X-ray diffraction. The samples have been grown by metalorganic vapor-phase epitaxy (MOVPE) in a horizontal reactor at a temperature of 1050°C on (0001)Al{sub 2}O{sub 3} substrates using GaN and AlN buffer layers. The SL period changes from 2 to 6 nm, and the thickness of the structure varies in a range from 0.3 to 1 μm. The complex of X-ray diffraction techniques includes a measurement of θ-2θ rocking curves of symmetric Bragg reflection, the construction of intensity maps for asymmetric reflections, a measurement and analysis of peak broadenings in different diffraction geometries, a precise measurement of lattice parameters, and the determination of radii of curvature. The thickness and strain of separate SL layers are determined by measuring the θ-2θ rocking curves subsequent simulation. It is shown that most SL samples are completely relaxed as a whole. At the same time, relaxation is absent between sublayers, which is why strains in the AlN and GaN sublayers (on the order of 1.2 × 10{sup −2}) have different signs. An analysis of diffraction peak half-widths allows us to determine the densities of individual sets of dislocations and observe their change from buffer layers to SLs.

36 MATERIALS SCIENCE↗

Oxides Heterostructures for Nanoelectronics

We summarise in this paper the work of two groups focusing on the synthesis and characterisation of functional oxide for nanoelectronic applications. In the first section, we discuss the growth by liquid-injection MOCVD of oxides heterostructures. Interface engineering for the minimisation of silicate formation during the growth of polycrystalline SrTiO{sub 3} on Si is first presented. It is realised via the change of reactant flow or chemical nature at the Si surface. We then report on the epitaxy on oxide substrates of manganites films and superlattices and on their magnetic and electrical properties. La{sub 0.7}Sr{sub 0.3}MnO{sub 3} and La{sub 0.8}MnO{sub 3-{delta}} as well as multiferroic hexagonal ReMnO{sub 3} manganites are considered. We show that the film thickness and related strain may be used to tune the properties. Finally, we demonstrate the growth of MgO nanowires by CVD at a moderate temperature of 600 C, using gold as a catalyst. In the second section, we discuss the growth of epitaxial oxide heterostructures by MBE. First, the direct epitaxy of SrTiO{sub 3} on Si is considered. Issues and control of the SrTiO{sub 3}/Si interface are discussed. An abrupt interface is achieved. We show that SrTiO{sub 3} on Si can be used as a buffer layer for the epitaxy of various perovskite oxides such as LaAlO{sub 3} or La{sub 0.7}Sr0.3MnO{sub 3}. La{sub 0.7}Sr{sub 0.3}MnO{sub 3} films are ferromagnetic and metallic at room temperature. The epitaxial growth of complex oxides on Si wafers opens up the route to the integration of a wide variety of functionalities in nanoelectronics. Finally, we discuss the monolithic integration of III-V compounds such as InP on Si using epitaxial SrTiO{sub 3} buffer layers for the future integration of optics on Si.

36 MATERIALS SCIENCE↗

High-quality II-VI films grown on amorphous substrates using tunable tetradymite templates

We demonstrate the growth of highly oriented CdSe and ZnTe films at ~300 °C on amorphous substrates such as glass and flexible polyimide using ultrathin tetradymite buffer layers composed of Sb x Bi 2-x Te 3 alloys lattice-matched to the film overgrowth. This leads to significant improvement of the crystallinity, roughness, grain size, and pit density of the II-VI overlayer along with enhancement of the optoelectronic properties. For example, photoluminescence emission is observed at ~1.74 eV for optimized CdSe films, the same as in a single crystal reference. An in-plane carrier diffusion length of ~500 nm is inferred from transient optical data. The use of tetradymite buffer layers to control II-VI compound deposition on non-crystalline substrates is a promising route for large area optoelectronic applications such as photovoltaic, light-emission, or infrared detector devices.

