Search NASA⌕ Search

SEARCH · Search NASA

Results for “data digitization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. A large grassland was located on the Kenai Peninsula which may be a potential grazing land. Two 1:250 K vegetation maps were constructed from ERTS-1 scenes 1049-20505 and 1066-20453 using 70 mm MSS chips and black and white prints for an area of 3.5 million acres. Another area (464,000 acres) was mapped using digital data. The latter map is the most accurate and detailed vegetation map of that area produced to date. Areal extents of identified vegetation types were derived for the area mapped from digital data. Early spring (prior to leafing out of deciduous trees) is suspected as being the best time for mapping Alaskan vegetation from MSS data due to the best time for mapping Alaskan vegetation from MSS data due to the radiometrically distinctness of the vegetation communities at that time. Vegetative overlays produced at 1:250 K compare favorably with vegetative maps compiled by Lloyd A. Spetzman and assembled by the joint Federal-State Land Use Planning Commission for Alaska.

Branton, C. I.↗
NASA NTRS1976

Engineering analysis of LANDSAT 1 data for Southeast Asian agriculture

The author has identified the following significant results. LANDSAT spatial resolution was estimated to be adequate, but barely so, for the purpose of detailed assessment of rice or site status. This was due to the spatially fine grain, heterogenous nature of most rice areas. Use of two spectral bands of digital data (MSS 5 and MSS 6 or 7) appeared to be adequate for site recognition and gross site status assessment. Spectral/temporal signatures were found to be more powerful than spectra signatures alone and virtually essential for most analyses of rice growth and rice sites in the Philippine environment. Two band, two date signatures were estimated to be adequate for most purposes, although good results were achieved using one band two- or four-date signatures. A radiometric resolution of 64 levels in each band was found adequate for the analyses of LANDSAT digital data for site recognition and gross site or rice growth assessment.

Mcnair, A. J.↗
NASA NTRS1992

Covariance of biophysical data with digital topograpic and land use maps over the FIFE site

This paper discusses the biophysical stratification of the FIFE site, implementation of the stratification utilizing geographic information system methods, and validation of the stratification with respect to field measurements of biomass, Bowen ratio, soil moisture, and the greenness vegetation index (GVI) derived from TM satellite data. Maps of burning and topographic position were significantly associated with variation in GVI, biomass, and Bowen ratio. The stratified design did not significantly alter the estimated site-wide means for surface climate parameters but accounted for between 25 and 45 percent of the sample variance depending on the variable.

Davis, F. W.↗
NASA NTRS1982

A Landsat-based inventory procedure for agriculture in California

Agriculture, which occupies a vital position in the economy of the State of California, depends crucially on the available water. The California Department of Water Resources (DWR) is, therefore, greatly concerned with the total water requirements for agricultural applications. In view of the limitations of an area-limited, single-date survey system, the DWR has been cooperating with NASA and the University of California in a study of the applicability of Landsat imagery and digital data as an aid in making decisions concerning the management of water resources. Attention is given to a statewide inventory of irrigated land, computer-assisted estimation and mapping of irrigated land, and a crop type analysis using Landsat digital data.

Wall, S. L.↗
NASA NTRS1991

A proposal to extend our understanding of the global economy

Satellites acquire information on a global and repetitive basis. They are thus ideal tools for use when global scale and analysis over time is required. Data from satellites comes in digital form which means that it is ideally suited for incorporation in digital data bases and that it can be evaluated using automated techniques. The development of a global multi-source data set which integrates digital information is proposed regarding some 15,000 major industrial sites worldwide with remotely sensed images of the sites. The resulting data set would provide the basis for a wide variety of studies of the global economy. The preliminary results give promise of a new class of global policy model which is far more detailed and helpful to local policy makers than its predecessors. The central thesis of this proposal is that major industrial sites can be identified and their utilization can be tracked with the aid of satellite images.

