Search NASA⌕ Search

SEARCH · Search NASA

Results for “extrapolate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Shoreline wave breaking strongly enhances the coastal sea spray aerosol population: Climate and air quality implications

Sea spray aerosol (SSA) emission is a major source of atmospheric aerosols, influencing global climate and coastal air quality. Much of our knowledge about SSA derives from coastal observations near shorelines, but whether and when these observations accurately represent open oceans remain unclear. Here, we show that strong nearshore SSA production during high-wave periods greatly enhances downwind cloud condensation nuclei (CCN) and aerosol mass concentrations. Strong shoreline wave breaking is widespread globally, and swell waves, which are decoupled from local winds, play a dominant role in many coastal regions. Therefore, extrapolating results based on coastal measurements to open oceans may significantly overestimate SSA concentration and its contribution to CCN and, by extension, the impact of SSA on clouds and climate. Additionally, the strong enhancement of coastal aerosol population by shoreline wave breaking and its environmental impact on coastal communities cannot be captured by current regional models, which do not parameterize nearshore SSA generation using wave energy or completely neglect it.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A new way to unravel the $^{12}$C($\alpha $,$\gamma $)$^{16}$O cross section components using neural networks

The $^{12}$C($\alpha $,$\gamma $)$^{16}$O reaction rate is crucial in determining the carbon-to-oxygen abundance ratio in stellar nucleosynthesis. Measuring this reaction’s cross section at stellar energies is challenging due to its extremely small value, approximately 10 -17 barn at E c.m. = 300 keV. To address this, R-matrix calculations are employed to extrapolate data to lower energies, requiring a comprehensive understanding of each contribution to the cross section. The dominant contributions to the cross section at stellar energies arise from electric dipole (E1) and electric quadrupole (E2) transitions to the ground state of 16 O, along with a significant cascade contribution. Traditionally, these contributions have been separated using the γ-ray angular distribution. In this work, we propose a novel technique using the energy distribution of the 16 O recoils at the focal plane. This method involves a neural network trained on detailed Monte Carlo simulations of the energy distribution of recoils transported through the recoil mass separator ERNA. This approach enables the simultaneous determination of all three contributions with errors around 10% in the energy range E c.m. = 1.0–2.2 MeV. In conclusion, by employing this new technique, we aim to significantly improve the accuracy of determining the cross section of the $^{12}$C($\alpha $,$\gamma $)$^{16}$O reaction at astrophysical energies.

Astrochemistry↗
DOE OSTI2025

Measurement of the production cross section of prompt $\Xi ^0_{\textrm{c}}$ baryons in p–Pb collisions at $\sqrt{s_{{\textrm{NN}}}}=5.02$ TeV

The transverse momentum (p T ) differential production cross section of the promptly produced charm-strange baryon $\Xi ^0_{\textrm{c}}$ (and its charge conjugate $\Xi ^0_{\textrm{c}}$) is measured at midrapidity via its hadronic decay into π + $\Xi$ – in p–Pb collisions at a centre-of-mass energy per nucleon–nucleon collision $\sqrt{s_{{\textrm{NN}}}}=5.02$ TeV with the ALICE detector at the LHC. The $\Xi ^0_{\textrm{c}}$ nuclear modification factor (R pPb ), calculated from the cross sections in pp and p–Pb collisions, is presented and compared with the R pPb of Λ$^{+}_{c}$ baryons. The ratios between the p T -differential production cross section of $\Xi ^0_{\textrm{c}}$ baryons and those of D 0 mesons and Λ$^{+}_{c}$ baryons are also reported and compared with results at forward and backward rapidity from the LHCb Collaboration. The measurements of the production cross section of prompt $\Xi ^0_{\textrm{c}}$ baryons are compared with a model based on perturbative QCD calculations of charm-quark production cross sections, which includes only cold nuclear matter effects in p–Pb collisions, and underestimates the measurement by a factor of about 50. This discrepancy is reduced when the data is compared with a model that includes string formation beyond leading-colour approximation or in which hadronisation is implemented via quark coalescence. The p T -integrated cross section of prompt $\Xi ^0_{\textrm{c}}$-baryon production at midrapidity extrapolated down to p T = 0 is also reported. These measurements offer insights and constraints for theoretical calculations of the hadronisation process. Additionally, they provide inputs for the calculation of the charm production cross section in p–Pb collisions at midrapidity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

