Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer code development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Virtual Framework for Development and Testing of Federation Software Stack

Softwarization of networked infrastructures combined with containerization of codes promises unprecedented computing capabilities distributed across the federations of computing systems and physical instruments. The development and testing of a software stack that implements these capabilities over an expensive physical production infrastructure is not cost-effective, and in the early stages, may potentially cause service disruptions. To address these aspects, we develop the Virtual Federated Science Instrument Environment (VFSIE), a digital twin of the physical infrastructure that emulates a multi-site federation. Each federated site is emulated using containers and virtual hosts that are connected over local-area networks, and the sites, in turn, are connected over an emulated wide-area network. We describe the framework design and implementation details. We also illustrate its application by emulating a federation of four laboratories that use Jupyter Notebook for computations and the EPICS software system for instrument control.

Al Najjar, Anees↗

Investigating Accident Tolerant Fuel Concepts using the BISON Fuel Performance Code

There has been an increased interest in research of accident tolerant fuels (ATF) and claddings for use in commercial reactors ever since the events that occurred at the Fukushima Daiichi nuclear power plant in 2011. The economic impact of these events on the nuclear energy sector is significant. As a result, the United States Department of Energy's Office of Nuclear Energy accelerated research in nuclear fuel concepts with enhanced accident tolerance as part of its Fuel Cycle Research and Development (FCRD) Advanced Fuels Campaign (AFC). A report produced by the AFC entitled Light Water Reactor Accident Tolerant Fuel Performance Metrics outlines a set of metrics that can be used to guide selection of promising ATF concepts. Moreover, the report specifies that a down-selection is to occur in the 2016-2017 time frame, at which time the program will move from a proof-of-concept to a proof-of-principle stage with continued research and development into a small set of concepts. Given the time necessary for comprehensive irradiation experiments and post-irradiation examination, it is impossible to perform a complete set of experiments for material characterization. Therefore, the AFC is utilizing computational analysis tools in an effort to understand the proposed materials under a variety of normal operating and accident conditions. For some time, the DOE's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has been developing computational analysis tools for nuclear fuel simulation. These codes include BISON and Marmot which investigate fuel behavior at the continuum and microstructural scales, respectively. In 2014, NEAMS introduced what it calls High Impact Problems (HIPs) into its program plan. These HIPs are intended to make significant advancements in a particular area of nuclear power research in a short period of time (3 years or less). NEAMS has chosen an ATF project, which emphasizes utilizing BISON and Marmot to model proposed materials, as its first HIP. This summary focuses on the methodology being utilized for investigation of ATF concepts using the BISON fuel performance code. First, we give an overview of the model development for two candidate ATF materials, FeCrAl for cladding and uranium silicide (U{sub 3}Si{sub 2}) for fuel. Then, we present the approach for deciding which simulations are necessary given the importance of such simulations in providing a detailed report into the fuel performance behavior of these materials by the conclusion of the HIP. In absence of experimental data and given the aggressive schedule outlined by the AFC for ATF research and development, computational analysis tools are required. These tools are being used to help guide experiment design and to perform bounding and sensitivity studies to gain valuable information for which experimental data is limited. In support of this effort, models have been incorporated into BISON for simulation of U{sub 3}Si{sub 2} and FeCrAl. Continued material model development and engineering analysis will help address questions related to the performance of these ATF materials under normal operating and accident conditions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Numerical simulation of runaway electrons: 3-D effects on synchrotron radiation and impurity-based runaway current dissipation

