Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic atomizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Polarizable Water Potential Derived from a Model Electron Density

A new empirical potential for efficient, large scale molecular dynamics simulation of water is presented. The HIPPO (Hydrogen-like Intermolecular Polarizable POtential) force field is based upon the model electron density of a hydrogen-like atom. This framework is used to derive and parametrize individual terms describing charge penetration damped permanent electrostatics, damped polarization, charge transfer, anisotropic Pauli repulsion, and damped dispersion interactions. Initial parameter values were fit to Symmetry Adapted Perturbation Theory (SAPT) energy components for ten water dimer configurations, as well as the radial and angular dependence of the canonical dimer. The SAPT-based parameters were then systematically refined to extend the treatment to water bulk phases. The final HIPPO water model provides a balanced representation of a wide variety of properties of gas phase clusters, liquid water, and ice polymorphs, across a range of temperatures and pressures. This water potential yields a rationalization of water structure, dynamics, and thermodynamics explicitly correlated with an ab initio energy decomposition, while providing a level of accuracy comparable or superior to previous polarizable atomic multipole force fields. The HIPPO water model serves as a cornerstone around which similarly detailed physics-based models can be developed for additional molecular species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of the Electrostatic Force in Spore Adhesion

Electrostatic force is investigated as one of the components of the adhesion force between Bacillus thuringiensis (Bt) spores and planar surfaces. The surface potentials of a Bt spore and a mica surface are experimentally obtained using a combined atomic force microscopy (AFM)-scanning surface potential microscopy technique. On the basis of experimental information, the surface charge density of the spores is estimated at 0.03 {micro}C/cm{sup 2} at 20% relative humidity and decreases with increasing humidity. The Coulombic force is introduced for the spore-mica system (both charged, nonconductive surfaces), and an electrostatic image force is introduced to the spore-gold system because gold is electrically conductive. The Coulombic force for spore-mica is repulsive because the components are similarly charged, while the image force for the spore-gold system is attractive. The magnitude of both forces decreases with increasing humidity. The electrostatic forces are added to other force components, e.g., van der Waals and capillary forces, to obtain the adhesion force for each system. The adhesion forces measured by AFM are compared to the estimated values. It is shown that the electrostatic (Coulombic and image) forces play a significant role in the adhesion force between spores and planar surfaces.

59 BASIC BIOLOGICAL SCIENCES↗

Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers

Highlights: > This paper presents new and important data on characterization of wastes of electric and electronic equipments. > Copper concentration is increasing in mobile phones and remaining constant in personal computers. > Printed circuit boards from mobile phones and computers would not be mixed prior treatment. - Abstract: This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Neutron crystallography for the study of hydrogen bonds in macromolecules

The hydrogen bond (H bond) is one of the most important interactions that form the foundation of secondary and tertiary protein structure. Beyond holding protein structures together, H bonds are also intimately involved in solvent coordination, ligand binding, and enzyme catalysis. The H bond by definition involves the light atom, H, and it is very difficult to study directly, especially with X-ray crystallographic techniques, due to the poor scattering power of H atoms. Neutron protein crystallography provides a powerful, complementary tool that can give unambiguous information to structural biologists on solvent organization and coordination, the electrostatics of ligand binding, the protonation states of amino acid side chains and catalytic water species. The method is complementary to X-ray crystallography and the dynamic data obtainable with NMR spectroscopy. Also, as it gives explicit H atom positions, it can be very valuable to computational chemistry where exact knowledge of protonation and solvent orientation can make a large difference in modeling. Finally, this article gives general information about neutron crystallography and shows specific examples of how the method has contributed to structural biology, structure-based drug design; and the understanding of fundamental questions of reaction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and spectroscopic characterization of actinyl(VI) tetrahalide coordination compounds containing 2, 2'-bipyridine

