Search NASA⌕ Search

SEARCH · Search NASA

Results for “crater morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Concentric crater fill on Mars - An aeolian alternative to ice-rich mass wasting

Concentric crater fill, a distinctive martian landform represented by a concentric pattern of surface undulations confined within a crater rim, has been interpreted as an example of ice-enhanced regolith creep at midlatitudes (e.g., Squyres and Carr, 1986). Theoretical constraints on the stability and mobility of ground ice limit the applicability of an ice-rich soil in effectively mobilizing downslope movement at latitudes poleward of + or - 30 deg, where concentric crater fill is observed. High-resolution images of concentric crater fill material in the Utopia Planitia region (45 deg N, 271 deg W) show it to be an eroded, multiple-layer deposit. Layering should not be preserved if the crater fill material moved by slow deformation throughout its thickness, as envisioned in the ice-enhanced creep model. Multiple layers are also exposed in the plains material surrounding the craters, indicating a recurrent depositional process that was at least regional in extent. Mantling layers are observed in high-resolution images of many other locations around Mars, suggesting that deposition occurred on a global scale and was not limited to the Utopia Planitia region. It is suggested that an aeolian interpretation for the origin and modification of concentric crater fill material is most consistent with morphologic and theoretical constraints.

Zimbelman, J. R.↗
NASA NTRS1994

The intact capture of hypervelocity dust particles using underdense foams

The impact of a hypervelocity projectile (greater than 3 km/s) is a process that subjects both the impactor and the impacted material to a large transient pressure distribution. The resultant stresses cause a large degree of fragmentation, melting, vaporization, and ionization (for normal densities). The pressure regime magnitude, however, is directly related to the density relationship between the projectile and target materials. As a consequence, a high-density impactor on a low-density target will experience the lowest level of damage. Historically, there have been three different approaches toward achieving the lowest possible target density. The first employs a projectile impinging on a foil or film of moderate density, but whose thickness is much less than the particle diameter. This results in the particle experiencing a pressure transient with both a short duration and a greatly reduced destructive effect. A succession of these films, spaced to allow nondestructive energy dissipation between impacts, will reduce the impactor's kinetic energy without allowing its internal energy to rise to the point where destruction of the projectile mass will occur. An added advantage to this method is that it yields the possibility of regions within the captured particle where a minimum of thermal modification has taken place. Polymer foams have been employed as the primary method of capturing particles with minimum degradation. The manufacture of extremely low bulk density materials is usually achieved by the introduction of voids into the material base. It must be noted, however, that a foam structure only has a true bulk density of the mixture at sizes much larger than the cell size, since for impact processes this is of paramount importance. The scale at which the bulk density must still be close to that of the mixture is approximately equal to the impactor. When this density criterion is met, shock pressures during impact are minimized, which in turn maximizes the probability of survival for the impacting particle. The primary objectives of the experiment are to (1) Examine the morphology of primary and secondary hypervelocity impact craters. Primary attention will be paid to craters caused by ejecta during hypervelocity impacts of different substrates. (2) Determine the size distribution of ejecta by means of witness plates and collect fragments of ejecta from craters by means of momentum-sensitive mcropore foam. (3) Assess the directionality of the flux by means of penetration-hole alignment of thin films placed above the cells. (4) Capture intact the particles that perforated the thin film and entered the cell. Capture media consisted of both previously flight-tested micropore foams and aerogel. The foams had different latent heats of fusion and, accordingly, will capture particles over a range of momenta. Aerogel was incorporated into the cells to determine the minimum diameter than can be captured intact.

Maag, Carl R.↗
NASA NTRS2003

Gusev and Meridiani Will Look Different: Radar Scattering Properties of the Mars Exploration Rover Landing Sites

Analysis of all existing radar data for the two Mars Exploration Rover (MER) landing sites at Meridiani Planum and Gusev Crater suggest that their meter-scale morphological appearance will be noticeably different than previous Mars landing sites; their human-scale, decimeter-to meter-scale roughness is not the same as for previous Mars landing sites. We make this prediction based on a comparison of the MER landing sites.