Numerical simulations of runaway electrons (REs) with a particular emphasis on orbit dependent effects in 3-D magnetic fields are presented. The simulations were performed using the recently developed Kinetic Orbit Runaway electron Code (KORC) that computes the full-orbit relativistic dynamics in prescribed electric and magnetic fields including radiation damping and collisions. The two main problems of interest are synchrotron radiation and impurity-based RE dissipation. Synchrotron radiation is studied in axisymmetric fields and in 3-D magnetic configurations exhibiting magnetic islands and stochasticity. For passing particles in axisymmetric fields, neglecting orbit effects might underestimate or overestimate the total radiation power depending on the direction of the radial shift of the drift orbits. For trapped particles, the spatial distribution of synchrotron radiation exhibits localized “hot” spots at the tips of the banana orbits. In general, the radiation power per particle for trapped particles is higher than the power emitted by passing particles. The spatial distribution of synchrotron radiation in stochastic magnetic fields, obtained using the MHD code NIMROD, is strongly influenced by the presence of magnetic islands. 3-D magnetic fields also introduce a toroidal dependence on the synchrotron spectra, and neglecting orbit effects underestimates the total radiation power. In the presence of magnetic islands, the radiation damping of trapped particles is larger than the radiation damping of passing particles. Results modeling synchrotron emission by RE in DIII-D quiescent plasmas are also presented. The computation uses EFIT reconstructed magnetic fields and RE energy distributions fitted to the experimental measurements. Qualitative agreement is observed between the numerical simulations and the experiments for simplified RE pitch angle distributions. However, it is noted that to achieve quantitative agreement, it is necessary to use pitch angle distributions that depart from simplified 2-D Fokker-Planck equilibria. Finally, using the guiding center orbit model (KORC-GC), a preliminary study of pellet mitigated discharges in DIII-D is presented. The dependence of RE energy decay and current dissipation on initial energy and ionization levels of neon impurities is studied. Furthermore, the computed decay rates are within the range of experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Yield degradation mechanisms for two-shock capsules evaluated through simulations

An investigation of twenty two-shock campaign indirectly driven capsules on the National Ignition Facility was conducted using the xRAGE computer code. The two-shock platform was developed to look at the sensitivity of fuel–ablator mix with shock timing, asymmetry, surface roughness, and convergence on roughly ignition size scale capsules. This platform used CH/CD (plastic/deuterated plastic) shell capsules that were about 685-μm outer radius and filled with D2 or hydrogen-tritium (HT) gas. The experimental radius and velocity vs time, neutron yield, burn averaged ion temperature (Tion), burn width, and self-emission image size were compared to one-dimensional (1D) and two-dimensional (2D) simulations. Our 2D simulations suggest that the mixing of glass from the fill tube was the dominant source of impurity in the gas region of the capsule during burn, along with fuel–ablator mix. The mass of glass mixed in is about 5–10 ng. Our 2D simulations capture most of the yield trends from different degradation mechanisms, and they match the observed burn width and Tion measurements. Our 2D models match all the available data to within 2.5 times the normalized experimental error for 19 of 20 capsules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Study of Low-Temperature Neutron Star Atmospheres

We present a study of how a low-temperature accreted atmosphere influences the emitted X-ray spectrum of a neutron star. The atmosphere models and spectra were computed with Zcode, a multigroup radiation transfer code developed at the Los Alamos National Laboratory. Though the underlying hot neutron star behaves as a blackbody, the atmosphere shifts the peak of spectrum away from a blackbody and toward higher energies, producing an emitted spectrum similar to a dilute blackbody. Quantifying the effects of this atmosphere will remove a source of uncertainty in X-ray observations and better constrain the mass-radius relation for neutron stars and thus the equation of state of dense matter. We present a suite of these atmospheres with varying compositions and temperatures as well as the resulting spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Slouching towards exascale.

One question before the high-performance computing community is 'How will application developers write code for exascale machines?' At this point it looks like they might be riding a rough beast indeed. This paper is a brief assessment of where we stand now with respect to writing programs for our largest supercomputers and what we should do next. MPI is likely to remain a critical part of the programming infrastructure as we move towards exascale, but more is needed, in particular a robust, portable, and effective standard for parallel programming within a single address space, perhaps for heterogeneous processors. Formal methods provide the only truly scalable approach to developing correct code in this complex programming environment.

99 GENERAL AND MISCELLANEOUS↗

Propagation And Damping Of High Harmonic Fast Waves And Electron Cyclotron Waves In The Nstx-U-Device

