Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

The structural organization of N-methyl-2-pyrrolidone + water mixtures: A densitometry, x-ray diffraction, and molecular dynamics study

A combined approach of molecular dynamics simulations, wide angle X-ray scattering experiments, and density measurements was employed to study the structural properties of N-methyl-2-pyrrolidone (NMP) + water mixtures over the whole concentration range. Remarkably, a very good agreement between computed and experimental densities and diffraction patterns was achieved, especially if the effect of the mixture composition on NMP charges is taken into account. Analysis of the intermolecular organization, as revealed by the radial and spatial distribution functions of relevant solvent atoms, nicely explained the density maximum observed experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

UVUDF: Ultraviolet through near-infrared catalog and photometric redshifts of galaxies in the Hubble Ultra Deep Field

We present photometry and derived redshifts from up to eleven bandpasses for 9927 galaxies in the Hubble Ultra Deep field (UDF), covering an observed wavelength range from the near-ultraviolet (NUV) to the near-infrared (NIR) with Hubble Space Telescope observations. Our Wide Field Camera 3 (WFC3)/UV F225W, F275W, and F336W image mosaics from the ultra-violet UDF (UVUDF) imaging campaign are newly calibrated to correct for charge transfer inefficiency, and use new dark calibrations to minimize background gradients and pattern noise. Our NIR WFC3/IR image mosaics combine the imaging from the UDF09 and UDF12 campaigns with CANDELS data to provide NIR coverage for the entire UDF field of view. We use aperture-matched point-spread function corrected photometry to measure photometric redshifts in the UDF, sampling both the Lyman break and Balmer break of galaxies at z∼0.8–3.4, and one of the breaks over the rest of the redshift range. Our comparison of these results with a compilation of robust spectroscopic redshifts shows an improvement in the galaxy photometric redshifts by a factor of two in scatter and a factor three in outlier fraction (OLF) over previous UDF catalogs. The inclusion of the new NUV data is responsible for a factor of two decrease in the OLF compared to redshifts determined from only the optical and NIR data, and improves the scatter at z<0.5 and at z>2. The panchromatic coverage of the UDF from the NUV through the NIR yields robust photometric redshifts of the UDF, with the lowest OLF available.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1974

Effect of cessation of late-night landing noise on sleep electrophysiology in the home

Simultaneous measurements of noise exposure and sleep electrophysiology were made in homes before and after cessation of nighttime aircraft landing noise. Six people were tested, all of whom had been exposed to intense aircraft noise for at least two years. Noise measurements indicated a large reduction in the hourly noise level during nighttime hours, but no charge during the daytime hours. Sleep measures indicated no dramatic changes in sleep patterns either immediately after a marked change in nocturnal noise exposure or approximately a month thereafter. No strong relationship was observed between noise level and sleep disturbances over the range from 60 to 90 db(A).

Pearsons, K. S.↗
NASA NTRS1992

Multispectral observations of the Jovian aurora

The upper atmospheres of the Earth and the outer planets form a screen on which precipitating charged particles, like the electron beam in a television, trace fleeting, but revealing patterns of visible, ultraviolet, infrared, and x ray emissions that offer valuable clues to processes occurring within the planetary magnetospheres. At Earth, years of in situ measurements, as well as ground based observations, have yielded a picture (still fuzzy) where the interaction of the solar wind with the magnetosphere of the Earth provides a complex path for the storage and release of energy during magnetic substorms; the ultimate manifestation of terrestrial auroral processes. More recent global imaging of substorm events from high above the Earth (greater than 3.5 R(sub e)) by Dynamics Explorer have made a unique contribution towards understanding the global and temporal evolution of such auroral events by providing a morphological perspective and by providing the crucial observational link that allows the separation of spatial and temporal variations inherent in the interpretation of in situ data. A similar role was played by the Hubble Space Telescope (HST) during the recent encounter of Ulysses with Jupiter in helping to define a new paradigm in Jovian auroral physics. The old paradigm portrayed Jupiter's magnetosphere as totally dominated by internal processes (i.e. Io related tori, heavy ions, etc.) where energetic heavy ion precipitation in the inner magnetosphere was solely responsible for the observed auroral phenomena. Ulysses and HST portray a more Earth-like paradigm where electron acceleration in the outer magnetosphere near the boundary with the solar wind plays a distinct role in the formation of auroral hot spots, yet energetic heavy ions also enter into the picture (similar to the role of the energetic ions from the terrestrial ring current during magnetic substorms). These heavy ions as a result of excitation during their transit through the atmosphere produce the x ray emissions observed in Roentgensatellit (ROSAT) x ray energy spectra.

