SEARCH · Search NASA

Results for “buried”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1987

The Martian sedimentary record

The differences between the surface geology of Mars and earth are discussed. Sedimentary processes and fluvial systems on Mars are examined. Surface mapping reveals the more recent depostional patterns. In future missions, radar sounding, active seismic systems, and on site deep drilling may be required to fully document the depositional history. For the present, identification of sedimentary layers must rest on localities of tectonic or erosional windows, detection of buried surfaces by indirect methods, and deposition or off lap patterns of distribution.

Dehon, R. A.↗

NASA NTRS1987

Progress in determining the thickness and distribution of volcanic materials on Mars

Volcanic plains and constructs comprise over half the surface of Mars. Volume estimates require sensible estimates of the thickness of volcanic materials. The completion of the 1:2 M Viking photomosaics and a refined geologic map based on Viking photography set the stage for improved thickness studies and volume estimates. Currently, a revised (but incomplete) data base of 740 partially buried craters was compiled using Mars photomosaics at 1:2 M for initial identification and measurement.

Dehon, R. A.↗

NASA NTRS1988

Role of zircon in tracing crustal growth and recycling

Single crystal ion probe ages of zircons is discussed, which allow much better time resolution compared to other geochronological methods, although the technique is not without problems. Rocks from two areas that contain composite zircon populations, including true magmatic zircons as well as a variety of xenocrystic types are described. It is often difficult to distinguish these; xenocrystic zircons, for example, cannot always be identified on the basis of morphology alone. Additional evidence is needed before making age interpretations. Evidence is also presented of zircon growth long after the original time of crystallization, in some cases apparently at temperatures less than 300 C. The spectacular discovery of 4.1 to 4.2 Ga detrital zircons in metaquartzites from the Mount Narryer area of Western Australia is described. Similar zircons with ages as old as 4276 Ma have been found in the nearby Jack Hills area. The source areas or parent lithologies of these zircons have not yet been determined, but the author expects that they may be unrecognized or buried antecedents of the K rich Narryer gneisses. U or Th concentrations of zircon cannot be used to discriminate between felsic and mafic source rocks.

Compston, W.↗

NASA NTRS1988

A compilation of information and data on the Manson impact structure

A problem for the impact hypothesis for the Cretaceous-Tertiary (K-T) mass extinction is the apparent absence of an identifiable impact site. The Manson Impact Structure is a candidate because it is the largest recognized in the U.S.; it is relatively close to the largest and most abundant shocked quartz grains found at the K-T boundary; and its age is indistinguishable from that of the K-T boundary based on paleontological evidence, fission track dates, and preliminary Ar-40/Ar-39 measurements. The region of northwest central Iowa containing the Manson Impact Structure is covered by Quaternary glacial deposits underlain by Phanerozoic sedimentary rocks (mostly flat-lying carbonates) and Proterozoic red clastic, metamorphic, volcanic, and plutonic rocks. In a circular area about 22 miles (35 km) in diameter around Manson, Iowa, this normal sequence is absent or disturbed and near the center of the disturbed area granitic basement rocks have been uplifted some 20,000 ft (6000m). Attention was drawn to Manson initially by the unusual quality of the groundwater there. Within the structure three roughly concentric zones of rock associations have been identified: (1) displaced strata; (2) completely disrupted strata, and igneous and metamorphic rocks. Manson was established as an impact structure based on its circular shape, its central uplift, and the presence of shocked quartz within the granitic central uplift. A gravity survey identified locations of low-density brecciated rocks and high-density uplifted crystalline rocks, but the outer boundary of the structure could not be established. Aeromagnetic and ground magnetic surveys showed locations and depths of shallowly buried crystalline rock and the locations of faults. A refraction seismic survey identified the crystalline central uplift, determined that the average elevation of bedrock is 70 ft (20 m) higher outside the structure than within, and was used to map the bedrock topography within the structure. A connection between the Manson impact and the K-T boundary may be established or refuted through study of the impact energy, the impact time, and composition of host rock, possible impactors, and impact melts.