Hough, Robbin R.↗
NASA NTRS1974

Space Shuttle communications - Wideband direct link signal and system design

This paper describes the design of a wideband S-band communications link from the Space Shuttle Orbiter to a ground-based terminal. This link will be used for transmission of television, digital data (various rates), or analog data, and is of interest because of the presence of bandwidth, power, and hardware constraints. The procedure followed to arrive at an overall signal and system design is outlined, and system performance margins are presented for various operational configurations. Finally, the growth potential of this link for digital data transmission is discussed.

Batson, B. H.↗
NASA NTRS1995

Method for coding low entrophy data

A method of lossless data compression for efficient coding of an electronic signal of information sources of very low information rate is disclosed. In this method, S represents a non-negative source symbol set, (s(sub 0), s(sub 1), s(sub 2), ..., s(sub N-1)) of N symbols with s(sub i) = i. The difference between binary digital data is mapped into symbol set S. Consecutive symbols in symbol set S are then paired into a new symbol set Gamma which defines a non-negative symbol set containing the symbols (gamma(sub m)) obtained as the extension of the original symbol set S. These pairs are then mapped into a comma code which is defined as a coding scheme in which every codeword is terminated with the same comma pattern, such as a 1. This allows a direct coding and decoding of the n-bit positive integer digital data differences without the use of codebooks.

Yeh, Pen-Shu↗
NASA NTRS1973

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. Classification of digital data for mapping Alaskan vegetation has been compared to ground truth data and found to have accuracies as high as 90%. These classifications are broad scale types as are currently being used on the Major Ecosystems of Alaska map prepared by the Joint Federal-State Land Use Planning Commission for Alaska. Cost estimates for several options using the ERTS-1 digital data to map the Alaskan land mass at the 1:250,000 scale ranged between $2.17 to $1.49 per square mile.

Mckendrick, J. D.↗
NASA NTRS2007

Infrared Camera Characterization of Bi-Propellant Reaction Control Engines during Auxiliary Propulsion Systems Tests at NASA's White Sands Test Facility in Las Cruces, New Mexico

This paper describes the application of a FUR Systems A40M infrared (IR) digital camera for thermal monitoring of a Liquid Oxygen (LOX) and Ethanol bi-propellant Reaction Control Engine (RCE) during Auxiliary Propulsion System (APS) testing at the National Aeronautics & Space Administration's (NASA) White Sands Test Facility (WSTF) near Las Cruces, New Mexico. Typically, NASA has relied mostly on the use of ThermoCouples (TC) for this type of thermal monitoring due to the variability of constraints required to accurately map rapidly changing temperatures from ambient to glowing hot chamber material. Obtaining accurate real-time temperatures in the JR spectrum is made even more elusive by the changing emissivity of the chamber material as it begins to glow. The parameters evaluated prior to APS testing included: (1) remote operation of the A40M camera using fiber optic Firewire signal sender and receiver units; (2) operation of the camera inside a Pelco explosion proof enclosure with a germanium window; (3) remote analog signal display for real-time monitoring; (4) remote digital data acquisition of the A40M's sensor information using FUR's ThermaCAM Researcher Pro 2.8 software; and (5) overall reliability of the system. An initial characterization report was prepared after the A40M characterization tests at Marshall Space Flight Center (MSFC) to document controlled heat source comparisons to calibrated TCs. Summary IR digital data recorded from WSTF's APS testing is included within this document along with findings, lessons learned, and recommendations for further usage as a monitoring tool for the development of rocket engines.