Source record↗
NASA NTRSDate not supplied

Modeling Space-Radiation Induced Chromosome Aberrations

Exposure to ionizing radiation is identified as one of the main hazards of space flight. Galactic cosmic rays (GCRs) are composed of energetic protons (87%), helium nuclei (12%) and high-charge and energy (HZE) ions. At the cellular scale, HZE ions have a pattern of energy deposition that depends on the ion linear energy transfer (LET), with high LET ions favoring the formation of complex DNA damages that induce chromosome aberrations (CAs). Understanding how physical (e.g., ion type and energy) and biological (e.g., cell type) parameters impact CA formation is required to assess space radiation risks such as carcinogenesis. The Monte Carlo tool RITCARD/RITRACKS [1,2] developed by NASA allows simulation of the transport of HZE ions and subsequent energy deposition at the cellular scale and models the creation of DNA double strand breaks (DSBs), DNA repair and formation of CAs. We used this radiation transport code to further understand how radiation quality and cell size affects CA formation.

Floriane Poignant↗
DOE OSTI2017

Local optical control of ferromagnetism and chemical potential in a topological insulator

Many proposed experiments involving topological insulators (TIs) require spatial control over time-reversal symmetry and chemical potential. We demonstrate reconfigurable micron-scale optical control of both magnetization (which breaks time-reversal symmetry) and chemical potential in ferromagnetic thin films of Cr-(Bi,Sb) 2 Te 3 grown on SrTiO 3 . By optically modulating the coercivity of the films, we write and erase arbitrary patterns in their remanent magnetization, which we then image with Kerr microscopy. Additionally, by optically manipulating a space charge layer in the underlying SrTiO 3 substrates, we control the local chemical potential of the films. This optical gating effect allows us to write and erase p-n junctions in the films, which we study with photocurrent microscopy. Both effects are persistent and may be patterned and imaged independently on a few-micron scale. As a result, dynamic optical control over both magnetization and chemical potential of a TI may be useful in efforts to understand and control the edge states predicted at magnetic domain walls in quantum anomalous Hall insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Analyzing battery electric vehicle feasibility from taxi travel patterns: The case study of New York City, USA

Electric taxis have the potential to improve urban air quality and save driver’s energy expenditure. Although battery electric vehicles (BEVs) have drawbacks such as the limited range and charging inconvenience, technological progress has been presenting promising potential for electric taxis. Many cities around the world including New York City, USA are taking initiatives to replace gasoline taxis with plug-in electric vehicles. This study extracts ten variables from the trip data of the New York City yellow taxis to represent their spatial-temporal travel patterns in terms of driver-shift, travel demand and dwell, and examines the implications of these driving patterns on the BEV taxi feasibility. The BEV feasibility of a taxi is quantified as the percentage of occupied trips that can be completed by BEVs of a given driving range during a year. It is found that the currently deployed 280 public charging stations in New York City are far from sufficient to support a large BEV taxi fleet. However, adding merely 372 new charging stations at various locations where taxis frequently dwell can potentially make BEVs with 200- and 300-mile ranges feasible for more than half of the taxi fleet. Finally, the results also show that taxis with certain characteristics are more suitable for switching to BEV-200 or BEV-300, such as fewer daily shifts, fewer drivers assigned to the taxi, shorter daily driving distance, fewer daily dwells but longer dwelling time, and higher likelihood to dwell at the borough of Manhattan.

25 ENERGY STORAGE↗
DOE OSTI2020

Selective-Area Remote Epitaxy of ZnO Microrods Using Multilayer–Monolayer-Patterned Graphene for Transferable and Flexible Device Fabrications

