Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrolyte solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Multistack nickel-hydrogen units

A typical 625 Inconel pressure vessel, equipped with four thermocouples, has voltage taps not only for the cell, but for each of the several packs inside the container. In a two-stack design, a weld ring is used to separate the packs which, joined together, form one solid group. In the four-stack design, stacks are separated mechanically with about half inch Plexiglas and are connected through the center. Electrolytes are forced out by vacuum. The two stack design is intended for 500 psi and was pressure tested up to 1,000. The problem of electrolyte shorts is discussed and possible solutions for its correction are given.

Smith, J.↗
NASA NTRS1988

Some implications of colloid stability theory for protein crystallization

Colloid stability theory has been applied to protein crystallization and predicts a narrow range of conditions under which crystals can be grown without the agglomeration of protein molecules (colloids) in the bulk solution. It also predicts a critical electrolyte concentration above which agglomeration will always occur. Using this theory, the rapid protein agglomeration occurring during Schlieren experiments as well as a terminal crystal size effect in a fixed container were explained. Following this concept, the supposed 'terminal' crystal size has been at least doubled.

Young, C. C.↗
NASA NTRS1998

Method for Surface Texturing Titanium Products

The present invention teaches a method of producing a textured surface upon an arbitrarily configured titanium or titanium alloy object for the purpose of improving bonding between the object and other materials such as polymer matrix composites and/or human bone for the direct in-growth of orthopaedic implants. The titanium or titanium alloy object is placed in an electrolytic cell having an ultrasonically agitated solution of sodium chloride therein whereby a pattern of uniform "pock mark" like pores or cavities are produced upon the object's surface. The process is very cost effective compared to other methods of producing rough surfaces on titanium and titanium alloy components. The surface textures produced by the present invention are etched directly into the parent metal at discrete sites separated by areas unaffected by the etching process. Bonding materials to such surface textures on titanium or titanium alloy can thus support a shear load even if adhesion of the bonding material is poor.

Banks, Bruce A.↗
NASA NTRS2002

Hydrogen generation by electrolysis of aqueous organic solutions

A device for electrolysis of an aqueous solution of an organic fuel. The electrolyte is a solid-state polymer membrane with anode and cathode catalysts on both surfaces for electro-oxidization and electro-reduction. A low-cost and portable hydrogen generator can be made based on the device with organic fuels such as methanol.

Narayanan, Sekharipuram R.↗
NASA NTRS2002

Hydrogen generation by electrolysis of aqueous organic solutions

A device for electrolysis of an aqueous solution of an organic fuel. The electrolyte is a solid-state polymer membrane with anode and cathode catalysts on both surfaces for electro-oxidization and electro-reduction. A low-cost and portable hydrogen generator can be made based on the device with organic fuels such as methanol.

Narayanan, Sekharipuram R.↗
NASA NTRS2006

Hydrogen generation by electrolysis of aqueous organic solutions

A device for electrolysis of an aqueous solution of an organic fuel. The electrolyte is a solid-state polymer membrane with anode and cathode catalysts on both surfaces for electro-oxidization and electro-reduction. A low-cost and portable hydrogen generator can be made based on the device with organic fuels such as methanol.

Narayanan, Sekharipuram R.↗
NASA NTRS2009

NiF2/NaF:CaF2/Ca Solid-State High-Temperature Battery Cells

Experiments and theoretical study have demonstrated the promise of all-solid-state, high-temperature electrochemical battery cells based on NiF2 as the active cathode material, CaF2 doped with NaF as the electrolyte material, and Ca as the active anode material. These and other all-solid-state cells have been investigated in a continuing effort to develop batteries for instruments that must operate in environments much hotter than can be withstood by ordinary commercially available batteries. Batteries of this type are needed for exploration of Venus (where the mean surface temperature is about 450 C), and could be used on Earth for such applications as measuring physical and chemical conditions in geothermal wells and oil wells. All-solid-state high-temperature power cells are sought as alternatives to other high-temperature power cells based, variously, on molten anodes and cathodes or molten eutectic salt electrolytes. Among the all-solid-state predecessors of the present NiF2/NaF:CaF2/Ca cells are those described in "Solid-State High-Temperature Power Cells" (NPO-44396), NASA Tech Briefs, Vol. 32, No. 5 (May 2008), page 40. In those cells, the active cathode material is FeS2, the electrolyte material is a crystalline solid solution of equimolar amounts of Li3PO4 and LiSiO4, and the active anode material is Li contained within an alloy that remains solid in the intended high operational temperature range.

