Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Cloud Thickness from Offbeam Returns (THOR) Validation Campaign on NASA's P3B Over the ARM/SGP

Physical thickness of a cloud layer, sometimes multiple cloud layers, is a crucial controller of solar heating of the Earth- atmosphere system, which drives the convective processes that produce storm systems. Yet clouds of average optical thickness are opaque to conventional lidar, so their thickness is well estimated only by combining a lidar above and another below cloud, or a radar and lidar on the same side, dual facilities not widely available. Here we report initial observations of a new airborne multiple field of view lidar, capable of determining physical thickness of cloud layers from time signatures of off-beam returns from a I kHz micropulse lidar at 540 rim. For a single layer, the time delay of light returning from the outer diffuse halo of light surrounding the beam entry point, relative to the time delay at beam center, determines the cloud physical thickness. The delay combined with the pulse stretch gives the optical thickness. This halo method requires cloud optical thickness exceeding 2, and improves with cloud thickness, thus complimenting conventional lidar, which cannot penetrate thick clouds. Results are presented from March 25, 2002, when THOR flew a butterfly pattern over the ARM site at 8.3 km, above a thin ice cloud at 5 km, and a thick boundary-layer stratus deck with top at 1.3 km, as shown by THOR channel 1, and a base at about 0.3 km as shown by the ground-based MPL. Additional information is included in the original extended abstract.

Cahalan, R. F.↗

Flight Camera for Photographing Cloud Droplets in Natural Suspension in the Atmosphere

A camera designed for use in flight has been developed by the NACA Lewis laboratory t o photograph cloud droplets in their natural suspension in the atmosphere. A magnification of 32 times is employed to distinguish for measurement purposes all sizes of droplets greater than 5 microns in diameter. Photographs can be taken at flight speeds up to 150 miles per hour at 5-second intervals, A field area of 0.025 square inch is photographed on 7-inch-width roll film accommodating 40 exposures on an 18-foot length. Flight tests conducted in cumulus clouds have shown that approximate droplet-size distribution studies can be obtained and that a studies of the microstructure and physics of clouds can be made with the camera.

Mccullough, Stuart↗

A Neural Network Parametrization of Volumetric Cloud Fraction Profiles Using Satellite Observations and MERRA-2 Reanalysis Meteorological Data

Clouds play a crucial role in regulating the hydrologic cycle and Earth's radiative energy budget, yet they are often poorly represented in global climate models (GCMs). This study applies deep machine learning techniques to develop a physical parameterization of volumetric cloud fraction (VCF), the fraction of a 3-D grid volume occupied by clouds using satellite lidar-radar measurements. The neural network (NN) captures the complicated relationships between observed VCF profiles and collocated meteorological variables from MERRA-2 reanalysis data. Our results show that the NN model, particularly a sequence-to-sequence long short-term memory (LSTM) network with a sixfactor loss function, effectively learns the underlying cloud physical processes. The NN model outperforms MERRA-2 reanalysis in representing low-level clouds in tropical and subtropical regions and low- and middle-level clouds over midlatitude storm-track regions, and also improves VCF histograms. These improvements are reflected in the vertical distributions of zonally, meridionally, and globally averaged VCFs, geographic distributions of low-, middle-, and high-level clouds, and seasonal variations in monthly-mean VCF. Furthermore, the NN predictions effectively capture the El Niño-Southern Oscillation (ENSO) effects and other interannual variations. The NN parameterization is further evaluated through a sensitivity analysis, in which a single predictor is perturbed at a time. This reveals that relative humidity (RH) is the dominant factor influencing variations in globally averaged VCF at low and middle altitudes, followed by temperature. At higher altitudes, temperature becomes the primary driver of VCF through its effect on RH. Changes in wind components had minimal impact on globally averaged VCF.

