Search NASA⌕ Search

SEARCH · Search NASA

Results for “column experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Vertical Cloud Climatology During TC4 Derived from High-Altitude Aircraft Merged Lidar and Radar Profiles

Aircraft lidar works by shooting laser pulses toward the earth and recording the return time and intensity of any of the light returning to the aircraft after scattering off atmospheric particles and/or the Earth s surface. The scattered light signatures can be analyzed to tell the exact location of cloud and aerosol layers and, with the aid of a few optical assumptions, can be analyzed to retrieve estimates of optical properties such as atmospheric transparency. Radar works in a similar fashion except it sends pulses toward earth at a much larger wavelength than lidar. Radar records the return time and intensity of cloud or rain reflection returning to the aircraft. Lidar can measure scatter from optically thin cirrus and aerosol layers whose particles are too small for the radar to detect. Radar can provide reflection profiles through thick cloud layers of larger particles that lidar cannot penetrate. Only after merging the two instrument products can accurate measurements of the locations of all layers in the full atmospheric column be achieved. Accurate knowledge of the vertical distribution of clouds is important information for understanding the Earth/atmosphere radiative balance and for improving weather/climate forecast models. This paper describes one such merged data set developed from the Tropical Composition, Cloud and Climate Coupling (TC4) experiment based in Costa Rica in July-August 2007 using the nadir viewing Cloud Physics Lidar (CPL) and the Cloud Radar System (CRS) on board the NASA ER-2 aircraft. Statistics were developed concerning cloud probability through the atmospheric column and frequency of the number of cloud layers. These statistics were calculated for the full study area, four sub-regions, and over land compared to over ocean across all available flights. The results are valid for the TC4 experiment only, as preferred cloud patterns took priority during mission planning. The TC4 Study Area was a very cloudy region, with cloudy profiles occurring 94 percent of the time during the ER-2 flights. One to three cloud layers were common, with the average calculated at 2.03 layers per profile. The upper troposphere had a cloud frequency generally over 30%, reaching 42 percent near 13 km during the study. There were regional differences. The Caribbean was much clearer than the Pacific regions. Land had a much higher frequency of high clouds than ocean areas. One region just south and west of Panama had a high probability of clouds below 15 km altitude with the frequency never dropping below 25% and reaching a maximum of 60% at 11-13 km altitude. These cloud statistics will help characterize the cloud volume for TC4 scientists as they try to understand the complexities of the tropical atmosphere.

Hlavka, Dennis↗
DOE OSTI2021

Mesoscale Convective Systems Dominate the Energetics of the South Asian Summer Monsoon Onset

The onset of the South Asian summer monsoon (SASM) is featured as an abrupt increase of precipitation and atmospheric column-integrated moist static energy (MSE). Using convection permitting simulations, a novel cloud tracking technique, and an MSE budget, the relative roles of mesoscale convective systems (MCSs) and non-MCS isolated deep convection in the SASM onset are studied. The analysis shows MCSs play a crucial role in the sudden increases of rainfall, diabatic MSE sources, and the subsequent enhanced export of column-integrated MSE during the onset. A “diabatic sources-energy export” plane analysis delineates the different roles of MCSs and non-MCS deep convection in the SASM onset. Although deep convection always leads to a net energy export, mesoscale organization of deep convection dominates the convection associated positive feedbacks that accelerate the energy cycle of the SASM onset. Sensitivity experiment shows that the results are insensitive to the model resolutions.

Chen, Xingchao↗
NASA NTRS1922

Notes on the design of latticed columns subject to lateral loads

No rational column formula has yet been developed which gives results which are sufficiently precise for the design of airplane members, and consequently it is necessary to fall back upon experimental testing. In order to derive the maximum benefit from experiments, however, it is necessary that the experiments be guided by theory. It is the object here to modify existing formulae that may be obtained with a minimum number of tests. A discussion is given that is limited to the case of a simple column supported at both ends and subjected to uniformly distributed loads perpendicular to its axis and to end loads either axially or eccentrically applied. Discussed here are forces in the bracing of latticed columns, the application of theory to practical columns, loads in lattice members, and the strength of individual lattices.

