Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic analyzer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

AP-Cloud: Adaptive Particle-in-Cloud method for optimal solutions to Vlasov–Poisson equation

We propose a new adaptive Particle-in-Cloud (AP-Cloud) method for obtaining optimal numerical solutions to the Vlasov–Poisson equation. Unlike the traditional particle-in-cell (PIC) method, which is commonly used for solving this problem, the AP-Cloud adaptively selects computational nodes or particles to deliver higher accuracy and efficiency when the particle distribution is highly non-uniform. Unlike other adaptive techniques for PIC, our method balances the errors in PDE discretization and Monte Carlo integration, and discretizes the differential operators using a generalized finite difference (GFD) method based on a weighted least square formulation. As a result, AP-Cloud is independent of the geometric shapes of computational domains and is free of artificial parameters. Efficient and robust implementation is achieved through an octree data structure with 2:1 balance. We analyze the accuracy and convergence order of AP-Cloud theoretically, and verify the method using an electrostatic problem of a particle beam with halo. Simulation results show that the AP-Cloud method is substantially more accurate and faster than the traditional PIC, and it is free of artificial forces that are typical for some adaptive PIC techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Landau damping in space plasmas

The Landau damping of electrostatic Langmuir waves and ion-acoustic waves in a hot, isotropic, nonmagnetized, generalized Lorentzian plasma is analyzed using the modified plasma dispersion function. Numerical solutions for the real and imaginary parts of the wave frequency omega sub 0 - (i)(gamma) have been obtained as a function of the normalized wave number (k)(lambda sub D), where lambda sub D is the electron Debye length. For both particle distributions the electrostatic modes are found to be strongly damped at short wavelengths. At long wavelengths, this damping becomes less severe, but the attenuation of Langmuir waves is much stronger for a generalized Lorentzian plasma than for a Maxwellian plasma. It is concluded that Landau damping of ion-acoustic waves is only slightly affected by the presence of a high energy tail, but is strongly dependent on the ion temperature.

Thorne, Richard M.↗

Adsorption on Fe-MOF-74 for C1–C3 Hydrocarbon Separation

An increase in demand for energy efficient processes for the separation of a mixture of hydrocarbons drives the need for understanding metal–organic frameworks (MOFs) that can provide better noncryogenic alternatives for the fractionation of hydrocarbon mixtures. Here we study the structure and properties of a metal–organic framework, Fe-MOF-74, and its effectiveness to separate C1–C3 hydrocarbon mixtures. The binding of these hydrocarbons to the open metal sites of Fe-MOF-74 has been investigated using a meta-generalized gradient approximation density functional, M06-L, which has previously been validated for systems containing transition metals. For interpretive purposes, charge model 5 (CM5) is used to determine the partial atomic charges on the metal cations and the oxygen atoms of the ligands surrounding these metal centers. Our computations show preferential binding to the metal center of Fe-MOF-74 of unsaturated hydrocarbons over saturated ones in agreement with experimental results, and the calculated binding energies are in semiquantitative agreement with experiment. The results are analyzed in terms of various factors contributing to the binding, including structural distortion, electrostatics, damped dispersion, charge transfer, back bonding, and ligand field effects on the d orbitals. The CM5 charges are not sensitive to small differences in structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Applications of IBA Techniques to Biological Samples Analysis: PIXE and RBS

The analytical techniques based on ion beams or IBA techniques give quantitative information on elemental concentration in samples of a wide variety of nature. In this work, we focus on PIXE technique, analyzing thick target biological specimens (TTPIXE), using 3 MeV protons produced by an electrostatic accelerator. A nuclear microprobe was used performing PIXE and RBS simultaneously, in order to solve the uncertainties produced in the absolute PIXE quantifying. The advantages of using both techniques and a nuclear microprobe are discussed. Quantitative results are shown to illustrate the multielemental resolution of the PIXE technique; for this, a blood standard was used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photosystem II oxygen-evolving complex photoassembly displays an inverse H/D solvent isotope effect under chloride-limiting conditions

