Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Iridium-Doped Ruthenium Oxide Catalyst for Oxygen Evolution

NASA requires a durable and efficient catalyst for the electrolysis of water in a polymer-electrolyte-membrane (PEM) cell. Ruthenium oxide in a slightly reduced form is known to be a very efficient catalyst for the anodic oxidation of water to oxygen, but it degrades rapidly, reducing efficiency. To combat this tendency of ruthenium oxide to change oxidation states, it is combined with iridium, which has a tendency to stabilize ruthenium oxide at oxygen evolution potentials. The novel oxygen evolution catalyst was fabricated under flowing argon in order to allow the iridium to preferentially react with oxygen from the ruthenium oxide, and not oxygen from the environment. Nanoparticulate iridium black and anhydrous ruthenium oxide are weighed out and mixed to 5 18 atomic percent. They are then heat treated at 300 C under flowing argon (in order to create an inert environment) for a minimum of 14 hours. This temperature was chosen because it is approximately the creep temperature of ruthenium oxide, and is below the sintering temperature of both materials. In general, the temperature should always be below the sintering temperature of both materials. The iridium- doped ruthenium oxide catalyst is then fabricated into a PEM-based membrane- electrode assembly (MEA), and then mounted into test cells. The result is an electrolyzer system that can sustain electrolysis at twice the current density, and at the same efficiency as commercial catalysts in the range of 100-200 mA/sq cm. At 200 mA/sq cm, this new system operates at an efficiency of 85 percent, which is 2 percent greater than commercially available catalysts. Testing has shown that this material is as stable as commercially available oxygen evolution catalysts. This means that this new catalyst can be used to regenerate fuel cell systems in space, and as a hydrogen generator on Earth.

Valdez, Thomas I.↗
NASA NTRS2012

Visible Light Responsive Catalysts Using Quantum Dot-Modified Ti02 for Air and Water Purification

The method of photocatalysis utilizing titanium dioxide, TiO2, as the catalyst has been widely studied for trace contaminant control for both air and water applications because of its low energy consumption and use of a regenerable catalyst. Titanium dioxide requires ultraviolet light for activation due to its band gap energy of 3.2 eV. Traditionally, Hg-vapor fluorescent light sources are used in PCO reactors and are a setback for the technology for space application due to the possibility of Hg contamination. The development of a visible light responsive (VLR) TiO2-based catalyst could lead to the use of solar energy in the visible region (approx.45% of the solar spectrum lies in the visible region; > 400 nm) or highly efficient LEDs (with wavelengths > 400 nm) to make PCO approaches more efficient, economical, and safe. Though VLR catalyst development has been an active area of research for the past two decades, there are few commercially available VLR catalysts; those that are available still have poor activity in the visible region compared to that in the UV region. Thus, this study was aimed at the further development of VLR catalysts by a new method - coupling of quantum dots (QD) of a narrow band gap semiconductor (e.g., CdS, CdSe, PbS, ZnSe, etc.) to the TiO2 by two preparation methods: 1) photodeposition and 2) mechanical alloying using a high-speed ball mill. A library of catalysts was developed and screened for gas and aqueous phase applications, using ethanol and 4-chlorophenol as the target contaminants, respectively. Both target compounds are well studied in photocatalytic systems serve as model contaminants for this research. Synthesized catalysts were compared in terms of preparation method, type of quantum dots, and dosage of quantum dots.

Coutts, Janelle L.↗
DOE OSTI2021

BETO 2021 Peer Review - Advanced Catalyst Synthesis and Characterization (ACSC) Project WBS 2.5.4.304; 303; 305