A series of three new actinide tetrahalide coordination compounds containing 2,2'-bipyridinium (H 2 bpy) have been synthesized by room temperature evaporation and characterized via single crystal X-ray diffraction, Raman spectroscopy, and infrared spectroscopy. The solid-state compounds (Np1, U1, and U2) contain the AnO 2 2+ cation coordinated to four halide (chloride or bromide) atoms to form the anionic tetrahalide molecular unit [AnO 2 X 4 ] 2– (X = Cl, Br) and are charge balanced by the 2,2'-bipyridinium cations that engage in electrostatic interactions with the actinyl complex. Np1 (N 2 C 10 H 10 )[NpO 2 Cl 4 ] contains 2,2'-bipyridine in the cis conformation where both the nitrogen atoms are directed towards the [NpO 2 Cl 4 ] 2– monomer. Within U1 (N 2 C 10 H 9 )[UO 2 Cl 4 ], the 2,2'-bipyridine is in a trans conformation, and found in the same orientation in the isomorphous structure U2 (N 2 C 10 H 9 )[UO 2 Br 4 ]. The compounds were further characterized by vibrational spectroscopy with specific interest in the actinyl cation. Raman spectroscopy provided information on the actinyl symmetric stretch (ν 1 ) whereas IR spectroscopy is used to determine the location of the asymmetric stretch (ν 3 ). Here, spectral similarities are observed between the two isomorphous structures, but slight variations across the series of structures are found to be associated with bipyridine bands in the various conformations. Additional analysis of these vibrational features in U1 and U2 provided information on the actinyl force constants, allowing insight into the relative uranyl bond strength that was compared to similar tetrahalide compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pauling’s rules for oxide-based minerals: A re-examination based on quantum mechanical constraints and modern applications of bond-valence theory to Earth materials

Since their introduction in 1929, Pauling’s five rules have been used by scientists from many disciplines to rationalize and predict stable arrangements of atoms and coordination polyhedra in crystalline solids; amorphous materials such as silicate glasses and melts; nanomaterials, poorly crystalline solids; aqueous cation and anion complexes; and sorption complexes at mineral-aqueous solution interfaces. The predictive power of these simple yet powerful rules was challenged recently by George et al. (2020), who performed a statistical analysis of the performance of Pauling’s five rules for about 5000 oxide crystal structures. They concluded that only 13% of the oxides satisfy the last four rules simultaneously and that the second rule has the most exceptions. They also found that Pauling’s first rule is satisfied for only 66% of the coordination environments tested and concluded that no simple rule linking ionic radius to coordination environment will be predictive due to the variable quality of univalent radii. We address these concerns and discuss quantum mechanical calculations that complement Pauling’s rules, particularly his first (radius sum and radius ratio rule) and second (electrostatic valence rule) rules. We also present a more realistic view of the bonded radii of atoms, derived by determining the local minimum in the electron density distribution measured along trajectories between bonded atoms known as bond paths, i.e., the bond critical point (rc). Electron density at the bond critical point is a quantum mechanical observable that correlates well with Pauling bond strength. Moreover, a metal atom in a polyhedron has as many bonded radii as it has bonded interactions, resulting in metal and O atoms that may not be spherical. O atoms, for example, are not spherical in many oxide-based crystal structures. Instead, the electron density of a bonded oxygen is often highly distorted or polarized, with its bonded radius decreasing systematically from ~1.38 Å when bonded to highly electropositive atoms like sodium to 0.64 Å when bonded to highly electronegative atoms like nitrogen. Bonded radii determined for metal atoms match the Shannon (1976) radii for more electropositive atoms, but the match decreases systematically as the electronegativities of the M atoms increase. As a result, significant departures from the radius ratio rule in the analysis by George et al. (2020) is not surprising. We offer a modified, more fundamental version of Pauling’s first rule and demonstrate that the second rule has a one-to-one connection between the electron density accumulated between the bonded atoms at the bond critical point and the Pauling bond strength of the bonded interaction. Pauling’s second rule implicitly assumes that bond strength is invariant with bond length for a given pair of bonded atoms. Many studies have since shown that this is not the case, and Brown and Shannon (1973) developed an equation and a set of parameters to describe the relation between bond length and bond strength, now redefined as bond valence to avoid confusion with Pauling bond-strength. Brown (1980) used the valence-sum rule, together with the path rule and the valence-matching principle, as the three axioms of bond-valence theory (BVT), a powerful method for understanding many otherwise elusive aspects of crystals and also their participation in dynamic processes. We show how a priori bond-valence calculations can predict unstrained bond-lengths and how bond-valence mapping can locate low-Z atoms in a crystal structure (e.g., Li) or examine possible diffusion pathways for atoms through crystal structures. In addition, we briefly discuss Pauling’s third, fourth, and fifth rules, the first two of which concern the sharing of polyhedron elements (edges and faces) and the common instability associated with structures in which a polyhedron shares an edge or face with another polyhedron and contains high-valence cations. The olivine [α-(MgxFe1–x)2SiO4] crystal structure is used to illustrate the distortions from hexagonal close-packing of O atoms caused by metal-metal repulsion across shared polyhedron edges. We conclude by discussing several applications of BVT to Earth materials, including the use of BVT to: (1) locate H+ ions in crystal structures, including the location of protons in the crystal structures of nominally anhydrous minerals in Earth’s mantle; (2) determine how strongly bonded (usually anionic) structural units interact with weakly bonded (usually cationic) interstitial complexes in complex uranyl-oxide and uranyl-oxysalt minerals using the valence-matching principle; (3) calculate Lewis acid strengths of cations and Lewis base strengths of anions; (4) determine how (H2O) groups can function as bond-valence transformers by dividing one bond into two bonds of half the bond valence; (5) help characterize products of sorption reactions of aqueous cations (e.g., Co2+ and Pb2+) and oxyanions [e.g., selenate (Se6+O4)2- and selenite (Se4+O3)2-] at mineral-aqueous solution interfaces and the important role of protons in these reactions; and (6) help characterize the local coordination environments of highly charged cations (e.g., Zr4+, Ti4+, U4+, U5+, and U6+) in silicate glasses and melts.