Photosystem II (PSII) performs the solar-driven oxidation of water used to fuel oxygenic photosynthesis. The active site of water oxidation is the oxygen-evolving complex (OEC), a Mn 4 CaO 5 cluster. PSII requires degradation of key subunits and reassembly of the OEC as frequently as every 20 to 40 min. The metals for the OEC are assembled within the PSII protein environment via a series of binding events and photochemically induced oxidation events, but the full mechanism is unknown. A role of proton release in this mechanism is suggested here by the observation that the yield of in vitro OEC photoassembly is higher in deuterated water, D 2 O, compared with H 2 O when chloride is limiting. In kinetic studies, OEC photoassembly shows a significant lag phase in H 2 O at limiting chloride concentrations with an apparent H/D solvent isotope effect of 0.14 ± 0.05. The growth phase of OEC photoassembly shows an H/D solvent isotope effect of 1.5 ± 0.2. We analyzed the protonation states of the OEC protein environment using classical Multiconformer Continuum Electrostatics. Combining experiments and simulations leads to a model in which protons are lost from amino acid that will serve as OEC ligands as metals are bound. Chloride and D 2 O increase the proton affinities of key amino acid residues. These residues tune the binding affinity of Mn 2+/3+ and facilitate the deprotonation of water to form a proposed μ-hydroxo bridged Mn 2+ Mn 3+ intermediate.

54 ENVIRONMENTAL SCIENCES↗

Ferritin Structure from Mycobacterium tuberculosis : Comparative Study with Homologues Identifies Extended C-Terminus Involved in Ferroxidase Activity

Ferritins are recognized as key players in the iron storage and detoxification processes. Iron acquisition in the case of pathogenic bacteria has long been established as an important virulence mechanism. Here, we report a 3.0 Å crystal structure of a ferritin, annotated as Bacterioferritin B (BfrB), from Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis that continues to be one of the world’s deadliest diseases. Similar to the other members of ferritin family, the Mtb BfrB subunit exhibits the characteristic fold of a four-helical bundle that possesses the ferroxidase catalytic centre. We compare the structure of Mtb BfrB with representatives of the ferritin family belonging to the archaea, eubacteria and eukarya. Unlike most other ferritins, Mtb BfrB has an extended C-terminus. To dissect the role of this extended C-terminus, truncated Mtb BfrB was purified and biochemical studies implicate this region in ferroxidase activity and iron release in addition to providing stability to the protein. Functionally important regions in a protein of known 3D-structure can be determined by estimating the degree of conservation of the amino-acid sites with its close homologues. Based on the comparative studies, we identify the slowly evolving conserved sites as well as the rapidly evolving variable sites and analyze their role in relation to structure and function of Mtb BfrB. Further, electrostatic computations demonstrate that although the electrostatic environment of catalytic residues is preserved within the family, extensive variability is exhibited by residues defining the channels and pores, in all likelihood keeping up with the diverse functions executed by these ferritins in varied environments.

59 BASIC BIOLOGICAL SCIENCES↗

Theory of the pulse response from a small antenna in a magnetized plasma

The electrostatic plasma response to a small pulsed antenna in a magnetic field is analyzed. The ringing of the plasma at three discrete frequencies--the upper-hybrid frequency and two resonance cone branch frequencies--is evidenced, and the amplitudes of these frequency responses is determined as a function of the characteristic plasma frequencies, the angle of observation with respect to the magnetic field, and the pulse length. Applications to plasma diagnostics are discussed. It is shown that the upper hybrid response and the response at either of the resonance cone branch frequencies is adequate information to determine the plasma density, and the magnetic field magnitude and angle.

Grabbe, Crockett L.↗

Diagnostics of the ITER neutral beam test facility

The ITER heating neutral beam (HNB) injector, based on negative ions accelerated at 1 MV, will be tested and optimized in the SPIDER source and MITICA full injector prototypes, using a set of diagnostics not available on the ITER HNB. The RF source, where the H{sup -}/D{sup -} production is enhanced by cesium evaporation, will be monitored with thermocouples, electrostatic probes, optical emission spectroscopy, cavity ring down, and laser absorption spectroscopy. The beam is analyzed by cooling water calorimetry, a short pulse instrumented calorimeter, beam emission spectroscopy, visible tomography, and neutron imaging. Design of the diagnostic systems is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrostatic Regolith Interaction Experiment (ERIE) Electrometer Instrument Development

