Search NASA⌕ Search

SEARCH · Search NASA

Results for “controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The optimal control of merging aircraft - Implementation of the hybrid air traffic controller.

The control of merging aircraft is formulated as a finite-time, quadratic optimal control problem of a linear system with state and control constraints. The purpose of this paper is to demonstrate that the Hybrid Air Traffic Controller (HAC), which has been previously developed as a solution to this problem, may be easily implemented. Use is made of both the properties of the algebraic solution to the matrix Riccati equation and the structure of the linear model. This approach results in a real-time synthesis procedure for the HAC which does not rely on iterative numerical integration techniques.

Schatz, J. G.↗
NASA NTRS1973

Application of modern control theory to the design of optimum aircraft controllers

The synthesis procedure presented is based on the solution of the output regulator problem of linear optimal control theory for time-invariant systems. By this technique, solution of the matrix Riccati equation leads to a constant linear feedback control law for an output regulator which will maintain a plant in a particular equilibrium condition in the presence of impulse disturbances. Two simple algorithms are presented that can be used in an automatic synthesis procedure for the design of maneuverable output regulators requiring only selected state variables for feedback. The first algorithm is for the construction of optimal feedforward control laws that can be superimposed upon a Kalman output regulator and that will drive the output of a plant to a desired constant value on command. The second algorithm is for the construction of optimal Luenberger observers that can be used to obtain feedback control laws for the output regulator requiring measurement of only part of the state vector. This algorithm constructs observers which have minimum response time under the constraint that the magnitude of the gains in the observer filter be less than some arbitrary limit.

Power, L. J.↗
NASA NTRS1972

Multivariable control theory applied to hierarchial attitude control for planetary spacecraft

Multivariable control theory is applied to the design of a hierarchial attitude control system for the CARD space vehicle. The system selected uses reaction control jets (RCJ) and control moment gyros (CMG). The RCJ system uses linear signal mixing and a no-fire region similar to that used on the Skylab program; the y-axis and z-axis systems which are coupled use a sum and difference feedback scheme. The CMG system uses the optimum steering law and the same feedback signals as the RCJ system. When both systems are active the design is such that the torques from each system are never in opposition. A state-space analysis was made of the CMG system to determine the general structure of the input matrices (steering law) and feedback matrices that will decouple the axes. It is shown that the optimum steering law and proportional-plus-rate feedback are special cases. A derivation of the disturbing torques on the space vehicle due to the motion of the on-board television camera is presented. A procedure for computing an upper bound on these torques (given the system parameters) is included.

Boland, J. S., III↗
NASA NTRS1972

The optimal control of merging aircraft-derivation of the hybrid air traffic controller.

The Federal Aviation Administration has initiated a program to automate its existing manual air traffic handling procedures. One procedure, whose automation is expected to increase controller efficiency by 2.6 to 2.9 times, is known as aircraft merging. This procedure is concerned with the merging of N aircraft, which are distributed among K feeder routes, into one or more final routes. The question of obtaining an exactly realizable and easily implementable automatic controller for merging is discussed. The optimal control of a linear system with state and control constraints is considered.

Schatz, J. G.↗
NASA NTRS1973

Sensitivity of optimal control systems with bang-bang control.

The effects of small parameter variations on the performance index of optimal control systems with initial and final target manifolds, free end time, and bang-bang control are analyzed in this paper. A new approach to the sensitivity equation is presented. This approach takes into account the pulse-shaped variation produced by the parameter change on the bang-bang control. An expression, that relates the variations of the performance index, the trajectory, the final time, and the parameter, is derived. This expression extends to the class of optimal systems with bang-bang control, a result previously obtained by Courtin and Rootenberg (1971).

Rootenberg, J.↗
NASA NTRS1974

Control system design using frequency domain models and parameter optimization, with application to supersonic inlet controls

A technique is described for designing feedback control systems using frequency domain models, a quadratic cost function, and a parameter optimization computer program. FORTRAN listings for the computer program are included. The approach is applied to the design of shock position controllers for a supersonic inlet. Deterministic or random system disturbances, and the presence of random measurement noise are considered. The cost function minimization is formulated in the time domain, but the problem solution is obtained using a frequency domain system description. A scaled and constrained conjugate gradient algorithm is used for the minimization. The approach to a supersonic inlet included the calculations of the optimal proportional-plus integral (PI) and proportional-plus-integral-plus-derivative controllers. A single-loop PI controller was the most desirable of the designs considered.

Seidel, R. C.↗
NASA NTRS1975

Apollo experience report: Guidance and control systems. Mission control programmer for unmanned missions AS-202, Apollo 4, and Apollo 6

An unmanned test flight program required to evaluate the command module heat shield and the structural integrity of the command and service module/Saturn launch vehicle is described. The mission control programer was developed to provide the unmanned interface between the guidance and navigation computer and the other spacecraft systems for mission event sequencing and real-time ground control during missions AS-202, Apollo 4, and Apollo 6. The development of this unmanned programer is traced from the initial concept through the flight test phase. Detailed discussions of hardware development problems are given with the resulting solutions. The mission control programer functioned correctly without any flight anomalies for all missions. The Apollo 4 mission control programer was reused for the Apollo 6 flight, thus being one of the first subsystems to be reflown on an Apollo space flight.