West, William↗
DOE OSTI2020

Electrocatalytic hydrogenation of muconic acid

Various embodiments disclosed relate to electrocatalytic hydrogenation of muconic acid and polymers formed from the reaction products thereof. In various embodiments, the present invention provides an electrocatalytic method to prepare 3-hexene-1,6-dioic acid, 2-hexene-1,6-dioic acid, adipic acid, or a combination thereof, from muconic acid. The method includes passing current through a catalytic cathode in a reactor including an aqueous acidic solution including muconic acid, a supporting electrolyte, and an anode, so as to generate atomic hydrogen on the cathode surface in an amount effective to hydrogenate the muconic acid to yield a product including 3-hexene-1,6-dioic acid, 2-hexene-1,6-dioic acid, adipic acid, or a mixture thereof. Also disclosed is the polymerization of 3-hexene-1,6-dioic acid, 2-hexene-1,6-dioic acid, or a combination thereof with another compound, such as a diamine or a dialcohol, to form a polymer, such as a polyamide or a polyester.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Production of chemical products using electrochemical flow systems and slug flow and associated methods

Systems and methods for electrochemically producing chemical products are provided. In certain cases, the systems and methods described herein are capable of producing chemical products such as hydrogen peroxide in solutions with relatively low concentrations of electrolyte or other dissolved species at high efficiencies and/or low energetic cost. In some cases, redox mediators are used to temporally decouple direct electrochemical processes from the production of the chemical product.

Voskian, Sahag↗
DOE OSTI2023

Production of chemical products using electrochemical flow systems and mediators and associated methods

Systems and methods for electrochemically producing chemical products are provided. In certain cases, the systems and methods described herein are capable of producing chemical products such as hydrogen peroxide in solutions with relatively low concentrations of electrolyte or other dissolved species at high efficiencies and/or low energetic cost. In some cases, redox mediators are used to spatially decouple direct electrochemical processes from the production of the chemical product.

Murray, Alexander↗
NASA NTRS1973

A simple model of fluid flow and electrolyte balance in the body

The model is basically a three-compartment model, the three compartments being the plasma, interstitial fluid and cellular fluid. Sodium, potassium, chloride and urea are the only major solutes considered explicitly. The control of body water and electrolyte distribution is affected via drinking and hormone levels. Basically, the model follows the effect of various oral input water loads on solute and water distribution throughout the body.

White, R. J.↗
DOE OSTI2021

Uranium In Situ Electrolytic Deposition with a Reusable Functional Graphene-Foam Electrode

Nuclear fission produces 400 GWe which represents 11% of the global electricity output. Uranium is the essential element as both fission fuel and radioactive waste. Therefore, the recovery of uranium is of great importance. In this study, an in situ electrolytic deposition method to extract uranium from aqueous solution is reported. A functionalized reduced graphene oxide foam (3D-FrGOF) is used as the working electrode, which acts as both a hydrogen evolution reaction catalyst and a uranium deposition substrate. The specific electrolytic deposition capacity for U(VI) ions with the 3D-FrGOF is 4560 mg g –1 without reaching saturation, and the Coulombic efficiency can reach 54%. Moreover, reduction of the uranium concentration in spiked seawater from 3 ppm to 19.9 ppb is achieved, which is lower than the US Environmental Protection Agency uranium limits for drinking water (30 ppb). Furthermore, the collection electrode can be efficiently regenerated and recycled at least nine times without much efficiency fading, by ejecting into 2000 ppm concentrated uranium solution in a second bath with reverse voltage bias. All these findings open new opportunities in using free-standing 3D-FrGOF electrode as an advanced separation technique for water treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Life cycle analysis of a hydrogen production system based on solid oxide electrolysis cells integrated with different energy and wastewater sources

Hydrogen production via water electrolysis is a promising and evolving technology. The solid oxide electrolysis cell (SOEC) is one of the several technologies for this purpose. They are alternatives to the traditional hydrogen production from fossil fuels to enhance global energy decarbonization. However, in the bid for sustainability and a green economy, these technologies are not free from causing some environmental burdens. Using life cycle assessment (LCA), the greenhouse gas emission and degree of environmental impacts by these technologies can be identified and measured throughout their lifespan. This study addresses how to quantify these CO 2 emission impacts for an electrolytic system with different energy sources. The LCA of a novel integrated hydrogen production SOEC system with energy from solar photovoltaic and bituminous powerplant is performed using simaPro, the leading global LCA solution software. Measuring the environmental impact of the electrolytic operation in terms of weight, the bituminous powerplant poses damage which is, on average 700% more than solar PV. The thermal-to-hydrogen efficiency of the SOEC system is 56%, and a probable 28% reduction in carbon footprint with heat integration. The steam generation and the manufacturing of the SOEC have a very high environmental impact potential on the system. Here, we recommend LCA and net energy analysis is carried out for every new hydrogen technology and adequate comparison to enhance sustainable and green economy.

