Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Temperature Control of Crystal Optics for Ultrahigh-Resolution Applications

The temperature control of crystal optics is critical for ultrahigh resolution applications such as those used in meV-resolved Inelastic Scattering. Due to the low count rate and long acquisition time of these experiments, for 1-meV energy resolution, the absolute temperature stability of the crystal optics must be maintained below 4 mK to ensure the required stability of lattice constant, thereby ensuring the energy stability of the optics. Furthermore, the temperature control with sub-mK precision enables setting the absolute temperature of individual crystal, making it possible to align the reflection energy of each crystal’s rocking curve in sub-meV resolution thereby maximizing the combined efficiency of the crystal optics. In this contribution, we report the details of an EPICS control system using PT1000 sensors, Keithley 3706A 7.5 digits sensor scanner, and Wiener MPOD LV power supply for the analyzer crystals of the Inelastic X-ray Scattering (IXS) beamline 10-ID at NSLS-II**. We were able to achieve absolute temperature stability below 1 mK and sub-meV energy alignment for several asymmetrically cut analyzer crystals. The EPICS ePID record was used for the control of the power supplies based on the PT1000 sensor input that was read with 7.5 digits accuracy from the Keithley 3706A scanner. The system enhances the performance of the meV-resolved IXS spectrometer with currently a 1.4 meV total energy resolution and unprecedented spectral sharpness for studies of atomic dynamics in a broad range of materials.

Gofron, Kaz↗
DOE OSTI2024

Investigating Influential Parameters for High-Purity Germanium Crystal Growth

This paper focuses on the research and development of high-purity germanium (HPGe) crystals for detector fabrication, specifically targeting applications in rare-event physics searches. The primary objective was to produce large-scale germanium crystals weighing >1 kg with a controlled diameter of ∼10 cm and an impurity range of approximately 1010/cm 3. Ensuring structural integrity and excellent crystalline quality requires a thorough assessment of dislocation density, a critical aspect of the crystal development process. Dislocation density measurements play a crucial role in maximizing the sensitivity of HPGe detectors, and our findings confirmed that the dislocation density fell within acceptable ranges for detector fabrication. Additionally, this paper examines the segregation coefficient of various contaminants during the crystal development process. Comprehensive analysis of impurity segregation is essential for reducing contaminant quantities in the crystal lattice and customizing purification processes. This, in turn, minimizes undesired background noise, enhancing signal-to-noise ratios for rare-event physics searches and overall detector performance. The investigation included the segregation coefficients of three major acceptors and one donor in crystals grown at the University of South Dakota, providing valuable insights for optimizing crystal purity and detector efficiency.

Bhattarai, Sanjay↗
DOE OSTI2024

Partition between supercooled liquid droplets and ice crystals in mixed-phase clouds based on airborne in situ observations

Abstract. The onset of ice nucleation in mixed-phase clouds determines the lifetime and microphysical properties of ice clouds. In this work, we develop a novel method that differentiates between various phases of mixed-phase clouds, such as clouds dominated by pure liquid or pure ice segments, compared with those having ice crystals surrounded by supercooled liquid water droplets or vice versa. Using this method, we examine the relationship between the macrophysical and microphysical properties of Southern Ocean mixed-phase clouds at −40 to 0 °C (e.g. stratiform and cumuliform clouds) based on the in situ aircraft-based observations during the US National Science Foundation Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) flight campaign. The results show that the exchange between supercooled liquid water and ice crystals from a macrophysical perspective, represented by the increasing spatial ratio of regions containing ice crystals relative to the total in-cloud region (defined as ice spatial ratio), is positively correlated with the phase exchange from a microphysical perspective, represented by the increasing ice water content (IWC), decreasing liquid water content (LWC), increasing ice mass fraction, and increasing ice particle number fraction (IPNF). The mass exchange between liquid and ice becomes more significant during phase 3 when pure ice cloud regions (ICRs) start to appear. Occurrence frequencies of cloud thermodynamic phases show a significant phase change from liquid to ice at a similar temperature (i.e. −17.5 °C) among three types of definitions of mixed-phase clouds based on ice spatial ratio, ice mass fraction, or IPNF. Aerosol indirect effects are quantified for different phases using number concentrations of aerosols greater than 100 or 500 nm (N>100 and N>500, respectively). N>500 shows stronger positive correlations with ice spatial ratios compared with N>100. This result indicates that larger aerosols potentially contain ice-nucleating particles (INPs), which facilitate the formation of ice crystals in mixed-phase clouds. The impact of N>500 is also more significant in phase 2 when ice crystals just start to appear in the mixed phase compared with phase 3 when pure ICRs have formed, possibly due to the competing aerosol indirect effects on primary and secondary ice production in phase 3. The thermodynamic and dynamic conditions are quantified for each phase. The results show stronger in-cloud turbulence and higher updraughts in phases 2 and 3 when liquid and ice coexist compared with pure liquid or ice (phases 1 and 4, respectively). The highest updraughts and turbulence are seen in phase 3 when supercooled liquid droplets are surrounded by ice crystals. These results indicate both updraughts and turbulence support the maintenance of supercooled liquid water amongst ice crystals. Overall, these results illustrate the varying effects of aerosols, thermodynamics, and dynamics through various stages of mixed-phase cloud evolution based on this new method that categorizes cloud phases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Prognostic simulations of mixed-phase clouds with model AC-1D v1.0: the impact of aerosol types and freezing parameterizations on ice crystal budgets

