Search NASA⌕ Search

SEARCH · Search NASA

Results for “flow solver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Wind-US Code Physical Modeling Improvements to Complement Hypersonic Testing and Evaluation

This report gives an overview of physical modeling enhancements to the Wind-US flow solver which were made to improve the capabilities for simulation of hypersonic flows and the reliability of computations to complement hypersonic testing. The improvements include advanced turbulence models, a bypass transition model, a conjugate (or closely coupled to vehicle structure) conduction-convection heat transfer capability, and an upgraded high-speed combustion solver. A Mach 5 shock-wave boundary layer interaction problem is used to investigate the benefits of k- s and k-w based explicit algebraic stress turbulence models relative to linear two-equation models. The bypass transition model is validated using data from experiments for incompressible boundary layers and a Mach 7.9 cone flow. The conjugate heat transfer method is validated for a test case involving reacting H2-O2 rocket exhaust over cooled calorimeter panels. A dual-mode scramjet configuration is investigated using both a simplified 1-step kinetics mechanism and an 8-step mechanism. Additionally, variations in the turbulent Prandtl and Schmidt numbers are considered for this scramjet configuration.

Georgiadis, Nicholas J.↗
DOE OSTI2021

densegranFoam

densegranFoam is a dense granular material flow solver developed using the OpenFoam Computational Fluid Dynamics (CFD) tool. It is developed using Euler-Euler framework. The transport model is implemented using the shear rate dependant constitutive model. The primary focus of the solver is to simulate shear rate dependency on the dense granular flow bulk behavior.

Ahsan, Syed↗
NASA NTRS1986

Navier-Stokes computations for exotic airfoils

A hyperbolic grid generator with improvements for handling sharp corners and concave surfaces combined with a Navier-Stokes flow solver is applied to complex two dimensional airfoil configurations. Steady separated flow about an iced leading edge of an airfoil is presented. Unsteady viscous separated flows past an airfoil at two angles of attack with a spoiler deployed at 60 deg are compared with experiment. The spoiler computations are performed with two different topological maps of the physical domain to the computational domain. Graphical techniques for the static and unsteady display of the flow fields are discussed.

Barth, T. J.↗
NASA NTRS1993

Virtual zone Navier-Stokes computations for oscillating control surfaces

A new zoning method called 'virtual zones' has been developed for application to an unsteady finite difference Navier-Stokes code. The virtual zoning method simplifies the zoning and gridding of complex configurations for use with patched multi-zone flow codes. An existing interpolation method has been extensively modified to bring the run time for the interpolation procedure down to the same level as for the flow solver. Unsteady Navier-Stokes computations have been performed for transonic flow over a clipped delta wing with an oscillating control surface. The computed unsteady pressure and response characteristics of the control-surface motion compare well with experimental data.

Klopfer, G. H.↗
NASA NTRS2004

Procedure for Determining One-Dimensional Flow Distributions in Arbitrarily Connected Passages Without the Influence of Pumping

A calculation procedure is presented which allows the one-dimensional determination of flow distributions in arbitrarily connected (branching) flow passages having multiple inlets and exits. The procedure uses an adaptation of the finite element technique, iteratively coupled with an accurate one-dimensional flow solver. The procedure eliminates the usual restrictions inherent with finite element flow calculations. Unlike existing one-dimensional methods, which require simplifications to the flow equations (uncoupling the momentum and energy equations), to allow for arbitrary branching and multiple inlets and exits, the only limitation of the described methodology is that, at present, it can only accommodate non-rotating configurations (no pumping effects). The calculation procedure is robust, and will always converge for physically possible flow. The procedure is described, and its use is illustrated by an example.

