SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A general construction for finite-state (FS) codes is applied to some well-known block codes. Subcodes of the (24,12) Golay code are used to generate two optimal FS codes with d sub free = 12 and 16. A partition of the (16,8) Nordstrom-Robinson code yields a d sub free = 10 FS code. Simulation results are shown and decoding algorithms are briefly discussed.
A software package which emulates the Tektronics PLOT10 Graphics package on Hewlett-Packard 9000 Series 200/300 computers is described. The Software is written in HP Rocky Mountain BASIC and can be run under BASIC revisions 3.0 and 4.0. Although this subroutine library emulates a subset of PLOT10, several subroutines have been added which enhance basic plot generation. Example codes using PLOT300 and descriptions of the subroutines are included in the text.
A method by which a simple equivalent faired body can be designed to replace a more complex body with flowing inlets has been demonstrated for supersonic flow. An analytically defined, geometrically simple faired inlet forebody has been designed using a linear potential code to generate flow perturbations equivalent to those produced by a much more complex forebody with inlets. An equivalent forebody wind-tunnel model was fabricated and a test was conducted in NASA Langley Research Center's Unitary Plan Wind Tunnel. The test Mach number range was 1.60 to 2.16 for angles of attack of -4 to 16 deg. Test results indicate that, for the purposes considered here, the equivalent forebody simulates the original flowfield disturbances to an acceptable degree of accuracy.
Instrument errors made negligible. For each integration interval, both delay and rate of change of delay initialized to small fraction of chip - for example, to order of 10 to the negative 7th power - thereby making feedback control and extraction of delay highly accurate and flexible. With appropriate selection of sampling rate relative to chip rate, commensurability errors reduced to extremely small levels. In Global Positioning System (GPS) receiver, pseudorandom code sequence generated by simple digital logic incorporating effects of time, delay, and rate of change of delay. Flexibility in starting time and sum interval very useful in aligning correlation interval with beginnings and endings of data bits.
After completing a small Ada pilot project (OCC simulator) for the Multi Satellite Operations Control Center (MSOCC) at Goddard last year, the use of Ada to develop OCCs was recommended. To help MSOCC transition toward Ada, a suite of about 100 evaluation programs was developed which can be used to assess Ada compilers. These programs compare the overall quality of the compilation system, compare the relative efficiencies of the compilers and the environments in which they work, and compare the size and execution speed of generated machine code. Another goal of the benchmark software was to provide MSOCC system developers with rough timing estimates for the purpose of predicting performance of future systems written in Ada.
Prototype digital controller intended for use in 406-MHz emergency beacon. Undergoing development according to international specifications, 406-MHz emergency beacon system includes satellites providing worldwide monitoring of beacons, with Doppler tracking to locate each beacon within 5 km. Controller turns beacon on and off and generates binary codes identifying source (e.g., ship, aircraft, person, or vehicle on land). Codes transmitted by phase modulation. Knowing code, monitor attempts to communicate with user, monitor uses code information to dispatch rescue team appropriate to type and locations of carrier.
The reuse activities at Langley have centered on the development of the Eli System by SPS. The development of a computer systems design environment at Langley was described as a target application for the future Eli system. This environment combines software development tools with an architecture design and analysis tool. Specifically, a Computer-Aided Software Engineering (CASE) system, under development at Charles Stark Draper Laboratory for Langley, is being used to generate Ada code for use in architecture functional simulations using the Architecture Design and Assessment System (ADAS). The Eli system will be included in this tool set and will be used to organize and promote reuse of the functional simulation code modules.
A unified space/time marching method was used to solve the Euler and Reynolds-averaged Navier-Stokes equations for supersonic flow past an Advanced Short Take-off and Vertical Landing (ASTOVL) aircraft configuration. Lift and drag values obtained from the computations compare well with wind tunnel measurements. The entire calculation procedure is described starting from the geometry to final postprocessing for lift and drag. The intermediate steps include conversion from IGES to the patch specification needed for the CFD code, grid generation, and solution procedure. The calculations demonstrate the capability of the method used to accurately predict design parameters such as lift and drag for very complex aircraft configurations.
A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.
This volume (4 of 4) contains the description, structured flow charts, prints of the graphical displays, and source code to generate the displays for the AMPS graphical status system. The function of these displays is to present to the manager of the AMPS system a graphical status display with the hot boxes that allow the manager to get more detailed status on selected portions of the AMPS system. The development of the graphical displays is divided into two processes; the creation of the screen images and storage of them in files on the computer, and the running of the status program which uses the screen images.
