Search NASA⌕ Search

SEARCH · Search NASA

Results for “centroids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Device for determining relative angular position between a spacecraft and a radiation emitting celestial body

Signals indicative of the relative angular position between a spin stabilized spacecraft, probe, or sounding rocket and a radiation emitting celestial body are derived with a detector including four electrodes for deriving indications of the centroid of the radiation image on the detector. During each spin of the satellite each electrode derives a signal having a first non-zero level while the detector is not illuminated by the radiation, and a sound non-zero level while it is illuminated by the radiation.

Farthing, W. H.↗
NASA NTRS1973

A position-sensitive X-ray detector for the HEAO-A satellite.

A position-sensitive, low-energy proportional counter system is described which will be used on the High-Energy Astronomical Observatory, Mission A, spacecraft. The associated system incorporates the capability to employ pulse-shape discrimination for background rejection and interpolation circuitry to locate the centroid of an X-ray event with an accuracy of approximately one eighth the cathode-wire spacing.

Held, D.↗
NASA NTRS1973

Motion software for a synergistic six-degree-of-freedom motion base

Computer software for the conversion of fixed-base simulations into moving-base simulations utilizing a synergistic six-degree-of-freedom motion simulator has been developed. This software includes an actuator extension transformation, inverse actuator extension transformation, a centroid transformation, and a washout circuit. Particular emphasis is placed upon the washout circuitry as adapted to fit the synergistic motion simulator. The description of the washout circuitry and illustration by means of a sample flight emphasize that translational cue representation may be of good fidelity, but care in the selection of parameters is very necessary, particularly in regard to anomalous rotational cues.

Parrish, R. V.↗
NASA NTRS1973

A Finite-Element Formulation for Subsonic Flows Around Complex Configurations

The problem of potential steady subsonic flow around complex configurations is considered. This problem requires the solution of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements, which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element is assumed to be constant and equal to its value at the centroid of the element. This yields a set of linear algebraic equations. The coefficients of the equation are given by source and doublet integrals over the surface elements. Closed form evaluations of the integrals are presented.

Morino, L.↗
NASA NTRS1973

Radiative lifetimes and band oscillator strengths for metal oxides. II - SiO E 1 Sigma /+/-X 1 Sigma /+/

Use of an electron-beam phase-shift apparatus to obtain the radiative lifetimes for vibrational levels of the SiO E 1 Sigma (+) state. It is found that the radiative lifetimes for the vibrational transitions of the E-X band are independent of the vibrational upper state. The measured phase shifts yield cascade free lifetimes of 10.5 plus or minus 1.1 nsec for v' from 1 to 7. Spectroscopic data from Elander and Lagerqvist (1971) were used to calculate potential curves by the Klein-Dunham procedure, and Franck-Condon factors and r-centroids for the transition were computed.

Elander, N.↗
NASA NTRS1974

A finite-element method for lifting surfaces in steady incompressible subsonic flow

The problem of potential steady subsonic flow for lifting surfaces is considered. This problem requires the solution of an integral equation relating the value of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface is divided into small (quadrilateral hyperboloidal) surface elements, which are described in terms of the Cartesian components of the four corner points. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each element and equal to their values at the centroids of the elements. This yields a set of linear algebraic equations. Numerical results are in good agreement with existing ones.

Morino, L.↗
NASA NTRS1974

A finite element formulation for supersonic flows around complex configurations

The problem of small perturbation potential supersonic flow around complex configurations is considered. This problem requires the solution of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the small perturbation boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element are assumed to be constant and equal to its value at the centroid of the element. This yields a set of linear algebraic equations whose coefficients are given by source and doublet integrals over the surface elements. Closed form evaluations of the integrals are presented.

Morino, L.↗
NASA NTRS1975

Steady and Oscillatory, Subsonic and Supersonic, Aerodynamic Pressure and Generalized Forces for Complex Aircraft Configurations and Applications to Flutter

A general method for analyzing aerodynamic flows around complex configurations is presented. By applying the Green function method, a linear integral equation relating the unknown, small perturbation potential on the surface of the body, to the known downwash is obtained. The surfaces of the aircraft, wake and diaphragm (if necessary) are divided into small quadrilateral elements which are approximated with hyperboloidal surfaces. The potential and its normal derivative are assumed to be constant within each element. This yields a set of linear algebraic equations and the coefficients are evaluated analytically. By using Gaussian elimination method, equations are solved for the potentials at the centroids of elements. The pressure coefficient is evaluated by the finite different method; the lift and moment coefficients are evaluated by numerical integration. Numerical results are presented, and applications to flutter are also included.

Chen, L. T.↗
NASA NTRS1974

A finite-element analysis for steady and oscillatory subsonic flow around complex configurations

The problem of potential subsonic flow around complex configurations is considered. The solution is given of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements, which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element is assumed to be constant and equal to its value at the centroid of the element. The coefficients of the equation are given by source and doublet integrals over the surface elements. Closed form evaluations of the integrals are presented. The results obtained with the above formulation are compared with existing analytical and experimental results.

Chen, L. T.↗
NASA NTRS1974

A finite-element analysis for steady and oscillatory supersonic flows around complex configurations

The problem of small perturbation potential supersonic flow around complex configurations is considered. This problem requires the solution of an integral equation relating the values of the potential on the surface of the body to the values of the normal derivative, which is known from the small perturbation boundary conditions. The surface of the body is divided into small (hyperboloidal quadrilateral) surface elements, sigma sub i, which are described in terms of the Cartesian components of the four corner points. The values of the potential (and its normal derivative) within each element is assumed to be constant and equal to its value at the centroid of the element, and this yields a set of linear algebraic equations. The coefficients of the equation are given by source and doublet integrals over the surface elements, sigma sub i. The results obtained using the above formulation are compared with existing analytical and experimental results.