Geochemistry & Geophysics↗

An improved fragment-based quantum mechanical method for calculation of electrostatic solvation energy of proteins

An efficient approach that combines the electrostatically embedded generalized molecular fractionation with conjugate caps (EE-GMFCC) method with conductor-like polarizable continuum model (CPCM), termed EE-GMFCC-CPCM, is developed for ab initio calculation of the electrostatic solvation energy of proteins. Compared with the previous MFCC-CPCM study [Y. Mei, C. G. Ji, and J. Z. H. Zhang, J. Chem. Phys. 125, 094906 (2006)], quantum mechanical (QM) calculation is applied to deal with short-range non-neighboring interactions replacing the classical treatment. Numerical studies are carried out for proteins up to 3837 atoms at the HF/6-31G* level. As compared to standard full system CPCM calculations, EE-GMFCC-CPCM shows clear improvement over the MFCC-CPCM method for both the total electrostatic solvation energy and its components (the polarized solute-solvent reaction field energy and wavefunction distortion energy of the solute). For large proteins with 1000–4000 atoms, where the standard full system ab initio CPCM calculations are not affordable, the EE-GMFCC-CPCM gives larger relative wavefunction distortion energies and weaker relative electrostatic solvation energies for proteins, as compared to the corresponding energies calculated by the Divide-and-Conquer Poisson-Boltzmann (D and C-PB) method. Notwithstanding, a high correlation between EE-GMFCC-CPCM and D and C-PB is observed. This study demonstrates that the linear-scaling EE-GMFCC-CPCM approach is an accurate and also efficient method for the calculation of electrostatic solvation energy of proteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of vacuum ultraviolet excimer laser radiation with fused silica. III. Negative ion formation