A F C Haldemann↗
NASA NTRS2005

Lunar and Planetary Science XXXVI, Part 16

Contents include the folowing: Experimental Study of Fe-, Co- and Ni-partitioning Between Forsterite and low-Co Fe,Ni-Alloys: Implications for Formation of Olivine Condensates in Equilibrium with Primitive Metal. Channels and Fan-like Features on Titan Surface Imaged by the Cassini RADAR. The Oxygen Isotope Similarity of the Earth and Moon: Source Region or Formation Process? The Mn-53-Cr-53 System in CAIs: An Update. Comparative Planetary Mineralogy: Valence State Partitioning of Cr, Fe, Ti, and V Among Crystallographic Sites in Olivine, Pyroxene, and Spinel from Planetary Basalts. CAI Thermal History Constraints from Spinel: Ti Zoning Profiles and Melilite Boundary Clinopyroxenes. Noble Gas Study of New Enstatite SaU 290 with High Solar Gases. A Marine Origin for the Meridiani Planum Landing Site? A Mechanism for the Formation and Evolution of Tharsis as a Consequence of Mantle Overturn: Large Scale Lateral Heterogeneity in a Stably Stratified Mantle. Endolithic Colonization of Fluid Inclusion Trails in Mineral Grains. Microbial Preservation in Sulfates in the Haughton Impact Structure Suggests Target in Search for Life on Mars. Ascraeus Mons Fan-shaped Deposit, Mars: Geological History and Volcano-Ice Interactions of a Cold-based Glacier. Weathering Pits in the Antarctic Dry Valleys: Insolation-induced Heating and Melting, and Applications to Mars. Mineralogy and Petrography of Lunar Mare Regolith Breccia Meteorite MET 01-210. Geological Mapping of Ganymede. A Quantitative Analysis of Plate Motion on Europa: Implications for the Role of Rigid vs. Nonrigid Behavior of the Lithosphere. Comparison of Terrestrial Morphology, Ejecta, and Sediment Transport of Small Craters: Volcanic and Impact Analogs to Mars. An Integrated Study of OMEGA-Identified Mineral Deposits in Eastern Hebes Chasma, Mars. Global Spectral and Compositional Diversity of Mars: A Test of CRISM Global Mapping with Mars Express OMEGA Data. On Origin of Sedna. Processing ISS Images of Titan s Surface. LA-ICP-MS Study of Trace Elements in the Chaunskij Metal.

Source record↗
NASA NTRS2008

Geologic Mapping of the V-36 Thetis Regio Quadrangle: 2008 Progress Report

As a result of mapping, eleven material stratigraphic units and three structural units have been identified and mapped. The material units include (from older to younger): tessera terrain material (tt), material of densely fractured plains (pdf), material of fractured and ridged plains (pfr), material of shield plains (psh), material of plains with wrinkle ridges (pwr), material of smooth plains of intermediate brightness (psi), material of radardark smooth plains (psd), material of lineated plains (pli) material of lobate plains (plo), material of craters having no radar-dark haloes (c1), and material of craters having clear dark haloes (c2). The morphologies and probably the nature of the material units in the study area are generally similar to those observed in other regions of Venus [2]. The youngest units are lobate plains (plo) which here typically look less lobate than in other areas of the planet. Close to them in age are smooth plains which are indeed smooth and represented by two varieties mentioned above. Lineated plains (pli) are densely fractured in a geometrically regular way. Plains with wrinkle ridges, being morphologically similar to those observed in other regions, here occupy unusually small areas. Shield (psh) plains here are also not abundant. Locally they show wrinkle ridging. Fractured and ridged plains (pfr), which form in other regions, the so called ridge belts, are observed as isolated areas of clusters of ridged plains surrounded by other units. Densely fractured plains (pdf) are present in relatively small areas in association with coronae and corona-like features. Tessera terrain (tt) is dissected by structures oriented in two or more directions. Structures are so densely packed that the morphology (and thus nature) of the precursor terrain is not known. Structural units include tessera transitional terrain (ttt), fracture belts (fb) and rifted terrain (rt). Tessera transitional terrain was first identified and mapped by [4] as areas of fractured and ridged plains (pfr) and densely fractured plains (pdf) deformed by transverse faults that made it formally resemble tessera terrain (tt). The obvious difference between units tt and ttt is the recognizable morphology of precursor terrain of unit ttt. Fracture belts are probably ancient rift zones [3]. Rifted terrain (rt), as in other regions of Venus, is so saturated with faults that according to the recommendation of [1, 5] it should be mapped as a structural unit.

