Search NASA⌕ Search

SEARCH · Search NASA

Results for “engineering software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Visualization on supercomputing platform level II ASC milestone (3537-1B) results from Sandia.

This report provides documentation for the completion of the Sandia portion of the ASC Level II Visualization on the platform milestone. This ASC Level II milestone is a joint milestone between Sandia National Laboratories and Los Alamos National Laboratories. This milestone contains functionality required for performing visualization directly on a supercomputing platform, which is necessary for peta-scale visualization. Sandia's contribution concerns in-situ visualization, running a visualization in tandem with a solver. Visualization and analysis of petascale data is limited by several factors which must be addressed as ACES delivers the Cielo platform. Two primary difficulties are: (1) Performance of interactive rendering, which is most computationally intensive portion of the visualization process. For terascale platforms, commodity clusters with graphics processors(GPUs) have been used for interactive rendering. For petascale platforms, visualization and rendering may be able to run efficiently on the supercomputer platform itself. (2) I/O bandwidth, which limits how much information can be written to disk. If we simply analyze the sparse information that is saved to disk we miss the opportunity to analyze the rich information produced every timestep by the simulation. For the first issue, we are pursuing in-situ analysis, in which simulations are coupled directly with analysis libraries at runtime. This milestone will evaluate the visualization and rendering performance of current and next generation supercomputers in contrast to GPU-based visualization clusters, and evaluate the performance of common analysis libraries coupled with the simulation that analyze and write data to disk during a running simulation. This milestone will explore, evaluate and advance the maturity level of these technologies and their applicability to problems of interest to the ASC program. Scientific simulation on parallel supercomputers is traditionally performed in four sequential steps: meshing, partitioning, solver, and visualization. Not all of these components are necessarily run on the supercomputer. In particular, the meshing and visualization typically happen on smaller but more interactive computing resources. However, the previous decade has seen a growth in both the need and ability to perform scalable parallel analysis, and this gives motivation for coupling the solver and visualization.

99 GENERAL AND MISCELLANEOUS↗

Case Study: Leveraging GenAI to Build AI-based Surrogates and Regressors for Modeling Radio Frequency Heating in Fusion Energy Science

This work presents a detailed case study on using Generative AI (GenAI) to develop AI surrogates for simulation models in fusion energy research. The scope includes the methodology, implementation, and results of using GenAI to assist in model development and optimization, comparing these results with previous manually developed models.

Artificial Intelligence (cs.AI)↗

GEPA: Reflective Prompt Evolution Can Outperform Reinforcement Learning

Large language models (LLMs) are increasingly adapted to downstream tasks via reinforcement learning (RL) methods like Group Relative Policy Optimization (GRPO), which often require thousands of rollouts to learn new tasks. We argue that the interpretable nature of language often provides a much richer learning medium for LLMs, compared to policy gradients derived from sparse, scalar rewards. To test this, we introduce GEPA (Genetic-Pareto), a prompt optimizer that thoroughly incorporates natural language reflection to learn high-level rules from trial and error. Given any AI system containing one or more LLM prompts, GEPA samples trajectories (e.g., reasoning, tool calls, and tool outputs) and reflects on them in natural language to diagnose problems, propose and test prompt updates, and combine complementary lessons from the Pareto frontier of its own attempts. As a result of GEPA's design, it can often turn even just a few rollouts into a large quality gain. Across six tasks, GEPA outperforms GRPO by 6% on average and by up to 20%, while using up to 35x fewer rollouts. GEPA also outperforms the leading prompt optimizer, MIPROv2, by over 10% (e.g., +12% accuracy on AIME-2025), and demonstrates promising results as an inference-time search strategy for code optimization. We release our code at https://github.com/gepa-ai/gepa.

97 MATHEMATICS AND COMPUTING↗

A geospatial risk analysis graphical user interface for identifying hazardous chemical emission sources