We report mass- and time-resolved measurements of negative ions produced by exposing fused silica to 157 nm radiation at fluences below the threshold for optical breakdown. The principal observed negative ions are O{sup -}, Si{sup -}, and SiO{sup -}, in order of decreasing intensity. The peak in the negative ion time-of-flight signals occurs after the peak in the positive ion signal and before the peak in the corresponding neutral atom or molecule signal. The negative ion intensities are strong functions of the degree of overlap between the positive ion and neutral atom densities. We propose that O{sup -}, Si{sup -}, and SiO{sup -} are created after the laser pulse, by electron attachment to these neutral particles and that the electrons participating in attachment events are trapped in the electrostatic potential of the positive ions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exemption of lattice collapse in Ni–MnO 2 birnessite regulated by the structural water mobility

Lattice collapse and associated mechanical fracture frequently occur in Li-intercalated metal oxide cathodes at the deep charge state upon Li-ion removal, governed by chemical compositions and the resulting electron density of the oxygen atoms. However, similar lattice collapse for metal oxide electrodes in aqueous storage and its mitigation have not been well studied. In this work, we reported the lattice collapse of MnO 2 layered birnessite during the aqueous de-sodiation process at high voltage due to the structural water motion, as evidenced by in situ XRD. Unlike non-aqueous Li-intercalated electrodes, Ni-dopants mitigated the lattice collapse of birnessite at deep charge states. Moreover, density functional theory (DFT) calculations showed that Ni doping induces charge depletion of lattice oxygen due to its higher electronegativity than Mn. This charge reduction, in turn, yields a significant decrease in electrostatic repulsion between the oxygens belonging to lattice and structural water. Classical molecular dynamics simulations based on atomic charges obtained from DFT elucidate that Ni-doping facilitates immobilization of structural water in (Ni)MnO 2 and prevents lattice collapse upon Na-ion removal. (Ni)MnO 2 exempted from lattice collapse shows an improved storage capacity relative to MnO 2 while maintaining similar cycling stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding atom probe’s analytical performance for iron oxides using correlation histograms and ab initio calculations

Abstract Field evaporation from ionic or covalently bonded materials often leads to the emission of molecular ions. The metastability of these molecular ions, particularly under the influence of the intense electrostatic field (10 10 Vm −1 ), makes them prone to dissociation with or without an exchange of energy amongst them. These processes can affect the analytical performance of atom probe tomography (APT). For instance, neutral molecules formed through dissociation may not be detected at all or with a time of flight no longer related to their mass, causing their loss from the analysis. Here, we evaluated the changes in the measured composition of FeO, Fe 2 O 3 and Fe 3 O 4 across a wide range of analysis conditions. Possible dissociation reactions are predicted by density-functional theory calculations considering the spin states of the molecules. The energetically favoured reactions are traced on to the multi-hit ion correlation histograms, to confirm their existence within experiments, using an automated Python-based routine. The detected reactions are carefully analyzed to reflect upon the influence of these neutrals from dissociation reactions on the performance of APT for analysing iron oxides.

74 ATOMIC AND MOLECULAR PHYSICS↗

Hybrid MD-Nernst Planck Model of Alpha-hemolysin Conductance Properties

Motivated by experiments in which an applied electric field translocates polynucleotides through an alpha-hemolysin protein channel causing ionic current transient blockade, a hybrid simulation model is proposed to predict the conductance properties of the open channel. Time scales corresponding to ion permeation processes are reached using the Poisson-Nemst-Planck (PNP) electro-diffusion model in which both solvent and local ion concentrations are represented as a continuum. The diffusion coefficients of the ions (K(+) and Cl(-)) input in the PNP model are, however, calculated from all-atom molecular dynamics (MD). In the MD simulations, a reduced representation of the channel is used. The channel is solvated in a 1 M KCI solution, and an external electric field is applied. The pore specific diffusion coefficients for both ionic species are reduced 5-7 times in comparison to bulk values. Significant statistical variations (17-45%) of the pore-ions diffusivities are observed. Within the statistics, the ionic diffusivities remain invariable for a range of external applied voltages between 30 and 240mV. In the 2D-PNP calculations, the pore stem is approximated by a smooth cylinder of radius approx. 9A with two constriction blocks where the radius is reduced to approx. 6A. The electrostatic potential includes the contribution from the atomistic charges. The MD-PNP model shows that the atomic charges are responsible for the rectifying behaviour and for the slight anion selectivity of the a-hemolysin pore. Independent of the hierarchy between the anion and cation diffusivities, the anionic contribution to the total ionic current will dominate. The predictions of the MD-PNP model are in good agreement with experimental data and give confidence in the present approach of bridging time scales by combining a microscopic and macroscopic model.