The Advanced Catalyst Synthesis and Characterization (ACSC) project, in close collaboration with the Chemical Catalysis for Bioenergy (ChemCatBio) Consortium enabling projects, CatCost, and the Engineering of Catalyst Scale-Up project, (1) provides fundamental insight into working catalysts leading to actionable recommendations for all of the ChemCatBio catalysis projects, (2) addresses overarching catalysis challenges central to the ChemCatBio Consortium, and (3) adapts and applies new synthesis methodologies and in situ/operando characterization capabilities to meet the evolving needs of the catalysis projects. The outcome is a transition from empirical catalyst development to rational design through the prediction of materials with targeted properties based on advanced characterization combined with computational modeling, and the synthesis of next generation catalysts with predicted structures that yield demonstrated improvements in catalytic performance. In FY18, the ACSC helped to demonstrate the utility of the complete catalyst and process development cycle for dimethyl ether to high-octane gasoline over metal-modified zeolite catalysts for the Upgrading of C1 Building Blocks project, and in FY21 will leverage capabilities, expertise, and computational models established for this effort to target next-generation catalysts for ethanol to distillates for the Upgrading of C2 Intermediates project with enhanced performance in half the time.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Ammonia decomposition catalyst systems

Disclosed are ruthenium-based catalyst systems, hafnium-based catalyst systems, and yttrium-based catalyst systems for use in ammonia decomposition. Catalyst systems include ruthenium, hafnium, and/or yttrium optionally in combination with one or more additional metals that can be catalytic or catalyst promoters. Hafnium-based and yttrium-based catalyst systems can be free of ruthenium. The catalyst systems also include a support material. Disclosed catalyst systems can decompose ammonia at relatively low temperatures and can provide an efficient and cost-effective route to utilization of ammonia as a carbon-free hydrogen storage and generation material.

McCullough, Katherine↗
DOE OSTI2021

Spectroscopic insight into carbon speciation and removal on a Cu/BEA catalyst during renewable high-octane hydrocarbon synthesis

Conversion of methanol and dimethyl ether (DME) to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu oxide during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Role of Mg:Al ratio and Pt promotion on mitigating the deactivation of Ni-based methane steam reforming catalysts

Ni-based catalysts for CH 4 steam reforming require fine-tuning to withstand deactivation under dynamic operation conditions relevant to emerging H 2 -driven technologies. This study investigates the impact of the Mg:Al ratio and Pt presence in catalyst composition on the activity and stability of industrially relevant Ni-based mono- and bimetallic catalysts during simulated daily start-up and shut-down cycles in various gas atmospheres. The evolution of the catalyst structure during extensive testing procedures was investigated in detail by complementary electron microscopy, in situ/operando XAS and XRD. The results obtained revealed that catalyst deactivation is promoted at high Mg:Al ratios and especially affects the monometallic catalysts. By converting CH 4 at lower temperatures, Pt regulates the extent of Ni oxidation and its incorporation into MgO lattice. Further prevention of catalyst deactivation was achieved by optimizing the reactor shut-down procedure to minimize the simultaneous exposure to high temperatures and H 2 O vapors. By flushing the reactor with N 2 only around the reaction extinction temperature, a fraction of Ni species is maintained in metallic state, which is beneficial for the long-term activity and reaction operation economy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst for enhanced CO 2 -methanol conversion at low temperature and pressure

Cu-ZnO-Al 2 O 3 is the most widely applied catalyst for CO 2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalysts have been successfully demonstrated. Here, by using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al 2 O 3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h –1 kg –1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO 2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO 2 dissociation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Outstanding Platinum Group Metal-free Bifunctional Catalysts for Rechargeable Zinc-Air Batteries

Developing highly active and durable catalysts for zinc-air batteries (ZAB) is critical for energy conversion and storage. Herein, we prepared Fe-N-C catalysts at a kilogram scale by the commercial VariPore™ method and the effect of synthesis conditions on the catalyst performance at ZAB air electrode was investigated. The results show the PA-450-HT exhibits excellent electrocatalytic activity toward oxygen reduction reaction (ORR) and it is the most suitable catalyst for primary ZAB with the galvanostatic polarization discharge peak power density of 149 mW cm -2 , outperforming commercial Pt-Ru/C catalysts. Additionally, the NCB-600-HT catalyst displays the half-wave potential of 0.87 V vs. RHE for ORR and ΔE value of 0.81 V (indicating outstanding ORR and OER reversibility) and exhibits excellent charge-discharge cycling durability similar to NCB-550-LT around 160 h for the secondary ZAB. This work reports outstanding bifunctional Fe-N-C catalysts for rechargeable ZAB at mass production for the first time.

