SEARCH · Search NASA

Results for “conductive thin films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Modeling of planar quasi-TEM superconducting transmission lines

An application of the phenomenological loss equivalence method (Lee and Itoh, 1989) in modeling the microwave behavior of planar quasi-TEM superconducting transmission lines is presented. For validation of the model, data are used from measurements of a YBCO superconducting thin-film coplanar-waveguide lowpass filter on a lanthanum aluminate substrate. Measured and modeled S-parameters of an existing superconducting coplanar waveguide lowpass filter agree to within 0.3 dB in magnitude and 0.5 radians in phase. Extracted values for penetration depth and real part of the conductivity of the superconducting film are within 10 percent of other researchers' findings.

Antsos, Dimitrios↗

NASA NTRS2003

Microchemical and Gaseous Sensors Using Carbon Nanotubes and MEMS Fabrication Technology

The objective of this research is to use a combination of carbon nanotubes and silicon-based microfabrication and micromachining processes to produce unique micro-sized chemical and gaseous sensors. Polished quartz substrate is used. Interdigitated structure is used for the sensing elements. Metallic catalysts for the growth of the carbon nanotube include copper, iron, nickel, and cobalt. Various thicknesses of the metallic catalysts are used in this study varying between 5 to 20 microns. Depositing of the metallic catalyst is accomplished using an ion-beam sputtering thin film technique and a shadow mask. Single wall carbon nanotubes are successfully formed over the metallic catalyst layer. Preliminary measurements of the carbon nanotubes show this nanotube contained film over the sensing elements which had a resistance value of 400 ohms at room temperature. This is a more conductive film comparing to metal oxide films, such as SnO2 or ZnO, that are now widely used in gaseous sensor research. Evaluation of the carbon nanotube film for potential gaseous sensing will be carried out.

Liu, Chung-Chiun↗

NASA NTRS1977

Properties of TiO2 thin films and a study of the TiO2-GaAs interface

Titanium dioxide (TiO2) films prepared by chemical vapor deposition were investigated in this study for the purpose of the application in the GaAs metal-insulator-semiconductor field-effect transistor. The degree of crystallization increases with the deposition temperature. The current-voltage study, utilizing an Al-TiO2-Al MIM structure, reveals that the d-c conduction through the TiO2 film is dominated by the bulk-limited Poole-Frenkel emission mechanism. The dependence of the resistivity of the TiO2 films on the deposition environment is also shown. The results of the capacitance-voltage study indicate that an inversion layer in an n-type substrate can be achieved in the MIS capacitor if the TiO2 films are deposited at a temperature higher than 275 C. A process of low temperature deposition followed by the pattern definition and a higher temperature annealing is suggested for device fabrications. A model, based on the assumption that the surface state densities are continuously distributed in energy within the forbidden band gap, is proposed to interpret the lack of an inversion layer in the Al-TiO2-GaAs MIS structure with the TiO2 films deposited at 200 C.

Chen, C. Y.↗

NASA NTRS1983

Testing of felt-ceramic materials for combustor applications

The feasibility of using composite felt ceramic materials as combustor liners was experimentally studied. The material consists of a porous felt pad sandwiched between a layer of ceramic and one of solid metal. Flat, rectangular test panels, which encompassed several design variations of the basic composite material, were tested, two at a time, in a premixed gas turbine combustor as sections of the combustor wall. Tests were conducted at combustor inlet conditions of 0.5 MPa and 533 K with a reference velocity of 25 m/s. The panels were subjected to a hot gas temperature of 2170 K with 1% of the total airflow used to film cool the ceramic surface of the test panel. In general, thin ceramic layers yield low ceramic stress levels with high felt ceramic interface temperatures. On the other hand, thick ceramic layers result in low felt ceramic interface temperatures but high ceramic stress levels. Extensive thermal cycling appears to cause material degradation, but for a limited number of cycles, the survivability of felt ceramic materials, even under extremely severe combustor operating conditions, was conclusively demonstrated.

Venkat, R. S.↗

NASA NTRS1989

Electrodes For Alkali-Metal Thermoelectric Converters

Combination of thin, porous electrode and overlying collector grid reduces internal resistance of alkali-metal thermoelectric converter cell. Low resistance of new electrode and grid boosts power density nearly to 1 W/cm2 of electrode area at typical operating temperatures of 1,000 to 1,300 K. Conductive grid encircles electrode film on alumina tube. Bus wire runs along tube to collect electrical current from grid. Such converters used to transform solar, nuclear, and waste heat into electric power.