Shan Zeng↗

Application of cellular automata approach for cloud simulation and rendering

Current techniques for creating clouds in games and other real time applications produce static, homogenous clouds. These clouds, while viable for real time applications, do not exhibit an organic feel that clouds in nature exhibit. These clouds, when viewed over a time period, were able to deform their initial shape and move in a more organic and dynamic way. With cloud shape technology we should be able in the future to extend to create even more cloud shapes in real time with more forces. Clouds are an essential part of any computer model of a landscape or an animation of an outdoor scene. A realistic animation of clouds is also important for creating scenes for flight simulators, movies, games, and other. Our goal was to create a realistic animation of clouds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Diurnal Cycle in TOGA-COARE: Regional Scale Model Simulations

The diurnal variation of precipitation processes over the tropics is a well-known phenomenon and has been studied using surface rainfall data, radar reflectivity data, and satellite-derived cloudiness and precipitation. Recently, analyzed observations from Tropical Oceans and Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA COARE) in the tropical western Pacific ocean to study the relevant mechanisms producing diurnal variation of precipitation. They found that the diurnal Sea surface temperature (SST) cycle is important for afternoon showers in the undisturbed periods and diurnal radiative processes for nocturnal rainfall. Cloud resolving models (CRMS) have been used to determine the mechanisms associated with diurnal variation of precipitating processes. CRMs allow explicit cloud-radiation and air-sea interactive processes. However, CRMs can be only used for idealized simulations (i.e., no feedback between clouds and their embedded large-scale environments; cyclic lateral boundary conditions and idealized initial conditions). In this study, the Penn State/NCAR Mesoscale Model (MM5) with improved physics (i.e., cloud microphysics, radiation, land-soil-vegetation-surface processes, and TOGA COARE flux scheme) and a multiple level nesting technique (covers the TOGA COARE LSA/IFA with a 54 km grid and can nest down to 18, 6 and possibly even 2 km) will be adopted for studying the diurnal variations of rainfall. We will examine precipitation processes over open ocean and over land. We will also perform sensitivity tests to determine how the radiative forcing and diurnal SST cycle affects the development of convection.

Tao, W.-K.↗

Advancements in the Representation of Cloud-Aerosol Microphysics in the GEOS-5 AGCM

Despite numerous challenges, the physical parameterization of cloud-aerosol interactions in atmospheric GCMs has become a top priority for advancement because of our need to simulate and understand past, current, and future indirect effects of aerosols on clouds. The challenges stem from the involvement of wide range of cloud-scale dynamics and aerosol activation physical processes. Cloud dynamics modulate cloud areal extent and condensate, while aerosol activation depends on aerosol mass load, size distribution, internal mixing state, and nucleating properties, and ultimately determines cloud optical properties via particle sizes. Both macro- and micro-scale processes are obviously important for cloud-radiation interactions. We will present the main features of cloud microphysical properties in the GEOS- 5 Atmospheric GCM (AGCM) as simulated by the McRAS-AC (Microphysics of Clouds with Relaxed Arakawa-Schubert and Aerosol-Cloud interaction) scheme. McRAS-AC uses Fountoukis and Nenes (2005) aerosol activation for liquid clouds, and has an option for either Liu and Penner (2005) or Barahona and Nenes (2008, 2009) aerosol activation for ice clouds. Aerosol loading (on-line or climatological) comes from GOCART, with an assumed log-normal size distribution. Other features of McRAS-AC are level-by-level cloud-scale thermodynamics, and Seifert-Beheng (2001)-type precipitation microphysics, particularly from moist convection. Results from Single-Column Model simulations will be shown to demonstrate how cloud radiative properties, lifetimes, and precipitation are influenced by different parameterization assumptions. Corresponding fields from year-long simulations of the full AGCM will also be presented with geographical distributions of cloud effective particle sizes compared to satellite retrievals. While the primary emphasis will be on current climate, simulation results with perturbed aerosol loadings will also be shown to expose the radiative sensitivity of the microphysical parameterization.

Lee, D.↗

Cloud feedback studies with a physics grid

During this project the investigators implemented a fully parallel version of dual-grid approach in main frame code ICON, implemented a fully conservative first-order interpolation scheme for horizontal remapping, integrated UCLA-LES micro-scale model into ICON to run parallely in selected columns, and did cloud feedback studies on aqua-planet setup to evaluate the classical parameterization on a small domain. The micro-scale model may be run in parallel with the classical parameterization, or it may be run on a "physics grid" independent of the dynamics grid.