Mixed-phase clouds at high latitudes contribute to the uncertainty in predicting cloud feedbacks and climate sensitivity, mainly due to the complexity of microphysical processes that influence the partitioning between the supercooled liquid and ice phases, and hence, cloud radiative effects on regional scales. Particularly in Arctic mixed-phase clouds, the activation of ice-nucleating particles (INPs) from various aerosol populations remains a leading source of uncertainty. We developed an aerosol-cloud one-dimensional (AC-1D) model, which provides a novel framework to prognostically treat INP and ice crystal budgets while explicitly accounting for polydisperse and multicomponent aerosol that activate INPs following different freezing parameterizations. The AC-1D model is informed by large-eddy simulations to probe the impact of INP representation on predicted ice crystal number concentrations (N i ) and ice crystal budgets in mixed-phase Arctic stratus. We apply three immersion freezing (IMF) parameterizations, two time-independent (singular) and one time-dependent (classical nucleation theory), to predict the evolution of the INP reservoir and resulting ice crystal budget from polydisperse mineral dust, organic (humic-like substances), and sea spray aerosol particle size distributions. Our analysis focuses on how variations in aerosol number concentration and cloud system parameters such as cloud cooling rate, cloud-top entrainment rate, and ice crystal fall speed influence the INP reservoir and ice crystal budgets. Furthermore, this study investigates the competitive ice nucleation dynamics in mixed aerosol environments and provides a process-level quantification of the INP budget terms, which directly controls ice crystal budgets. For all studied case scenarios, the aerosol types and associated particle size distributions significantly impact INP and N i , and the choice between a time-dependent and a singular freezing description yields orders-of-magnitude differences in the predicted INP and N i over the 10 h simulation time, reflecting typical cloud lifetimes. Our results show that the influence of cloud cooling, INP entrainment, and sedimentation varies significantly depending on the chosen freezing parameterization. These findings underscore the critical need for robust IMF parameterizations and precise cloud system observations to enhance the accuracy of models in predicting mixed-phase cloud structure and evolution.

Arctic clouds↗
DOE OSTI2019

Microhardness Study of CdZnTeSe Crystals for X-ray and Gamma ray Detectors

A quaternary material Cd 1-x ZnxTe 1-y Sey (CZTS) is currently under investigation for its application as a material for hard X-ray and gamma ray detectors. The addition of selenium was found to be very effective in suppressing the formation of sub-grain boundaries and their networks. The CZTS crystals were grown by the THM technique at Brookhaven National Laboratory. The ingots are ~52 mm in diameter, weighting about 1.0-1.2 kg. In general, the ingots were crack-free except near the Te-CZTS interface. The goal of the presented work is to increase our understanding of key factors influencing the crystal quality and its suitability for radiation detection by a study of its mechanical properties, namely the microhardness and its dependence on crystal composition. Microhardness is closely connected to dislocations and their mobility. We report here on a detailed microhardness characterization and its correlation to the crystal composition of quaternary material Cd 1-x ZnxTe 1-y Se y . Measurements of the Vickers microhardness, resistivity mapping, photoluminescence, and Zn and Se composition analysis were employed along the crystal growth axis. The microhardness values, bandgap and Zn and Se composition along the crystal axis have been correlated. We also performed comparative study of a set of CdTe and CdZnTe samples prepared in the crystal growth laboratory of the Institute of Physics of Charles University or originating from commercial sources.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Self-healing macromolecular crystal materials