First demonstration of a TES based cryogenic Li 2 MoO 4 detector for neutrinoless double beta decay search

Cryogenic calorimetric experiments to search for neutrinoless double-beta decay (0vββ) are highly competitive, scalable and versatile in isotope. The largest planned detector array, CUPID, is comprised of about 1500 individual Li 2 100 MoO 4 detector modules with a further scale up envisioned for a follow up experiment (CUPID-1T). In this article, we present a novel detector concept targeting this second stage with a low impedance TES based readout for the Li 2 MoO 4 absorber that is easily mass-produced and lends itself to a multiplexed readout. We present the detector design and results from a first prototype detector operated at the NEXUS shallow underground facility at Fermilab. The detector is a 2-cm-side cube with 21 g mass that is strongly thermally coupled to its readout chip to allow rise-times of ~0.5 ms. This design is more than one order of magnitude faster than present NTD based detectors and is hence expected to effectively mitigate backgrounds generated through the pile-up of two independent two neutrino decay events coinciding close in time. Together with a baseline resolution of 1.95 keV (FWHM) these performance parameters extrapolate to a background index from pile-up as low as 5 • 10 –6 counts/keV/kg/yr in CUPID size crystals. The detector was calibrated up to the MeV region showing sufficient dynamic range for 0vββ searches. In combination with a SuperCDMS HVeV detector this setup also allowed us to perform a precision measurement of the scintillation time constants of Li 2 MoO 4 , which showed a primary component with a fast O(20 μs) time scale. Similar content being viewe

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

First results of the NEXT-100 detector using $^{83m}$Kr decays

The NEXT collaboration is investigating the double beta decay of $ ^{136}\mathrm Xe$ using high-pressure gas electroluminescent time projection chambers, which provide excellent energy resolution together with a robust topological signature. Operating at the Laboratorio Subterráneo de Canfranc (LSC) and building on the success of the NEXT-White detector, the NEXT-100 apparatus began commissioning in May 2024 and started operation with xenon at a pressure of 4 bar in October 2024. We report here the first results obtained with NEXT-100 using low-energy calibration data from $^{83\text {m}}\textrm{Kr}$ decays, which allow mapping of the detector response in the active volume and monitoring of its stability over time. After homogenizing the light response, we achieve an energy resolution of 4.37% FWHM at 41.5 keV for $^{83\text {m}}\textrm{Kr}$ point-like energy deposits contained in a radius of 425 mm. In a fiducial region representing the operating conditions of NEXT-100 at 10 bar we obtain an improved energy resolution of 4.16% FWHM. These results are in good agreement with that obtained in NEXT-White, and an $E^{-1/2}$ extrapolation to $Q_{\beta \beta }$ yields an energy resolution close to 0.5% FWHM, well below the 1% FWHM design target.

Martínez-Lema, G. [Donostia Intl. Phys. Ctr., San ↗
DOE OSTI2025

Do holographic CFT states have unique semiclassical bulk duals?

Here, we discuss a situation where a holographic CFT state has multiple semiclassical bulk duals. In our example, a given holographic state has two simple, semiclassical descriptions, one with a closed universe, constructed using the gravitational path integral, and one without a closed universe, constructed using the extrapolate dictionary. This highlights an ambiguity in the AdS/CFT dictionary. We propose various options for resolving this tension although none is perfectly satisfactory. We also discuss what this implies for the black hole interior and the gravitational path integral.

AdS/CFT correspondence↗
DOE OSTI2024

Remark on Algorithm 1012: Computing Projections with Large Datasets

In ACM TOMS Algorithm 1012, the DELAUNAYSPARSE software is given for performing Delaunay interpolation in medium to high dimensions. When extrapolating outside the convex hull of the training set, DELAUNAYSPARSE calls the nonnegative least squares solver DWNNLS to compute projections onto the convex hull. However, DWNNLS and many other available sum-of-squares optimization solvers were not intended for usage with many variable problems, which result from the large training sets that are typical in machine learning applications. Thus, a new PROJECT subroutine is given, based on the highly customizable quadratic program solver BQPD. This solution is shown to be as robust as DELAUNAYSPARSE for projection onto both synthetic and real-world datasets, where other available solvers frequently fail. Although it is intended as an update for DELAUNAYSPARSE, due to the difficulty and prevalence of the problem, this solution is likely to be of external interest as well.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Significant Improvements to Si Calendar Lifetime Using Rapid Electrolyte Screening via Potentiostatic Holds

