Search NASA⌕ Search

SEARCH · Search NASA

Results for “conductive films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1959

Experimental Investigation of Gas-Side Performance of a Compact Finned-Tube Heat Exchanger

Heat-transfer and pressure-drop data were obtained experimentally for the gas side of a liquid-metal to air, compact finned-tube heat exchanger. The heat exchanger was fabricated from 0.185-inch Inconel tubing in an inline array. The fins were made of 310 stainless-steel- clad copper with a total thickness of 0.010 inch, and the fin pitch was 15.3 fins per inch. The liquid used as the heating medium was sodium. The heat-exchanger inlet gas temperature was varied from 5100 to 1260 R by burning JP fuel for airflow rates of 0.4 to 10.5 pounds per second corresponding to an approximate Reynolds number range of 300 to 9000. The sodium inlet temperature was held at 1400 R with the exception of a few runs taken at 1700 and 1960 R. The maximum ratio of surface temperature to air bulk temperature was 1.45. Friction-factor data with heat transfer were best represented by a single line when the density and viscosity of Reynolds number were evaluated at the average film temperature. At the lower Reynolds numbers reported, the friction data with heat transfer plotted slightly above the friction data without heat transfer. The density of the friction factor was calculated at the average bulk temperature. Heat-transfer results of this investigation were correlated by evaluating the physical properties of air (specific heat, viscosity, and thermal conductivity) at the film temperature.

Gedeon, Louis↗
NASA NTRS1987

Model of hot-film sensor with substrate

A detailed model is constructed to investigate parameters influencing a hot-film anemometer system used to study cross-flow phenomena on swept wings. This anemometer is designed to detect vortices set up by cross-flow. The nature of the vortices is not well known, and a well-verified instrumentation model is considered essential to allow accurate interpretation of experimental results. Previous investigators have indicated that heat conduction to the film's substrate is significant. Two variations on the inclusion of substrate effects in the model are discussed. In the first, the substrate is assumed to have a constant temperature throughput: in the second more elaborate model, the temperature of the substrate is allowed to vary. This variation is related to the convective heat removal at the substrate/gas interface.

Mcree, Griffith J.↗
NASA NTRS1984

Recent advances in electroluminescent displays applicable to future crew-station interfaces

The operative principles and progress to date on producing thin-film electroluminescent displays (TFEL) are discussed. TFEL displays consist of conductive, insulating and phosphor film layers deposited on a glass substrate. Applying a 200 V potential between the rows and columns in a multiplexed mode causes light to be emitted. Varying the voltage varies the grey level. The panels provide adequate contrast in full sunlight, and have demanded only 4-6 W for 15 sq in. displays. Alphanumeric, graphics, and video images have been generated with a 51 line by 80 character display. The upper limit on the panel size has not yet been defined. Efforts are under way to produce multicolor displays using red and blue phosphors. Trial units are being studied for avionics displays for, e.g., navigation, multipurpose displays, and attitude/direction indicators.

Miller, M. R.↗
DOE OSTI2020

Low temperature cofired ceramic substrates and fabrication techniques for the same

A low temperature cofired ceramic substrate comprises a plurality of dielectric layers, at least one inner conductor layer, a plurality of bond pads, and a solder mask. The dielectric layers are formed from ceramic material and placed one on top of another to form a stack. The inner conductor is formed from electrically conductive paste and positioned on an upper surface of at least one inner dielectric layer. The bond pads are positioned on an outer surface of the stack. Each bond pad is formed from a plurality of conductive sublayers of thin film metal stacked one on top of another, with each conductive sublayer being formed from a different metal. The solder mask is positioned on the same outer surface of the stack as the bond pads and includes a plurality of openings, with each opening exposing at least a portion of one of the bond pads.

42 ENGINEERING↗
NASA NTRS1980

Aircraft surface coatings study: Verification of selected materials

Three liquid coatings and four films that might improve and/or maintain the smoothness of transport aircraft surfaces are considered. Laboratory tests were performed on the liquid coatings (elastomeric polyurethanes) exposed to synthetic type hydraulic fluid, with and without a protective topcoat. Results were analyzed of a 14-month flight service evaluation of coatings applied to leading edges of an airline 727. Two additional airline service evaluations were initiated. Labortory tests were conducted on the films, bonded to aluminum substrate with various adhesives, to determine the best film/adhesive combinations. A cost/benefits analysis was performed and recommendations made for future work toward the application of this technology to commercial transports.