Hybrid materials are disclosed including molecular/protein crystals integrated with synthetic polymers. The disclosed materials combine the structural order and periodicity of crystals, the adaptiveness and tunable mechanical properties of polymeric networks, and the chemical versatility of protein building blocks. Some of the properties of the disclosed materials include the following: 1) allows crystals—which are typically rigid and brittle—to expand and contract reversibly; 2) incorporates polymers to increase the mechanical toughness of the crystals and allow self-healing; 3) reversibly expand/contract crystal lattices and mobilize the protein components therein may provide a new means to improve X-ray diffraction quality and explore otherwise inaccessible protein structural states using 3D protein crystallography; 4) creation of chemically and mechanically differentiated domains within single crystals. Some example embodiments combine the properties of hydrogels (flexibility, adaptability, elasticity, self-healing), crystals (structural order) and proteins (chemical and genetic tailorability).

Tezcan, Faik↗
DOE OSTI2022

A Generalizable Approach to Direct the Self-Assembly of Functional Blue-Phase Liquid Crystals

Blue phases (BPs) are soft and stimuli-responsive photonic crystals that are interesting for sensing, display, and lasing applications. Polycrystallinity has, however, limited both the study and applicability of BPs. Continuum simulations, which lack molecule-specific details, predict that striped chemical patterns, consisting of alternating homeotropic and planar regions, can be used to nucleate single crystals of BPs. Here it is experimentally demonstrated that, independent of the chemistry and complexity of the BP forming material, chemical patterns direct the self-assembly of BPs; these results indicate that a general, thermodynamics-based continuum description of BP self-assembly is adequate for a broad range of materials. When the pattern periodicity equals the BPII unit cell size, single crystals with (100) orientation form for all studied materials. Chemical patterns also promote the growth of BPI crystals with (110) orientation. Importantly, the self-assembly of a photopolymerizable BP is directed and thermally stable, UV-polymerized single crystals are prepared. As a result, the ability to create arbitrarily large, polymeric photonic single crystals with uniform lattice orientation, may have broad implications for optical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Crystallization Characteristics and In-Mold Performance of Electroslag Remelting-Type TiO{sub 2}-Bearing Slag

The non-isothermal crystallization characteristics of the electroslag remelting (ESR)-type TiO{sub 2}-bearing slag were studied. The effect of crystallization characteristics of the slag on the in-mold performance was verified by ESR pilot trials operating in a static mode. The results showed that increasing TiO{sub 2} content decreased the crystallization temperature and liquidus temperature of the slag and suppressed the crystallization tendency of the slag. There is no change in the types of the crystalline phases in the slag with different TiO{sub 2} contents during cooling, i.e., 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2}, CaTiO{sub 3}, and CaF{sub 2}. The sequence of crystal precipitation during cooling was 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} to CaTiO{sub 3}, and then CaF{sub 2} with increasing TiO{sub 2} content from 4.2 to 12.6 mass pct. With adding 16.8 mass pct TiO{sub 2} in the slag, the precipitation of 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} and CaTiO{sub 3} took place simultaneously, followed by CaF{sub 2}. With the increase in the TiO{sub 2} content from 4.2 to 16.8 mass pct in the slag, the dominant crystalline phase changed from 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} to CaTiO{sub 3}. The morphology of 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} and CaTiO{sub 3} changed from faceted and bonelike to elliptically faceted and blocky, respectively. The morphology of CaF{sub 2} were spherical in all cases, irrespective of TiO{sub 2} contents in the slag. The decrease in the crystallization tendency of the slag with increasing TiO{sub 2} contents was attributed to the decrease in the activity of CaO in the slag. The increasing of TiO{sub 2} content in the slag are favorable for providing thin slag skin and stable heat flux across the slag skin, which improved the surface quality of the as-cast ESR ingot as demonstrated by ESR pilot trials operating in a static mode.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomistic understanding of interdependence of crystal growth of two seeds embedded in glass

Recent results showed that during growth, a crystal seed embedded in glass experiences nonuniform forces from the host matrix. This result raised the possibility that during devitrification of glass, the growth of a crystal can be affected by the presence of neighboring crystals. To investigate the nature of any such interdependence of growth of neighboring crystals, atomic scale morphology of two seeds growing in a glass matrix was simulated as a function of their separation and relative misorientation. The results show a coupled rotation of seeds driven by (1) non-uniform forces from the surrounding glass, and (2) mutual interactions between the seeds. At small separations and low misorientation, each seed rotates toward perfect alignment, ultimately forming a single crystal. The onset and rate of alignment, as well as subsequent crystal growth, are strongly dependent on the growth temperature. In contrast, at larger separations and higher misorientation, the seeds cannot achieve full alignment before coalescing, resulting in polycrystalline structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of melt shearing on D -mannitol crystal twisting in the presence of small molecule and macromolecular additives