Mccarthy, Charles J↗
DOE OSTI2022

Influence of design and operating parameters for additively manufactured intensified packing devices on CO 2 -Absorption column cooling and capture efficiency

Solvent-based CO 2 absorption is technologically a matured CO 2 capture pathway but suffers from: high regeneration energy demand, and solvent temperature rise and decreased capture efficiency caused by the heat of reaction. While research has focused on developing non-aqueous and low-aqueous solvents for decreasing the regeneration energy, the temperature bulge due to exothermic absorption is typically dealt with by cooling the solvent with an external inter-stage heat-exchanger. This approach may increase the overall process footprint, as well as capital and operating costs. Here, the current study explores a process intensification approach by incorporating inside the column an additively manufactured intensified packing device that consists of corrugated plates and internal coolant channels. The corrugated plates provide surface area for mass transfer between gas and liquid, while cooling fluid inside the internal channels removes heat from the exothermic reactive system. Two different intensified devices with specific surface areas of 266 m 2 /m 3 and 359 m 2 /m 3 were designed, manufactured, and tested inside a 2.06-m long and 0.203-m diameter column packed with commercial Mellapak 250Y packing. The device with a lower surface area showed up to 27 % reduction in cooling performance. A steady-state heat transfer model provides good agreement with the experimental column temperature and intra-stage heat removal data. Although a decrease in heat transfer performance was observed for the device with lower surface area, CO 2 capture experiments performed with simulated flue gas and low-aqueous solvent demonstrated that both intensified devices lead to a similar improvement of 12 % in capture efficiency. This study provides an understanding on simplifying the intensified packing device geometry and decreasing the device fabrication cost by 25 % without compromising with the CO 2 absorption performance of the packed column.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Development of polymeric coatings for control of electro-osmotic flow in ASTP MA-011 electrophoresis technology experiment

The development of a methyl cellulose based coating system for control of electro-osmotic flow at the walls of electrophoresis cells is described. Flight electrophoresis columns were coated with this system, resulting in a flight set of six columns. In flight photography of MA-011 electrophoretic separations verified control of electro-osmotic flow.

Patterson, W. J.↗
NASA NTRS1995

Studies of planetary scale waves and instabilities in support of the geophysical fluid flow cell experiment on USML-2

High resolution numerical simulations of thermal convection in a rapidly rotating channel with gravity perpendicular to the rotation vector are described. The convecting columns are subject to a beta-effect resulting from cross-channel topographic vortex stretching. The symmetries of the problem allow many invariant wavenumber sets, and this property is associated with the existence of stable multiple-equilibria at modest supercriticality. The transition to chaotic behavior involves the production of intermittent unstable orbits off a two-torus in energy space. At very high Rayleigh number (of order 10(exp 6) to 10(exp 7)) the motion can be turbulent, depending on the size of beta. However, the turbulence is usually characterized by an almost-periodic formation of patches of small scale convection that cause regular pulsations in the accompanying strong zonal jets. The processes maintaining these flows may be related to those responsible for the zonal currents on Jupiter and for cyclic variability on the Sun.

Hart, J. E.↗
DOE OSTI2021

Risk-Averse Bi-Level Stochastic Network Interdiction Model for Cyber-Security Risk Management

