Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed clustering methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

CONSTRAINING SOURCE REDSHIFT DISTRIBUTIONS WITH GRAVITATIONAL LENSING

We introduce a new method for constraining the redshift distribution of a set of galaxies, using weak gravitational lensing shear. Instead of using observed shears and redshifts to constrain cosmological parameters, we ask how well the shears around clusters can constrain the redshifts, assuming fixed cosmological parameters. This provides a check on photometric redshifts, independent of source spectral energy distribution properties and therefore free of confounding factors such as misidentification of spectral breaks. We find that {approx}40 massive ({sigma}{sub v} = 1200 km s{sup -1}) cluster lenses are sufficient to determine the fraction of sources in each of six coarse redshift bins to {approx}11%, given weak (20%) priors on the masses of the highest-redshift lenses, tight (5%) priors on the masses of the lowest-redshift lenses, and only modest (20%-50%) priors on calibration and evolution effects. Additional massive lenses drive down uncertainties as N{sub lens}{sup -1/2}, but the improvement slows as one is forced to use lenses further down the mass function. Future large surveys contain enough clusters to reach 1% precision in the bin fractions if the tight lens-mass priors can be maintained for large samples of lenses. In practice this will be difficult to achieve, but the method may be valuable as a complement to other more precise methods because it is based on different physics and therefore has different systematic errors.

79 ASTRONOMY AND ASTROPHYSICS↗

Euclid preparation: IV. Impact of undetected galaxies on weak-lensing shear measurements

In modern weak-lensing surveys, the common approach to correct for residual systematic biases in the shear is to calibrate shape measurement algorithms using simulations. These simulations must fully capture the complexity of the observations to avoid introducing any additional bias. In this paper we study the importance of faint galaxies below the observational detection limit of a survey. We simulate simplified Euclid VIS images including and excluding this faint population, and measure the shift in the multiplicative shear bias between the two sets of simulations. We measure the shear with three different algorithms: a moment-based approach, model fitting, and machine learning. We find that for all methods, a spatially uniform random distribution of faint galaxies introduces a shear multiplicative bias of the order of a few times 10 -3 . This value increases to the order of 10 -2 when including the clustering of the faint galaxies, as measured in the Hubble Space Telescope Ultra-Deep Field. The magnification of the faint background galaxies due to the brighter galaxies along the line of sight is found to have a negligible impact on the multiplicative bias. We conclude that the undetected galaxies must be included in the calibration simulations with proper clustering properties down to magnitude 28 in order to reach a residual uncertainty on the multiplicative shear bias calibration of a few times 10 -4 , in line with the 2 × 10 -3 total accuracy budget required by the scientific objectives of the Euclid survey. We propose two complementary methods for including faint galaxy clustering in the calibration simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Unsupervised Power System Event Detection and Classification Using Unlabeled PMU Data

This paper proposes a novel data-driven power system event detection and classification method based on 5TB of actual PMU measurements collected from the US western interconnect. Firstly, a set of comprehensive power quality rules are proposed to pre-filter the raw data and extract the regions of interest (ROI). Six distinct event categories are defined and corresponding patterns are chosen as references. Meanwhile, detailed characteristics of patterns are summarized to enhance our understanding of the actual events. Then, the time-independent feature vectors are generated by extracting the statistical, temporal, and spectral features from the raw time-series data. Furthermore, an ensemble model is proposed to cluster the events by combining multiple K-means clustering models using a voting strategy. Besides, both system-level and PMU-level clustering models are developed. The accuracy and robustness of the event detection method are further improved through interactive evaluation of the two-level clustering results. This paper summarizes the actual characteristics of each event category and provides a reliable basis for accurate label generation. The experiments demonstrate the effectiveness of the proposed event detection and classification method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Unsupervised Power System Event Detection and Classification Using Unlabeled PMU Data

This paper proposes a novel data-driven power system event detection and classification method based on 5TB of actual PMU measurements collected from the US western interconnect. Firstly, a set of comprehensive power quality rules are proposed to pre-filter the raw data and extract the regions of interest (ROI). Six distinct event categories are defined and corresponding patterns are chosen as references. Meanwhile, detailed characteristics of patterns are summarized to enhance our understanding of the actual events. Then, the time-independent feature vectors are generated by extracting the statistical, temporal, and spectral features from the raw time-series data. Furthermore, an ensemble model is proposed to cluster the events by combining multiple K-means clustering models using a voting strategy. Besides, both system-level and PMU-level clustering models are developed. The accuracy and robustness of the event detection method are further improved through interactive evaluation of the two-level clustering results. This paper summarizes the actual characteristics of each event category and provides a reliable basis for accurate label generation. The experiments demonstrate the effectiveness of the proposed event detection and classification method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Performance Improvements to the Cross Section Calculation in MPACT