25 ENERGY STORAGE↗
DOE OSTI2021

Utilizing bimetallic catalysts to mitigate coke formation in dry reforming of methane

We report dry reforming of methane (DRM) involves the conversion of carbon dioxide (CO 2 ) and methane (CH 4 ) into syngas (a mixture of hydrogen, H 2 , and carbon monoxide, CO), which can then be used to produce a wide range of products by means of Fischer-Tropsch synthesis. DRM has gained much attention as a means of mitigating damage from anthropogenic greenhouse gas (GHGs) emissions to the environment and instead utilizing these gases as precursors for value-added chemicals or to synthesize sustainable fuels and chemicals. Carbon deposition or coke formation, a primary cause of catalyst deactivation, has proven to be a major challenge in the development of DRM catalysts. The use of nickel- and cobalt-based catalysts has been extensively explored for DRM for their high activity and low cost but suffer from poor stability due to coke formation that has hindered their commercialization. Numerous articles have reviewed the various aspects of catalyst deactivation and strategies for mitigation, but few has focused on the benefit of bimetallic catalysts for mitigating coke formation. Bimetallic catalysts, often improve the catalytic stability over their monometallic counterparts due to synergistic effects resulting from two metal-to-metal interactions. This review will cover DRM literature for various bimetallic catalyst systems, including the effect of supports and promoters, on the mitigation of carbonaceous deactivation

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers

Here we demonstrate a roll-to-roll (R2R) process for direct coating of anode catalyst layers on a polymer electrolyte membrane for low-temperature water electrolysis. To develop this process, we studied catalyst ink formulation, ink-membrane interactions, and coating quality. The catalyst inks were a mixture of iridium oxide (IrO2) and Nafion in a water and alcohol dispersion medium. The type of alcohol (methanol, ethanol, propanols) and water-to-alcohol ratio were varied to determine their influence on membrane swelling, dispersion quality, and coatability. Interactions of the ink dispersion medium with the membrane were characterized using sessile-drop contact-angle measurements. These measurements show that the ratio of water to alcohol has a strong influence on how rapidly the dispersion media is absorbed by the membrane. Rheology of the catalyst inks was measured to understand the microstructure of the catalyst particles in the ink. This analysis found that 1-propanol leads to better dispersion of the IrO2 particles than ethanol. Small-scale coating samples were prepared to understand coating uniformity and formation of irregularities. Subsequently, two water/1-propanol ratios (90:10 and 75:25) were down-selected for large-scale R2R slot die coating. The R2R catalyst-coated membrane (CCM) coating process increased catalyst layer production throughput by over 500x compared to our standard lab-scale spray coating. The CCMs obtained from this process were tested as single-cell membrane electrode assemblies. They exhibited a cell voltage of 1.91 V at a current density of 2 A/cm2, which is comparable to spray-coated CCMs. In conclusion, the work presented here demonstrates a continuous, scalable manufacturing process that eliminates the need for the decal transfer step typically used in CCM production.

42 ENGINEERING↗
DOE OSTI2021

Application of Molecular Catalysts for the Oxygen Reduction Reaction in Alkaline Fuel Cells

Here, the development of precious group metal-free (PGM-free) catalysts for the oxygen reduction reaction is considered as the main thrust for the cost reduction of fuel cell technologies and their mass production. Within the PGM-free category, molecular catalysts offer an advantage over other heat-treated PGM-free catalysts owing to their well-defined structure, which enables further design of more active, selective, and durable catalysts. Even though non-heat-treated molecular catalysts with exceptional performance have been reported in the past, they were rarely tested in a fuel cell. Herein, we report on a molecular catalyst under alkaline conditions: fluorinated iron phthalocyanine (FeFPc) supported on cheap and commercially available high-surface area carbon-BP2000 (FeFPc@BP2000). It exhibits the highest activity ever reported for molecular catalysts under alkaline conditions in half-cells and fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2020

Insights into the Structure–Activity Relationships in Metal–Organic Framework-Supported Nickel Catalysts for Ethylene Hydrogenation