Security of cyber networks is crucial; recent severe cyber-attacks have had a devastating effect on many large organizations. The attack graph, which maps the potential attack paths of a cyber network, is a popular tool for analyzing cyber system vulnerability. In this study, we propose a bi-level stochastic network interdiction model on an attack graph to enable a risk-averse, resource constrained cyber network defender to optimally deploy security countermeasures that protect against attackers with an uncertain budget. This risk- averse conditional-value-at-risk (CVaR) model minimizes a weighted sum of the expected maximum loss over all scenarios and the expected maximum loss from the most damaging attack scenarios. We develop a customized constraint and column generation algorithm to solve our model as well as several acceleration techniques to improve the computational efficiency. Numerical experiments demonstrate that the acceleration techniques enable the solution of relatively large problems within a reasonable amount of time: applying all the acceleration techniques also reduces the average computation time of the basic algorithm by 71% for 100-node graphs. Using metrics called mean-risk value of stochastic solution and value of risk-aversion, computational results suggest that our stochastic risk-averse model significantly outperforms deterministic and risk-neutral models when 1) the distribution of attacker budget is heavy-right-tailed and 2) the defender is highly risk-averse.

Bhuiyan, Tanveer H.↗
NASA NTRS1977

Viking image processing

The paper discusses the camera systems capable of recording black and white and color imagery developed for the Viking Lander imaging experiment. Each Viking Lander image consisted of a matrix of numbers with 512 rows and an arbitrary number of columns up to a maximum of about 9,000. Various techniques were used in the processing of the Viking Lander images, including: (1) digital geometric transformation, (2) the processing of stereo imagery to produce three-dimensional terrain maps, and (3) computer mosaicking of distinct processed images. A series of Viking Lander images is included.

Green, W. B.↗
NASA NTRS1988

Local buckling and crippling of composite stiffener sections

Local buckling, postbuckling, and crippling (failure) of channel, zee, and I- and J-section stiffeners made of AS4/3502 graphite-epoxy unidirectional tape are studied by experiment and analysis. Thirty-six stiffener specimens were tested statically to failure in axial compression as intermediate length columns. Web width is 1.25 inches for all specimens, and the flange width-to-thickness ratio ranges from 7 to 28 for the specimens tested. The radius of the stiffener corners is either 0.125 or 0.250 inches. A sixteen-ply orthotropic layup, an eight-ply quasi-isotropic layup, and a sixteen-ply quasi-isotropic layup are examined. Geometrically nonlinear analyses of five specimens were performed with the STAGS finite element code. Analytical results are compared to experimental data. Inplane stresses from STAGS are used to conduct a plane stress failure analysis of these specimens. Also, the development of interlaminar stress equations from equilibrium for classical laminated plate theory is presented. An algorithm to compute high order displacement derivatives required by these equations based on the Discrete Fourier Transform (DFT) is discussed.

Bonanni, David L.↗
NASA NTRS1994

Comparison of SAGE 2 ozone measurements and ozone soundings at Uccle (Belgium) during the period February 1985 to January 1986

The ozone profiles obtained from 24 balloon soundings, at 50 deg 48 min N, 4 deg 21 min E, carried out with the electro-chemical ozonesondes are discussed. The data were used as correlative data to the ozone profiles acquired by the Stratospheric Aerosol and Gas Experiment (SAGE 2). Good agreement was obtained between the two data sets. The difference of percentage between the ozone column density of the mean balloon and SAGE profile is 4.4% in the altitude region between 10 to 26 km. From the statistical analysis it seems that there is a difference between the mean profiles at the level of the ozone maximum and around the 30 km level. Similar results are obtained with an error analysis of both data. The differences between the mean profiles in the lower stratosphere are probably real, and are due to the presence of ozone.