Silicon-based lithium-ion batteries exhibit severe time-based degradation resulting in poor calendar lives. This has been identified as the major impediment towards commercialization with cycle life considered a solved issue through nanosizing and protective coatings allowing over 1000 cycles of life to be achieved. In this work, rapid screening of sixteen electrolytes for calendar life extension of Si-rich systems (70 wt% Si) is performed using the voltage hold (V-hold) protocol. V-hold significantly shortens the testing duration over the traditional open circuit voltage reference performance test allowing us to screen electrolytes within a span of two months. We find a novel ethylene carbonate (EC) free electrolyte formulation containing lithium hexafluorophosphate (LiPF 6 ) salt, and binary solvent mix of fluoroethylene carbonate (FEC), ethyl methyl carbonate (EMC) that extends calendar life of Si cells as compared to conventional EC based electrolyte. Our coupled experimental-theoretical analysis framework provides a decoupling of the parasitic currents during V-hold, allowing us to extrapolate the capacity loss to predict semiquantitative calendar lifetimes. Subsequently, cycle aging and oxidative stability tests of the EC free system also show enhanced performance over baseline electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2026

Conditional Latent Diffusion for High-Resolution Prediction of Electrochemical Surface Morphology

A conditionally guided generative latent diffusion process that is trained on a set of experimental processing parameters and their associated resulting electron microscope images of the electrodeposition process is able to interpolate between processing parameters in a physically consistent way. Electrodeposition of rhenium with pulse and pulse-reverse waveforms is used as a model system, and the process is adaptable to other electrodeposition, electropolishing, or corrosion processes. The method is able to extrapolate, predicting estimates of material morphologies for experimental setups unseen in the training data. The results are demonstrated with experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermodynamics-informed latent space dynamics identification

This software showcases a latent space dynamics identification method, namely tLaSDI, that embeds the first and second principles of thermodynamics. The latent variables are learned through an autoencoder as a nonlinear dimension reduction model. The latent dynamics are constructed by a neural network-based model that precisely preserves certain structures for the thermodynamic laws through the GENERIC formalism. An abstract error estimate is established, which provides a new loss formulation involving the Jacobian computation of autoencoder. The autoencoder and the latent dynamics are simultaneously trained to minimize the new loss. Computational examples demonstrate the effectiveness of tLaSDI, which exhibits robust generalization ability, even in extrapolation. In addition, an intriguing correlation is empirically observed between a quantity from tLaSDI in the latent space and the behaviors of the full-state solution.

Cheung, Siu Wun↗
DOE OSTI2024

ninterp: N-dimensional interpolation Rust crate [SWR-25-25]

The ninterp crate provides multivariate interpolation over a regular, sorted, nonrepeating grid of any dimensionality. A variety of interpolation strategies are implemented, however more are likely to be added. Extrapolation beyond the range of the supplied coordinates is supported for 1-D linear interpolators, using the slope of the nearby points. There are hard-coded interpolators for lower dimensionalities (up to N = 3) for better runtime performance. All interpolation is handled through instances of the Interpolator enum, with the selected tuple variant containing relevant data. Interpolation is executed by calling Interpolator::interpolate.

Carow, Kyle↗
DOE OSTI2025

Regional Oil and gas Aerial Methane Synthesis model (ROAMS) v2.0

The Regional Oil and gas Aerial Methane Synthesis model is a tool to convert the results of wide-area, source-resolved aerial methane remote sensing surveys of oil and natural gas infrastructure in a given region into methane emissions inventories (estimates of the magnitude and breakdown of methane emissions from the surveyed infrastructure). The tool leverages databases of source-resolved methane emissions detected in aerial surveys, aerial survey coverage information (which areas were measured and when), data summarizing surveyed oil and natural gas infrastructure and production (derived from third-party databases), as well as state-of-the-art mechanistic emissions simulation tools to characterize emissions too small for the aerial system to see. The regional methane emissions estimates produced by this tool are much more granular in both space and asset type than common satellite- or flux tower-based regional estimates. Unlike other tools for converting site-level measurements into regional emissions estimates, our unique geostatistical approach integrates aerially measured emissions with limited need for statistical extrapolation, which can be highly sensitive to modeler assumptions. As a result, ROAMS-based estimates of regional methane emissions from oil and gas activity are widely viewed as highly credible, as evidenced by the success of Dr. Sherwin's recent paper in Nature.