The advancing front technique is being used to develop a code to generate grids around complex 3-D configurations for use in computing the invisid flow solutions by the Euler equations. By the advancing front technique points are introduced concurrently with the connectivity information so that a separate library is not required. The generation of a 3-D grid is accomplished in several steps. First the boundaries of the domain to be gridded must be described by two-, three- or four-sided surface patches. Next, a background mesh is required to control the grid spacing and stretching throughout the domain. This coarse tetrahedral grid is not required to conform to any of the boundaries. Next, each of the patches is mapped to 2-D, triangulated by the advancing front technique and mapped back to 3-D. These triangles form the initial front for the generation of the final tetrahedral mesh.
The control point form (CPF) provides explicit control of physical grid shape and grid spacing through the movement of the control points. The control point array, called a control net, is a space grid type arrangement of locations in physical space with an index for each direction. As an algebraic method CPF is efficient and works well with interactive computer graphics. A family of menu-driven, interactive grid-generation computer codes (TURBO) is being developed by using CPF. Key features of TurboI (a TURBO member) are discussed and typical results are presented. TurboI runs on any IRIS 4D series workstation.
A great diversity is known to exist in the coma morphology of comets. In particular, some comets show much structural detail in their heads (such as jets, halos, fans, plumes, streamers), while others have completely structureless comas. Obvious questions arise as to why is this so and what does the presence or absence of features tell us about the emission processes on cometary nuclei. In an effort to investigate these problems, a computer code that generates synthetic images of dust comets was modified by introducing random perturbations into motions of ejected particles. It is noted that the introduction of perturbations has made the computer generated images simulate the appearance of comets quite faithfully and that by increasing the perturbations beyond a certain limit it has been possible to erase the coma morphology diagnostic of the details of the ejection process. It is proposed that the degree of collimation of an ejecta flow from discrete active sources on the nucleus surface and possible emissions of dust coma. Molecules of comet gases that radiate in the spectral region employed (and whose velocity distribution is much more chaotic than that of dust particles) and limited atmospheric seeing likewise contribute to blurring structural detail in ground-based imaging observation of comets. The absence of discrete features in the coma does no means imply the absence of localized sources of activity on the nucleus.
The UV photospheric spectra of cool giants are modeled analytically to facilitate the identification of UV spectral features and aid in the measurement of actual chromospheric flux at different wavelengths. Atomic line data derived experimentally and semiempirically are used with LTE model atmospheres by means of the SYNTHE FORTRAN code to generate the synthetic spectra. Surface flux spectra are determined and fitted to the absorption features of observed IUE high resolution spectra, and the modeled results are compared to the observed spectra of the cool giants Arcturus and the cooler Gamma Crucis. It is shown that the synthetic spectra can be produced for the stars, and chromospheric emission lines are thought to account for significant discrepancies between observed and calculated values. Two new fluorescence mechanisms are identified by modeling the ultraviolet photospheric spectrum of Gamma Crucis.
A computation design system (CDS) is described in which these tools are integrated in a modular fashion. This CDS ties together four key areas of computational analysis: description of geometry; grid generation; computational codes; and postprocessing. Integration of improved computational fluid dynamics (CFD) analysis tools through integration with the CDS has made a significant positive impact in the use of CFD for engineering design problems. Complex geometries are now analyzed on a frequent basis and with greater ease.
The goal of this study is to validate the global cloud parameters derived from the satellite-borne HIRS2 and MSU atmospheric sounding instrument measurements, and to use the analysis of these data as one prototype for studying large geophysical data sets in general. The HIRS2/MSU data set contains a total of 40 physical parameters, filling 25 MB/day; raw HIRS2/MSU data are available for a period exceeding 10 years. Validation involves developing a quantitative sense for the physical meaning of the derived parameters over the range of environmental conditions sampled. This is accomplished by comparing the spatial and temporal distributions of the derived quantities with similar measurements made using other techniques, and with model results. The need to work with Level 2 (point) data, rather than Level 3 (gridded) data for validation purposes is discussed, and some techniques developed for charting the assumptions made in deriving an algorithm and generating a code to produce geophysical quantities from measured radiances are presented.
The control point form (CPF) provides explicit control of physical grid shape and grid spacing through the movement of the control points. The control point array, called a control net, is a space grid type arrangement of locations in physical space with an index for each direction. As an algebraic method CPF is efficient and works well with interactive computer graphics. A family of menu-driven, interactive grid-generation computer codes (TURBO) is being developed by using CPF. Key features of TurboI (a TURBO member) are discussed and typical results are presented. TurboI runs on any IRIS 4D series workstation.