Morino, L.↗
NASA NTRS1974

Progress in laser ranging to satellites - Achievements and plans

Theoretical and mathematical considerations involved in the design of retroreflectors for the GEOS-C and Timation III laser ranging satellites are described, laser ranging systems used by the Goddard Space Flight Center are reviewed, and planned systems changes are outlined. Equations are derived for the design of a cube corner array on a gravity gradient stabilized satellite in a circular orbit, and the required cube corner for GEOS-C is computed. Use of fixed threshold triggers and electronic and analytic pulse height compensation in present laser ranging systems is discussed. Proposed changes are outlined, including the incorporation of split gate triggers and trackers into the ranging systems and the use of analog and digital centroid measurement techniques. A theoretical consideration of the effects of velocity aberration on the reflected light beam is appended.

Plotkin, H. H.↗
NASA NTRS1975

A finite element analysis of the exact nonlinear formulation of a lifting surface in steady incompressible flow, with the evaluation of the correct wake geometry

The problem of steady incompressible flow for lifting surfaces is considered. An integral equation is solved relating the values of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface and the wake are divided into small quadrilateral surface elements. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each lifting surface element and equal to their values at the centroids of the lifting surface elements. This yields a set of linear algebraic equations. An iteration procedure is used to obtain the wake geometry: the velocities at the corner points of the wake elements are calculated and the wake streamlines are aligned to be parallel to the velocity vector. The procedure is repeated until convergence is attained.

Suciu, E. O.↗
NASA NTRS1976

New convergence criteria for the vortex-lattice models of the leading-edge separation

The convergence criterion for the vortex-lattice technique which deals with delta wings exhibiting significant leading-edge separation was studied. It was shown that one can predict pressure distributions without irregularities which agree fairly well with experimental data (which show some irregularities of their own) by replacing the system of discrete vortex lines with a single concentrated core. This core has a circulation equal to the algebraic sum of the circulations around the discrete lines and is located at the centroid of these lines. Moreover, there is a requirement that the position and strength of the core must converge as the number of elements increases. Because the calculation of the position and strength of the core is much less involved than the calculation of the loads, this approach has the additional desirable feature of requiring less computational time.

Kandil, O. A.↗
NASA NTRS1976

A microprocessor-controlled CCD star tracker

The STELLAR (Star Tracker for Economical Long Life Attitude Reference) utilizes an image sensing Charge-Coupled Device (CCD) operating under microprocessor control. This approach results in a new type of high-accuracy star tracker which can be adapted to a wide variety of different space flight applications through software changes only. The STELLAR determines two-axis star positions by computing the element and the interelement interpolated centroid positions of the star images. As many as 10 stars may be tracked simultaneously, providing significantly increased stability and accuracy. A detailed description of the STELLAR is presented along with measurements of system performance obtained from an operating breadboard model.

Salomon, P. M.↗
NASA NTRS1976

Lidar observations of the stratospheric aerosol - California, October 1972 to March 1974

The paper describes the results of a series of 30 observations of stratospheric aerosol made with a ground-based lidar on the North Pacific Coast during a period relatively uninfluenced by major volcanic penetrations and displaying a relative temporal minimum in particulate content. The objectives were to provide a record of aerosol behavior during this intervolcanic period, to compare this behavior with that revealed by previous studies using a variety of techniques, and to provide comparative data on the stratospheric aerosol by conducting joint lidar and aircraft observations. Determination of scattering profile ratios from lidar signal profiles and analysis of experimental errors are described. Analysis of the data shows that significant temporal variability of the aerosol was observed, probably of nonvolcanic origin. Much of the variability was confined to the 23-30 km height region, above the major peak in scattering ratio. The evidence is that this is not due to influxes of extraterrestrial material. Vertical motions of the centroid of the scattering ratio peak were recorded during the 1973 stratospheric warming, and illustrate the value of lidar's ability to monitor temporal variations of vertical structure.

Russell, P. B.↗
NASA NTRS1976

Aviation safety research and transportation/hazard avoidance and elimination

Data collected by the Scanning Laser Doppler Velocimeter System (SLDVS) was analyzed to determine the feasibility of the SLDVS for monitoring aircraft wake vortices in an airport environment. Data were collected on atmospheric vortices and analyzed. Over 1600 landings were monitored at Kennedy International Airport and by the end of the test period 95 percent of the runs with large aircraft were producing usable results in real time. The transport was determined in real time and post analysis using algorithms which performed centroids on the highest amplitude in the thresholded spectrum. Making use of other parameters of the spectrum, vortex flow fields were studied along with the time histories of peak velocities and amplitudes. The post analysis of the data was accomplished with a CDC-6700 computer using several programs developed for LDV data analysis.

Sonnenschein, C. M.↗
NASA NTRS1977

Dispersed fluorescence observations of the CO/A 1Pi to X 1Sigma+/ transitions from photodissociation of CO2

The spectra of vacuum ultraviolet (vuv) fluorescence resulting from the excitation of CO2 by photons from an intense line emission source at 15 wavelengths in the range 449-955 A were obtained. The vibrational population distributions for the v = 0, 1, and 2 levels of the CO(A 1Pi) fragments were obtained at several incident photon wavelengths from 700 to 923 A. At incident photon wavelengths of 901 and 923, the relative intensities of the CO(A to X) bands were determined, permitting examination of the variation of the electronic transition moment with the r centroid.

Phillips, E.↗