Sherwin, Evan [Lawrence Berkeley National Laborato↗
DOE OSTI2025

Regional Oil and gas Aerial Methane Synthesis model (Analytica) (ROAMS Analytica) v1.5.2

The Regional Oil and gas Aerial Methane Synthesis model (Analytica) is a tool to convert the results of wide-area, source-resolved aerial methane remote sensing surveys of oil and natural gas infrastructure in a given region into methane emissions inventories (estimates of the magnitude and breakdown of methane emissions from the surveyed infrastructure). This version is written in the Analytica programming language, and this version accompanies a correction in preparation for submission to Sherwin et al. 2024 (Nature). The tool leverages databases of source-resolved methane emissions detected in aerial surveys, aerial survey coverage information (which areas were measured and when), data summarizing surveyed oil and natural gas infrastructure and production (derived from third-party databases), as well as state-of-the-art mechanistic emissions simulation tools to characterize emissions too small for the aerial system to see. The regional methane emissions estimates produced by this tool are much more granular in both space and asset type than common satellite- or flux tower-based regional estimates. Unlike other tools for converting site-level measurements into regional emissions estimates, our unique geostatistical approach integrates aerially measured emissions with limited need for statistical extrapolation, which can be highly sensitive to modeler assumptions. As a result, ROAMS-based estimates of regional methane emissions from oil and gas activity are widely viewed as highly credible, as evidenced by the success of Dr. Sherwin's recent paper in Nature.

Sherwin, Evan [Lawrence Berkeley National Laborato↗
DOE OSTI2026

Systematic correction of the density functional theory spectra via a quantum Monte Carlo approach

Numerical outputs and driver scripts supporting auxiliary-boson corrected diffusion Monte Carlo (ABCDMC) benchmarks on second-row neutral atoms, cations, and dications, plus a C2 molecule active-space study. Includes NIST reference energies, ABCDMC timestep extrapolation summaries, orbital generation inputs, singles-only CASCI driver scripts, an O-atom basis-set convergence study, and the PyQMC boson code snapshot used for the calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evaluation of data driven low-rank matrix factorization for accelerated solutions of the Vlasov equation

Low-rank methods have shown success in accelerating simulations of a collisionless plasma described by the Vlasov equation, but still rely on computationally costly linear algebra every time step. We propose a data-driven factorization method using artificial neural networks, specifically with convolutional layer architecture, that trains on existing simulation data. At inference time, the model outputs a low-rank decomposition of the distribution field of the charged particles, and we demonstrate that this step is faster than the standard linear algebra technique. Numerical experiments show that the method achieves comparable reconstruction accuracy for interpolation tasks, generalizing to unseen test data in a manner beyond just memorizing training data; patterns in factorization also inherently followed the same numerical trend as those within algebraic methods (e.g., truncated singular-value decomposition). However, when training on the first 70% of a time-series data and testing on the remaining 30%, the method fails to meaningfully extrapolate. Despite this limiting result, the technique may have benefits for simulations in a statistical steady-state or otherwise showing temporal stability. These results suggest that while the model offers a computationally efficient alternative for datasets with temporal stability, its current formulation is best suited for interpolation rather than for predicting future states in time-evolving systems. This study thus lays the groundwork for further refinement of neural network-based approaches to low-rank matrix factorization in high-dimensional plasma simulations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

A Nonergodic Ground-Motion Model for the San Francisco Bay Area for Small-Magnitude Earthquakes