Williams, Roger M.↗

NASA NTRS2001

Study of Electrical Contacts and Devices in Advanced Semiconductors

Research conducted at Tuskegee University concentrates on electrical contacts to GaN films and their characterization with the objective of understanding contact formation and realizing low-resistance metal contacts. Contact properties are known to be strongly related to surface preparation. It appears that the as-received material had a thin oxide film on the surface of the GaN film. Various cleaning treatments were employed in order to render the surface contamination free and removal of the oxide film. Metal films were then deposited by e-beam evaporation. Electrical characteristics of these contacts indicated that the optimal treatment was an organic solvent cleaning followed by etching in buffered oxide solution. Contacts established with Al were observed to be ohmic in nature, whereas Au, Cr, Ti, and Pt exhibit rectifying contacts. Platinum contacts were almost ideal as shown by an ideality factor of 1.02.

Hall, H. P.↗

NASA NTRS2015

Synthesis and Properties of Cross-Linked Polyamide Aerogels

We report the first synthesis of cross-linked polyamide aerogels through step growth polymerization using a combination of diamines, diacid chloride and triacid chloride. Polyamide oligomers endcapped with amines are prepared as stable solutions in N-methylpyrrolidinone from several different diamine precursors and 1,3-benzenedicarbonyl dichloride. Addition of 1,3,5-benzenetricarbonyl trichloride yields gels which form in under five minutes according to the scheme shown. Solvent exchange of the gels into ethanol, followed by drying using supercritical CO2 extraction gives colorless aerogels with densities around 0.1 to 0.2 gcm3. Thicker monolithes of the polyamide aerogels are stiff and strong, while thin films of certain formulations are highly flexible, durable, and even translucent. These materials may have use as insulation for deployable space structures, rovers, habitats or extravehicular activity suits as well as in many terrestrial applications. Strucure property relationships of the aerogels, including surface area, mechanical properties, and thermal conductivity will be discussed.

Aerogel↗

NASA NTRS1990

Design and test of a compact optics system for the pool boiling experiment

The experiment described seeks to improve the understanding of the fundamental mechanisms that constitute nucleate pool boiling. The vehicle for accomplishing this is an investigation, including tests to be conducted in microgravity and coupled with appropriate analyses, of the heat transfer and vapor bubble dynamics associated with nucleation, bubble growth/collapse and subsequent motion, considering the interrelations between buoyancy, momentum and surface tension which will govern the motion of the vapor and surrounding liquid, as a function of the heating rate at the heat transfer surface and the temperature level and distribution in the bulk liquid. The experiment is designed to be contained within the confines of a Get-Away-Special Canister (GAS Can) installed in the bay of the space shuttle. When the shuttle reaches orbit, the experiment will be turned on and testing will proceed automatically. In the proposed Pool Boiling Experiment a pool of liquid, initially at a precisely defined pressure and temperature, will be subjected to a step imposed heat flux from a semitransparent thin-film heater forming part of one wall of the container such that boiling is initiated and maintained for a defined period of time at a constant pressure level. Transient measurements of the heater surface and fluid temperatures near the surface will be made, noting especially the conditions at the onset of boiling, along with motion photography of the boiling process in two simultaneous views, from beneath the heating surface and from the side. The conduct of the experiment and the data acquisition will be completely automated and self-contained. For the initial flight, a total of nine tests are proposed, with three levels of heat flux and three levels of subcooling. The design process used in the development and check-out of the compact photographic/optics system for the Pool Boiling Experiment is documented.

Ling, Jerri S.↗

NASA NTRS1976

A film-rupture model of hydrogen-induced, slow crack growth in acicular alpha-beta titanium

A study has been conducted of the terrace-like fracture morphology of gaseous hydrogen-induced crack growth in acicular alpha-beta titanium alloys in terms of specimen configuration, magnitude of applied stress intensity, test temperature, and hydrogen pressure. Although the overall appearance of the terrace structure remained essentially unchanged, a distinguishable variation is found in the size of the individual terrace steps, and step size is found to be inversely dependent upon the rate of hydrogen-induced slow crack growth. This inverse relationship is independent of all the variables investigated. These observations are quantitatively discussed in terms of the formation and growth of a thin hydride film along the alpha-beta boundaries and a qualitative model for hydrogen-induced slow crack growth is presented, based on the film-rupture model of stress corrosion cracking.