Holloway, G. F.↗
NASA NTRS1975

Apollo experience report: Guidance and control systems: Automated control system for unmanned mission AS-201

The Apollo command module heat shield and Apollo command and service module/Saturn launch vehicle structural integrity were evaluated in an unmanned test flight. An automated control system was developed to provide the mission event sequencing, the real-time ground control interface, and the backup attitude reference system for the unmanned flight. The required mission events, the design logic, the redundancy concept, and the ground-support-equipment concept are described and some development problem areas are discussed. The mission event time line and the real-time ground command list are included to provide an outline of the control system capabilities and requirements. The mission was accomplished with the automated control system, which functioned without flight anomalies.

Holloway, G. F.↗
NASA NTRS1977

F100 multivariable control synthesis program: Evaluation of a multivariable control using a real-time engine simulation

The design, evaluation, and testing of a practical, multivariable, linear quadratic regulator control for the F100 turbofan engine were accomplished. NASA evaluation of the multivariable control logic and implementation are covered. The evaluation utilized a real time, hybrid computer simulation of the engine. Results of the evaluation are presented, and recommendations concerning future engine testing of the control are made. Results indicated that the engine testing of the control should be conducted as planned.

Szuch, J. R.↗
NASA NTRS1978

Impingement effect of service module reaction control system engine plumes. Results of service module reaction control system plume model force field application to an inflight Skylab mission proximity operation situation with the inflight Skylab response

Plume impingement effects of the service module reaction control system thruster firings were studied to determine if previous flight experience would support the current plume impingement model for the orbiter reaction control system engines. The orbiter reaction control system is used for rotational and translational maneuvers such as those required during rendezvous, braking, docking, and station keeping. Therefore, an understanding of the characteristics and effects of the plume force fields generated by the reaction control system thruster firings were examined to develop the procedures for orbiter/payload proximity operations.

Lobb, J. D., Jr.↗
NASA NTRS1978

An experimental wind-tunnel investigation of a ram-air-spoiler roll-control device on a forward-control missile at supersonic speeds

A parametric experimental wind-tunnel investigation was made at supersonic Mach numbers to provide design data on a ram-air-spoiler roll-control device that is to be used on forward-control cruciform missile configurations. The results indicate that the ram-air-spoiler tail fin is an effective roll-control device and that roll control is generally constant with vehicle attitude and Mach number unless direct canard and/or forebody shock impingement occurs. The addition of the ram-air-spoiler tail fins resulted in only small changes in aerodynamic-center location. For the ram-air-spoiler configuration tested, there are large axial force coefficient effects associated with the increased fin thickness and ram-air momentum loss.

Blair, A. B., Jr.↗
NASA NTRS1979

Controllability of delay systems with restrained controls

Using a geometric growth condition, both the function space and Euclidean controllability of a nonlinear delay system which has a compact and convex control set are characterized. This extends analogous results for ordinary differential systems, and it yields conditions under which perturbed nonlinear delay controllable systems are controllable.

Chukwu, E. N.↗
NASA NTRS1980

Propulsion control and control theory: A new research focus

Technological developments necessary for the implementation of advanced digital control concepts for aircraft propulsion are identified and discussed. Developments associated with the replacement analog controllers with digital control systems, sensors and actuators, and control modes and software are reported.

Zeller, J. R.↗
NASA NTRS1980

Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 2, appendix A: Selected DSG technologies and their general control requirements

A consistent approach was sought for both hardware and software which will handle the monitoring and control necessary to integrate a number of different DSG technologies into a common distribution dispatch network. It appears that the control of each of the DSG technologies is compatible with a supervisory control method of operation that lends itself to remote control from a distribution dispatch center.

Source record↗
NASA NTRS1979

Human controller modeling in environments that include non-control tasks

In complex environments where the human operator is a supervisor, he must allocate his attention between different kinds of tasks for optimum overall performance. When a portion of the future reference trajectory for the control task is available for preview, scheduling various activities is possible. A model has been developed for this situation using dynamic programming to solve an optimal control problem. An experiment was conducted where subjects controlled an airplane symbol over a map, shown a fixed distance into the future. Discrete, non-control tasks were introduced as number entry tasks. Results from the model are compared with experimental results.

Govindaraj, T.↗
NASA NTRS1981

Application of a tip-fin controller to the Shuttle Orbiter for improved yaw control

Aerodynamic and flight control analyses have shown that the application of the tip-fin controller and removal of the centerline vertical tail does not produce improved flyability of the Shuttle Orbiter in the supersonic speed regime. Preliminary design studies show that removal of the centerline vertical tail and the installation of tip-fin controllers could result in savings up to 900 kg. It is also shown that the reaction control system could be deactivated much sooner than it is possible with the present nominal orbiter configuration.

Powell, R. W.↗
NASA NTRS1984

Optimal cooperative control synthesis applied to a control-configured aircraft

A multivariable control augmentation synthesis method is presented that is intended to enable the designer to directly optimize pilot opinion rating of the augmented system. The approach involves the simultaneous solution for the augmentation and predicted pilot's compensation via optimal control techniques. The methodology is applied to the control law synthesis for a vehicle similar to the AFTI F16 control-configured aircraft. The resulting dynamics, expressed in terms of eigenstructure and time/frequency responses, are presented with analytical predictions of closed loop tracking performance, pilot compensation, and other predictors of pilot acceptance.

Schmidt, D. K.↗