Background: Performing back trajectory and forward trajectory using the Hybrid Single-Particle Lagrangian Integrated Trajectory Model (HYSPLIT) is a reliable approach for assessing particle transport after release among mid-field atmospheric models. HYSPLIT has an externally facing online interface that allows non-expert users to run the model trajectories without requiring extensive training or programming. However, the existing HYSPLIT interface is limited if simulations have a large amount of meteorological data and timesteps that are not coincident. The objective of this study is to design and develop a more robust tool to rapidly evaluate hazard transport conditions and to perform risk analysis, while still maintaining an intuitive and user-friendly interface. Methods: HYSPLIT calculates forward and backward trajectories of particles based on wind speed, wind direction, and the corresponding location, timestamp, and Pasquill stability classes of the regions of the atmosphere in terms of the wind speed, the amount of solar radiation, and the fractional cloud cover. The computed particle transport trajectories, combined with the online Proton Transfer Reaction-Mass Spectrometry (PTR-MS) data (https://figshare.com/articles/dataset/ARL_Data_from_PROS_station_at_Hanford_site/19993964), can be used to identify and quantify the sources and affected area of the hazardous chemicals’ emission using the potential source distribution function (PSDF). PSDF is an improved statistical function based on the well-known potential source contribution function (PSCF) in establishing the air pollutant source and receptor relationship. Performing this analysis requires a range of meteorological and pollutant concentration measurements to be statistically meaningful. The existing HYSPLIT graphical user interface (GUI) does not easily permit computations of trajectories of a dataset of meteorological data in high temporal frequency. To improve the performance of HYSPLIT computations from a large dataset and enhance risk analysis of the accidental release of material at risk, a geospatial risk analysis tool (GRAT-GUI) is created to allow large data sets to be processed instantaneously and to provide ease of visualization. Results: The GRAT-GUI is a native desktop-based application and can be run in any Windows 10 system without any internet access requirements, thus providing a secure way to process large meteorological datasets even on a standalone computer. GRAT-GUI has features to import, integrate, and convert meteorological data with various formats for hazardous chemical emission source identification and risk analysis as a self-explanatory user interface. The tool is available at https://figshare.com/articles/software/GRAT/19426742.

97 MATHEMATICS AND COMPUTING↗

Dysfunctional Scrum: Making it work in a matrixed environment

While we may be operating as dysfunctional Scrum teams at PNNL, where consistency of implementation will remain an ongoing goal, our experiences are showing a pattern of benefit from following the process as best we can. We have found value in socializing stories and user narratives to describe the user experience. We have teams that meet daily for 30 minutes and sit down while they do it, but it has proven valuable to them. We have had several successful teams deliver products even in our dysfunctional environment. Our ScrumMasters work multiple projects and strive for consistency but in our environment (R&D, engineering, and software development) we need to be adaptable and implement those aspects of the discipline that provide benefits to the teams and clients. Our implementations are not 'by the book,' but as long as teams and customers find value in it and our communication and quality of our software products are improved, then we expect to continue using Agile with Scrum.

99 GENERAL AND MISCELLANEOUS↗

FEM (finite element method) thermal modeling and thermal hydraulic performance of an enhanced thermal conductivity UO 2 /BeO composite fuel

An enhanced thermal conductivity UO 2 -BeO composite nuclear fuel was studied. A methodology to generate ANSYS (an engineering simulation software) FEM (Finite Element Method) thermal models of enhanced thermal conductivity oxide nuclear fuels was developed. The results showed significant increase in the fuel thermal conductivities and have good agreement with the measured ones. The reactor performance analysis showed that the decrease in centerline temperature was 250-350K for the UO 2 -BeO composite fuel, and thus we can improve nuclear reactors' performance and safety, and high-level radioactive waste generation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SOWFA Super-Controller: A High-Fidelity Tool for Evaluating Wind Plant Control Approaches

This paper presents a new tool for testing wind plant controllers in the Simulator for Offshore Wind Farm Applications (SOWFA). SOWFA is a high-fidelity simulator for the interaction between wind turbine dynamics and the fluid flow in a wind plant. The new super-controller testing environment in SOWFA allows for the implementation of the majority of the wind plant control strategies proposed in the literature.

17 WIND ENERGY↗

Residential Multi-Function Gas Heat Pump

This fact sheet describes a project by Southwest Gas Corporation, in collaboration with IntelliChoice Energy and Oak Ridge National Laboratory, to develop hardware and software for engine and system controls for a residential gas heat pump system that provides space cooling, heating, and hot water.

Combined Heat and Power↗

From PeleC to PeleACC, to PeleC++

PeleC is an Exascale Computing Project application for simulating compressible combustion in complex geometries. It has been built on top of the popular AMReX library. In the beginning of the Exascale Computing Project, PeleC was focused on KNL. It uses a mixture of C++, C, and kernels written in Fortran to obtain performance by focusing on vectorization. Recently we have taken two approaches in deciding PeleC's future for obtaining performance on exascale GPU machines. In the first programming model, we decorated the Fortran kernels with OpenACC directives. This expedited our ability to run at large scales on Summit's GPUs, where we achieved a significant speedup over the CPUs on Summit. The second programming model involved rewriting the Fortran kernels in C++ and using AMReX's Kokkos-like lambda abstractions for running on the GPU. This resulted in similar speedups on Summit's GPUs over merely utilizing the CPUs. Both approaches involved AMReX's management of memory transfers between the device and host. In this work, we compare and contrast the benefits and pitfalls to both programming approaches regarding performance, performance portability, and productivity. We also discuss advantages we have found in taking the time to modernize our code and why have chosen a specific pathway to prepare our code for the future DOE exascale machines.

exascale computing↗

BIM Interoperability Tool for Improving IFC-based Model Data Exchange Between Architectural Design and Structural Analysis for Linear Piping Components

There is a growing need in the AEC industry for the digitalization of model-based data exchange in BIM workflows. However, users continue to face difficulties exchanging data between BIM-based computer-aided design (CAD) and computer-aided engineering (CAE) software, even with the open, non-proprietary data exchange format called Industry Foundation Classes (IFC). Proposed solutions in academic research focus primarily on building systems, with comparatively little attention to piping models. Therefore, this paper introduces an interoperability tool for enabling piping model data exchange between architectural and structural analysis domains. The tool is tested using a piping model created in Autodesk Revit and shows marked improvement for IFC-based CAD-to-CAE interoperability over existing practice.