Debacker, Hugo↗
NASA NTRS2010

Z-Pinch Pulsed Plasma Propulsion Technology Development

Fusion-based propulsion can enable fast interplanetary transportation. Magneto-inertial fusion (MIF) is an approach which has been shown to potentially lead to a low cost, small reactor for fusion break even. The Z-Pinch/dense plasma focus method is an MIF concept in which a column of gas is compressed to thermonuclear conditions by an axial current (I approximates 100 MA). Recent advancements in experiments and the theoretical understanding of this concept suggest favorable scaling of fusion power output yield as I(sup 4). This document presents a conceptual design of a Z-Pinch fusion propulsion system and a vehicle for human exploration. The purpose of this study is to apply Z-Pinch fusion principles to the design of a propulsion system for an interplanetary spacecraft. This study took four steps in service of that objective; these steps are identified below. 1. Z-Pinch Modeling and Analysis: There is a wealth of literature characterizing Z-Pinch physics and existing Z-Pinch physics models. In order to be useful in engineering analysis, simplified Z-Pinch fusion thermodynamic models are required to give propulsion engineers the quantity of plasma, plasma temperature, rate of expansion, etc. The study team developed these models in this study. 2. Propulsion Modeling and Analysis: While the Z-Pinch models characterize the fusion process itself, propulsion models calculate the parameters that characterize the propulsion system (thrust, specific impulse, etc.) The study team developed a Z-Pinch propulsion model and used it to determine the best values for pulse rate, amount of propellant per pulse, and mixture ratio of the D-T and liner materials as well as the resulting thrust and specific impulse of the system. 3. Mission Analysis: Several potential missions were studied. Trajectory analysis using data from the propulsion model was used to determine the duration of the propulsion burns, the amount of propellant expended to complete each mission considered. 4. Vehicle Design: To understand the applicability of Z-Pinch propulsion to interplanetary travel, it is necessary to design a concept vehicle that uses it -- the propulsion system significantly impacts the design of the electrical, thermal control, avionics and structural subsystems of a vehicle. The study team developed a conceptual design of an interplanetary vehicle that transports crew and cargo to Mars and back and can be reused for other missions. Several aspects of this vehicle are based on a previous crewed fusion vehicle study -- the Human Outer Planet Exploration (HOPE) Magnetized Target Fusion (MTF) vehicle. Portions of the vehicle design were used outright and others were modified from the MTF design in order to maintain comparability.

Polsgrove, Tara↗
NASA NTRS2011

Disinfection of Spacecraft Potable Water Systems by Photocatalytic Oxidation Using UV-A Light Emitting Diodes

Ultraviolet (UV) light has long been used in terrestrial water treatment systems for photodisinfection and the removal of organic compounds by several processes including photoadsorption, photolysis, and photocatalytic oxidation/reduction. Despite its effectiveness for water treatment, UV has not been explored for spacecraft applications because of concerns about the safety and reliability of mercury-containing UV lamps. However, recent advances in ultraviolet light emitting diodes (UV LEDs) have enabled the utilization of nanomaterials that possess the appropriate optical properties for the manufacture of LEDs capable of producing monochromatic light at germicidal wavelengths. This report describes the testing of a commercial-off-the-shelf, high power Nichia UV-A LED (250mW A365nnJ for the excitation of titanium dioxide as a point-of-use (POD) disinfection device in a potable water system. The combination of an immobilized, high surface area photocatalyst with a UV-A LED is promising for potable water system disinfection since toxic chemicals and resupply requirements are reduced. No additional consumables like chemical biocides, absorption columns, or filters are required to disinfect and/or remove potentially toxic disinfectants from the potable water prior to use. Experiments were conducted in a static test stand consisting of a polypropylene microtiter plate containing 3mm glass balls coated with titanium dioxide. Wells filled with water were exposed to ultraviolet light from an actively-cooled UV-A LED positioned above each well and inoculated with six individual challenge microorganisms recovered from the International Space Station (ISS): Burkholderia cepacia, Cupriavidus metallidurans, Methylobacterium fujisawaense, Pseudomonas aeruginosa, Sphingomonas paucimobilis and Wautersia basilensis. Exposure to the Nichia UV-A LED with photocatalytic oxidation resulted in a complete (>7-log) reduction of each challenge bacteria population in <180 minutes of contact time. With continued advances in the design and manufacture of UV-A LEDs and semi-conducting photocatalysts, LED activated photochemical process technology promises to extend its application to spacecraft environmental systems.