Source record↗
NASA NTRS1997

Organometallic Polymeric Conductors

For aerospace applications, the use of polymers can result in tremendous weight savings over metals. Suitable polymeric materials for some applications like EMI shielding, spacecraft grounding, and charge dissipation must combine high electrical conductivity with long-term environmental stability, good processability, and good mechanical properties. Recently, other investigators have reported hybrid films made from an electrically conductive polymer combined with insulating polymers. In all of these instances, the films were prepared by infiltrating an insulating polymer with a precursor for a conductive polymer (either polypyrrole or polythiophene), and oxidatively polymerizing the precursor in situ. The resulting composite films have good electrical conductivity, while overcoming the brittleness inherent in most conductive polymers. The highest conductivities reported (approximately 4/Scm) were achieved with polythiophene in a polystyrene host polymer. The best films using a polyamide as base polymer were four orders of magnitude less conductive than the polystyrene films. The authors suggested that this was because polyimides were unable to swell sufficiently for infiltration of monomer as in the polystyrene. It was not clear, however, if the different conductivities obtained were merely the result of differing oxidation conditions. Oxidation time, temperature and oxidant concentration varied widely among the studies.

Source record↗
NASA NTRS1992

High speed, nondestructive readout from thin-film ferroelectric memory

High-speed polarization-direction-dependent photoresponse from ferroelectric lead zirconate titanate (PbZr(0.53)Ti(0.47)O3) thin films sandwiched between conducting electrodes to form a memory capacitor is reported. Laser pulses with a full width at half maximum of around 10 ns at 532-nm wavelength are utilized to readout the photoresponse signal from individual polarized elements. Such readout is repeated over a million times, with no detectable degradation in the photoresponse or the remanent polarization suggesting its potential as a nondestructive readout (NDRO) of nonvolatile polarization state in thin-film ferroelectric memories. In principle both electronic as well as thermal mechanisms could be triggered by such photon exposure of ferroelectric thin films. A comparison of the photoresponse from capacitors with semitransparent and opaque top electrodes suggests that the observed NDRO signal is primarily due to thermally triggered mechanisms.

Thakoor, Sarita↗
DOE OSTI2020

Impact of Dispersion Solvent on Ionomer Thin Films and Membranes

Perfluorosulfonic acid (PFSA) ionomers are an important class of materials that many electrochemical devices rely on as their ion-conducting electrolyte. Often, PFSA films are prepared through solution-processing techniques. Previous research has demonstrated that the solvent environment affects PFSA dispersion conformation, but it is not clear to what extent (if at all) these conformational effects persist for thin films and membranes upon casting, nor how dispersion solvent impacts film formation during the drying process. Here in this paper, we explore these questions by systematically examining the effect of Thin Film all length scales affected by dispersion solvent water and n-propanol mixtures on PFSA thin-film formation and structure, membrane structure, and resulting properties. Using a combination of in situ, time-resolved grazing incidence X-ray scattering and tender wide-angle X-ray scattering, it is shown that films prepared from high-water-concentration dispersions exhibit stronger interactions and arrangement upon drying, and possess larger network domain sizes than those prepared from low-water-concentration dispersions. These stronger interactions likely manifest in greater network connectivity, as evidenced by enhanced conductivity for membranes and decreased water uptake for thin films. Significantly, these solvent-induced differences persist even after thermal annealing. It is clear that the dispersion solvent choice is a critical parameter controlling PFSA nano- and mesoscale structure and presents an important dial with which to direct PFSA macroscale properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Field-dependent nonelectronic contributions to thermal conductivity in a metallic ferromagnet with low Gilbert damping

Heat conduction in metals is typically dominated by electron transport since electrons carry both charge and heat. In magnetic metals magnons, or spin waves, excitations of the magnetic order can be used to transport information. Heat conduction via magnons has been previously shown mostly for insulating magnets with low Gilbert damping and resulting long spin-wave lifetimes where conduction electrons cannot contribute. Here we show that thin films of properly optimized metallic ferromagnetic (FM) alloys show significant nonelectronic contributions to heat conduction, which furthermore depend on the direction of an applied magnetic field. These measurements are enabled by micromachined thermal isolation platforms optimized for thermal conductivity measurements of thin-film systems. Electrical conductivity measurements on exactly the same samples allow application of the Wiedemann-Franz relation, which shows large nonelectronic contributions to thermal conductivity for the cobalt-iron alloy with 25% Co. This composition has been shown to have exceptionally low damping for a metallic FM. The thermal conductivity of a 75-nm-thick film of the 25% Co alloy changes by more than 20% at some temperatures, while a reference sample with 50% cobalt that has much higher damping shows no field-direction dependence. Our measurements indicate that applied magnetic fields alter the magnon lifetimes in these films and that these magnons contribute to thermal conductivity in this metallic magnetic alloy with low Gilbert damping.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Enhanced Hybridization and Nanopatterning via Heated Liquid-Phase Infiltration into Self-Assembled Block Copolymer Thin Films