Cozmuta, Ioana↗

Neutron diffraction study of the beta' and gamma phases of LiFeO{sub 2}

The beta, beta', gamma and alpha phases of LiFeO{sub 2}, synthesized as powders, were annealed at different temperatures and characterized by X-ray measurements. The beta' and gamma modifications were also studied by time-of-flight neutron diffraction (ISIS Facility, UK). The structure of the beta' phase was refined in the monoclinic C2/c space group (a=8.566(1), b=11.574(2), c=5.1970(5) A, beta=146.064(5){sup o}) to wR{sub p}=0.071-0.080 (data from four counter banks). Fe and Li atoms are ordered over two of the four independent sites, and partially disordered over the other two. The ordered Li has a distorted tetrahedral coordination. The gamma structure was refined at RT (a=4.047(1), c=8.746(2) A) and at 570 deg. C (a=4.082(3), c=8.822(6) A) in the I4{sub 1}/amd symmetry, showing full order with Li in octahedral coordination at RT, and in a split-atom configuration at high temperature. On annealing, the beta' polymorph was found to transform to gamma at 550 deg. C, thus suggesting that it is a metastable phase. Electrostatics is discussed as the driving force for the alpha->beta'->gamma ordering process of LiFeO{sub 2}. - Graphical abstract: Crystal structure of beta'-LiFeO{sub 2} (monoclinic C2/c). Lithium and iron atoms are both ordered (blue and yellow balls) and partially disordered (green balls) over four independent sites. The beta' phase transforms to fully ordered gamma (tetragonal I4{sub 1}/amd) at 550 deg. C.

36 MATERIALS SCIENCE↗

Mars Environmental Compatibility Assessment (MECA): Identifying the Hazards of the Martian Soil

Sometime in the next decade NASA will decide whether to send a human expedition to explore the planet Mars. The Mars Environmental Compatibility Assessment (MECA) has been selected by NASA to evaluate the Martian environment for soil and dust hazards to human exploration. The integrated MECA payload contains three elements: a wet-chemistry laboratory, a microscopy station, and enhancements to a lander robot-arm system incorporating arrays of material patches and an electrometer to identify triboelectric charging during soil excavation. The wet-chemistry laboratory will evaluate samples of Martian soil in water to determine the total dissolved solids, redox potential, pH, and quantify the concentration of many soluble ions using ion-selective electrodes. These electrodes can detect potentially dangerous heavy-metal ions, emitted pathogenic gases, and the soil's corrosive potential. MECA's microscopy station combines optical and atomic-force microscopy with a robot-arm camera to provide imaging over nine orders of magnitude, from meters to nanometers. Soil particle properties including size, shape, color, hardness, adhesive potential (electrostatic and magnetic), will be determined on the microscope stage using an ar-ray of sample receptacles and collection substrates, and an abrasion tool,. The simple, rugged atomic-force microscope will image in the submicron size range and has the capability of performing a particle-by-particle analysis of the dust and soil. Although selected by NASA's Human Exploration and Development of Space Enterprise, the MECA instrument suite also has the capability to address basic geology, paleoclimate, and exobiology issues. To understand both contemporaneous and ancient processes on Mars, the mineralogical, petrological, and reactivity of Martian surface materials should be constrained: the NMCA experiment will shed light on these quantities through its combination of chemistry and microscopy. On Earth, the earliest forms of life are preserved as microfossils. The atomic-force microscope will have the required resolution to image down to the scale of terrestrial microfossils and beyond.