Basilevsky, A. T.↗
NASA NTRS2010

Geomorphic Terrains and Evidence for Ancient Volcanism within Northeastern South Pole-Aitken Basin

The interior of the enigmatic South Pole-Aitken Basin has long been recognized as being compositionally distinct from its exterior. However, the source of the compositional anomaly has been subject to some debate. Is the source of the iron-enhancement due to lower-crustal/upper-mantle material being exposed at the surface, or was there some volume of ancient volcanism that covered portions of the basin interior? While several obvious mare basalt units are found within the basin and regions that appear to represent the original basin interior, there are several regions that appear to have an uncertain origin. Using a combination of Clementine and Lunar Orbiter images, several morphologic units are defined based on albedo, crater density, and surface roughness. An extensive unit of ancient mare basalt (cryptomare) is defined and, based on the number of superimposed craters, potentially represents the oldest volcanic materials within the basin. Thus, the overall iron-rich interior of the basin is not solely due to deeply derived crustal material, but is, in part due to the presence of ancient volcanic units.

Petro, Noah↗
NASA NTRS2003

Gusev Meridiani will look different : radar scattering properties of the Mars Exploration Rover landing sites

Analysis of all existing radar data for the two Mars Exploration Rover (MER) landing sites at Meridiani Planum and Gusev Crater suggest that their meter-scale morphological appearance will be noticeably different than previous Mars landing sites; their "human-scale", decimeter- to meter-scal roughness is not the same as for previous Mars landing sites. We make this prediction based on the comparison of the MER landing sites.

Harmon, J. K.↗
NASA NTRSDate not supplied

Regional Paleoenvironments Recorded in Sedimentary Rocks of the Western Fan-Delta, Jezero Crater, Mars.

The Mars 2020 Perseverance rover science team recently completed an investigation of the fan-delta sedimentary sequence [1] and has begun exploration of the crater margin. High resolution chemical, mineralogical, and morphological observations collected with the rover instrument payload provide powerful constraints on rock origins, contextualizing the suite of high-value samples collected as part of the Mars Sample Return campaign.

Mars 2020↗
NASA NTRS1993

Largest impact features on Venus: Non-preserved or non-recognizable?

Conventional explanation of a lack of impact craters with diameters greater than 300 km on Venus is that they formed during the intense bombardment era and had lunar-like morphology, but they are not preserved now because of rapid viscous relaxation of their topograpy and/or high endogenous reworking of surface. Other explanation invokes failure to recognize these larger craters because of their non-lunar-like morphology from the moment of formation, since larger gravity of Venus relatively to the Moon results in that largest craters on Venus may form within the mass of shock melted material while comparably sized lunar craters would be still almost 'dry'. To test this hypothesis, morphologies and rim-crest diameters of the largest peak-ring and Orientale-type basins and all larger impact features on Moon, Mercury, Mars, and Venus were compiled and compared to rim crest diameters of model craters with different melt volume/transient-cavity volume ratios. Results show that the final diameters of model craters formed at depth of melting about twice of transient cavity depth correspond to changeover from a planet-similar morphology of all the smaller basins on any terrestrial planet to a planet-specific morphology of all the larger basins on the Moon, Mercury, and Mars. On Venus, these largest impact features are not found and instead, a Venus-specific morphology of the largest concentric coronae appears in this size range. The coronae were suggested to form over sites of mantle upwelling and modified by subsequent volcanism and gravitational relaxation. The results here suggest that mantle upwelling - the first and necessary step of the corona formation models - may be induced by impact event (as a result of transient cavity collapse) and operated under cover of hot, slowly cooled impact melt in the areas of thinned crust and/or thermally active regions.

Nikolaeva, Olga V.↗
NASA NTRS1974

A method for estimating the absolute ages of small Copernican craters and its application to the determination of Copernican meteorite flux

Cosmic ray exposure ages of ejecta from Copernican craters in various stages of erosion can be used to construct a curve from which the time of formation of craters in the Copernican System can be estimated on the basis of their morphology. Use of this curve to estimate the flux for particles that formed 75-1000 m craters during six increments of Copernican time in an area of Mare Serenitatis suggests that the flux has steadily increased throughout Copernican time. These results are considered to be preliminary until more work of this kind has been done for other mare areas of the moon.