Here, selective-area remote epitaxy (SA-REpi) is demonstrated for fabricating mechanically releasable position-controlled ZnO microrod (MR) arrays from donor wafers in an arrayed form. Intaglio-patterned graphene, consisting of basal single-layer graphene (SLG) overlayered with multilayer graphene (MLG) patterned with perforated holes, is transferred onto a GaN/Al 2 O 3 wafer on which the hydrothermal synthesis is performed for growing ZnO MRs. The basal SLG area exposed through the MLG pattern yields ZnO MRs, whereas the MLG plateau inhibits the growth. The noncovalent remote epitaxial heterointerface enables the release of the MR overlayer in the arrayed form, and the original source wafer is refurbished for reproducibly repeating the SA-REpi. Density-functional theory calculations suggest that localized surface charge density is induced on the surface of SLG by the underlying GaN across ultrathin SLG, which possibly provides a driving force for precursor adatoms and the following remote epitaxy of ZnO. In contrast, the induction of the charge density redistribution does not clearly occur through MLG; so, that keeps the surface of MLG nearly charge-neutral. The diameter and spacing of ZnO MRs are controlled in a designed way by changing the pattern geometries. High-resolution scanning transmission electron microscopy reveals the remote heteroepitaxial relationship at an atomic level. The remote epitaxy is expected to provide an ideal platform to transfer the addressable spatial arrays of nano- or micro-architecture semiconductor components to arbitrary target surfaces directly after the growth without the assembly procedures.

36 MATERIALS SCIENCE↗
DOE OSTI2015

What Use Patterns Were Observed for PEV Drivers at Publicly Accessible AC Level 2 EVSE Sites?

The EV Project deployed over 4,000 ACL2 EVSE for drivers to charge their plug-in electric vehicle (PEV) when away-from-home. The vast majority of these EVSE stations were installed to be available to all PEV drivers at publicly accessible locations. Some were also deployed for use at workplaces and fleets. This paper examines only the use patterns of PEV drivers using the EVSE intended to be publicly accessible.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2014

Quantum oscillations in the surface excitations of ultrathin Mg(0001) films

Using reflection electron energy-loss spectroscopy (EELS), we unveil a direct correlation between the thickness-dependent oscillatory charge spilling of quantum well states in epitaxial Mg(0001) films, and the linear dispersion coefficient of the monopole surface plasmon mode. In addition, the spectral intensities of the photoemission threshold excitation and multipole surface plasmon mode follow a similar but mutually anticorrelated quantum oscillatory pattern. We attribute these oscillatory features of the collective response to quantum oscillations in the ground-state charge-density profile, specifically its decay into the vacuum. Because the decay lengths can be controlled through the quantum-size effects and appropriate choice of the quantum-size boundary conditions, these insights are expected to be significant in the design of quantum-sized plasmonic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

The response of plasma density to breaking inertial gravity wave in the lower regions of ionosphere

We present a three-dimensional numerical study for the E and lower F region ionosphere coupled with the neutral atmosphere dynamics. This model is developed based on a previous ionospheric model that examines the transport patterns of plasma density given a prescribed neutral atmospheric flow. Inclusion of neutral dynamics in the model allows us to examine the charge-neutral interactions over the full evolution cycle of an inertial gravity wave when the background flow spins up from rest, saturates and eventually breaks. Using Lagrangian analyses, we show the mixing patterns of the ionospheric responses and the formation of ionospheric layers. The corresponding plasma density in this flow develops complex wave structures and small-scale patches during the gravity wave breaking event.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The role of substrate on stabilizing new phases of two-dimensional tin

In this work, we investigate the role of substrates in determining the morphologies and electronic structures of two-dimensional (2D) Sn. Here, we use Ir(111) and 2D hexagonal boron nitride (h-BN) predeposited on Ir(111) as substrates. The latter contains Moiré patterns with varying binding strength between h-BN and metal. Using scanning tunneling microscopy and first-principles calculations, we reveal the distinct morphologies of 2D Sn on different substrates. Of particular interest, we discover a new √7 × √7 Sn phase, originating from the local charge transfer with metal beneath the “decoupling” h-BN monolayer at the strongly interacting Moiré region. To the best of our knowledge, this work demonstrates, for the first time via combined experimental and theoretical approach, that new 2D Sn phases can be achieved using Moiré patterns on h-BN/metal. This finding should be instrumental in the development of 2D-based topological materials.

36 MATERIALS SCIENCE↗
DOE OSTI2017

VIPRAM_L1CMS: a 2-Tier 3D Architecture for Pattern Recognition for Track Finding

In HEP tracking trigger applications, flagging an individual detector hit is not important. Rather, the path of a charged particle through many detector layers is what must be found. Moreover, given the increased luminosity projected for future LHC experiments, this type of track finding will be required within the Level 1 Trigger system. This means that future LHC experiments require not just a chip capable of high-speed track finding but also one with a high-speed readout architecture. VIPRAM_L1CMS is 2-Tier Vertically Integrated chip designed to fulfill these requirements. It is a complete pipelined Pattern Recognition Associative Memory (PRAM) architecture including pattern recognition, result sparsification, and readout for Level 1 trigger applications in CMS with 15-bit wide detector addresses and eight detector layers included in the track finding. Pattern recognition is based on classic Content Addressable Memories with a Current Race Scheme to reduce timing complexity and a 4-bit Selective Precharge to minimize power consumption. VIPRAM_L1CMS uses a pipelined set of priority-encoded binary readout structures to sparsify and readout active road flags at frequencies of at least 100MHz. VIPRAM_L1CMS is designed to work directly with the Pulsar2b Architecture.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Modeling photovoltaic performance in periodic patterned colloidal quantum dot solar cells