36 MATERIALS SCIENCE↗

Strain engineering to control the magnetic and magnetotransport properties of La0.67Sr0.33MnO3 thin films

This work studies the control of the magnetic and magnetotransport properties of La{sub 0.67}Sr{sub 0.33}MnO{sub 3} thin films through strain engineering. The strain state is characterized by the tetragonal distortion (c/a ratio), which can be varied continuously between a compressive strain of 1.005 to a tensile strain of 0.952 by changing the type of substrate, the growth rate, and the presence of an underlying La{sub 0.67}Sr{sub 0.33}FeO{sub 3} buffer layer. Increasing tensile tetragonal distortion of the La{sub 0.67}Sr{sub 0.33}MnO{sub 3} thin film decreases the saturation magnetization, changes the temperature dependence of the resistivity and magnetoresistance, and increases the resistivity by several orders of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-assembled vertically aligned nanocomposite systems integrated on silicon substrate: Progress and future perspectives

Silicon (Si) integration is a critical step for implementing functional oxides into Si-based electronic devices, considering the advantages of low-cost and scalability of Si substrates. In the past decade, self-assembled vertically aligned nanocomposites (VANs) have attracted enormous research interest owing to their unique multifunctionalities and highly tunable physical properties as well as their one-step self-assembly process. Most of the VAN thin films have been reported to grow epitaxially on single crystalline oxide substrates, however, with limited systems reported on Si substrates due to the very large lattice mismatch between oxides and Si lattices. In this review, the current progress for self-assembled VAN systems integrated on a Si substrate is summarized. Buffer layered enabled VAN growth has been proven to be an effective approach for improving the epitaxial quality of oxide-oxide and oxide-metal VAN systems, while direct growth is preferred in nitride-metal VAN systems. Furthermore, the material versatility enables the Si-integrated VAN thin films to exhibit distinct physical properties such as ferromagnetism, ferroelectricity, magnetoresistance, as well as unique optical properties. The review also summarizes the various parameters for tuning the growth morphologies and corresponding properties for the VAN systems, including phase molar ratio, deposition frequency, buffer layers, background pressure, etc. Finally, future perspectives are discussed including new VAN system exploration, physical properties tuning, as well as design and fabrication of Si-based nanoelectronics and nanophotonic devices applications.

36 MATERIALS SCIENCE↗

Thermochemical Assessment of Oxygen Gettering by SiC or ZrC in PuO2-x TRISO Fuel

Particulate nuclear fuel in a modular helium reactor is being considered for the consumption of excess plutonium and related transuranics. In particular, efforts to largely consume transuranics in a single-pass will require the fuel to undergo very high burnup. This deep burn concept will thus make the proposed plutonia TRISO fuel particularly likely to suffer kernel migration where carbon in the buffer layer and inner pyrolytic carbon layer is transported from the high temperature side of the particle to the low temperature side. This phenomenon is oberved to cause particle failure and therefore must be mitigated. The addition of SiC or ZrC in the oxide kernel or in a layer in communication with the kernel will lower the oxygen potential and therefore prevent kernel migration, and this has been demonstrated with SiC. In this work a thermochemical analysis was performed to predict oxygen potential behavior in the plutonia TRISO fuel to burnups of 50% FIMA with and without the presence of oxygen gettering SiC and ZrC. Kernel migration is believed to be controlled by CO gas transporting carbon from the hot side to the cool side, and CO pressure is governed by the oxygen potential in the presence of carbon. The gettering phases significantly reduce the oxygen potential and thus CO pressure in an otherwise PuO2-x kernel, and prevent kernel migration by limiting CO gas diffusion through the buffer layer. The reduction in CO pressure can also reduce the peak pressure within the particles by ~50%, thus reducing the likelihood of pressure-induced particle failure. A model for kernel migration was used to semi-quantitatively assess the effect of controlling oxygen potential with SiC or ZrC and did demonstrated the dramatic effect of the addition of these phases on carbon transport.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrical and optical characterization of CdTe solar cells with CdS and CdSe buffers—A comparative study

A study is reported comparing the electrical and optical properties of CdTe solar cells, prepared using CdS and CdSe buffer layers, to investigate defects in the bulk and interface, carrier transport, and recombination. Temperature dependent capacitance-voltage measurement and admittance spectroscopy were used to extract carrier concentration, resistivity, charge carrier mobility, and their temperature dependence. We identify the presence of two defect signatures corresponding to carrier freeze-out and the formation of a Schottky back-contact barrier. The back-contact barrier height (≈ 300 meV) extracted from the temperature dependent current density-voltage (JVT) experiment was confirmed by conventional admittance spectroscopy. The activation energies of mobility (resistivity) are 101.2 ± 2.5 meV (92.6 ± 2.3 meV) and 84.7 ± 2.7 meV (77.6 ± 4.5 meV) for CdS and CdSe buffer layers, respectively. Intensity dependent photoluminescence analysis demonstrates that the CdSe/CdTe device exhibits lower radiative efficiency than the CdS/CdTe device. This confirms the presence of higher defects in CdSe/CdTe device corroborated by temperature-dependent V OC analysis. Here, the comparative electrical and optical analysis provides insight to improving the performance of CdTe solar cell device by selenization.