Hartung, Jack B.↗

NASA NTRS1987

High performance visible and near-infrared charge-coupled-device array for spectroscopy applications

This paper describes the design and performance of a scientific CCD array for use in NASA's Shuttle Image Spectrometer Experiment. The device is a four-phase, buried-channel CCD structure that operates in the frame-transfer mode. The sensor consists of 64 x 404 pixels, has a 100 percent fill factor, and operates in the visible and near-infrared spectral regions. In operation, the 404 horizontal elements provide spatial information, while the 64 vertical elements give spectral information covering the wavelength range of 400 to 1000 nm in 10 nm increments. The high full-well capacity of each pixel and low noise floor yield a dynamic range of more than 95 dB. In addition, the device has been designed to have good linearity characteristics. The unique dual-output structure allows a horizontal row to be read out to the right or to the left, or it can be split from the middle to both right and left output circuits simultaneously for high speed applications. The power dissipation of the device is about 60 mW.

Wang, Weng-Lyang↗

NASA NTRS1987

The radar-glory theory for icy moons with implications for radar mapping

The anomalous radar echoing properties of three ice-clad moons of Jupiter appear to be due to glory-like backscattering from buried craters. The enormous glare from these sources would impair geologic studies based on standard methods of radar mapping. It is not known whether similar or different problems will arise in the radar study of other icy surfaces in the outer solar system, or of the unseen surface of Titan. In any event, the results from the moons of Jupiter illustrate the role of exploratory measurements and the importance of possible bistatic radar-mapping techniques based on the use of separated transmitters and receivers.

Eshleman, Von R.↗

NASA NTRS1988

Minority-carrier lifetime analysis of silicon epitaxy and bulk crystals with nonuniformly distributed defects

Existing analyses of the pulsed response of an MOS capacitor for minority-carrier lifetime determination result in a lifetime value averaged over most of the depletion region width. In this report, an analysis of MOS C-t data is presented that enables minority-carrier generation lifetime to be plotted as a function of depletion region depth. The technique is shown to be useful for samples with bulk or buried interfacial layer defects that have defect-free surfaces. Data are presented for intrinsically gettered bulk crystals and extrinsically gettered Si(2-pct Ge) epitaxial layers with misfit dislocations. In addition, for samples that do have uniform lifetimes, the measurement time required for determining carrier lifetime has been reduced by more than an order of magnitude.

Radzimski, Zbignew↗

NASA NTRS1987

Talemzane - Algerian impact crater detected on SIR-A orbital imaging radar

In November, 1981, NASA's first Shuttle Imaging Radar mission (SIR-A) began producing maplike photographic strips of Earth scenes from orbital altitude. A Saharan radar image acquired over Algeria clearly delineates two sedimentary basins, Erg Occidental and Erg Oriental, separated by an elongated zone of exposed bedrock, the M'Zab Chebka. At the NE margin of the Chebka, rimrocks, slopes, and ejecta deposits of Talemzane meteorite impact crater appear as a distinct two km wide radar-bright ring. This unique circle of strong radar backscatter distinguishes the solitary impact structure from numerous dayas (similarly appearing karstic depressions) which characterize the region. The crater is prominent on radar, but is obscure on optically obtained satellite and aircraft images, as are partly buried fluvial drainage systems and fault-block traces developed in bedrocks of the Chebka. Radar detection of an annular drainage system indicates possible presence of a ring graben at the crater. Brightest radar signals on the image are cultural features at recently developed gas fields near Hassi er R'Mel.

Mchone, John F.↗

NASA NTRS1988

Ultralow threshold graded-index separate-confinement heterostructure single quantum well (Al, Ga) As lasers

Broad area graded-index separate-confinement heterostructure single quantum well lasers grown by molecular-beam epitaxy (MBE) with threshold current density as low as 93 A/sq cm (520 microns long) have been fabricated. Buried lasers formed from similarly structured MBE material with liquid phase epitaxy regrowth had threshold currents at submilliampere levels when high reflectivity coatings were applied to the end facets. A CW threshold current of 0.55 mA was obtained for a laser with facet reflectivities of about 80 percent, a cavity length of 120 micron, and an active region stripe width of 1 micron. These devices driven directly with logic level signals have switch-on delays less than 50 ps without any current prebias. Such lasers permit fully on-off switching while at the same time obviating the need for bias monitoring and feedback control.