Nelson, H. G.↗

NASA NTRS1987

Alkali metal thermoelectric converter (AMTEC) electrode lifetime studies

Experimental studies are being conducted at JPL to identify long life, high area power density electrodes for AMTEC. Power versus time measurements are being made in a demountable electrode test cell and, for longer term experiments, a self-contained recirculating cell. The experimental apparatus and procedures are described in detail. The results show that thin film molybdenum electrodes can be designed to produce power near 0.5 W/sq cm for over two hundred hours. Also, platinum/tungsten electrodes exhibit power densities that are stable near 0.5 W/sq cm. If the performance of these electrodes is verified for longer periods (thousands of hours), then practical AMTEC systems will be possible.

Bankston, C. Perry↗

NASA NTRS1989

Fracture characteristics of balloon films

An attempt was made to determine the failure modes of high altitude scientific balloons through an investigation of the fracture characteristics of the thin polyethylene films. Two films were the subject of the evaluation, Winzen Int.'s Stratafilm SF-85 and Raven Industries' Astro-E. Research began with an investigation of the film's cold brittleness point and it's effect on the ultimate strength and elasticity of the polyethylene film. A series of preliminary investigations were conducted to develop an understanding of the material characteristics. The primary focus of this investigation was on the notch sensitivity of the films. Simple stress strain tests were also conducted to enable analysis employing fracture toughness parameters. Studies were conducted on both film types at 23 C (room temperature), -60 C, -90 C, and -120 C.

Portanova, Marc A.↗

NASA NTRS1993

Aerodynamic heating in hypersonic flows

Aerodynamic heating in hypersonic space vehicles is an important factor to be considered in their design. Therefore the designers of such vehicles need reliable heat transfer data in this respect for a successful design. Such data is usually produced by testing the models of hypersonic surfaces in wind tunnels. Most of the hypersonic test facilities at present are conventional blow-down tunnels whose run times are of the order of several seconds. The surface temperatures on such models are obtained using standard techniques such as thin-film resistance gages, thin-skin transient calorimeter gages and coaxial thermocouple or video acquisition systems such as phosphor thermography and infrared thermography. The data are usually reduced assuming that the model behaves like a semi-infinite solid (SIS) with constant properties and that heat transfer is by one-dimensional conduction only. This simplifying assumption may be valid in cases where models are thick, run-times short, and thermal diffusivities small. In many instances, however, when these conditions are not met, the assumption may lead to significant errors in the heat transfer results. The purpose of the present paper is to investigate this aspect. Specifically, the objectives are as follows: (1) to determine the limiting conditions under which a model can be considered a semi-infinite body; (2) to estimate the extent of errors involved in the reduction of the data if the models violate the assumption; and (3) to come up with correlation factors which when multiplied by the results obtained under the SIS assumption will provide the results under the actual conditions.

Reddy, C. Subba↗

NASA NTRS1975

An investigation in MSFC 14-inch TWT to determine the static stability characteristics of 0.004-scale model (74-OTS) space shuttle vehicle 5 configuration (IA33), volume 1

Wind tunnel tests were conducted to: (1) determine the static stability characteristics of the Shuttle Vehicle 5 configuration; (2) determine the effect on the Vehicle 5 aerodynamic characteristics of External Tank (ET) and Solid Rocket Booster (SRB) nose shape, SRB nozzle shroud flare angle, orbiter to tank fairing, and sting location; (3) provide flow visualization using thin film oil paint; and (4) determine rudder, body flap, and inboard and outboard elevon hinge moments. The mated vehicle model was mounted in three different ways: (1) the orbiter mounted on the balance with the SRB's attached to the tank and the tank in turn attached to the orbiter; (2) the tank mounted on the balance (with the sting protruding through the tank base) with the SRB's and orbiter attached to the tank, and (3) with the tank mounted on the balance and the balance in turn supported by a forked sting entering the nozzle of each SRB, extending forward into the SRB's then crossing over to the tank to provide a balance socket. Data were obtained for Mach numbers from 0.6 through 4.96 at angles-of-attack and -sideslip from -10 to 10 degrees.