Organic–inorganic hybrids featuring tunable material properties can be readily generated by applying vapor- or liquid-phase infiltration (VPI or LPI) of inorganic materials into organic templates, with resulting properties controlled by type and quantity of infiltrated inorganics. While LPI offers more diverse choices of infiltratable elements, it tends to yield smaller infiltration amount than VPI, but the attempt to address the issue has been rarely reported. Here in this paper, we demonstrate a facile temperature-enhanced LPI method to control and drastically increase the quantity and kinetics of Pt infiltration into self-assembled polystyrene-block-poly(2-vinylpyridine) block copolymer (BCP) thin films. By applying LPI at mildly elevated temperatures (40–80 °C), we showcase controllable optical functionality of hybrid BCP films along with conductive three-dimensional (3D) inorganic nanostructures. Structural analysis reveals enhanced metal loading into the BCP matrix at higher LPI temperatures, suggesting multiple metal ion infiltration per monomer of P2VP. Combining temperature-enhanced LPI with hierarchical multilayer BCP self-assembly, we generate BCP-metal hybrid optical coatings featuring tunable antireflective properties as well as scalable conductive 3D Pt nanomesh structures. Enhanced material infiltration and control by temperature-enhanced LPI not only enables tunability of organic–inorganic hybrid nanostructures and properties but also expands the application of BCPs for generating uniquely functional inorganic nanostructures.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Effects of dc bias on the fabrication of amorphous GdCo RF sputtered films

An investigation has been conducted on the effects of a dc bias field applied to Gd(1-x)Co(x) thin films during RF sputter deposition. Such films may possess uniaxial magnetic anisotropy with easy axis perpendicular to the plane of the film and may be used in magnetic bubble devices. Uniformity in composition, thickness and magnetic properties has been achieved and film composition has been controlled to within one percent. However, significant variations of magnetic properties were observed from film to film.

Bourne, H. C., Jr.↗
DOE OSTI2022

A Review on Application of Poly(3,4-ethylenedioxythiophene) (PEDOT) in Rechargeable Batteries

Since the very first patent on poly(3,4-ethylenedioxythiophene) (PEDOT) that was filed in 1988, this polymer has been widely utilized and has achieved great success owing to its high electrical conductivity and excellent stability. The application of the conducting polymer, PEDOT, in renewable energy devices, especially rechargeable batteries, is attracting increasing attention due to its potential to solve the energy and climate crisis. In this review, we summarize the research over the past few decades directed toward the application of PEDOT in rechargeable batteries aimed at improving their electrochemical performance. We focus on PEDOT synthesized via oxidative chemical vapor deposition (oCVD), a relatively new process known for its ability to grow conducting polymer thin films with uniform, pinhole-free properties, and controllable thickness and conformality. For a comparison purpose, PEDOT synthesized via solution-based methods is also briefly summarized. Finally, future research directions for applying oCVD PEDOT in rechargeable batteries are discussed. Introduction PEDOT Synthesis Methods Application of oCVD PEDOT in Rechargeable Batteries Applications of Solution-Based PEDOT in Rechargeable Batteries Conclusions and Outlook

25 ENERGY STORAGE↗
NASA NTRS2017

Nanotube Film Electrode and an Electroactive Device Fabricated with the Nanotube Film Electrode and Methods for Making Same

Disclosed is a single wall carbon nanotube (SWCNT) film electrode (FE), all-organic electroactive device systems fabricated with the SWNT-FE, and methods for making same. The SWCNT can be replaced by other types of nanotubes. The SWCNT film can be obtained by filtering SWCNT solution onto the surface of an anodized alumina membrane. A freestanding flexible SWCNT film can be collected by breaking up this brittle membrane. The conductivity of this SWCNT film can advantageously be higher than 280 S/cm. An electroactive polymer (EAP) actuator layered with the SWNT-FE shows a higher electric field-induced strain than an EAP layered with metal electrodes because the flexible SWNT-FE relieves the restraint of the displacement of the polymeric active layer as compared to the metal electrode. In addition, if thin enough, the SWNT-FE is transparent in the visible light range, thus making it suitable for use in actuators used in optical devices.