14 SOLAR ENERGY↗

Thermo-Mechanical Analysis of Coated Particle Fuel Experiencing a Fast Control Rod Ejection Transient

A rapid increase of the temperature and the mechanical stress is expected in TRISO coated particle fuel that experiences a fast Total Control Rod Ejection (CRE) transient event. During this event the reactor power in the pebble bed core increases significantly for a short time interval. The power is deposited instantly and locally in the fuel kernel. This could result in a rapid increase of the pressure in the buffer layer of the coated fuel particle and, consequently, in an increase of the coating stresses. These stresses determine the mechanical failure probability of the coatings, which serve as the containment of radioactive fission products in the Pebble Bed Reactor (PBR). A new calculation procedure has been implemented at the Idaho National Laboratory (INL), which analyzes the transient fuel performance behavior of TRISO fuel particles in PBRs. This early capability can easily be extended to prismatic designs, given the availability of neutronic and thermal-fluid solvers. The full-core coupled neutronic and thermal-fluid analysis has been modeled with CYNOD-THERMIX. The temperature fields for the fuel kernel and the particle coatings, as well as the gas pressures in the buffer layer, are calculated with the THETRIS module explicitly during the transient calculation. Results from this module are part of the feedback loop within the neutronic-thermal fluid iterations performed for each time step. The temperature and internal pressure values for each pebble type in each region of the core are then input to the PArticle STress Analysis (PASTA) code, which determines the particle coating stresses and the fraction of failed particles. This paper presents an investigation of a Total Control Rod Ejection (TCRE) incident in the 400 MWth Pebble Bed Modular reactor design using the above described calculation procedure. The transient corresponds to a reactivity insertion of $3 (~2000 pcm) reaching 35 times the nominal power in 0.5 seconds. For each position in the core the coated particle temperature and the stress history during a TCRE transient has been computed and the fuel failure probability has been quantified.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Structural, optical and gas sensing properties of vertically well-aligned ZnO nanowires grown on graphene/Si substrate by thermal evaporation method

Highlights: • Vertically well-aligned ZnO NW arrays with high aspect ratio and extremely large-surface-volume ratio were synthesized on graphene/Si substrate without the aid of metal catalyst by a simple thermal evaporation. • The gas sensor based on the vertical ZnO NW arrays-graphene structure exhibited high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200oC, and could be used to detect NO{sub 2} gas at very low levels (2, 6, 10 ppm). • The excellent sensing performance is mainly because of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. • The common defects and optical properties of the ZnO NW arrays-graphene structure were studied in detail. • The possible growth mechanism of vertically well-aligned ZnO NWs on graphene and the gas-sensing mechanism of sensors were proposed. - Abstract: We report catalyst-free vertical growth of high-density ZnO nanowire (NW) arrays on Si substrate with a graphene buffer layer by thermal evaporation method. Structural, surface morphology, chemical composition and optical properties of ZnO NWs were studied by Field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) and Raman spectroscopy. The results indicate that the grown ZnO NWs are single-crystalline and exhibit the hexagonal wurtzite crystal structure with a preferred orientation along the [0001] direction; all of the ZnO NWs vertically grow on the graphene/Si substrate. The majority of the as-grown NWs have diameters in the range of 250–300 nm and length up to several tens of micrometers, whereas a small portion of NWs have a diameter of approximately of 9–12 nm. Room temperature PL spectrum of the ZnO NWs exhibits a sharp and strong ultraviolet emission at 380 nm and a weak visible emission at around 516 nm. The role of graphene buffer layer in the vertical-aligned ZnO NW arrays growth and its improved optical properties is demonstrated. Importantly, the gas sensor based on these ZnO NWs exhibits high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200 °C, and can detect NO{sub 2} concentration as low as 2, 6 and 10 ppm. The excellent sensing performance is mainly due to the combination of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. Such a ZnO NW/graphene structure is very promising for various applications, such as photonic, optoelectronic and sensor devices. In addition, the possible growth mechanism and the NO{sub 2} sensing gas mechanism of the ZnO NWs-graphene structure have been discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comprehensive Fuel Performance Model Development and Simulation for TRISO Fuel