The Electrostatic Regolith Interaction Experiment (ERIE) is a joint venture between the University of Central Florida (UCF) Center for Microgravity Research (CMR) and the NASA Kennedy Space Center (KSC) Electrostatics and Surface Physics Laboratory (ESPL) seeking to examine charged dust grain behavior in a microgravity environment. Two separate systems have been combined for this suborbital flight experiment: the COLLisions Into Dust Experiment (COLLIDE) developed by the UCF CMR and the Wheel Electrostatic Spectrometer (WES) developed by the NASA KSC ESPL. This combination will advance the understanding of the natural and induced charged grain behavior on the Moon, asteroids, and other low gravity bodies comprised of charged dust particles. COLLIDE retains granular material under vacuum in a shallow tray behind a metal door, which then opens and releases the particles into a larger open volume when microgravity is achieved. The experiment is observed with a high-speed camera, such that the motions of these particles can then be tracked so the kinematics of each grain may be analyzed. The original application for this apparatus was to study cratering events into granular beds, but electrostatic repulsion was detected in the early frames of the video data returned from completed experiments, so a re-flight with a focus on these events was proposed. Agitation of the grains during launch combined with the frictional charge transfer between the grains and the door as it slides open provides an opportunity to use this setup to observe material tribocharging and charged particle behaviors in microgravity. In this updated version, the charged particles released into the chamber will traverse through an electric field produced by high voltage parallel plates and their resulting trajectories will be determined by their net charges. WES was originally developed to characterize the triboelectric properties of the Martian regolith through the contact of a rover wheel with the surface as it rotates. Improvements were made upon this legacy system to develop a sensor suite that will be installed within the COLLIDE door to measure charge transferred between the granular material and insulating disks protruding through the door. These insulator disks span the triboelectric series so, as they slide across the particulate matter when the door opens, each will accumulate a charge consistent with its relative position to the grains within the series. This charge on each insulator is distributed between two capacitances in series with an electrometer amplifier returning an analog voltage proportional to the charge accumulated. Calibration of this system has been performed using applications of known charge to the inputs and characterization of the frictional charge transfer between various regolith simulants and the sensor insulators is currently being examined in the lab.

Electrostatics↗

MMS Observations of Electrostatic Waves in an Oblique Shock Crossing

High-resolution particle and wave measurements taken during an oblique bow shock crossing by the Magnetospheric Multiscale (MMS) mission are analyzed. Two regions of differing magnetic behavior are identified within the shock, one with active magnetic fluctuations and one with laminar interplanetary magnetic field topology. A prominent reflected ion population is observed in both regions. The active magnetic region is characterized by large-amplitude (>100 mV/m) electrostatic solitary waves, electron Bernstein waves, and ion acoustic waves, along with intermittent current activity and localized electron heating. In the region of laminar magnetic field, ion acoustic waves are prominently observed. Solar wind ion deceleration is observed in both regions of active and laminar magnetic field. All observations suggest that solar wind deceleration can occur as a result of multiple independent processes, in this case current and ion-ion instabilities.

Goodrich, Katherine A.↗

On the response of large systems to electrostatic fields

By modifying the surfaces of a macroscopic regular system it is possible to modify the dipole moment per unit by an amount equal to a lattice vector times the elementary charge. Alternatively, we may ignore the surfaces and treat the system as being infinite and periodic. In that event the dipole moment per unit is determined only up to an additive term equal to a lattice vector times the elementary charge. Beyond mathematical arguments we show, through model calculations, that the two cases are completely equivalent, even though the origin of the additive term is very different. The response of extended systems to electrostatic fields — including internal structure, piezoelectricity, bulk charge density, and (hyper)polarizabilities — depends upon this term and is, thereby, surface-dependent. The case of piezoelectricity is analyzed in some detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of band offset on carrier transport and infrared detection in InP quantum dots/Si nano-heterojunction grown by metalorganic chemical vapor deposition technique

Epitaxy of III-V semiconductors on Si gets recent interest for next generation system on heterogeneous chip on wafer. The understanding of band offset is thus necessary for describing the charge transport phenomenon in these heterojunctions. In this work, x-ray photoemission spectroscopy has been used to determine the band offsets in a heterojunction made of InP quantum dots on Si. The valence and conduction band offset was found to be 0.12 eV and 0.35 eV, respectively, with a type-II band lineup. Deviation from theoretical prediction and previously published reports on quasi similar systems have been found and analyzed on the basis of the effect of strain, surface energy, shift in the electrostatic dipole and charge transfer at the interface. The carrier transport mechanisms along with different device parameters in the heterojunction have been studied for a temperature range of 180–300 K. This heterojunction is found to behave as an efficient infrared photodetector with an ON/OFF ratio of 21 at a reverse bias of 2 V. The corresponding rise and decay time was found to be 132 ms and 147 ms, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-dependent luminescence and piezoelectricity in monolayer transition metal dichalcogenides

The modification of optical and electronic properties of transition metal dichalcogenides via mechanical deformation has been widely studied. Their ability to withstand large deformations before rupture has enabled large tunability of the bandgap, and further, the spatially varying strain has been shown to control the spatial distribution of the bandgap and lead to effects such as carrier funneling. Monolayer transition metal dichalcogenides exhibit a significant piezoelectric effect that could couple to a spatially inhomogeneous strain distribution to influence electronic and optical behavior. We investigate both experimentally and theoretically an example case of photoluminescence in structures with a strain distribution similar to that employed in single-photon emitters but generated here via nanoindentation. Using a mechanical model for strain induced by nanoindentation, we show that piezoelectricity can result in charge densities reaching 10 12 e/cm 2 and can generate electrostatic potential variations on the order of ±0.1 V across the suspended monolayer. We analyze the implications of these results for luminescence and exciton transport in monolayer transition metal dichalcogenides with spatially varying strain.