54 ENVIRONMENTAL SCIENCES↗

Raman Lidar Measurements of Water Vapor and Cirrus Clouds During The Passage of Hurricane Bonnie

The NASA/GSFC Scanning Raman Lidar (SRL) was stationed on Andros Island in the Bahamas during August - September, 1998 as a part of the third Convection and Moisture Experiment (CAMEX-3) which focussed on hurricane development and tracking. During the period August 21 - 24, hurricane Bonnie passed near Andros Island and influenced the water vapor and cirrus cloud measurements acquired by the SRL. Two drying signatures related to the hurricane were recorded by the SRL and other sensors. Cirrus cloud optical depths (at 351 nm) were also measured during this period. Optical depth values ranged from less than 0.01 to 1.5. The influence of multiple scattering on these optical depth measurements was studied. A correction technique is presented which minimizes the influences of multiple scattering and derives information about cirrus cloud optical and physical properties. The UV/IR cirrus cloud optical depth ratio was estimated based on a comparison of lidar and GOES measurements. Simple radiative transfer model calculations compared with GOES satellite brightness temperatures indicate that satellite radiances are significantly affected by the presence of cirrus clouds if IR optical depths are approximately 0.005 or greater. Using the ISCCP detection threshold for cirrus clouds on the GOES data presented here, a high bias of up to 40% in the GOES precipitable water retrieval was found.

Whiteman, D. N.↗

CALIPSO: Global Aerosol and Cloud Observations from Lidar and Passive Instruments

CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Spaceborne Observations) is an approved satellite mission being developed through collaboration between NASA and the French space agency CNES. The mission is scheduled for launch in 2004 and will operate for 3 years as part of a five-satellite formation called the Aqua constellation. This constellation will provide a unique data set on aerosol and cloud optical and physical properties and aerosol-cloud interactions that will substantially increase our understanding of the climate system and the potential for climate change.

Poole, L. R.↗

Use of physics to improve solar forecast: Part III, impacts of different cloud types

Cloud-type impacts present a great challenge to solar forecasting due to diverse and complex cloud-radiation interactions. This third part of our paper sequence seeks to address this challenge by quantifying the forecast accuracies under eight cloud types: cumulus (Cu), stratified clouds (St), altocumulus (Ac), altostratus (As), cirrostratus/anvil (Cr), cirrus (Ci), congestus (Co), deep convective clouds (Dc) across four physics-informed persistence models reported in Part I. To generalize the cloud impacts, the eight cloud types are further grouped into three cloud categories based on their common features: weak convective clouds, stratiform clouds, and strong convective clouds. Here, the decade-long (2001 ~ 2014) collocated measurements of irradiances and cloud types at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program South Great Plain (SGP) Central Facility site are used for model evaluation. Results reveal a clear performance hierarchy for global horizontal irradiance (GHI) and direct normal irradiance (DNI): best for weak convective clouds and cirrus, intermediate for stratiform clouds, and worst for strong convective clouds. Performance for diffuse horizontal irradiance (DHI) is less influenced by cloud types. Cloud albedo dominates all three irradiances for Dc, while both cloud albedo and cloud fraction are influential for other cloud types. A 12 %~33 % improvement in accuracy at 6-hour lead time compared to the benchmark smart model confirms the effectiveness of incorporating physics into the models for various cloud types; further improvements are expected by directly integrating cloud type information into forecasting models by modifying the physical formulation of cloud-radiation interaction, and/or using more advanced machine learning models.

14 SOLAR ENERGY↗

The clouds of Venus

The physical and chemical properties of the clouds of Venus are reviewed, with special emphasis on data that are related to cloud dynamics. None of the currently-popular interpretations of cloud phenomena on Venus is consistent with all the data. Either a considerable fraction of the observational evidence is faulty or has been misinterpreted, or the clouds of Venus are much more complex than the current simplistic models. Several lines of attack are suggested to resolve some of the contradictions. A sound understanding of the clouds appears to be several years in the future.

Young, A. T.↗

The clouds of Venus

The physical and chemical properties of the clouds of Venus are reviewed with special emphasis on data that are related to cloud dynamics. None of the currently popular interpretations of cloud phenomena on Venus is consistent with all the data. Either a considerable fraction of the observational evidence is faulty or has been misinterpreted, or the clouds of Venus are much more complex than the current simplistic models. Several lines of attack are suggested to resolve some of the contradictions.