High Temperature Gas Reactor (HTGR), widely recognized as one of the top candidates for the Next Generation Nuclear Power-plant (NGNP) fleet, has received ever-increasing interest due to its superior safety and many other desirable features. TRISO fuel particles are the basic form of the fuel used in both pebble-bed and prismatic reactors. Since they are a key component of the HTGR core design, the success of the reactor depends on the safety and quality of the TRISO particles. During operation, a TRISO particle undergoes complex thermo-mechanical processes. Fission gases accumulate inside the kernel and the buffer layer, and lead to buildup of internal pressure. Uneven thermal conditions lead to asymmetric thermal expansion. The pyrolytic carbon, in both the IPyC and OPyC layers, is known to experience dimensional change (shrinkage or swelling) under fast neutron irradiation. In the mean time, both the IPyC and OPyC layers creep as a function of stress and fast neutron fluence. Macro cracks in the IPyC layer, corrosion in the SiC layer due to chemical attack, and debonding at the interface between IPyC and SiC, have been observed in post-irradiation examinations. All these processes further complicate the stress states in a TRISO particle, and might lead to failure of a single coating layer or the particle as a whole. It is very difficult to duplicate the actual environment that a particle is exposed to in experiments. It is even more difficult to isolate one process from another, thus making it nearly impossible to evaluate the impacts that a particular process has on the fuel particle by conducting experiments. The problem can however at least partially be addressed by modeling and simulation. Hence, multi-dimensional, multi-physics and comprehensive models are greatly needed to simulate and evaluate the performance of a TRISO particle under normal and accidental conditions. Existing models are inadequate as they are usually one-dimensional models that over-simplified these processes or do not include all the main physics. The goal of this thesis is to develop a comprehensive, multi-dimensional and multi-physics model to simulate and evaluate TRISO fuel performance. It includes all the main processes taking place in the fuel particle. Three equally important components of this modeling exercise are: 1) 3D heat transfer and temperature distribution analysis; 2) 3D neutronics, heat generation, and fission gas generation and release analysis; 3) 3D stress analysis and failure prediction of the TRISO particle. The 3D thermal model consists of the solution of the heat conduction equation using the finite difference technique. The temperature calculated using this model is compared to analytical solutions and to the results reported in literature. Good agreements are observed. Thermal models are developed to calculate temperature distribution in a pebble under different power and asymmetric convective boundary conditions caused by, for example, contacts with other pebbles. Three-dimensional temperature distribution in a TRISO particle is also calculated under various conditions such as in the presence of an off-center gas bubble. Three-dimensional neutronics models are developed using MCNP5/X. Burnup calculations are performed to track the number densities of a few important isotopes and to calculate gas production. The fractional gas release on both intra- and inter-granular level are calculated using the White and Tucker’s model. The gas pressure inside the buffer layer is also quantified. Finally, 3D axisymmetric stress models are developed using an open-source finite element code, FEAP. Modifications are introduced to FEAP to include PyC shrinkage and creep, etc. The modified code is benchmarked against Miller’s results, and good agreements are observed. A number of variables are studied to evaluate their impacts on stresses and failure probabilities. These variables include creep constant, creep Poisson’s ratio, irradiation temperature, BAF, layer thickness, etc. Some transient thermal conditions such as power surge, and defective cases such as a radial crack in IPyC, debonding and corrosion to SiC, are also studied. Among all, a few variables/conditions have significant impacts on stresses and failure probabilities, namely: shrinkage strain, creep constant, creep Poisson’s ratio, particle size, irradiation temperature, BAF and cracked IPyC. Order of magnitude of stresses resulting from temperature changes, pressure buildup due to gas generation, and due to PyC shrinkage/creep show that in the case of TRISO particle (when using specific empirical constants or existing dataset found in literature to calculate shrinkage/creep strains), stresses due to temperature changes and internal gas pressure are orders of magnitude lower than those resulting from shrinkage/creep. Failure probabilities of both IPyC and SiC are also calculated. The failure probability of IPyC under most conditions borderlines with the design requirement (1E-4) except under low irradiation temperature. The failure probability of SiC under normal conditions is minimal because it is always under compression; except when there is a radial crack in IPyC, in which case the stress in part of SiC becomes tensile and the failure probability is higher than 1E-4, and increases at higher burnup. The comprehensive fuel performance model developed in this work and implemented in a suite of computer codes simulates the thermo-mechanical behavior of a TRISO fuel particle under irradiation. This work leads to a better understanding of TRISO fuel particle evolution over its lifetime, and provides insights in how to improve the safety and reliability of TRISO fuel. The models developed here can be useful for other purposes related to TRISO fuel or for fuel performance evaluation of other forms of nuclear fuels. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