Kang, Jin Ho↗
NASA NTRS2018

Methods for Making an Electroactive Device Fabricated with a Nanotube Film Electrode

Disclosed is a single wall carbon nanotube (SWCNT) film electrode (FE), all-organic electroactive device systems fabricated with the SWNT-FE, and methods for making same. The SWCNT can be replaced by other types of nanotubes. The SWCNT film can be obtained by filtering SWCNT solution onto the surface of an anodized alumina membrane. A freestanding flexible SWCNT film can be collected by breaking up this brittle membrane. The conductivity of this SWCNT film can advantageously be higher than 280 S/cm. An electroactive polymer (EAP) actuator layered with the SWNT-FE shows a higher electric field-induced strain than an EAP layered with metal electrodes because the flexible SWNT-FE relieves the restraint of the displacement of the polymeric active layer as compared to the metal electrode. In addition, if thin enough, the SWNT-FE is transparent in the visible light range, thus making it suitable for use in actuators used in optical devices.

Kang, Jin Ho↗
DOE OSTI2025

Dry electrodes with a printed cellulose–graphene ink for low-profile strain sensors in electromyography

Dihydrolevoglucosenone, commonly known as Cyrene, is a renewable and fully biodegradable cellulose-waste derived, environmentally friendly solvent, presenting a non-toxic alternative to N-methyl-2-pyrrolidone (NMP). Currently, solution-based processing of graphene and other similar van der Waals solids favor toxic solvents such as NMP, limiting their use for biosensing. However, with the use of Cyrene, bio-compatible printable devices are possible, and studies have already demonstrated its use in temperature and other biosensing methods through screen-printing. Screen-printing unfortunately often requires masks that constrain the minimum acquirable feature size to be above hundreds of centimeters and wastes material, adding to process complexity and cost. Conversely, inkjet-printing is an attractive alternative for the maskless patterning of hierarchically assembled structures, with micron length scales attainable. Graphene's high conductivity positions it ideally for long-wear sensors such as dry electrodes or respiration monitors. Here, we demonstrate the potential of Cyrene-based graphene inks through few-layer inkjet printing on flexible substrates for the first time, to produce non-toxic conductors toward a strain-mediated mechanism for biosensing, used to detect bodily motion for wearable electronics. The challenges overcome in this study include engineering ink chemistry and printing parameters such that Cyrene's relatively high viscosity compared to typical inkjet solvents, still allows for droplet ejection in a conventional material printer, yielding well-resolved clean line-edges in contrast to other solvents that exhibit diffuse line-edges possibly from stray droplets and ink-splashing. Temperature-dependent transport measurements on the inkjet-printed Cyrene-based graphene films showed the conductivity to be largely temperature-invariant but at lower temperatures below 100 K, conductivity decreased, likely as a result of increased inter-membrane separation arising from thermal contraction. Additionally, temperature-dependent Raman spectroscopy showed the red-shift in the G-band, 2D-band and D-band peaks, as temperature increased. As a result, by validating flexion motion detection of the proximal interphalangeal joint demonstrated in this study, our work is the first of its kind to successfully additively manufacture inkjet-printed Cyrene-based graphene strain sensors on flexible substrates for bio-sensing and wearables.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Active Thermal Isolation For Hot-Film Anemometers

Local heating compensates for conduction of heat from sensors into modules. Two hot-film sensors stacked on wind-tunnel model. Outer sensor detects changes in boundary-layer flow. Inner sensor provides active thermal isolation between outer sensor and model. Thermal boundary condition controlled at response time of detection hot-film sensor, significantly less than response time of internally heated model. Requires less power to maintain outer hot-film sensor at given temperature, enabling system to respond over greater dynamic range before power limits of instrument reached. Stacked sensors bonded to surface of most wind-tunnel models, even to curved surfaces, and removed after completion of experiments.

Martinson, Scott D.↗
DOE OSTI2023

Universal Conductance Fluctuations in a MnBi 2 Te 4 Thin Film

Quantum coherence of electrons can produce striking behaviors in mesoscopic conductors, including weak localization and the Aharonov-Bohm effect. Although magnetic order can also strongly affect transport, the combination of coherence and magnetic order has been largely unexplored. Here, we examine quantum coherence-driven universal conductance fluctuations in the antiferromagnetic, canted antiferromagnetic, and ferromagnetic phases of a thin film of the topological material MnBi 2 Te 4 . In each magnetic phase we extract a charge carrier phase coherence length of about 100 nm. The conductance magnetofingerprint is repeatable when sweeping applied magnetic field within one magnetic phase, but changes when the applied magnetic field crosses the antiferromagnetic/canted antiferromagnetic magnetic phase boundary. Surprisingly, in the antiferromagnetic and canted antiferromagnetic phase, but not in the ferromagnetic phase, the magnetofingerprint depends on the direction of the field sweep. Finally, to explain these observations, we suggest that conductance fluctuation measurements are sensitive to the motion and nucleation of magnetic domain walls in MnBi 2 Te 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