For the spherical torus and for conventional tokamaks to be viable means of producing fusion energy there are two important requirements. The first is to heat the plasma in the experimental devices to high temperatures; preferably, to fusion relevant temperatures. The second is to drive a current in the plasma so that the fusion device operates in a steady-state mode. A pulsed fusion reactor for energy production is not desirable. A favored means to achieve both of these requirements is through the use of microwaves, commonly referred to as radio frequency waves. This proposal was to understand observations from the National Spherical Torus Experiment Upgrade (NSTX-U) device on radio frequency wave heating of the confined plasma during operations with high harmonic fast waves. The proposed research was also directed toward assisting in the optimization of the experimental modes of operation so as to maximize the heating efficiency. A detailed analysis of the experiments has shown that about one-third of the input radio frequency power does not make it into the core region of the plasma where heating is required. The losses are believed to occur primarily in the edge region where the radio frequency power is initially coupled into the plasma. Using sophisticated computational codes and theoretical models, that have been developed for the NSTX-U experimental program, this research quantified the physical processes which occur in the edge plasma and lead to a decrease in the heating efficiency. The effect of edge turbulence on the scattering of radio frequency waves was studied for waves in the ion cyclotron and electron cyclotron range of frequencies. For high harmonic fast waves in the ion cyclotron range of frequencies, simulations were carried out using a full-wave solver that was extended to the vacuum vessel wall. These simulations successfully reproduced trends that were observed experimentally. This simulation capability was also used to study the interaction of high harmonic fast waves with the scrape-off layer plasma. More recently, a new technique has been developed for the calculation of radio frequency waves in toroidal geometry that enables the simultaneous incorporation of antenna geometry, plasma facing components, the scrape off-layer, and core propagation in the high harmonic fast wave regime. The effect of turbulent plasmas on the mode conversion of extraordinary electromagnetic waves in the electron cyclotron range of frequencies in the NSTX-U plasma has been studied theoretically. In the over-dense plasmas of NSTX-U, the traditional electromagnetic waves are not effective for delivering energy and momentum to the core plasma. However, electron Bernstein waves generated by mode conversion are efficient carriers of wave energy and momentum to the core. The mode conversion occurs in the turbulent edge region. A theory for mode conversion in such plasmas has been developed. The parameters that can optimize the mode conversion can be readily determined. Also, the model is useful for experimentalists to analyze observation on a shot-to-shot basis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation And Damping Of High Harmonic Fast Waves And Electron Cyclotron Waves In The Nstx-U-Device

For the spherical torus and for conventional tokamaks to be viable means of producing fusion energy there are two important requirements. The first is to heat the plasma in the experimental devices to high temperatures; preferably, to fusion relevant temperatures. The second is to drive a current in the plasma so that the fusion device operates in a steady-state mode. A pulsed fusion reactor for energy production is not desirable. A favored means to achieve both of these requirements is through the use of microwaves, commonly referred to as radio frequency waves. This proposal was to understand observations from the National Spherical Torus Experiment Upgrade (NSTX-U) device on radio frequency wave heating of the confined plasma during operations with high harmonic fast waves. The proposed research was also directed toward assisting in the optimization of the experimental modes of operation so as to maximize the heating efficiency. A detailed analysis of the experiments has shown that about one-third of the input radio frequency power does not make it into the core region of the plasma where heating is required. The losses are believed to occur primarily in the edge region where the radio frequency power is initially coupled into the plasma. Using sophisticated computational codes and theoretical models, that have been developed for the NSTX-U experimental program, this research quantified the physical processes which occur in the edge plasma and lead to a decrease in the heating efficiency. The effect of edge turbulence on the scattering of radio frequency waves was studied for waves in the ion cyclotron and electron cyclotron range of frequencies. For high harmonic fast waves in the ion cyclotron range of frequencies, simulations were carried out using a full-wave solver that was extended to the vacuum vessel wall. These simulations successfully reproduced trends that were observed experimentally. This simulation capability was also used to study the interaction of high harmonic fast waves with the scrape-off layer plasma. More recently, a new technique has been developed for the calculation of radio frequency waves in toroidal geometry that enables the simultaneous incorporation of antenna geometry, plasma facing components, the scrape off-layer, and core propagation in the high harmonic fast wave regime. The effect of turbulent plasmas on the mode conversion of extraordinary electromagnetic waves in the electron cyclotron range of frequencies in the NSTX-U plasma has been studied theoretically. In the over-dense plasmas of NSTX-U, the traditional electromagnetic waves are not effective for delivering energy and momentum to the core plasma. However, electron Bernstein waves generated by mode conversion are efficient carriers of wave energy and momentum to the core. The mode conversion occurs in the turbulent edge region. A theory for mode conversion in such plasmas has been developed. The parameters that can optimize the mode conversion can be readily determined. Also, the model is useful for experimentalists to analyze observation on a shot-to-shot basis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nuclide Inventory Benchmark for BWR Spent Nuclear Fuel: Challenges in Evaluation of Modeling Data Assumptions and Uncertainties