Swann, G. A.↗
NASA NTRS1985

The geomorphology of Rhea - Implications for geologic history and surface processes

Morphological analyses of landforms on Rhea are used to define three physiographic provinces: cratered terrain 1 undifferentiated; cratered terrain 1 lineated; and cratered terrain 2. The important statigraphic relationships between the different provinces are examined with respect to major impact basins and tectonic features. It is shown that the formation of multiringed basins may have caused, or at least controlled the locations of major resurfacing and mantling events. The diameters of the central peaks relative to the impact crater diameters are found to be significantly larger than those within the craters of the moon or Mercury. Both cratered and noncrater lineaments have regional orientations which do not fit current global or regional stress models. On the basis of the morphological analysis, a chronological order is established for the origin of the three provinces: the cratered terrain 1 province was formed first; and cratered terrain 1 lineated and cratered terrain 2 were formed second, and last, respectively. It is shown that the chronological order is generally consistent with current theoretical models of the evolution of Rhea.

Moore, J. M.↗
NASA NTRS2012

Lunar Floor-Fractured Craters: Classification, Distribution and Implications for Magmatism and Shallow Crustal Structure

Floor-fractured craters (FFCs) are a class of lunar craters defined by their distinctly shallow, often plate-like floors, and combinations of radial, con-centric, and polygonal floor-fractures; a variety of other interior features are often observed, such as moats, ridges, small dark-haloed pits, and patches of mare material. They were first classified by Schultz [1] , who recognized eight overall types of floor-fractured crater. These eight subtypes have widely differing appearances, a factor that could provide insight into formation mechanisms (different manifestations of the same mechanism, or indicators of varying formation mechanisms). Two formation mechanisms for FFCs were initially proposed: 1) magmatic intrusion [1], in which magma rising toward the surface in dikes encountered low-density breccia lenses beneath crater floors and spread laterally to form sills, raising and fracturing the crater floor. 2) viscous relaxation [2], in which the properties of the crust permitted viscous flow in the vicinity of the crater, causing long-wavelength relaxation of the topography and uplift and fracturing of the crater floor. Critical to distinguishing between these two end-member hypotheses and identifying others is a quantitative assessment of the topography of FFCs and knowledge of their regional and local settings. The purpose of this study is to use newly available Lunar Reconnaissance Orbiter (LRO) Lunar Orbiter Laser Altimeter (LOLA) altimeter and Lunar Reconnaissance Orbiter Camera (LROC) image data to provide an updated global catalog of the locations, classes, morphometric and morphologic characteristics of all lunar floor-fractured craters. We use the excellent 8-class system initially described in Schultz [1] as a starting point for classification and the enhanced LOLA/LROC data sets to examine and categorize all FFCs; we found evidence for a new FFC class, discernably different from the previously existing types. Our approach, and the global categorization of all FFCs, permits the spatial distribution of each FFC-subtype to be plotted and assessed allowing for further investigation into FFC formation mechanisms. Upon completion, the data set will be made available on our web site at http://www.planetary.brown.edu/html_pages/data.htm.

Jozwiak, L. M.↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Impacts: Modeling and Observations

This document covers the following topics: Cratering on Titan: Projectiles, Craters and Impact Melt; The Cratering Database: Making Code Jockeys Honest; Popigai Impact Structure Modeling: Morphology and Worldwide Ejecta; Anhydrite EOS and Phase Diagram in Relation to Shock Decomposition; Computational Investigations of the Chesapeake Bay Impact Structure; Hydrocode Simulations of the Chesapeake Bay Impact; Lockne Crater as a Result of Oblique Impact; The Influence of a Deep Shelf Sea on the Excavation and Modification of a Marine-Target Crater, the Lockne Crater, Central Sweden; Pre-Drilling Investigation of the Lake Bosumtwi Impact Crater: Constraints from Geophysics and Numerical Modelling; Central Uplift Formation at the Middlesboro Impact Structure, Kentucky, USA; A SRTM Investigation of Serra da Cangalho Impact Structure, Brazil; Brazilian Impact Craters: A Review; Flynn Creek Impact Structure: New Insights from Breccias, Melt Features, Shatter Cones, and Remote Sensing; The Howell Structure, Lincoln County, Tennessee: A Review of Past and Current Research; After the Chicxulub Impact: Control on Depositional and Diagenetic History of the Cenozoic Carbonate Formations of the Northwestern Yucatan Peninsula, Mexico; Ni Contents by Non-Destructive In-Situ XRF Method of Takamatsu-Kagawa Crater District in Japan; and Akiyoshi Limestone Blocks Transported by the P/T Boundary Event to Japan Islands.