Derry, P. L.↗

NASA NTRS1987

Subphotospheric current systems and flares

Subphotospheric current systems inferred from recent vector magnetograph observations imply the existence of electric currents penetrating the photosphere and thus flowing deep in the solar convection zone. These currents presumably originate in an internal dynamo that supplies the observed photospheric magnetic fields through the buoyant motions of the initially deeply-buried flux tubes. The coronal fields resulting from this process therefore must carry slowly-varying currents driven by emfs remote from the surface. These currents may then drive solar-flare energy release. This paper discusses the consequences of such a deep origin of the coronal parallel currents. Simple estimates for a large active region suggest a mean current-closure depth of not less than 10,000 km, with a subphotospheric inductance of not less than 100 H and a subphotospheric stored energy of not less than 10 to the 33rd ergs.

Hudson, Hugh S.↗

NASA NTRS1988

Gravity domains and assembly of the North American continent by collisional tectonics

A gravity trend map of North America, based on a horizontal Bouguer gravity gradient map produced from gravity data for Canada and the conterminous United States, is presented and used to define a continental mosaic of gravity trend domains akin to structural domains. Contrasting trend characteristics at gravity domain boundaries support the concept of outward growth of the continent primarily by accretionary tectonics. Gravity patterns, however, indicate a different style of tectonics dominated in the development of now-buried Proterozoic orogenic belts in the south-central United States, supporting a view that these belts formed along the leading edge of a southward-migrating Proterozoic continental margin.

Thomas, M. D.↗

NASA NTRS1989

Heat-Flux Sensor For Hot Engine Cylinders

Heat-flux sensor includes buried wire thermocouple and thin-film surface thermocouple, made of platinum and platinum with 13 percent rhodium. Sensor intended for use in ceramic-insulated, low-heat-rejection diesel engine at temperatures of about 1,000 K. Thermocouple junction resists environment in cylinder of advanced high-temperature diesel engine created by depositing overlapping films of Pt and 0.87 Pt/0.13 Rh on iron plug. Plug also contains internal thermocouple.

Kim, Walter S.↗

NASA NTRS1989

SEU In An Advanced Bipolar Integrated Circuit

Report summarizes investigation of single-event upsets (SEU) in bipolar integrated-circuit set of flip-flops (memory cells). Device tested made by advanced digital bipolar silicon process of Honeywell, Inc. Circuit chip contained 4 cells. Construction enabled study of effect of size on SEU behavior. Each cell externally biased so effect of bias current on SEU behavior. Results of study provides important information for optimal design of devices fabricated using buried-layer bipolar process operating in heavy-ion SEU environments. Designers use information to provide required levels of suppression of SEU in specific applications via combinations of size and/or cell-current scaling.

Zoutendyk, John A.↗

NASA NTRS1989

Real-Time Optimization Of Receiver Bandwidth

Estimates of signal and noise spectra enhance reception of weak signals. Carrier-tracking phase-locked loop represented by linear mathematical model at small rms phase errors. Loop continuously generates estimates of received phase. Bandwidth (in effect, scale of complex-frequency variable p) optimized to minimize rms phase error. Minimum signals tracked 5 to 15 dB below those tracked by current receivers. Improvement accomplished by use of bandwidths of 0.1 to 1.0 Hz, in contrast with 3-Hz bandwidth in current use. Principle of real-time optimization of bandwidth adapted to other situations to enhance reception of weak signals otherwise "buried" in noise.