This work discusses challenges and approaches to uncertainty analyses associated with the development of a nuclide inventory benchmark for fuel irradiated in a boiling water reactor. The benchmark under consideration is being developed based on experimental data from the SFCOMPO international database. The focus herein is on how to address missing data in fuel design and operating conditions that are important for adequately simulating the time-dependent changes in fuel during irradiation in the reactor. The effects of modeling assumptions and uncertainties in modeling parameters on the calculated nuclide inventory were analyzed and quantified through computational models developed using capabilities in the SCALE code system. Particular attention was given to the impact of the power history and water coolant density on the calculated nuclide inventory, as well as to the effect of geometry modeling considerations not usually addressed in a nuclide inventory benchmark. These considerations include gap closure, channel bow, and channel corner radius, which do not usually apply to regular reactor operation but are relevant for assessing impacts of potential anomalous operating scenarios.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Theoretical and computational studies on the scattering of radio frequency waves by fluctuations

The practical and economic viability of tokamak fusion reactors depends, in a significant way, on the efficiency of radio frequency (RF) waves to deliver energy and momentum to the plasma in the core of the reactor. Among the various attributes of RF waves is their ability to heat magnetically confined plasmas, induce plasma currents in an effort to achieve steady state, and modify the current profile so as to control plasma instabilities like the neoclassical tearing modes. The RF electromagnetic waves, excited by antenna structures placed near the wall of a tokamak, have to propagate through the turbulent plasma in the scrape-off layer (SOL) along their path to the core plasma. While the propagation and damping of RF waves in the core is reasonably well understood, the same is not true for RF propagation through the SOL. In present day fusion devices, the radial width of the SOL is of the order of a few centimeters. In ITER and in future fusion reactors this width will be of the order of tens of centimeters. Any deleterious effects on RF waves due to plasma turbulence in the SOL has to be properly understood in order to optimize the delivery of RF energy and momentum into the core. This paper is on a multi-pronged approach that is being pursued to quantify the effect of SOL plasma on RF waves. The SOL is composed of coherent filamentary, or blob like, structures and incoherent fluctuations. For coherent structures a full-wave theoretical model has been developed. This model is used to benchmark computational codes that are subsequently used to study general distribution of filaments, thereby extending the range of the theoretical formulation. For incoherent fluctuations, a common approach towards quantifying the effects of turbulence is the Kirchhoff technique. This technique is based on physical optics and the wave fields at any point on a spatially varying surface are approximated to be the same as the fields on a tangent plane at that point. The results from the theoretical analysis are compared with full-wave numerical simulations for incoherent fluctuations. The final part of these studies is to construct the effective permittivity of a turbulent plasma that is a mix of coherent and incoherent fluctuations. Towards this end, the ``effective medium approximation'' is being used to construct the permittivity of the turbulent plasma that will be used in full-wave and physical optics studies of scattering. All these approaches are distinctly different from previous studies on the RF wave propagation through turbulent plasmas. The theory and computations discussed in this paper apply to RF waves in any frequency range and for arbitrary variations in density, and reveal new and important physical insights into the scattering of RF waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

REVIEW OF RESULTS FOR THE OECD/NEA PHASE VII BENCHMARK: STUDY OF SPENT FUEL COMPOSITIONS FOR LONG TERM DISPOSAL

This paper summarizes the problem specification and compares participants results for the OECD/NEA/WPNCS Expert Group on Burn-up Credit Criticality Safety Phase VII Benchmark Study of Spent Fuel Compositions for Long-Term Disposal. The Phase VII benchmark was developed to study the ability of relevant computer codes and associated nuclear data to predict spent fuel isotopic compositions and corresponding keff values in a cask configuration over the time duration relevant to spent nuclear fuel (SNF) disposal. The benchmark was divided into two sets of calculations: (1) decay calculations out to 1,000,000 years for provided pressurized-water-reactor (PWR) UO2 discharged fuel compositions and (2) burnup credit criticality calculations for a representative cask model at selected time steps. Contributions from 15 organizations and companies in 10 countries were submitted to the Phase VII benchmark exercise. This paper provides a description of the Phase VII benchmark and detailed comparisons of the participants isotopic compositions and keff values that were calculated with a diversity of computer codes and nuclear data sets. Differences observed in the calculated time-dependent nuclide densities are attributed to different decay data or code-specific numerical approximations. The variability of the keff results is consistent with the evaluated uncertainty associated with cross-section data.