08 HYDROGEN↗
DOE OSTI2024

The Interplay of Solvation and Polarization Effects on Ion Pairing in Nanoconfined Electrolytes

The nature of ion–ion interactions in electrolytes confined to nanoscale pores has important implications for energy storage and separation technologies. However, the physical effects dictating the structure of nanoconfined electrolytes remain debated. Here we employ machine-learning-based molecular dynamics simulations to investigate ion–ion interactions with density functional theory level accuracy in a prototypical confined electrolyte, aqueous NaCl within graphene slit pores. We find that the free energy of ion pairing in highly confined electrolytes deviates substantially from that in bulk solutions, observing a decrease in contact ion pairing but an increase in solvent-separated ion pairing. These changes arise from an interplay of ion solvation effects and graphene’s electronic structure. Notably, the behavior observed from our first-principles-level simulations is not reproduced even qualitatively with the classical force fields conventionally used to model these systems. The insight provided in this work opens new avenues for predicting and controlling the structure of nanoconfined electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effects of oxide surface chemistry on diffusioosmosis

Diffusioosmosis is the movement of fluid induced by gradients in solute concentration. Recent studies suggest that in low permeability rocks, it may be the dominant mode of reactant transport and thus control rates of diagenesis, which cannot be adequately explained by pressure-driven flow alone. In this paper we investigate how the equilibrium between an oxide mineral and the surrounding fluid phase influences the diffusioosmotic velocity. We have developed a theory for the case of a thin double layer, where the Debye length is smaller than the characteristic pore size. Several factors contribute to the total fluid velocity: the chemical structure of the mineral surface, the electrolyte type and concentration gradient, and the solution pH. Individual factors can act in concert or in opposition, leading to widely varying magnitudes and directions of the velocity. The numerical results are within the range of the limited experimental data. Our results highlight how surface charging and surface complexation impact the flow, and how they depend on pH.

Diagenesis↗
DOE OSTI2026

Average hydrodynamic radius analysis reveals critical solvation thresholds in high-concentration lithium electrolytes

Understanding the solvation structures of lithium salts in carbonate- and ether-based electrolytes is central to explaining the exceptional stability of high-concentration electrolytes (HCEs) and localized high-concentration electrolytes (LHCEs). Conventional techniques such as vibrational spectroscopy and one-dimensional NMR provide only limited information, typically restricted to coordination ratios and ion-pair distributions, without revealing the actual size and mass of solution complexes. Here, in this study, we introduce an average hydrodynamic radius (AHR) analysis based on internally referenced DOSY NMR, which enables direct estimation of the average volume and molecular weight of lithium–solvent complexes in solution. Using LiFSI–EMC and LiFSI–EMC–TTE electrolytes, we demonstrate that the onset of effective lithium metal stabilization and aluminum corrosion suppression coincides with the formation of very large complexes, whose average volume exceeds 300 times that of free EMC molecules. This finding supports a new “blocking mechanism,” wherein bulky solvated complexes impede direct solvent access to reactive surfaces. The AHR analysis thus not only clarifies the fundamental origin of HCE and LHCE effectiveness, but also provides a broadly applicable experimental framework for probing complex solvation structures and guiding rational electrolyte design.

Concentrated electrolytes↗
DOE OSTI2022

Recent Advances in Conduction Mechanisms, Synthesis Methods, and Improvement Strategies for Li 1+ x Al x Ti 2-x (PO 4 ) 3 Solid Electrolyte for All-Solid-State Lithium Batteries

With the increasing use of Li batteries for storage, their safety issues and energy densities are attracting considerable attention. Recently, replacing liquid organic electrolytes with solid-state electrolytes (SSE) has been hailed as the key to developing safe and high-energy-density Li batteries. In particular, Li 1+ x Al x Ti 2- x (PO4) 3 (LATP) has been identified as a very attractive SSE for Li batteries due to its excellent electrochemical stability, low production costs, and good chemical compatibility. However, interfacial reactions with electrodes and poor thermal stability at high temperatures severely restrict the practical use of LATP in solid-state batteries (SSB). Herein, a systematic review of recent advances in LATP for SSBs is provided. Here, this review starts with a brief introduction to the development history of LATP and then summarizes its structure, ion transport mechanism, and synthesis methods. Challenges (e.g., intrinsic brittleness, interfacial resistance, and compatibility) and corresponding solutions (ionic substitution, additives, protective layers, composite electrolytes, etc.) that are critical for practical applications are then discussed. Last, an outlook on the future research direction of LATP-based SSB is provided.

25 ENERGY STORAGE↗