Solid supports play an indispensable role in heterogeneous catalysis, as they can directly affect the catalytic activity and selectivity of supported catalysts. However, the specific roles of such supports remain to be demystified owing to the difficulties in obtaining precise structural information on supported catalysts. To understand the effects of MOF topology, pore environment, and metal identity of node supports on the catalytic activity, a Ni catalyst was supported on eight Zr- or Hf-MOFs based on 8-connected nodes: namely M-NU-1200, M-NU-1000, M-NU-1008, and M-NU-1010 (M = Zr, Hf). Single-crystal X-ray diffraction (SCXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and X-ray photoelectron spectroscopy (XPS) were employed to characterize the supported catalyst structures. To investigate the support effects on their activities, the supported Ni catalysts were evaluated by using ethylene hydrogenation as a model reaction. The results revealed that all Hf-based-MOF-supported Ni catalysts exhibited higher catalytic reactivity with TOF (turnover frequency) values at least double of those isostructural Zr counterparts. Additionally, MOFs with less congested metal anchoring sites, as a result of the topology and surrounding pore environment, yielded higher TOFs, suggesting the importance of supports in dictating both the catalyst accessibility and activity. Computational analysis complemented the experimental observations and provided insights into reaction barrier differences and their performance variation. Furthermore, this study demonstrates the essential role of the supports and provides a thought for selecting/designing suitable supports in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalyst Deactivation and Its Mitigation during Catalytic Conversions of Biomass

Biofuel or biochemical production from biomass, especially lignocellulosic biomass, is the most promising option to replace fossil-based products to achieve sustainability. However, biomass is currently under-utilized because biomass conversion technologies have faced significant challenges to compete with incumbent petroleum technologies. Advancement in catalysis plays a central role in increasing the readiness of biomass conversion technologies. In this respect, improving catalyst stability is one of the well-known grand challenges for biomass conversion catalysis, which impedes the scaling up and commercialization of many biomass conversion techniques. In comparison to conventional processing of fossil fuels (petroleum, coal, and natural gas), biomass conversion is largely challenged by three unique properties of biomass-derived feedstocks—high water and oxygen content, high degree and reactivity of oxygen functionalization, and high contamination by minerals and heteroatoms—which all cause greater catalyst deactivation in different ways. Therefore, research on catalyst deactivation mitigation and catalyst regeneration is extremely important for the development of biomass conversion technologies. This review aims to highlight studies on catalyst deactivation and mitigation for catalytic processes in biomass conversion, with emphasis on the deactivation caused by the three unique characteristics of biomass-derived feedstocks. Further, this work will provide information on correlating the characteristics of biomass-derived streams, their potential impact on catalyst lifetime, and a potential mitigation approach, which could guide a more rational design of a robust catalyst and processes for biomass conversion.

09 BIOMASS FUELS↗
DOE OSTI2025

Atom Efficiency of Pd Sites for Methane Combustion: Single Atom Catalysts Versus Nanocatalysts

Methane combustion is an important reaction for energy production and methane removal from the atmosphere. This reaction highly relies on the use of noble metal Pd-based catalysts, which therefore drives the pursuit of catalysts with high atomic dispersion and activity. In this work, Pd/ceria catalysts dominated with Pd single atoms or nanosized Pd clusters (∼1 nm) are prepared and characterized by combining high-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), in situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS), and Raman and X-ray absorption spectroscopy (XAS) techniques. By comparing the turnover frequencies (TOF; per every Pd atom) of Pd/ceria single atom catalysts and nanocatalysts, it is found that the atom efficiency of Pd is increased by 10 ∼30 times from single atom catalysts to nanocatalysts. For Pd single atom catalysts, although their activity can be tuned by changing the local structures, the intrinsic activity and number of active sites need to be further improved by engineering the surfaces of supports. For nanosized Pd species, despite the high TOF, the Pd atoms in the bulk structure are not directly participating in the catalytic reaction. Furthermore, this work highlights the importance of increasing the intrinsic activity of individual noble atoms, as well as the homogeneity of their local structures. For Pd/ceria systems reported in this work, our results indicate that from the application point of view, at the current stage, it is not practical to replace Pd nanocatalysts with single atom catalysts for methane combustion.