Here, many molecular crystals grow as twisted lamellae from the melt when the driving force is high, but the mechanisms governing the spontaneous formation of helicoidal crystallites are varied and those operative in particular cases are difficult to identify. Polyvinylpyrrolidone (PVP) induces the crystallization of D-mannitol as banded spherulites comprised of twisted fibrils emanating radially from spherulite nucleation centers. The molecular weight of the PVP phase affects the twisting pitch, P, (rotation of the crystallite by 180°), in D-mannitol thin films crystallized from the melt. At a relatively high crystallization temperature (T c =130°C), P was sensitive to the PVP molecular weight, ranging from 390±20 μm for D-mannitol films incorporating 15 wt% 10 kDa PVP to 20±3 μm for the same weight of 1300 kDa PVP. Magnitudes of complex viscosities, |η*|, of D-mannitol/PVP melts measured via small-amplitude oscillatory shearing were strongly dependent on the PVP molecular weight, but were not correlated to P(T). Instead, P was sensitive to the dynamic PVP chain conformation during D-mannitol crystallization. Under steady torsional shear, P decreased from~30 μm to~8μm with increasing shear rates from 0.01 to 100 s -1 for D-mannitol films crystallized at 130°C in the presence of 15 wt% 10 or 1300 kDa PVP. Shear forces decrease the entanglement density of polymer chains while orienting the chains along the stream lines of the viscometric flow, indicating that the conformations of macromolecular additives can affect the pitch of banded spherulites. By contrast, P in D-mannitol twisted by D-sorbitol was independent of shear rate.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Automated Identification of Molecular Crystals’ Packing Motifs

Packing motifs—patterns in how molecules orient relative to one another in a crystal structure—are an important concept in many subdisciplines of materials science because of correlations observed between specific packing motifs and properties of interest. That said, packing motif data sets have remained small and noisy due to intensive manual labeling processes and insufficient labeling schemes. The most prominent labeling algorithms calculate relative interplanar angles of nearest neighbor molecules to determine the packing motif of a molecular crystal, but this simple approach can fail when neighbors are naively sampled isotropically around the crystal structure. To remedy this issue, here we propose an optimization algorithm, which rotates the molecular crystal structure to find representative molecules that inform the packing motif. We package this algorithm into an automated framework—Autopack—which both optimally rotates the crystal structure and labels the packing motif based on the appropriate neighboring molecules. In this work, we detail the Autopack framework and its performance, which shows improvements compared to previous state-of-the-art labeling methods, providing the first quantitative point of comparison for packing motif labeling algorithms. Furthermore, using Autopack (available at https://ipo.llnl.gov/technologies/software/autopack), we perform the first large-scale study of potential relationships between chemicals’ compositions and packing motifs, which shows that these relationships are more complex than previously hypothesized from studies that used only tens of polycyclic aromatic hydrocarbon molecules. Autopack’s capabilities help pose next steps for crystal engineering research focusing not only on a molecule’s adoption of a specific packing motif but also on new structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Volumetric Shaping of Nanoparticle-DNA Crystals by Light-Induced Milling

DNA-programmable self-assembly enables the formation of nanoparticle crystals with controlled lattice symmetry. While this approach offers the formation of complexly ordered nanostructures for optical, mechanical, and biological applications, a mesoscale control over such nanomaterials is limited. Directing the material formation process through the assembly pathway or external fields allows for modulating crystal morphology, but achieving arbitrary morphology remains challenging. Here, we present a photothermal method for shaping 3D DNA-programmable crystals of gold nanoparticles. Through local heating of nanoparticles due to plasmonic light absorption, we induce targeted volumetric dissolution of specifically defined crystal areas with micron-scale accuracy. This technique effectively prescribes crystal shaping and creates arbitrarily shaped voids within crystals. We further investigate both computationally and experimentally the key factors governing volumetric material subtraction. The developed automated light-milling platform enables the fabrication of nanomaterials exhibiting both DNA-programmable nanoscale order and custom-designed mesoscale architecture.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High Temperature, Isothermal Growth Promotes Close Packing and Thermal Stability in DNA-Engineered Colloidal Crystals