Meloy, T. P.↗

Atomically-resolved mapping of polarization and electric fields across ferroelectric-oxide interfaces by Z-contrast imaging

Direct atomic displacement mapping at ferroelectric interfaces by aberration corrected scanning transmission electron microscopy(STEM) (a-STEM image, b-corresponding displacement profile) is combined with Landau-Ginsburg-Devonshire theory to obtain the complete interface electrostatics in real space, including separate estimates for the polarization and intrinsic interface charge contributions.

36 MATERIALS SCIENCE↗

Thermodynamic Trends for Reduction of CO by Molecular Complexes

Selective reduction of CO 2 into fuels and chemical feedstocks is highly desirable to reduce our dependence on fossil fuels. Most molecular catalysts afford 2e – reduction products, such as CO or HCO 2 – , as opposed to more reduced products. Here we present an analysis of the thermodynamic limitations for reduction of the CO ligand in the form of a series of isostructural group 6 carbonyl complexes, Cp*M(CO) 3 (P(OMe) 3 ) + (M = Cr, Mo, and W). Additionally, the free energy for stepwise transfer of a hydride (H – ) and a proton (H + ) to the CO ligand, resulting in a hydroxycarbene (CHOH) complex, was measured by equilibration with H – /H + donors and acceptors with known hydricity or acidity. Together, these two reaction steps are equivalent to a net addition of H 2 across the CO ligand. A large and unfavorable free energy for H 2 addition (Δ G ° H2 ) was measured for all three complexes and decreases in the order Cr > Mo > W. The trend for these complexes is opposite to the trend previously reported for group 7 carbonyl complexes, for which Δ G ° H2 decreases moving up the group, Re > Mn. Computational analysis indicates the trends can be described in terms of electrostatic effects, where a low Δ G ° H2 is obtained in complexes that balance the atomic charges of the M–C≡O fragment of the complex. These findings can be used to design metal carbonyl complexes with a more energetically accessible H 2 addition, which will facilitate the development of molecular catalysts for reduction of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of the THz spectrum of liquid water incorporating the effects of intermolecular charge fluxes through hydrogen bonds

The intensity of the band at ∼200 cm{sup −1} (∼6 THz) in the Terahertz spectrum of liquid water mainly arises from the modulations of the extent of intermolecular charge transfer through hydrogen bonds, called intermolecular charge fluxes, occurring upon molecular translations along the O…H hydrogen bonds. To obtain reasonable spectral profiles from simulations, it is necessary to effectively incorporate the effects of those intermolecular charge fluxes, but apparently it is not possible by simple classical molecular dynamics simulations with fixed atomic partial charges even if they are amended by molecular induced dipoles due to intermolecular electrostatic interactions. The present paper shows how we can do reasonably correct spectral simulations, without resorting to fully ab initio molecular dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental determination of the temperature-dependent Van Hove function in a Zr 80 Pt 20 liquid

Even though the viscosity is one of the most fundamental properties of liquids, the connection with the atomic structure of the liquid has proven elusive. By combining inelastic neutron scattering with the electrostatic levitation technique, the time-dependent pair-distribution function (i.e., the Van Hove function) has been determined for liquid Zr 80 Pt 20 . We show that the decay time of the first peak of the Van Hove function is directly related to the Maxwell relaxation time of the liquid, which is proportional to the shear viscosity. This result demonstrates that the local dynamics for increasing or decreasing the coordination number of local clusters by one determines the viscosity at high temperature, supporting earlier predictions from molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissociative excitation of vacuum ultraviolet emission features by electron impact on molecular gases. 3: CO2

Vacuum ultraviolet multiplets of C I, C II, and O I were produced by electron impact of CO2. Absolute emission cross sections for these multiplets were measured from threshold to 350 eV. The electrostatically focussed electron gun used in this series of experiments is described in detail. The atomic multiplets which were produced by dissociative excitation of CO2 and the cross sections at 100 eV are given. The dependence of the excitation functions on electron energy shows that these multiplets are produced by electric-dipole-allowed transitions in CO2.

Mumma, M. J.↗