Young, A. T.↗

A possible connection between massive fermions and dark energy

In a dense cloud of massive fermions interacting by exchange of a light scalar field, the effective mass of the fermion can become negligibly small. As the cloud expands, the effective mass and the total energy density eventually increase with decreasing density. In this regime, the pressure-density relation can approximate that required for dark energy. They apply this phenomenon to the expansion of the Universe with a very light scalar field and infer relations between the parameters available and cosmological observations. Majorana neutrinos at a mass that may have been recently determined, and fermions such as the Lightest Supersymmetric Particle (LSP) may both be consistent with current observations of dark energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cloud Properties Derived from Surface-Based Near-Infrared Spectral Transmission

Surface based near-infrared cloud spectral transmission measurements from a recent precipitation/cloud physics field study are used to determine cloud physical properties and relate them to other remote sensing and in situ measurements. Asymptotic formulae provide an effective means of closely approximating the qualitative and quantitative behavior of transmission computed by more laborious detailed methods. Relationships derived from asymptotic formulae are applied to measured transmission spectra to test objectively the internal consistency of data sets acquired during the field program and they confirmed the quality of the measurements. These relationships appear to be very useful in themselves, not merely as a quality control measure, but also a potentially valuable remote-sensing technique in its own right. Additional benefits from this analysis have been the separation of condensed water (cloud) transmission and water vapor transmission and the development of a method to derive cloud liquid water content.

Pilewskie, Peter↗

THE LOCAL DUST FOREGROUNDS IN THE MICROWAVE SKY. I. THERMAL EMISSION SPECTRA

Analyses of the cosmic microwave background (CMB) radiation maps made by the Wilkinson Microwave Anisotropy Probe (WMAP) have revealed anomalies not predicted by the standard inflationary cosmology. In particular, the power of the quadrupole moment of the CMB fluctuations is remarkably low, and the quadrupole and octopole moments are aligned mutually and with the geometry of the solar system. It has been suggested in the literature that microwave sky pollution by an unidentified dust cloud in the vicinity of the solar system may be the cause for these anomalies. In this paper, we simulate the thermal emission by clouds of spherical homogeneous particles of several materials. Spectral constraints from the WMAP multi-wavelength data and earlier infrared observations on the hypothetical dust cloud are used to determine the dust cloud's physical characteristics. In order for its emissivity to demonstrate a flat, CMB-like wavelength dependence over the WMAP wavelengths (3 through 14 mm), and to be invisible in the infrared light, its particles must be macroscopic. Silicate spheres of several millimeters in size and carbonaceous particles an order of magnitude smaller will suffice. According to our estimates of the abundance of such particles in the zodiacal cloud and trans-Neptunian belt, yielding the optical depths of the order of 10{sup -7} for each cloud, the solar system dust can well contribute 10 muK (within an order of magnitude) in the microwaves. This is not only intriguingly close to the magnitude of the anomalies (about 30 muK), but also alarmingly above the presently believed magnitude of systematic biases of the WMAP results (below 5 muK) and, to an even greater degree, of the future missions with higher sensitivities, e.g., Planck.

79 ASTRONOMY AND ASTROPHYSICS↗

Fusion of Surface Ceilometer Data and Satellite Cloud Retrievals in 2D Mesh Interpolating Model with Clustering

For accurate cloud ceiling information, a data fusion approach is proposed that utilizes satellite data to extend surface station information to much wider areas. Cloud base height (CBH) retrieved from satellite observations provides for much larger spatial coverage and higher resolution. The direct comparison of GOES-16 CBH with surface station ceiling yields a local bias that has to be corrected for in the initial GOES-16 cloud base information. This sparsely sampled bias correction presents an irregular 2D mesh of control points, which is then interpolated by constructing a continuous smooth field using polyharmonic splines. The influence of remote stations is restricted by grouping the control points into clusters depending on an effective distance. This cluster-based approach allows for constructing separate spline surfaces corresponding to physically different clouds. The obtained continuous bias correction function is then applied to the entire GOES-16 pixel level CBH except for areas far away from surface stations in data sparse regions such as offshore. The described method is currently being tested using daytime-only observations over the central and eastern United States. Overall, this approach has potential to provide more accurate, high spatial resolution cloud ceiling information for the aviation community.

Khlopenkov, Konstantin↗