Source record↗
NASA NTRS1987

Cratering and obliteration history of the south polar region of Mars

Results are presented from a comprehensive analysis of crater size frequency distributions compiled from Viking Orbiter images of Martian south polar terrains. Depositional histories for the various terrain units are modelled based on deviations of cumulative crater size frequency plots from an assumed production function. Stratigraphic and morphologic data obtained from visual examination of Viking images are also used, primarily to corroborate inferences concerning ages and obliteration histories derived from the crater data.

Plaut, J. J.↗
NASA NTRS1981

Circular feature among dunes of the Great Sand Sea, Egypt

A circular crater, about 4 kilometers in diameter and located at 24.2 deg N, 26.4 deg E, was discovered in Landsat images among the linear dunes of the Great Sand Sea, Egypt. The crater has a sharp and crenulated rim crest, a terraced wall, a discontinuous inner structure (approximately 1.6 kilometers in diameter), and a few rim blocks. Its morphological and morphometric characteristics are similar to those of meteorite impact craters and other circular structures on the moon and the terrestrial planets. Because of its interaction with windblown sand, it is particularly comparable with craters on Mars.

El-Baz, F.↗
NASA NTRS1993

Modelling hypervelocity impacts into aluminum structures based on LDEF data

Realizing and understanding the effects of the near-Earth space environment on a spacecraft during its mission lifetime is becoming more important with the regeneration of America's space program. Included among these potential effects are the following: erosion and surface degradation due to atomic oxygen impingement; ultraviolet exposure embrittlement; and delamination, pitting, cratering, and ring formation due to micrometeoroid and debris impacts. These effects may occur synergistically and may alter the spacecraft materials enough to modify the resultant crater, star crack, and/or perforation. This study concentrates on modelling the effects of micrometeoroid and debris hypervelocity impacts into aluminum materials (6061-T6). Space debris exists in all sizes, and has the possibility of growing into a potentially catastrophic problem, particularly since self-collisions between particles can rapidly escalate the number of small impactors. We have examined the morphologies of the Long Duration Exposure Facility (LDEF) impact craters and the relationship between the observed impact damage on LDEF versus the existing models for both the natural (micrometeoroid) and manmade (debris) environments in order to better define these environments.

Coombs, C. R.↗
NASA NTRS1979

Emplacement of Fahrenheit crater ejecta at the Luna-24 site

The likelihood that the gabbroic and monomineralic fragments in the Luna-24 soils were excavated during the Fahrenheit cratering event can be assessed by considering the quantity, characteristics, and mode of deposition of Fahrenheit ejecta in the vicinity of the Luna-24 site. The original morphology of Fahrenheit's ejecta deposits is inferred by examining a fresh crater, Lichtenberg B, of a comparable site that formed in a similar type of target material. On the basis of this analogy, a probability of over 80% was calculated that the Luna-24 site was morphologically disturbed by the deposition of Fahrenheit ejecta. The relative abundance, gabbroic composition, and unshocked character of the holocrystalline fragments discovered in the Luna-24 core sample are consistent with the widespread occurrence of Fahrenheit deposits and the characteristics of Fahrenheit ejecta anticipated at the Luna-24 range.

Settle, M.↗
NASA NTRS1984

Curvilinear Ground on Mars: the Search for Terrestrial Analogs

Curvilinear features on Mars have dimensions ranging from 0.5 to 18.6 km in length and 0.2 to 2.0 km in width; these landforms can occur as curving ridges and troughs, rimless arcuate depressions, or features with no apparent relief. The Martian curvilinear ground has a relatively consistent relationship to both regional and local geomorphology. These landforms are one of a suite of features that occur near the base of the regional slope that marks the transition from the cratered uplands to the northern plains. Based on morphologic similarities, numerous terrestrial analogs were proposed for these Martian features. These include gilgai, backwasting scarps, solifluction lobes, ice-cored ridges and glacial moraines. Process models for the origin of the curvilinear ground suggest that its formation probably involved several processes, including scarp retreat by backwasting.

Rossbacher, L. A.↗