97 MATHEMATICS AND COMPUTING↗

Parameter Estimator for Engineering Systems

This software model generates vehicle parameter sets for downstream modeling applications using real-world data. Value to users is provided through improvements to modeling activities as a result of decreases in time taken during model development and validation. Currently configured for transportation modeling activities, the software provides initial estimates for multiple fundamental vehicle parameters including mass, coefficient of drag, and tire rolling resistance using real-world drive and duty cycle information as inputs.

Source record↗

Cement Fixation – Control System Upgrade [Slides]

Project description: Develop and deploy a new control system and necessary hardware upgrades for the cement fixation system in order to: Improve reliability of controls related hardware; Ensure drop-in, ‘like-for-like’ replacement parts are available; Create documentation and back-up software compatible with modern computers to eliminate the need to reverse-engineer documentation or software in the event of a failure.

42 ENGINEERING↗

Streaming Analytics and Data Engineering

SADE is a software package for rapidly assembling analytic pipelines to manipulate data. The packages consists of the engine that manages the data and coordinates the movement of data between the tasks performing a function, a set of core libraries consisting of plugins that perform common tasks, and a framework to extend the system supporting the development of new plugins. Currently through configuration files, a pipeline can be defined that maps the routing of data through a series of plugins. Pipelines can be run in a batch mode or can process streaming data; they can be executed from the command line or run through a Windows background service. There currently exists over a hundred plugins, over fifty pipeline configurations, and the software is now being used by about a half-dozen projects.

Source record↗

FLOP for FLAG Output Plotting

The Los Alamos hydrodynamics code, FLAG, is capable of dumping many types of output for many different variables in an array of formats. While some outputs are best viewed in a multidimensional engineering analysis visualization software, others are best viewed as 1-D “this versus that” curves. During development of a FLAG model, it is frequently required to quickly assess a model’s performance by reviewing such curves, and doing so may involve writing scripts repeatedly, adapting them each time to a specific model’s parameters. This report describes an application developed specifically to improve user efficiency in reviewing 1-D curve dumps from FLAG.

42 ENGINEERING↗

2011 SAPHIRE 8 Software Quality Assurance Status Report

The Software Quality Assurance engineer position was created in fiscal year 2011 to better maintain and improve the quality of the SAPHIRE 8 development program. This year's Software Quality Assurance tasks concentrated on developing the framework of the SQA program. This report reviews the accomplishments and recommendations for each of the subtasks set forth for JCN V6059: (1) Reviews, Tests, and Code Walkthroughs; (2) Data Dictionary; (3) Metrics; (4) Requirements Traceability Matrix; (5) Provide Oversight on SAPHIRE QA Activities; and (6) Support NRC Presentations and Meetings.

42 ENGINEERING↗

Position Papers for the ASCR Workshop on the Science of Scientific-Software Development and Use

Software is an increasingly important component in the pursuit of scientific discovery. Both its development and use are essential activities for many scientific teams. At the same time, very little scientific study has been conducted to understand, characterize, and improve the development and use of software for science. Computational science teams have diversified over time to include contributions from domain scientists who provide expertise in scientific and engineering disciplines, applied mathematicians and computer scientists who provide optimal algorithms and data structures, and software and data engineers who provide methodologies and tools adapted and adopted from other software domains. These diverse contributions have enabled tremendous advances in the pursuit of scientific discovery, even as models, computer architectures, and software environments have become more complicated. With this increasing diversity, we believe the next opportunity for qualitative improvement comes from applying the scientific method to understanding, characterizing, and improving how scientific software is developed and used. We believe that this pursuit requires expertise from computational scientists themselves, and from the cognitive and social sciences as well as the software engineering research community. As we look to increase the productivity and sustainability of the scientific-software-development-and-use cycle, a more systematic application of the scientific method to understand processes for software development and use will be a valuable tool to guide future work and result in more usable and sustainable software. This workshop will bring together computer scientists, software engineering researchers, computational scientists, applied mathematicians, social scientists, cognitive scientists, and others, to explore how we can conduct such systematic investigations, what can be learned, and how doing so will benefit the scientific enterprise. The workshop will be structured around a set of breakout sessions, with every attendee expected to participate actively in the discussions. Afterward, workshop attendees — from DOE, industry, and academia — will produce a report for ASCR that summarizes the findings of the workshop.

42 ENGINEERING↗