42 ENGINEERING↗

Electrostatic analysis of charge-coupled structures

Package of three computer programs performs two-dimensional electrostatic analysis to determine efficiency of charge transfer. One program can be used to analyze three-electrode charge-coupled device input/output gates, and other two programs can be used to analyze two-phase structures containing two or four electrodes with periodic boundary conditions.

Gassaway, J. D.↗

Micromachined patch-clamp apparatus

A micromachined patch-clamp apparatus is disclosed for holding one or more cells and providing electrical, chemical, or mechanical stimulation to the cells during analysis with the patch-clamp technique for studying ion channels in cell membranes. The apparatus formed on a silicon substrate utilizes a lower chamber formed from silicon nitride using surface micromachining and an upper chamber formed from a molded polymer material. An opening in a common wall between the chambers is used to trap and hold a cell for analysis using the patch-clamp technique with sensing electrodes on each side of the cell. Some embodiments of the present invention utilize one or more electrostatic actuators formed on the substrate to provide mechanical stimulation to the cell being analyzed, or to provide information about mechanical movement of the cell in response to electrical or chemical stimulation.

47 OTHER INSTRUMENTATION↗

Magnetoresistance and quantum oscillations of an electrostatically tuned semimetal-to-metal transition in ultrathin WTe 2

In this work, we report on electronic transport measurements of electrostatically gated nanodevices of the semimetal WTe 2 . High mobility metallic behavior is achieved in the 2D limit by encapsulating thin flakes in an inert atmosphere. At low temperatures, we find that a large magnetoresistance can be turned on and off by electrostatically doping the system between a semimetallic state and an electron-only metallic state, respectively. We confirm the nature of the two regimes by analyzing the magnetoresistance and Hall effect with a two-carrier model, as well as by analysis of Shubnikov-de Haas oscillations, both of which indicate depletion of hole carriers via the electrostatic gate. This confirms that semiclassical transport of two oppositely charged carriers accurately describes the exceptional magnetoresistance observed in this material. Finally, we also find that the magnetoresistance power law is subquadratic and density independent, suggesting new physics specifically in the semimetallic regime.

36 MATERIALS SCIENCE↗

Ab initio study of the electrostatic multipole nature of torsional potentials in CH3SSCH3, CH3SSH, and HOOH

The origin of torsional potentials in H3CSSCH3, H3CSSH, and HOOH and the anisotropy of the local charge distribution has been analyzed in terms of atomic multipoles calculated from the ab initio LCAO-MO-SCF wave function in the 6-31G* basis set. The results indicate that for longer -S-S-bonds the major contribution to these torsional barriers are electrostatic interactions of the atomic multipoles located on two atoms forming the rotated bond. This finding demonstrates the important role of electrostatic 1-2 interatomic interactions, usually neglected in conformational studies. It also opens the possibility to derive directly from accurate ab initio wave functions a simple nonempirical torsional potential involving atomic multipoles of two bonded atoms defining the torsional angle. For shorter -O-O- bonds, use of more precise models and inclusion of 1-3 interactions seems to be necessary.

NASA Program Exobiology↗

Electron Charged Graphite-Based Hydrogen Storage Material (Final Report)

The electron-charge effects have been demonstrated to enhance hydrogen storage capacity using materials which have inherent hydrogen storage capacities. A charge control agent (CCA) or a charge transfer agent (CTA) was applied to the hydrogen storage material to reduce internal discharge between particles in a Sievert volumetric test device. GTI has tested the device under (1) electrostatic charge mode; (2) ultra-capacitor mode; and (3) metal-hydride mode. GTI has also analyzed the charge distribution on storage materials. The charge control agent and charge transfer agent are needed to prevent internal charge leaks so that the hydrogen atoms can stay on the storage material. GTI has analyzed the hydrogen fueling tank structure, which contains an air or liquid heat exchange framework. The cooling structure is needed for hydrogen fueling/releasing. We found that the cooling structure could be used as electron-charged electrodes, which will exhibit a very uniform charge distribution (because the cooling system needs to remove heat uniformly). Therefore, the electron-charge concept does not have any burden of cost and weight for the hydrogen storage tank system. The energy consumption for the electron-charge enhancement method is quite low or omitted for electrostatic mode and ultra-capacitor mode in comparison of other hydrogen storage methods; however, it could be high for the battery mode.

08 HYDROGEN↗