The MPACT code is the primary deterministic neutron transport solver available in the Virtual Environment for Reactor Applications (VERA) as part of the Consortium for Advanced Simulation of Light Water Reactors (CASL). In contrast to the conventional two-step method using homogenization techniques, MPACT employs a direct transport methodology, where the transport calculation is performed with the explicit reactor core geometry, material compositions, and temperature distribution. As the direct whole-core transport calculation requires significant computational resources, performance improvements have been recently conducted in various components of MPACT. The initial MPACT profiling was performed on the EOS cluster at the Oak Ridge Leadership Computing Facility. Table I shows that the cross section processing accounted for 74% and 33% of the total runtime for VERA Progression Problems 5 and 7. Starting with a problem-independent multigroup (MG) library, two primary functionalities are performed in MPACT to obtain the problem-dependent MG cross sections: (1) the resonance self-shielding calculation, which currently MPACT is approaching with the subgroup method; (2) use of equivalence cross section from resonance calculation to compute the microscopic cross sections, and thus, the macroscopic cross sections of material regions. As shown in Table I, the time distribution in cross section processing varies from case to case. For Problem 5, a 2-D quarter core depletion case, the macroscopic XS dominates due to the increased number of isotopes in the depleted fuel. For Problem 7, a 3-D quarter core PWR at HFP and BOL, more subgroup calculations are performed to obtain updated self-shielded cross sections during the iteration. In this summary, the approaches to reduce the computing time in cross section processing are presented. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of the isoscalar monopole response in the proton-rich nucleus 14 O

Deuteron inelastic scattering on 14 O was measured in inverse kinematics using an active-target time projection chamber and a magnetic spectrograph. The experimental technique enabled precise measurements of deuteron recoiling particles in coincidence with beam-like fragments detected in the spectrograph focal plane. The double differential cross section was reconstructed for scattering angles of 3–6 degrees and excitation energies up to 26 MeV. The monopole strength distribution was obtained from the data using a multipole decomposition analysis. The results were compared to quasiparticle random-phase approximation (QRPA) and generator coordinate method (GCM) calculations. The QRPA calculation accurately describes experimental data in the energy range of 13 to 26 MeV. GCM calculations assuming a 12 C (g . s .) + p + p cluster configuration were used to determine the 0 + strength in 14 O below 13 MeV. The monopole transition strength of these cluster states provides a good description of the experimental distribution in the 9–11 MeV region, while the 0$^{+}_{2}$ state accounts for only a small fraction of the experimental strength around 6 MeV.

Active target↗

Model-independent determination of the astrophysical S factor in laser-induced fusion plasmas

In this paper, we present a new and general method for measuring the astrophysical S factor of nuclear reactions in laser-induced plasmas and we apply it to 2 H(d,n) 3 He. The experiment was performed with the Texas Petawatt Laser, which delivered 150–270 fs pulses of energy ranging from 90 to 180 J to D 2 or CD 4 molecular clusters (where D denotes 2 H). After removing the background noise, we used the measured time-of-flight data of energetic deuterium ions to obtain their energy distribution. We derive the S factor using the measured energy distribution of the ions, the measured volume of the fusion plasma, and the measured fusion yields. This method is model independent in the sense that no assumption on the state of the system is required, but it requires an accurate measurement of the ion energy distribution, especially at high energies, and of the relevant fusion yields. In the 2 H(d,n) 3 He and 3 He(d,p) 4 He cases discussed here, it is very important to apply the background subtraction for the energetic ions and to measure the fusion yields with high precision. While the available data on both ion distribution and fusion yields allow us to determine with good precision the S factor in the d+d case (lower Gamow energies), for the d+ 3 He case the data are not precise enough to obtain the S factor using this method. Our results agree with other experiments within the experimental error, even though smaller values of the S factor were obtained. This might be due to the plasma environment differing from the beam target conditions in a conventional accelerator experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural Changes during the Growth of Atomically Precise Metal Oxido Nanoclusters from Combined Pair Distribution Function and Small-Angle X-ray Scattering Analysis