Allen, E. C.↗

NASA NTRS1978

The MOM tunneling diode - Theoretical estimate of its performance at microwave and infrared frequencies

A theoretical analysis of the metal-oxide-metal (MOM) antenna/diode as a detector of microwave and infrared radiation is presented with the experimental verification conducted in the far infrared. It is shown that the detectivity at room temperature can be as high as 10 to the 10th per W Hz exp 1/2 at frequencies of 10 to the 14th Hz in the infrared. As a result, design guidelines are obtained for the lithographic fabrication of thin-film MOM structures that are to operate in the 10-micron region of the infrared spectrum.

Sanchez, A.↗

NASA NTRS2003

Development of Highly-Conductive Polyelectrolytes for Lithium Batteries

Future NASA and Air Force missions require reliable and safe sources of energy with high specific energy and energy density that can provide thousands of charge-discharge cycles at more than 40% depth- of-discharge and that can operate at low temperatures. All solid-state batteries have substantial advantages with respect to stability, energy density, storage fife and cyclability. Among all solid-state batteries, those with flexible polymer electrolytes offer substantial advantages in cell dimensionality and commensurability, low temperature operation and thin film design. The above considerations suggest that lithium-polymer electrolyte systems are promising for high energy density batteries and should be the systems of choice for NASA and US Air Force applications. Polyelectrolytes (single ion conductors) are among most promising avenues for achieving a major breakthrough 'in the applicability of polymer- based electrolyte systems. Their major advantages include unit transference number for the cation, reduced cell polarization, minimal salt precipitation, and favorable electrolyte stability at interfaces. Our research is focused on synthesis, modeling and cell testing of single ion carriers, polyelectrolytes. During the first year of this project we attempted the synthesis of two polyelectrolytes. The synthesis of the first one, the poly(ethyleneoxide methoxy acrylateco-lithium 1,1,2-trifluorobutanesulfonate acrylate, was attempted few times and it was unsuccessful. We followed the synthetic route described by Cowie and Spence. The yield was extremely low and the final product could not be separated from the impurities. The synthesis of this polyelectrolyte is not described in this report. The second polyelectrolyte, comb polysiloxane polyelectrolyte containing oligoether and perfluoroether sidechains, was synthesized in sufficient quantity to study the range of properties such as thermal stability, Li- ion- conductivity and stability toward lithium metal. Also, the batteries containing this polyelectrolyte were assembled and tested. The results are detailed below. The synthesis of another polyelectrolyte similar to polysiloxane polyelectrolyte has been started, however, the synthesis was not completed due to termination of the project.

Shriver, D. F.↗

NASA NTRS2019

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan's stratosphere by the Cassini Composite InfraRed Spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30-160 K) were collected from 50 cm1 to 11,700 cm1 (200-0.85 m). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in pre- viously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and < 140 K. Our findings corro- borate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan's observed Haystack emission feature. In order to understand and identify the Haystack cloud, we have initiated co-de- position experiments that incorporate mixtures of Titan-relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited ternary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co- condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan's stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Nna-Mvondo, Delphine↗

NASA NTRS2019

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan’s stratosphere by the Cassini Composite InfraRed Spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30 – 160 K) were collected from 50 cm(exp -1) to 11700 cm(exp -1) (200 – 0.85 μm). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in previously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and less than 140 K. Our findings corroborate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan’s observed Haystack emission feature. As a result, we have initiated co-deposition experiments that incorporate mixtures of Titan relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited trinary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co-condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan’s stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Delphine Nna-Mvondo↗

NASA NTRS2019

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan's stratosphere by the Cassini Composite InfraRed spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30–160 K) were collected from 50 cm(exp −1) to 11,700 cm(exp −1) (200–0.85 μm). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in previously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and <140 K. Our findings corroborate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan's observed Haystack emission feature. In order to understand and identify the Haystack cloud, we have initiated co-deposition experiments that incorporate mixtures of Titan-relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited ternary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co-condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan's stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Delphine Nna-Mvondo↗