ABSTRACT Recently, generative models have become a computationally efficient alternative to physics-based numerical simulations of ground motions. Neural networks can learn from existing ground-motion data to generate unobserved ground-motion data at new source and site locations. A key challenge with generative models is ensuring that predicted ground motions remain within a physically realistic range. For this purpose, we developed an empirical, nonergodic ground-motion model (GMM) for small-magnitude earthquakes in the San Francisco Bay area based on about 5000 recordings per component for Mw ≤ 4 earthquakes. The nonergodic GMM predicts spatially varying median source, site, and path effects for both the Fourier amplitude spectrum (FAS) and the Fourier phase derivative (a proxy for duration), as well as the corresponding epistemic uncertainty for each term. For FAS, our model shows above-average source and site effects in the western part of the region and below-average effects in the eastern part, with regional effects exhibiting larger spatial correlation lengths with increasing frequency. For duration, the source term is negligible for small-magnitude earthquakes, and the site term leads to site-specific variations up to 5 s. Path effects for FAS and duration depend on the source–site pair and are extrapolated spatially using recent methods for path-effect modeling. The aleatory variability of the within-site within-path residuals is similar to the variability found in previous studies for other regions. The nonergodic model provides two key contributions: first, median adjustment terms that are transferable to larger magnitude earthquakes, further reducing aleatory variability in probabilistic seismic hazard analysis; second, region-specific criteria for validating machine learning-based ground-motion generators to evaluate whether synthetic ground motions exhibit physically realistic source, site, and path effects.

Lacour, Maxime↗
DOE OSTI2024

Geologic Characterization of the South Georgia Rift Basin for Source Proximal CO2 Storage

The project Geologic Characterization of the South Georgia Rift Basin for Source Proximal CO2 Storage is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The South Carolina Research Foundation and partners evaluated the feasibility of CCS in the Jurassic/ Triassic (J / TR) saline formations of the buried Mesozoic South Georgia Rift (SGR) Basin that extends from South Carolina into Georgia. The J / TR sequence, based on preliminary assessment of limited geologic and geophysical data, appears to have both the appropriate areal extent and multiple horizons to permanently and safely store CO2 The presence of several igneous rock layers within the sequence may potentially provide adequate seals to prevent upward CO2 migration into the Coastal Plain aquifer systems. Approximately 81 kilometers of 2-D seismic reflection data were collected by Bay Geophysical, Inc. to explore a portion of the SGR located in southern Georgia. The 81 kilometers were divided into two lines approximately 40.5 kilometers each, with Line 1 intersecting Georgia well GGS 3457. Line 2 intersects Line 1 at the southern portion of Line 1 to maximize the extent of coverage away from GGS-3457 (a deep well drilled in the 1980s for oil and gas exploration). This well had a set of usable logs, including gamma and neutron logs that provided promising results related to CO2 storage. Results showed sandstone with porosity values greater than 10 percent and a thickness of 120 meters. The design of the seismic shot was to extrapolate information away from the well and to better define the extent of the SGR and the necessary reservoir and caprock for a successful CO2 injection. A numerical simulation model of CO2 Injection and migration was developed based on the geology log for the GGS-3457 well. The simulation model was used to investigate the feasibility of injecting 30 million metric tons of CO2 into SGR J / TA sediments and integrity of the diabase layers as seals to prevent CO2 migration.

2-D seismic↗
DOE OSTI2024

Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region

The project Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The Rocky Mountain Carbon Capture and Storage (RMCCS) project investigated multiple geologic formations and characterized a local site on the Colorado Plateau for future CCS opportunities. The RMCCS project focused on the Cretaceous Dakota, Jurassic Entrada, and Pennsylvanian Weber Sandstones, the three largest regional formations. All formations in this project are potential CO2 storage resources for future power plants, natural gas processing plants, cement plants, and oil shale development projects. The area adjacent to Craig, Colorado, (Sand Wash Basin) was the area selected for detailed geologic characterization on the RMCCS project. The basin was selected in part because the geology can be extrapolated to other sites on the Colorado Plateau. Field mapping and seismic surveys were conducted to identify and evaluate the basin's structural configuration. A 9,745-foot deep characterization well was drilled to collect 131 feet of core and a suite of geophysical well log data. Petrophysical tests on samples of core were used to calibrate geophysical log data, which can be used to obtain storage resource estimates and evaluate associated uncertainty as well as simulate the hydrologic behavior of injected CO2. A detailed analysis of the primary formations (Dakota, Entrada and Weber sandstones) yielded a more accurate CO2 storage resource assessment for these formations within the Colorado Plateau; RMCCS estimates indicate a total CO2 storage resource of more than 38,000 million metric tons. The characterization of the Sand Wash Basin (2-D seismic surveys, multiple well logs and lithological, petrophysical and geochemical analyses) allowed for a detailed 3-D model to be constructed. The model served as the framework for analyses ranging from CO2 storage resource, injectivity, and subsurface flow to uncertainty estimates to evaluation of risk.

2-D seismic↗