The combination of in situ pair distribution function (PDF) analysis and small-angle X-ray scattering (SAXS) enables analysis of the formation mechanism of metal oxido nanoclusters and cluster–solvent interactions as they take place. Herein, we demonstrate the method for the formation of clusters with a [Bi 38 O 45 ] core. Upon dissolution of crystalline [Bi 6 O 5 (OH) 3 (NO 3 ) 5 ]∙3 H 2 O in DMSO, an intermediate rapidly forms, which slowly grows to stable [Bi 38 O 45 ] clusters. To identify the intermediate, we developed an automated modeling method, where smaller [Bi x O y ] structures based on the [Bi 38 O 45 ] framework are tested against the data. [Bi 22 O 26 ] was identified as the main intermediate species, illustrating how combined PDF and SAXS analysis is a powerful tool to gain insight into nucleation on an atomic scale. PDF also provides information on the interaction between nanoclusters and solvent, which is shown to depend on the nature of the ligands on the cluster surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-neutron removal strength of {sup 7}He into {sup 6}He using the complex scaling method

We study the one-neutron removal strength of the {sup 7}He ground state, which provides us with the {sup 6}He-n component in {sup 7}He. The He isotopes are described on the basis of the {sup 4}He+Xn cluster model (X=1,2,3). The complex scaling method is applied to describe not only the Gamow resonances but also the nonresonant continuum states of valence neutrons, with the correct boundary condition of particle decays. The one-neutron removal strength of {sup 7}He into the unbound states of {sup 6}He is calculated using the complex-scaled Green's function, in which a complex-scaled complete set of {sup 4}He+n+n states is adopted. Using this framework, we investigate resonant and nonresonant contributions of the strength, which individually produce specific structures in the distributions. In addition, we propose a method to obtain the real-value strength using the complex values of spectroscopic factors of Gamow states. As a result, the {sup 6}He(2{sup +}) resonance is found to give the largest contribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Constraining IGM enrichment and metallicity with the C iv forest correlation function

ABSTRACT The distribution and abundance of metals in the diffuse intergalactic medium (IGM) have implications for galaxy formation and evolution models, and has been argued to be sensitive to the Universe’s reionization history. However, reduced sensitivity in the near-IR implies that probing IGM metals at z > 4 is currently out of reach with the traditional method of detecting individual absorbers. We present a new technique based on clustering analysis that enables the detection of these weak IGM absorbers. We investigate the two-point correlation function (2PCF) of the ${\rm C\, {\small IV}}$ forest as a probe of IGM metallicity and enrichment topology by simulating the z = 4.5 IGM with models of inhomogeneous metal distributions. The 2PCF of the ${\rm C\, {\small IV}}$ forest demonstrates a clear peak at a characteristic separation corresponding to the doublet separation of the ${\rm C\, {\small IV}}$ line.The peak amplitude scales quadratically with metallicity, while enrichment topology affects both the shape and amplitude of the 2PCF. For models consistent with the distribution of metals at z ∼ 3, we find that we can constrain [C/H] to within 0.2 dex, log$\, M_{\rm {min}}$ to within 0.4 dex, and R to within 15 per cent. We show that CGM absorbers can be reliably identified and masked, thus recovering the underlying IGM signal. The auto-correlation of the metal-line forest presents a compelling avenue to constrain the IGM metallicity and enrichment topology with high precision at z > 4, thereby pushing such measurements into the Epoch of Reionization.

79 ASTRONOMY AND ASTROPHYSICS↗

Oxygen point defect accumulation in single-phase U O 2 + x

UO 2.07 was characterized using neutron total scattering in order to elucidate defect morphology in the low oxygen-to-metal regime (x < 0.125 for UO 2+x ). Data were collected at temperatures (600 and 1000 °C) coinciding with the single-phase UO 2+x region of the established phase diagram, and results were compared with data of stoichiometric UO 2 collected at near-identical temperatures. Experimental data were modeled and interpreted using a holistic approach employing a combination of analyses that characterized multiple spatial length scales. Preferential modeling of long-range atomic arrangements with Rietveld refinement suggests the existence of primarily monointerstitials in UO 2.07 , whereas preferential modeling of short-range atomic structures with small-box pair distribution function (PDF) refinement indicates the presence of defect clusters in UO 2.07 . Simultaneous modeling of multiple length scales using complementary reverse Monte Carlo (RMC) and molecular dynamics (MD) methods confirms that excess oxygen atoms in UO 2.07 exist as small defects, such as monointerstitials and di-interstitials. RMC and MD results agree with diffraction analysis but differ significantly from small-box PDF refinements, which may be related to a lack of intermediate- and long-range structural information gained from the small-box PDF refinement procedure. Employing a combination of analysis methods with varying length-scale sensitivities enabled more accurate assessment of the UO 2+x defect structure. Furthermore, our findings provide experimental support for previously predicted di-interstitial defect morphologies in UO 2+x that highly influence the accurate prediction of bulk physiochemical properties of UO 2+x , such as oxygen diffusivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extended CO(7-6) emission from warm gas in Orion

Results of a search for extended CO(7-6) line emission in the Orion A molecular cloud using the University of Texas submillimeter laser heterodyne receiver are presented. The large-scale distribution of quiescent CO(7-6) emission is mapped along a cut across the Trapezium cluster extending more than 13 arcmin (nearly 2 pc) in R.A. The receiver, observing method, and calibration techniques are described, and the CO(7-6) spectra and maps are presented. The physical parameters and energetics of the molecular gas are discussed. The findings are compared with observations of other high-luminosity star-forming regions.