Here, we report a strategy to accelerate the synthesis and increase the crystallinity of colloidal crystals engineered with DNA. Specifically, by holding the DNA-modified Au particle building blocks above the T m of the individual nanoparticle building blocks, but slightly below the T m of the anticipated colloidal crystal during the assembly process, crystallinity is increased, and enthalpically-favored phases with high degrees of facet registration are observed. We studied the utility of this approach with systems for which the commonly adopted slow-cooling approach yielded primarily amorphous aggregates. In particular, we used it to synthesize high-volume fraction colloidal crystals from large (80 nm) anisotropic nanoparticles (cubes and rhombic dodecahedra) with short (<14 nm) DNA designed to restrict the degrees of freedom for the DNA bonds and maintain the anisotropy of the particle building block. Small-angle X-ray scattering and electron microscopy studies show that the crystalline phases synthesized via this method are more thermally stable than their corresponding aggregate phases, likely due to an increased number of DNA-DNA bonds between particles. Crystal size tunability (between 0.5 and 15 µm edge lengths) and epitaxial growth were demonstrated using this strategy by modulating the NaCl concentration in tandem with previously synthesized colloidal crystal nuclei. Taken together, this isothermal strategy provides a route to deliberately crystallize a wide variety of anisotropic colloidal materials and expands the phase space accessible to nanoparticles modified with DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Revealing and Engineering Assembly Pathways of 3D DNA Origami Crystals

Recent developments in nanomaterial self-assembly demonstrate the capability to create tailored nanostructures by engineering both the binding coordination and specificity of interactions between material subunits. DNA origami frames allow for the design and fabrication of a broad variety of ordered 3D nanoscale architectures through self-assembly, facilitated by frame-to-frame bonds with designable strength and specificity. While the bond design is critical to lattice formation, the assembly process itself is often dependent on a thermal pathway. Highly ordered nanoscale frameworks, assembled from DNA frames, are predominantly crystallized through thermal annealing pathways that typically follow a “slow” cooling approach, with experiments on the time scale of days yielding DNA origami crystals in the range of 1−10 μm. This extended assembly time scale hinders the study of crystal formation pathways, necessitating a deeper understanding of factors governing successful annealing. Lack of insight into time scale also presents a practical limitation for material fabrication. Here, we investigate key factors affecting lattice assembly pathways and demonstrate that precise engineering of assembly conditions greatly reduces assembly times by up to nearly 2 orders of magnitude. We evaluate the nucleation and growth of crystals via optical and electron microscopy, and small-angle X-ray scattering techniques, mapping the time−temperature-transformation of superlattices from the melt through single-crystal optical tracking. The results show that origami frame assembly can be described by classical nucleation and growth theory, which can, in turn, be used to prescribe the growth of the crystals. Lastly, these findings are applied to demonstrate thermal pathway-dependent assembly, forming distinct assemblies based on different thermal annealing profiles.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multistage nucleation pathway in LiF molten salt mirrors the crystal–melt interface structure

Despite over a century of studies, fundamental questions remain about the processes governing crystal nucleation from melts or solutions. Research over the past three decades has presented mounting evidence for kinetic pathways of crystal nucleation that are more complex than envisioned by the simplest forms of classical theory. Such observations have been presented for colloidal and elemental systems with covalent and metallic bonding. Despite the technological and geochemical importance of molten salts, similar studies for these ionically bonded systems are currently lacking. Here we develop a machine learning interatomic potential for a model ionic system: LiF. The potential features quantum-level accuracy for both liquid and multiple solid polymorphs over wide temperature and pressure ranges and accurately reproduces experimentally measured properties. Thanks to the efficiency of the potential, which enables microsecond-scale molecular dynamics simulations, induction times for nucleation of LiF solids from their melts are computed over a range of undercoolings. With the aid of a set of robust local order parameters established here, the simulations reveal that homogeneous crystal nucleation in undercooled melts preferentially initiates from liquid regions showing slow dynamics and high bond orientational order simultaneously, and the second-shell order of both precritical nuclei and the surface of postcritical nuclei is dominated by hexagonal close packing and body-centered cubic local structure, even though the nucleus core is dominated by face-centered cubic structure corresponding to the stable rocksalt crystal structure. Finally, we establish a connection between the crystallization pathway and the equilibrium crystal-melt interface structure.