Meitner, Peter L.↗
NASA NTRS2008

A New Paradigm for Flow Analyses and a Novel Technique to Enhance the Thrust from Scarfed Nozzles

A new flow analysis paradigm and a novel technique to enhance scarfed nozzle thrust are presented. The new paradigm, the space-time Conservation Element and Solution Element (CESE) method, a truly unsteady and genuinely multi-dimensional flow solver that provides accurate solutions for Euler and Navier-Stokes flows, is well suited for next generation flow analyses.In this study, the space-time CESE method was applied to solve scarfed nozzles flow-fields. Nozzle scarfing is frequently used for vectoring control of a space propulsion sub-system; it reduces nozzle weight and length and lowers nozzle thrust. A novel technique to enhance scarfed nozzles' thrust is discussed and investigated. Results of 2D and 3D flow analyses are presented.

Chang, I-Shih↗
NASA NTRS2009

Improvements in Modeling 90 degree Bleed Holes for Supersonic Inlets

The modeling of porous bleed regions as boundary conditions in computational fluid dynamics (CFD) simulations of supersonic inlet flows has been improved through a scaling of sonic flow coefficient data for 90deg bleed holes. The scaling removed the Mach number as a factor in computing the sonic flow coefficient and allowed the data to be fitted with a quadratic equation, with the only factor being the ratio of the plenum static pressure to the surface static pressure. The implementation of the bleed model into the Wind-US CFD flow solver was simplified by no longer requiring the evaluation of the flow properties at the boundary-layer edge. The quadratic equation can be extrapolated to allow the modeling of small amounts of blowing, which can exist when recirculation of the bleed flow occurs within the bleed region. The improved accuracy of the bleed model was demonstrated through CFD simulations of bleed regions on a flat plate in supersonic flow with and without an impinging oblique shock. The bleed model demonstrated good agreement with experimental data and three-dimensional CFD simulations of bleed holes.

Slater, John W.↗
NASA NTRSDate not supplied

CFD Modeling of Cryogenic Chilldown in a Complex Channel under Normal and Low Gravity Conditions

Future NASA architectures have baselined cryogenic propulsion systems as well as cryogenic fluid management to support lunar missions and ultimately to support future missions to Mars. These missions will require chilling hardware down prior to engine restart as well as chilling lines and tanks prior to transferring and refueling these propulsion elements in orbit. In lieu of expensive tests conducted on-orbit, accurate predictive computational models of these chilldown processes can be used to reduce system and propellant mass as well as mission risk. To gain confidence in these computational models, appropriate anchoring and validation to experimental data in a relevant environment needs to be performed. Recent ground and sub-orbital flight experiments conducted by the Japan Aerospace Exploration Agency (JAXA) investigated chilldown of a complex channel resembling a turbopump bearing cavity at low flow rates. This work presents Computational Fluid Dynamics (CFD) model development of the chilldown experiment employing two-phase flow boiling models available in commercial CFD software STAR-CCM+ using Volume of Fluid (VOF) and the traditional Euler-Euler multiphase flow solvers. Comparisons of the numerical and experimental results under normal and low-gravity conditions are presented. An assessment of solid wall temperatures and phase distribution yielded important insights into multiphase solver choice, dependence on gravity environment, and challenges associated with cryogenic flow boiling prediction and validation.

CFD↗
DOE OSTI2019

deal.II Implementation of a Weak Galerkin Finite Element Solver for Darcy Flow

This paper presents a weak Galerkin (WG) finite element solver for Darcy flow and its implementation on the deal.II platform. The solver works for quadrilateral and hexahedral meshes in a unified way. It approximates pressure by Q-type degree $k(≥ 0)$ polynomials separately defined in element interiors and on edges/faces. In this work, numerical velocity is obtained in the unmapped Raviart-Thomas space $RT_{[k]}$ via postprocessing based on the novel concepts of discrete weak gradients. The solver is locally mass-conservative and produces continuous normal fluxes. The implementation in deal.II allows polynomial degrees up to 5. Numerical experiments show that our new WG solver performs better than the classical mixed finite element methods.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2018