Howe, J. E.↗

Kinetics and energy states of nanoclusters in the initial stage of homogeneous condensation at high supersaturation degrees

The condensation of metal vapor in an inert gas is studied by the molecular dynamics method. Two condensation regimes are investigated: with maintenance of partial pressure of the metal vapor and with a fixed number of metal atoms in the system. The main focus is the study of the cluster energy distribution over the degrees of freedom and mechanisms of the establishment of thermal equilibrium. It is shown that the internal temperature of a cluster considerably exceeds the buffer gas temperature and the thermal balance is established for a time considerably exceeding the nucleation time. It is found that, when the metal vapor concentration exceeds 0.1 of the argon concentration, the growth of clusters with the highest possible internal energy occurs, the condensation rate being determined only by the rate of heat removal from clusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A direct method for the solution of unsteady two-dimensional incompressible Navier-Stokes equations

The unsteady incompressible Navier-Stokes equations are formulated in terms of vorticity and stream function in generalized curvilinear orthogonal coordinates to facilitiate analysis of flow configurations with general geometries. The numerical method developed solves the conservative form of the transport equation using the alternating-direction implicit method, whereas the stream-function equation is solved by direct block Gaussian elimination. The method is applied to a model problem of flow over a back-step in a doubly infinite channel, using clustered conformal coordinates. One-dimensional stretching functions, dependent on the Reynolds number and the asymptotic behavior of the flow, are used to provide suitable grid distribution in the separation and reattachment regions, as well as in the inflow and outflow regions. The optimum grid distribution selected attempts to honor the multiple length scales of the separated-flow model problem. The asymptotic behavior of the finite-differenced transport equation near infinity is examined and the numerical method is carefully developed so as to lead to spatially second-order accurate wiggle-free solutions, i.e., with minimum dispersive error. Results have been obtained in the entire laminar range for the backstep channel and are in good agreement with the available experimental data for this flow problem.

Ghia, K. N.↗

An improved time-of-flight method for cluster deposition and ion-scattering experiments

A molecular beam apparatus has been developed for deposition and scattering experiments of size-selected clusters. The new setup combines a bimetallic laser ablation cluster source with a collinear time-of-flight mass spectrometer. Mass selection is achieved with a pulsed electrostatic mirror. A significantly improved transmission in combination with a reduction of the kinetic energy distribution of the mass selected clusters has been obtained. Without further modification of the apparatus, surface-induced dissociation of mass selected tin clusters has been investigated, demonstrating the possibility to combine cluster beam deposition and scattering experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advanced treatment planning methods for efficient radiation therapy with laser accelerated proton and ion beams

Purpose: Laser plasma acceleration can potentially replace large and expensive cyclotrons or synchrotrons for radiotherapy with protons and ions. On the way toward a clinical implementation, various challenges such as the maximum obtainable energy still remain to be solved. In any case, laser accelerated particles exhibit differences compared to particles from conventional accelerators. They typically have a wide energy spread and the beam is extremely pulsed (i.e., quantized) due to the pulsed nature of the employed lasers. The energy spread leads to depth dose curves that do not show a pristine Bragg peak but a wide high dose area, making precise radiotherapy impossible without an additional energy selection system. Problems with the beam quantization include the limited repetition rate and the number of accelerated particles per laser shot. This number might be too low, which requires a high repetition rate, or it might be too high, which requires an additional fluence selection system to reduce the number of particles. Trying to use laser accelerated particles in a conventional way such as spot scanning leads to long treatment times and a high amount of secondary radiation produced when blocking unwanted particles. Methods: The authors present methods of beam delivery and treatment planning that are specifically adapted to laser accelerated particles. In general, it is not necessary to fully utilize the energy selection system to create monoenergetic beams for the whole treatment plan. Instead, within wide parts of the target volume, beams with broader energy spectra can be used to simultaneously cover multiple axially adjacent spots of a conventional dose delivery grid as applied in intensity modulated particle therapy. If one laser shot produces too many particles, they can be distributed over a wider area with the help of a scattering foil and a multileaf collimator to cover multiple lateral spot positions at the same time. These methods are called axial and lateral clustering and reduce the number of particles that have to be blocked in the beam delivery system. Furthermore, the optimization routine can be adjusted to reduce the number of dose spots and laser shots. The authors implemented these methods into a research treatment planning system for laser accelerated particles. Results: The authors' proposed methods can decrease the amount of secondary radiation produced when blocking particles with wrong energies or when reducing the total number of particles from one laser shot. Additionally, caused by the efficient use of the beam, the treatment time is reduced considerably. Both improvements can be achieved without extensively changing the quality of the treatment plan since conventional intensity modulated particle therapy usually includes a certain amount of unused degrees of freedom which can be used to adapt to laser specific properties. Conclusions: The advanced beam delivery and treatment planning methods reduce the need to have a perfect laser-based accelerator reproducing the properties of conventional accelerators that might not be possible without increasing treatment time and secondary radiation to the patient. The authors show how some of the differences to conventional beams can be overcome and efficiently used for radiation treatment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