Pd↗
DOE OSTI2022

Early-Stage Evaluation of Catalyst Manufacturing Cost and Environmental Impact Using CatCost

The costs and environmental impacts of catalyst manufacture are often neglected during early-stage research because of a lack of accessible, standardized tools to assess them. Here we report the key features of CatCost, a free and public estimation tool for the evaluation of catalyst cost. We demonstrate its functionality with a case study of diverse catalysts (ZSM-5, Pt/TiO2 and Mo2C) for the catalytic fast pyrolysis of biomass. We quantified the economic and environmental improvements made by replacing circulating-bed ZSM-5 with more stable, fixed-bed Pt/TiO2 and Mo2C catalysts, while revealing the effects of synthesis methods and production scale on catalyst costs. The manufacture of ZSM-5 had a large processing cost contribution that was strongly scale dependent, whereas the costs of the other catalysts were dominated by raw materials at all scales. Furthermore, while ZSM-5 costs the least per kilogram, the more stable catalysts cost half as much per gallon of fuel.

BIOMASS FUELS,ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

A Full Spectrum of Characterization for Insight into Carbon Speciation and Removal on a Cu/BEA Catalyst During Renewable High-Octane Hydrocarbon Synthesis

Conversion of methanol and dimethyl ether to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Building Electron/Proton Nanohighways for Full Utilization of Water Splitting Catalysts

Low electron/proton conductivities of electrochemical catalysts, especially earth-abundant nonprecious metal catalysts, severely limit their ability to satisfy the triple-phase boundary (TPB) theory, resulting in extremely low catalyst utilization and insufficient efficiency in energy devices. In this study, an innovative electrode design strategy is proposed to build electron/proton transport nanohighways to ensure that the whole electrode meets the TPB, therefore significantly promoting enhance oxygen evolution reactions and catalyst utilizations. It is discovered that easily accessible/tunable mesoporous Au nanolayers (AuNLs) not only increase the electrode conductivity by more than 4000 times but also enable the proton transport through straight mesopores within the Debye length. The catalyst layer design with AuNLs and ultralow catalyst loading (≈0.1 mg cm -2 ) augments reaction sites from 1D to 2D, resulting in an 18-fold improvement in mass activities. Furthermore, using microscale visualization and unique coplanar-electrode electrolyzers, the relationship between the conductivity and the reaction site is revealed, allowing for the discovery of the conductivity-determining and Debye-length-determining regions for water splitting. These findings and strategies provide a novel electrode design (catalyst layer + functional sublayer + ion exchange membrane) with a sufficient electron/proton transport path for high-efficiency electrochemical energy conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning Catalyst Activation and Utilization Via Controlled Electrode Patterning for Low-Loading and High-Efficiency Water Electrolyzers

An anode electrode concept of thin catalyst-coated liquid/gas diffusion layers (CCLGDLs), by integrating Ir catalysts with Ti thin tunable LGDLs with facile electroplating in proton exchange membrane electrolyzer cells (PEMECs), is proposed. The CCLGDL design with only 0.08 mg Ir cm -2 can achieve comparative cell performances to the conventional commercial electrode design, saving ~97% Ir catalyst and augmenting a catalyst utilization to ~24 times. CCLGDLs with regulated patterns enable insight into how pattern morphology impacts reaction kinetics and catalyst utilization in PEMECs. A specially designed two-sided transparent reaction-visible cell assists the in situ visualization of the PEM/electrode reaction interface for the first time. Oxygen gas is observed accumulating at the reaction interface, limiting the active area and increasing the cell impedances. In this work, it is demonstrated that mass transport in PEMECs can be modified by tuning CCLGDL patterns, thus improving the catalyst activation and utilization. The CCLGDL concept promises a future electrode design strategy with a simplified fabrication process and enhanced catalyst utilization. Furthermore, the CCLGDL concept also shows great potential in being a powerful tool for in situ reaction interface research in PEMECs and other energy conversion devices with solid polymer electrolytes.

08 HYDROGEN↗