Holleman, Elizabeth↗
DOE OSTI2025

A Radiation-Hard 8-Channel 15-Bit 40-MSPS ADC for the ATLAS Liquid Argon Calorimeter Readout

The custom design of a radiation-hardened, 8-channel, 40-MSPS, 15-bit resolution, 14.2-bit dynamic range, 11.4-ENOB ADC data acquisition ASIC fabricated in a commercial 65-nm triple-well CMOS technology is presented. The ADC is developed for and integrates seamlessly into the readout system for the ATLAS liquid argon (LAr) calorimeter in the high-luminosity large hadron collider (HLLHC) upgrade at CERN, which will require a total of 364 936 ADC channels. A three-stage MDAC+SAR pipelined ADC architecture was designed to meet the physics requirements and scientific goals of the ATLAS experiment. The ADC is a fully self-contained data acquisition system that includes foreground calibration, digital data processing, digital control, and supporting circuitry. The measured performance shows the ADC achieves a competitive dynamic range and SNDR, and it meets or exceeds the ATLAS analog requirements. Radiation tolerance and scalability design considerations were implemented at the device-, circuit-, and system-level. Radiation-hardening-by-design techniques used include redundancy for digital circuits, the use of MiM capacitors, and a hybrid RC-DAC for the ADC core. The ADC ASIC was demonstrated to be robust against the effects of the intense radiation expected in the HL-LHC experimental environment.

DAQ↗
NASA NTRS1993

Science & Technology Laboratory Applications Software (ELAS)

Digital image analysis system processes Landsat multispectral data, aircraft-acquired scanner data, digitized topographical data, and such ancillary data as soil types and rainfall information. Over 230 modules aid user in performing wide range of land cover analyses and manipulations.

Junkin, B. G.↗
NASA NTRS1979

Preliminary results of SAR soil moisture experiment, November 1975

The experiment was performed using the Environmental Research Institute of Michigan's (ERIM) dual-frequency and dual-polarization side-looking SAR system on board a C-46 aircraft. For each frequency, horizontally polarized pulses were transmitted and both horizontally and vertically polarized return signals were recorded on the signal film simultaneously. The test sites were located in St. Charles, Missouri; Centralia, Missouri; and Lafayette, Indiana. Each test site was a 4.83 km by 8.05 km (3 mile by 5 mile) rectangular strip of terrain. Concurrent with SAR overflight, ground soil samples of 0-to-2.5 cm and 0-to-15 cm layers were collected for soil moisture estimation. The surface features were also noted. Hard-copy image films and the digital data produced via optical processing of the signal films are analyzed in this report to study the relationship of radar backscatter to the moisture content and the surface roughness. Many difficulties associated with processing and analysis of the SAR imagery are noted. In particular, major uncertainty in the quantitative analysis appeared due to the difficulty of quality reproduction of digital data from the signal films.

Choudhury, B. J.↗
NASA NTRS1979

Feasibility of automated dropsize distributions from holographic data using digital image processing techniques

An automated technique for measuring particle diameters and their spatial coordinates from holographic reconstructions is being developed. Preliminary tests on actual cold-flow holograms of impinging jets indicate that a suitable discriminant algorithm consists of a Fourier-Gaussian noise filter and a contour thresholding technique. This process identifies circular as well as noncircular objects. The desired objects (in this case, circular or possibly ellipsoidal) are then selected automatically from the above set and stored with their parametric representations. From this data, dropsize distributions as a function of spatial coordinates can be generated and combustion effects due to hardware and/or physical variables studied.

Feinstein, S. P.↗
DOE OSTI2026

Automated Signal Timing Plan Reconstruction Using High-Resolution Event-Based Controller Data for Digital Twins

Transportation digital twins are essential tools for evaluating emerging technologies such as connected and automated vehicles, adaptive traffic signal control, and mobility optimization strategies. Realistic digital twins require accurate emulation of real-world signal controllers and detailed signal timing plans. However, signal timing plans are often unavailable or difficult to access, forcing researchers and modelers to rely on assumed fixed timings or halt their analysis. To overcome this challenge, we present a method that directly estimates signal timing plan parameters using high-resolution, event-based data from traffic signal controllers. The proposed method extracts key parameters, including cycle length, offset, phase sequence, coordinated phases, phase-specific minimum and maximum green durations, vehicle extensions, and splits under coordination. A rule-based deterministic signal timing reconstruction algorithm based on traffic signal operation rules, such as those outlined in the Signal Timing Manual, is developed and validated. We evaluate this method, which uses high-resolution controller event logs and verified signal timing plans, on 94 signalized intersections in Nashville, Tennessee, demonstrating their ability to generate accurate, simulation-ready signal timing plans for tools such as SUMO and Vissim.