Birmele, Michele N.↗
NASA NTRS2016

Quantifying the Contribution of Thermally Driven Recirculation to a High-Ozone Event Along the Colorado Front Range Using Lidar

A high-ozone (O3) pollution episode was observed on 22 July 2014 during the concurrent Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) and Front Range Air Pollution and Photochemistry Experiment (FRAPPE) campaigns in northern Colorado. Surface O3 monitors at three regulatory sites exceeded the Environmental Protection Agency (EPA) 2008 National Ambient Air Quality Standard (NAAQS) daily maximum 8h average (MDA8) of 75ppbv. To further characterize the polluted air mass and assess transport throughout the event, measurements are presented from O3 and wind profilers, O3-sondes, aircraft, and surface-monitoring sites. Observations indicate that thermally driven upslope flow was established throughout the Colorado Front Range during the pollution episode. As the thermally driven flow persisted throughout the day, O3 concentrations increased and affected high-elevation Rocky Mountain sites. These observations, coupled with modeling analyses, demonstrate a westerly return flow of polluted air aloft, indicating that the mountain-plains solenoid circulation was established and impacted surface conditions within the Front Range.

Front Range Air Pollution and Photochemistry Exper↗
NASA NTRS2020

Radiative Heating from Biomass Burning Aerosol and its Impact on Cloud Structure in the Southeast Atlantic

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. The observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site. Due to documented discrepancies in the single scatter albedo (SSA) between models and observations, further sensitivity experiments will demonstrate the importance of the optical properties of biomass burning aerosol in accurately representing heating within the column. Finally, the heating rates will be put into context of the cloud structure over the site from the perspective of the mass flux closure from the University of Washington shallow convective scheme.

Collow, Allison↗
NASA NTRSDate not supplied

Improving Regional Air Quality Forecasting Through Chemical Data Assimilation and Dynamic Emissions Adjustment

Poor air quality (AQ) is one of the most important human-health and environmental problems facing the United States (US). In addition to the detrimental impacts on human- and environmental-health, poor AQ has an economic cost of ~5% of the US gross domestic product (~$790 billion). AQ managers use AQ analyses and modeling to better understand, anticipate, and avoid poor AQ events. Our research focuses on improving AQ analysis/forecast skill, predictability, and emission estimates through improved and more efficient: (i) modeling and data assimilation strategies; (ii) dynamic emissions adjustment strategies; and (iii) use of satellite remote-sensing Earth observations (e.g., MOPITT, IASI, MODIS, OMI, TROPOMI, TEMPO, etc.). This seminar will review: (i) regional chemical weather forecasting/data assimilation with dynamic emissions adjustment with WRF-Chem/DART; (ii) strategies for efficiently assimilating satellite retrieval profiles with ‘compact phase space retrievals’ (CPSRs); (iii) results from joint assimilation of multiple satellite retrievals at medium (12 km × 12 km) and high (4 km × 4 km) spatial resolutions; and (iv) results from observing system simulation experiments (OSSEs) to investigate whether we can recover COVID-period anthropogenic emissions by assimilating synthetic TEMPO NO2 tropospheric column retrievals with dynamic emissions adjustment. Biographical Sketch: Dr. Mizzi is a Senior Research Fellow working and Dr. Johnson at the NASA Ames Research Center. He holds BA and MS degrees in Environmental Science from the University of Virginia, MS and PhD degrees in Applied Mathematics from the University of Colorado at Boulder (CUB), and a JD degree (with an emphasis in Environmental Law) from the University of Colorado School of Law. He worked at the National Center for Atmospheric Research for nearly 25 years on global atmospheric modeling, dynamic and physical initialization, regional hybrid data assimilation, and most recently on regional chemical data assimilation. He also worked as an environmental attorney and consultant for nearly 15 years. He is an expert in numerical modeling and is recognized internationally as a leading expert in regional, chemical data assimilation with dynamic emissions adjustment. Dr. Mizzi became affiliated with NASA Ames in March 2020 to work on improving AQ analysis/forecast skill, predictability, and ‘top-down’ emissions adjustment though the assimilation of Earth observations. An emphasis of his current work is developing methods for assimilating synthetic TEMPO retrievals to quantify the expected benefits of TEMPO relative to existing AQ observations.