Radulescu, Georgeta↗

Gas Gun Model and Comparison to Experimental Performance of Pipe Guns Operating with Light Propellant Gases and Large Cryogenic Pellets

Injection of multiple large (~10 to 30 mm diameter) shattered pellets into ITER plasmas is presently part of the scheme planned to mitigate the deleterious effects of disruptions on the vessel components. To help in the design and optimize performance of the pellet injectors for this application, a model referred to as “the gas gun simulator” has been developed and benchmarked against experimental data. The computer code simulator is a Java program that models the gas-dynamics characteristics of a single-stage gas gun. Following a stepwise approach, the code utilizes a variety of input parameters to incrementally simulate and analyze the dynamics of the gun as the projectile is launched down the barrel. Using input data, the model can calculate gun performance based on physical characteristics, such as propellant-gas and fast-valve properties, barrel geometry, and pellet mass. Although the model is fundamentally generic, the present version is configured to accommodate cryogenic pellets composed of H2, D2, Ne, Ar, and mixtures of them and light propellant gases (H2, D2, and He). The pellets are solidified in situ in pipe guns that consist of stainless steel tubes and fast-acting valves that provide the propellant gas for pellet acceleration (to speeds ~200 to 700 m/s). The pellet speed is the key parameter in determining the response time of a shattered pellet system to a plasma disruption event. The calculated speeds from the code simulations of experiments were typically in excellent agreement with the measured values. With the gas gun simulator validated for many test shots and over a wide range of physical and operating parameters, it is a valuable tool for optimization of the injector design, including the fast valve design (orifice size and volume) for any operating pressure (~40 bar expected for the ITER application) and barrel length for any pellet size (mass, diameter, and length). Key design parameters and proposed values for the pellet injectors for the ITER disruption mitigation systems are discussed.

Combs, S. K.↗

Characterization of Neutron and Gamma Dose in the Irradiation Cell of Texas A and M University Research Reactor

The Monte Carlo N-Particle (MCNP) code was used to develop a three dimensional computational model of the Texas A and M University Nuclear Science Center Reactor (NSCR) operating against the irradiation (dry cell) at steady state thermal power of 1 MW. The geometry of the NSCR core and the dry cell were modeled in detail. NSCR is used for a wide variety of experiments that utilizes the dry cell for neutron as well as gamma irradiation of samples. Information on the neutron and gamma radiation environment inside the dry cell is required to facilitate irradiation of samples. This paper presents the computed neutron flux, neutron and gamma dose rate, and foil reaction rates in the dry cell, obtained through MCNP5 simulations of the NSCR core. The neutron flux was measured using foil activation method and the reaction rates obtained from {sup 197}Au(n,{gamma}){sup 198}Au and {sup 54}Fe(n,p){sup 54}Mn were compared with the model and they showed agreement within {approx} 20%. The gamma dose rate at selected locations inside the dry cell was measured using radiochromic films and the results indicate slightly higher dose rates than predicted from the model. This is because the model calculated only prompt gamma dose rates during reactor operation while the radiochromic films measured gammas from activation products and fission product decayed gammas. The model was also used to calculate the neutron energy spectra for the energy range from 0.001 eV- 20 MeV. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CTF Code Verification and Solution Verification

The CTF code is part of the suite of codes developed with DOE funding under the CASL Program to bring the benefits of high-performance computing to issues of importance to the US nuclear power industry. This document primarily focuses on code and solution verification test problems that have been developed to ensure that CTF converges to the correct answer for the intended application. Convergence behavior and numerical errors are quantified for each of the tests. The observed convergence behavior in all available tests is consistent with expectations for the numerical methods employed by CTF, providing evidence that there are no significant code bugs or algorithm deficiencies in the code. The suite of code verification and solution verification tests are mapped to core capabilities of CTF. Gaps were identified in the code verification test suite and they are being addressed. Two new code verification problems were developed to address gaps that were identified.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CG-Kit: Code Generation Toolkit for performant and maintainable variants of source code applied to Flash-X hydrodynamics simulations