Saroj, Abhilasha [ORNL] (ORCID:0000000191178063)↗
NASA NTRS1998

Application of the Shuttle Laser Altimeter in an Accuracy Assessment of Global 1-Kilometer Digital Elevation Data

Shuttle Laser Altimeter (SLA) data have been used to evaluate the accuracy of GTOPO30, the first comprehensive, 1 km resolution, global topographic data set. GTOPO30 was developed by the USGS Eros Data Center (EDC), in part, to address NASA's needs for a global topographic model in support of remote sensing instruments aboard the Earth Observing System AM-1 spacecraft. SLA flew as a part of the STS-72 mission in January, 1996 observing the latitude band from +/- 28.5 deg, and on STS-85 in August, 1997 extending the observations to +/- 57 deg. Combining the SLA ranging data with shuttle position and pointing knowledge yields surface elevation data of very high vertical accuracy in an Earth-centered, absolute reference frame (2.8 m rms difference for SLA-01 with respect to ocean reference surface). Use of the well-determined mean sea surface reference for calibration allows propagation of high accuracy altimetry onto the continents. 436,635 SLA-01 land elevations were compared to the GTOPO30 grid after conversion to a mean sea level vertical datum using the Earth Geoid Model 96, jointly developed by Goddard and NIMA. The comparison reveals systematic elevation biases in southern Asia, Africa, Australia, and south America on the order 10's to 100 meters in the GTOPO30 compilation on spatial scales of 100's to 1000's of kilometers. These biases are likely due to vertical datum errors in the topographic source materials used to compile GTOPO30, which primarily consist of Defense Mapping Agency (DMA) digital elevation and topographic map products. These biases imply that elevation corrections applied to land gravity measurements using these DMA source materials will be biased, leading to errors in geoid models incorporating these land gravity data.

Harding, David J.↗
NASA NTRS1994

Automation of reverse engineering process in aircraft modeling and related optimization problems

During the year of 1994, the engineering problems in aircraft modeling were studied. The initial concern was to obtain a surface model with desirable geometric characteristics. Much of the effort during the first half of the year was to find an efficient way of solving a computationally difficult optimization model. Since the smoothing technique in the proposal 'Surface Modeling and Optimization Studies of Aerodynamic Configurations' requires solutions of a sequence of large-scale quadratic programming problems, it is important to design algorithms that can solve each quadratic program in a few interactions. This research led to three papers by Dr. W. Li, which were submitted to SIAM Journal on Optimization and Mathematical Programming. Two of these papers have been accepted for publication. Even though significant progress has been made during this phase of research and computation times was reduced from 30 min. to 2 min. for a sample problem, it was not good enough for on-line processing of digitized data points. After discussion with Dr. Robert E. Smith Jr., it was decided not to enforce shape constraints in order in order to simplify the model. As a consequence, P. Dierckx's nonparametric spline fitting approach was adopted, where one has only one control parameter for the fitting process - the error tolerance. At the same time the surface modeling software developed by Imageware was tested. Research indicated a substantially improved fitting of digitalized data points can be achieved if a proper parameterization of the spline surface is chosen. A winning strategy is to incorporate Dierckx's surface fitting with a natural parameterization for aircraft parts. The report consists of 4 chapters. Chapter 1 provides an overview of reverse engineering related to aircraft modeling and some preliminary findings of the effort in the second half of the year. Chapters 2-4 are the research results by Dr. W. Li on penalty functions and conjugate gradient methods for quadratic programming problems.

Li, W.↗