Colloidal quantum dot (CQD) solar cells have attracted tremendous attention mostly due to their wide absorption spectrum window and potentially low processability cost. The ultimate efficiency of CQD solar cells is highly limited by their high trap state density. Here in this paper we show that the overall device power conversion efficiency could be improved by employing photonic structures that enhance both charge generation and collection efficiencies. By employing a two-dimensional numerical model, we have calculated the characteristics of patterned CQD solar cells based of a simple grating structure. Our calculation predicts a power conversion efficiency as high as 11.2%, with a short circuit current density of 35.2 mA/cm 2 , a value nearly 1.5 times larger than the conventional flat design, showing the great potential value of patterned quantum dot solar cells.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Uncontrolled Electric Vehicle Charging Impacts on Distribution Electric Power Systems with Primarily Residential, Commercial or Industrial Loads

An increase in Electric Vehicles (EV) will result in higher demands on the distribution electric power systems (EPS) which may result in thermal line overloading and low voltage violations. To understand the impact, this work simulates two EV charging scenarios (home- and work-dominant) under potential 2030 EV adoption levels on 10 actual distribution feeders that support residential, commercial, and industrial loads. The simulations include actual driving patterns of existing (non-EV) vehicles taken from global positioning system (GPS) data. The GPS driving behaviors, which explain the spatial and temporal EV charging demands, provide information on each vehicles travel distance, dwell locations, and dwell durations. Then, the EPS simulations incorporate the EV charging demands to calculate the power flow across the feeder. Simulation results show that voltage impacts are modest (less than 0.01 p.u.), likely due to robust feeder designs and the models only represent the high-voltage (“primary”) system components. Line loading impacts are more noticeable, with a maximum increase of about 15%. Additionally, the feeder peak load times experience a slight shift for residential and mixed feeders (≈1 h), not at all for the industrial, and 8 h for the commercial feeder.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1990

A self-consistent two-dimensional resistive fluid theory of field-aligned potential structures including charge separation and magnetic and velocity shear

A self-consistent two-fluid theory that includes the magnetic field and shear patterns is developed to model stationary electrostatic structures with field-aligned potential drops. Shear flow is also included in the theory since this seems to be a prominent feature of the structures of interest. In addition, Ohmic dissipation, a Hall term, and pressure gradients in a generalized Ohm's law, modified for cases without quasi-neutrality, are included. In the analytic theory, the electrostatic force is balanced by field-aligned pressure gradients (i.e., thermal effects in the direction of the magnetic field) and by pressure gradients and magnetic stresses in the perpendicular direction. Within this theory, simple examples of applications are presented to demonstrate the kind of solutions resulting from the model. The results show how the effects of charge separation and shear in the magnetic field and the velocity can be combined to form self-consistent structures such as are found to exist above the aurora, suggested also in association with solar flares.

Hesse, Michael↗
DOE OSTI2019

Evidence of a purely electronic two-dimensional lattice at the interface of TMD/Bi 2 Se 3 heterostructures

When 2D materials are vertically stacked, new physics emerges from interlayer orbital interactions and charge transfer modulated by the additional periodicity of interlayer atomic registry (moiré superlattice). Surprisingly, relatively little is known regarding the real-space distribution of the transferred charges within this framework. In this paper we provide the first experimental indications of a real-space, non-atomic lattice formed by interlayer coupling induced charge redistribution in vertically stacked Bi 2 Se 3 /transition metal dichalcogenide (TMD) 2D heterostructures. Robust enough to scatter 200 keV electron beams, this non-atomic lattice generates selected area diffraction patterns that correspond excellently with simulated patterns from moiré superlattices of the parent crystals suggesting their location at sites of high interlayer atomic registry. Density functional theory (DFT) predicts concentrated charge pools reside in the interlayer region, located at sites of high nearest-neighbor atomic registry, suggesting the non-atomic lattices are standalone, reside in the interlayer region, and are purely electronic.

2D materials↗