THE PANCHROMATIC HUBBLE ANDROMEDA TREASURY. IV. A PROBABILISTIC APPROACH TO INFERRING THE HIGH-MASS STELLAR INITIAL MASS FUNCTION AND OTHER POWER-LAW FUNCTIONS

We present a probabilistic approach for inferring the parameters of the present-day power-law stellar mass function (MF) of a resolved young star cluster. This technique (1) fully exploits the information content of a given data set; (2) can account for observational uncertainties in a straightforward way; (3) assigns meaningful uncertainties to the inferred parameters; (4) avoids the pitfalls associated with binning data; and (5) can be applied to virtually any resolved young cluster, laying the groundwork for a systematic study of the high-mass stellar MF (M {approx}> 1 M {sub Sun }). Using simulated clusters and Markov Chain Monte Carlo sampling of the probability distribution functions, we show that estimates of the MF slope, {alpha}, are unbiased and that the uncertainty, {Delta}{alpha}, depends primarily on the number of observed stars and on the range of stellar masses they span, assuming that the uncertainties on individual masses and the completeness are both well characterized. Using idealized mock data, we compute the theoretical precision, i.e., lower limits, on {alpha}, and provide an analytic approximation for {Delta}{alpha} as a function of the observed number of stars and mass range. Comparison with literature studies shows that {approx}3/4 of quoted uncertainties are smaller than the theoretical lower limit. By correcting these uncertainties to the theoretical lower limits, we find that the literature studies yield ({alpha}) = 2.46, with a 1{sigma} dispersion of 0.35 dex. We verify that it is impossible for a power-law MF to obtain meaningful constraints on the upper mass limit of the initial mass function, beyond the lower bound of the most massive star actually observed. We show that avoiding substantial biases in the MF slope requires (1) including the MF as a prior when deriving individual stellar mass estimates, (2) modeling the uncertainties in the individual stellar masses, and (3) fully characterizing and then explicitly modeling the completeness for stars of a given mass. The precision on MF slope recovery in this paper are lower limits, as we do not explicitly consider all possible sources of uncertainty, including dynamical effects (e.g., mass segregation), unresolved binaries, and non-coeval populations. We briefly discuss how each of these effects can be incorporated into extensions of the present framework. Finally, we emphasize that the technique and lessons learned are applicable to more general problems involving power-law fitting.

79 ASTRONOMY AND ASTROPHYSICS↗

Mapping causal patterns in crystalline solids

The evolution of the atomic structures of the combinatorial library of Sm-substituted thin film BiFeO 3 along the phase transition boundary from the ferroelectric rhombohedral phase to the non-ferroelectric orthorhombic phase is explored using scanning transmission electron microscopy. Localized properties, including polarization, lattice parameter, and chemical composition, are parameterized from atomic-scale imaging, and their causal relationships are reconstructed using a linear non-Gaussian acyclic model. This approach is further extended to explore the spatial variability of the causal coupling using the sliding window transform method, which revealed that new causal relationships emerged at both the expected locations, such as domain walls and interfaces, and at additional regions forming clusters in the vicinity of the walls or spatially distributed features. While the exact physical origins of these relationships are unclear, they likely represent nanophase-separated regions in the morphotropic phase boundaries. Overall, we posit that an in-depth understanding of complex disordered materials away from thermodynamic equilibrium necessitates understanding not only the generative processes that can lead to observed microscopic states but also the causal links between multiple interacting subsystems.

Causal inference↗