Vilnrotter, V. A.↗

NASA NTRS1987

Crater ejecta morphology and the presence of water on Mars

The possible effects of projectile, target, and environment on the cratering process is reviewed. It is suggested that contradictions in interpreting Martian crater ejecta morphologies reflect over simplifying the process as a singular consequence of buried water. It seem entirely possible that most ejecta facies could be produced without the presence of liquid water. However, the combination of extraordinary ejecta fluidity, absence of secondaries, and high ejection angles all would point to the combined effects of atmosphere and fluid rich substrates. Moreover, recent experiments revealing the broad scour zone associated with rapid vapor expansion may account for numerous craters in the circumpolar regions with subtle radial grooving extending 10 crater radii away with faint distal ramparts. Thus certain crater ejecta morphologies may yet provide fundamental clues for the presence of unbound water.

Schultz, P. H.↗

NASA NTRS1988

Shock tube investigation of dynamic response of pressure transducers for validation of rotor performance measurements

For some time now, NASA has had a program under way to aid in the validation of rotor performance and acoustics codes associated with the UH-60 rotary-wing aircraft; and to correlate results of such studies with those obtained from investigations of other selected aircraft rotor performance. A central feature of these studies concerns the dynamic measurement of surface pressure at various locations up to frequencies of 25 KHz. For this purpose, fast-response gauges of the Kulite type are employed. The latter need to be buried in the rotor; they record surface pressures which are transmitted by a pipette connected to the gauge. The other end of the pipette is cut flush with the surface. In certain locations, the pipette configuration includes a rather sharp right-angle bend. The natural question has arisen in this connection: In what way are the pipettes modifying the signals received at the rotor surface and subsequently transmitted to the sensitive Kulite transducer element. The basic details and results of the program performed and recently completed in the High Pressure Shock Tube Laboratory of the Department of Aeronautics and Astronautics at Stanford University are given.

Bershader, Daniel↗

NASA NTRS1988

A manned lunar outpost. Design considerations for three key elements in an initial manned lunar outpost

The Initial Manned Lunar Outpost (IMLO) is proposed as the initial permanent base for manned activities on the Moon. The study concentrated on identifying the equipment, support systems, and initial base configuration necessary to accomplish the various science, industrial and exploration activities planned. The primary concepts of the MLO were the use of hard modules for habitation areas creating a flexible, modular transportation system; designing a multi-functional vehicle; and using an overhead radiation protection system. The transportation system, dubbed the Lunar Mobile Surface Transport System (LMSTS), carries the hard modules to the surface of the moon and provides a method to move them to the desired location through the use of interchangeable pallets. The avionics pallets are changed-out with wheel and hitch pallets, transforming the LMSTS into a "tractor trailer" used with the Multi-Functional Vehicle (MFV). The modules are placed under the Regolith Support Structure (RSS) which provides a stable environment and radiation protection for the entire base. The overhead structure was chosen over simply burying the modules to provide a study on the advantages and disadvantages of this type of system. The advantages include easy access to the exterior of the modules, providing a protected area for vehicles and equipment used in EVA, and creating an area of constant temperature. Disadvantages include a need for prefabrication of structural components, including the preconstruction and construction phases of the initial MLO. The design approach taken considered existing and near-term materials and technology only, without the consideration of possible future building technologies.

Bell, Larry↗

NASA NTRS1988

Radiation protective structure alternatives for habitats of a lunar base research outpost

The solar and galactic cosmic radiation levels on the Moon pose a hazard to extended manned lunar missions. Lunar soil represents an available, economical material to be used for radiation shielding. Several alternatives have been suggested to use lunar soil to protect the inhabitants of a lunar base research outpost from radiation. The Universities Space Research Association has requested that a comparative analysis of the alternatives be performed, with the purpose of developing the most advantageous design. Eight alternatives have been analyzed, including an original design which was developed to satisfy the identified design criteria. The original design consists of a cylindrical module and airlock, partially buried in the lunar soil, at a depth sufficient to achieve adequate radiation shielding. The report includes descriptions of the alternatives considered, the method of analysis used, and the final design selected.

Bell, Fred J.↗