CG-Kit is a new Code Generation tool-Kit that we have developed as a part of the solution for portability and maintainability for multiphysics computing applications. The development of CG-Kit is rooted in the urgent need created by the shifting landscape of high-performance computing platforms and the algorithmic complexities of a particular large-scale multiphysics application: Flash-X. To efficiently use computing resources on a heterogeneous node, an application must have a map of computation to resources and a mechanism to move the data and computation to the resources according to the map. Most existing performance portability solutions are focussed on abstracting the expression of computations so that a unified source code can be specialized to run on different resources. However, such an approach is insufficient for a code like Flash-X, which has a multitude of code components that can be assembled in various permutations and combinations to form different instances of applications. Similar challenges apply to any code that has composability, where a single specified way of apportioning work among devices may not be optimal. Additionally, use cases arise where the optimal control flow of computation may differ for different devices while the underlying numerics remain identical. This combination leads to unique challenges including handling an existing large code base in Fortran and/or C/C++, subdivision of code into a great variety of units supporting a wide range of physics and numerical methods, different parallelization techniques for distributed and shared memory systems and accelerator devices, and heterogeneity of computing platforms requiring coexisting variants of parallel algorithms. All of these challenges demand that scientific software developers apply existing knowledge about domain applications, algorithms, and computing platforms to determine custom abstractions and granularity for code generation. There is a critical lack of tools to tackle those problems. CG-Kit is designed to fill this gap by providing a user with the ability to express their desired control flow and computation-to-resource map in the form a pseudocode-like recipe. It consists of standalone tools that can be combined into highly specific and, we argue, highly effective portability and maintainability toolchains. Here we present the design of our new tools: parametrized source trees, control flow graphs, and recipes. The tools are implemented in Python. They are agnostic to the programming language of the source code targeted for code generation. In conclusion, we demonstrate the capabilities of the toolkit with two examples, first, multithreaded variants of the basic AXPY operation, and second, variants of parallel algorithms within a hydrodynamics solver, called Spark, from Flash-X that operates on block-structured adaptive meshes.

Algorithmic portability↗

A Flang Plugin for Fortran Feature Characterization

As new compute systems are developed, there is still a need to compile and execute codes authored in Fortran on these leading edge systems. In order to achieve this, development of compilers that support the latest hardware is continuously under development. Though the specification of Fortran is extensive, it is helpful to compiler authors to be able to prioritize the development of key features in order to get certain codes deemed important, e.g., applications of interest to leadership computing facilities, executable on leading edge compute systems. Identifying key features though is largely done through querying software experts or users of the Fortran applications of interest, who then manually report what features are and are not present. This exercise can both time consuming and error prone. To automate this process, we present a compiler plugin to Flang, the Fortran frontend for LLVM. This plugin is a tool that operates on the parse tree representation generated by Flang and detects key features based on walking parse tree nodes that correspond to features of interest. We show the result of our tool on four applications, three of which were manually profiled by software experts. We show the discrepancies between our tool and the manual characterization of the three applications, as well as generate a characterization for an application not yet profiled. We intend to open-source our tool in order to invite the community to benefit from the tool and make contributions for other features.

Cabrera, Anthony [ORNL]↗

Accelerated application development: The ORNL Titan experience

The use of computational accelerators such as NVIDIA GPUs and Intel Xeon Phi processors is now widespread in the high performance computing community, with many applications delivering impressive performance gains. However, programming these systems for high performance, performance portability and software maintainability has been a challenge. In this paper we discuss experiences porting applications to the Titan system. Titan, which began planning in 2009 and was deployed for general use in 2013, was the first multi-petaflop system based on accelerator hardware. To ready applications for accelerated computing, a preparedness effort was undertaken prior to delivery of Titan. In this paper we report experiences and lessons learned from this process and describe how users are currently making use of computational accelerators on Titan.

97 MATHEMATICS AND COMPUTING↗

Exploring Sensitivity of ICF Outputs to Design Parameters in Experiments Using Machine Learning

We report building a sustainable burn platform in inertial confinement fusion (ICF) requires an understanding of the complex coupling of physical processes and the effects that key experimental design changes have on implosion performance. While simulation codes are used to model ICF implosions, incomplete physics and the need for approximations deteriorate their predictive capability. Identification of relationships between controllable design inputs and measurable outcomes can help guide the future design of experiments and development of simulation codes, which can potentially improve the accuracy of the computational models used to simulate ICF implosions. In this article, we leverage developments in machine learning (ML) and methods for ML feature importance/sensitivity analysis to identify complex relationships in ways that are difficult to process using expert judgment alone. We present work using random forest (RF) regression for prediction of yield, velocity, and other experimental outcomes given a suite of design parameters, along with an assessment of important relationships and uncertainties in the prediction model. We show that RF models are capable of learning and predicting on ICF experimental data with high accuracy, and we extract feature importance metrics that provide insight into the physical significance of different controllable design inputs for various ICF design configurations. These results can be used to augment expert intuition and simulation results for optimal design of future ICF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