Applied Physical Sciences↗
DOE OSTI2019

Effect of Conductivity Type and Doping Level of Silicon Crystals on the Size of Formed Pore Channels during Anodic Etching in Hydrofluoric Acid Solutions

In this paper, we discuss causes of the multidirectional effect of changes in the concentrations of free charge carriers in silicon crystals of p- and n-type conductivity on the transverse dimensions of pores formed as a result of anodic etching in hydrofluoric acid solutions, as well as the effect of anodic current density on pore size. The observed dependences are explained based on the concepts of electrochemical pore formation in semiconductor crystals as self-organizing cooperative processes accompanied by the injection of electrons from the chemical reaction region at the pore advancement front. Differences in the size of pores forming at the same current density in crystals differing in type and concentration of free charge carriers are associated with the effective temperature of the front of the cooperative chemical reaction at the bottom of germinating pores. This temperature, in turn, correlates with the power density of thermal energy released in the near-surface region of the etching crystal, either due to recombination processes for a p-type semiconductor or direct or indirect energy transfer from hot electrons to lattice vibrations in the case of a n-type semiconductor. The characteristic relaxation times of injected nonequilibrium electrons were calculated depending on the concentrations of the majority charge carriers in silicon crystals of both types of conductivity and the corresponding thicknesses of the regions of relaxation energy release. The revealed patterns of concentration changes in the power density of heat release in the near-frontal region of etching silicon crystals of p- and n-type conductivity are in good agreement with observed changes in the size of germinating pores.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Dislocation‐Driven Formation of Oriented Macroperiodic Metastructures of Curved Single Crystal Lattices in Glass

Abstract Single crystals fabricated in glass by localized heating can develop uniquely deformed lattices stabilized by the surrounding amorphous medium. The development of lattice curvature appears to be intrinsic to the crystal growth process in some systems, while the result of the locally changing crystallography in others. In this work, a model laser‐fabricated rotating lattice Sb 2 S 3 crystal grown in stoichiometric glass is used to demonstrate fabrication of novel macroperiodic metastructures that utilize intrinsic lattice curvature superimposed with subtle crystallographic influences. The limited availability of slip systems drives the lattice curvature magnitude to vary with crystal growth direction, maximizing for lattices aligned with the predominant Burgers vector along with corresponding increases in dislocation density. Misaligned lattice orientations form smaller secondary lattice curvatures arising from misaligned Burgers vectors with further elastic contributions. Over extended crystal growth, these secondary components align the lattice to rotate about either the <001> or <010> crystal axes forming repeating metastructures of lattice orientation with periodicity 20–160 microns in length. The mechanistic approach used in this work may be expanded to other systems with known slip systems to better understand and design macroperiodic metastructures.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Building Blocks for High-Efficiency Organic Photovoltaics: Interplay of Molecular, Crystal, and Electronic Properties in Post-Fullerene ITIC Ensembles

Accurate single-crystal X-ray diffraction data offer a unique opportunity to compare and contrast the atomistic details of bulk heterojunction photovoltaic small-molecule acceptor structure and packing, as well as provide an essential starting point for computational electronic structure and charge transport analysis. Herein, we report diffraction-derived crystal structures and computational analyses on the n-type semiconductors which enable some of the highest efficiency organic solar cells produced to date, 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC) and seven derivatives (including three new crystal structures: 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-propylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC-C3), 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(3-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (m-ITIC-C6), and 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6,7-difluoro)-indanone))-5,5,11,11-tetrakis(4-butylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC-C4-4F). IDTT acceptors typically pack in a face-to-face fashion with π–π distances ranging from 3.28–3.95 Å. Additionally, edge-to-face packing is observed with S...π interactions as short as 3.21–3.24 Å. Moreover, ITIC end group identities and side chain substituents influence the nature and strength of noncovalent interactions (e.g. H-bonding, π–π) and thus correlate with the observed packing motif, electronic structure, and charge transport properties of the crystals. Furthermore, density functional theory (DFT) calculations reveal relatively large nearest-neighbor intermolecular π-π electronic couplings (5.85–56.8 meV) and correlate the nature of the band structure with the dispersion interactions in the single crystals and core–end group polarization effects. Overall, this combined experimental and theoretical work reveals key insights into crystal engineering strategies for indacenodithienothiophene (IDTT) acceptors, as well as general design rules for high-efficiency post-fullerene small molecule acceptors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