Arthur P. Mizzi↗
DOE OSTI2021

ORNL FACE Tree Height, with data on height of a subset of trees measured every year, 1997-2009. Free-Air CO2 Enrichment (FACE) Experiment Synthesis Activities.

Height of 20 sweetgum trees in three rows of each of the plots in the Oak Ridge National Laboratory (ORNL) free-air CO2 enrichment (FACE) experiment was measured each year of the experiment (1997-2009). The trees were exposed to ambient or elevated CO2. Tree height data contribute to the overall project objectives to determine the integrated response of a deciduous forest to elevated CO2. Average tree height per plot was used in allometric equations to calculate tree dry mass each year and to test whether there were effects of elevated CO2 on canopy development. Height was derived from trigonometric calculation from measurements of horizontal distance of observer from the bole and the angles from observer’s eye to top and base of tree, using a Haglof sonic hypsometer. The data are presented in a csv file, with plot number in the first column, tree number in the second column, and height recorded to 0.1 m in 1997 to 2009 in remaining columns. Plots 1 and 2 had elevated CO2, and plots 3-5 were in ambient CO2. Missing data occur after the tree died. The experiment and the height measurement are described in: Norby, R. J., D. E. Todd, J. Fults, and D. W. Johnson. 2001. Allometric determination of tree growth in a CO2-enriched sweetgum stand. New Phytologist 150: 477-487. The ORNL FACE experiment is described at: https://richnorby.org/home/face-home/.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

Multi-Decadal Records of Stratospheric Composition and Their Relationship to Stratospheric Circulation Change

Constituent evolution for 1990-2015 simulated using the Global Modeling Initiative chemistry and transport model driven by meteorological fields from the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2) is compared with three sources of observations: ground-based column measurements of HNO3 and HCl from two stations in the Network for the Detection of Atmospheric Composition Change (NDACC, 1990- ongoing), profiles of CH4 from the Halogen Occultation Experiment (HALOE) on the Upper Atmosphere Research Satellite (UARS, 1992-2005), and profiles of N2O from the Microwave Limb Sounder on the Earth Observing System satellite Aura (2005- ongoing). The differences between observed and simulated values are shown to be time dependent, with better agreement after 2000 compared with the prior decade. Furthermore, the differences between observed and simulated HNO3 and HCl columns are shown to be correlated with each other, suggesting that issues with the simulated transport and mixing cause the differences during the 1990s and that these issues are less important during the later years. Because the simulated fields are related to mean age in the lower stratosphere, we use these comparisons to evaluate the time dependence of mean age. The ongoing NDACC column observations provide critical information necessary to substantiate trends in mean age obtained using fields from MERRA-2 or any other reanalysis products.

Profiles of N2O from the Microwave Limb Sounde↗
DOE OSTI2025

Angularly resolved spectral reconstruction of x rays via filter pack attenuation

We have designed a new filter pack array to measure angular variations in x-ray spectra during a single shot. The filter pack was composed of repeating identical columns of aluminum and copper filters of varying thicknesses. These columns were located at different positions to measure the spectrum at each corresponding angle. This array was utilized in an experiment to measure the energy evolution of betatron x rays in a laser wakefield accelerator by curving the wakefield with a transverse density gradient, streaking the x rays across the array in front of an x-ray charge-coupled device (CCD) camera. After subtracting the background and “flattening” the image to remove spatial nonuniformities, a critical energy was calculated for each position that produced the best agreement with the measured signal. There was a clear change in critical energy with angle, shedding light on the dynamics of the electrons that traveled through the accelerator. Furthermore, these angles correspond to distinct emission times, covering a timescale of tens of picoseconds. The filter pack was capable of recovering these angular details without the impact of errors introduced by shot-to-shot variability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