LAVA Simulations for the 3rd AIAA CFD High Lift Prediction Workshop with Body Fitted Grids

In response to the 3rd AIAA CFD High Lift Prediction Workshop, the workshop cases were analyzed using Reynolds-averaged Navier-Stokes flow solvers within the Launch Ascent and Vehicle Aerodynamics (LAVA) solver framework. For the workshop cases the advantages and limitations of both overset-structured an unstructured polyhedral meshes were assessed. The workshop included 3 cases: a 2D airfoil validation case, a mesh convergence study using the High Lift Common Research Model, and a nacelle/pylon integration study using the JAXA (Japan Aerospace Exploration Agency) Standard Model. The 2D airfoil case from the workshop is used to verify the implementation of the Spalart-Allmaras turbulence model along with some of its variants within the solver. The High Lift Common Research Model case is used to assess solver performance and accuracy at varying mesh resolutions, as well as identify the minimum mesh fidelity required for LAVA on this class of problem. The JAXA Standard Model case is used to assess the solver's sensitivity to the turbulence model and to compare the structured and unstructured mesh paradigms. These workshop cases have helped establish best practices for high lift flow configurations for the LAVA solver.

LAVA↗
NASA NTRSDate not supplied

Towards an Automated Unstructured Grid Adaptation Workflow with VULCAN

Early work is presented for an unstructured grid adaptation workflow with VULCAN and refine. Anisotropic simplex grids are iteratively adapted to match a Riemannian metric tensor field describing desired mesh spacing. The Riemannian metric tensor field is obtained from Hessians of CFD solution output scalar sensor fields; both Mach number and static temperature sensor fields are explored. In addition, we describe a Newton-method-based solver recently implemented in VULCAN utilizing Jacobian-Free-Newton-Krylov that can be used to increase flow solver automation on early grids in the adadptation process. Hypersonic flow solutions are presented on a high Reynolds number flat plate and wall heat flux is compared against a highly resolved structured solution. Additionally, complex shock boundary-layer interaction is explored in a high Mach number compression corner and complex 3D flow phenomena are evaluated on the Boundary Layer Transition (BOLT) vehicle.

Matthew O'Connell↗
DOE OSTI2019

Nanoparticle diffusion in sheared cellular blood flow

Using a multiscale blood flow solver, the complete diffusion tensor of nanoparticles (NPs) in sheared cellular blood flow is calculated over a wide range of shear rate and haematocrit. In the short-time regime, NPs exhibit anomalous dispersive behaviors under high shear and high haematocrit due to the transient elongation and alignment of the red blood cells (RBCs). In the long-time regime, the NP diffusion tensor features high anisotropy. Particularly, there exists a critical shear rate ( ${\sim}100~\text{s}^{-1}$ ) around which the shear-rate dependence of the diffusivity tensor changes from linear to nonlinear scale. Above the critical shear rate, the cross-stream diffusivity terms vary sublinearly with shear rate, while the longitudinal term varies superlinearly. The dependence on haematocrit is linear in general except at high shear rates, where a sublinear scale is found for the vorticity term and a quadratic scale for the longitudinal term. Through analysis of the suspension microstructure and numerical experiments, the nonlinear haemorheological dependence of the NP diffusion tensor is attributed to the streamwise elongation and cross-stream contraction of RBCs under high shear, quantified by a capillary number. The RBC size is shown to be the characteristic length scale affecting the RBC-enhanced shear-induced diffusion (RESID), while the NP submicrometre size exhibits negligible influence on the RESID. Based on the observed scaling behaviours, empirical correlations are proposed to bridge the NP diffusion tensor to specific shear rate and haematocrit. As a result, the characterized NP diffusion tensor provides a constitutive relation that can lead to more effective continuum models to tackle large-scale NP biotransport applications.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

CFD Evaluation of Pressure Change Along Coolant Passages in Sodium-Cooled Fast Reactor with Nek5000

To support the design efforts of advanced sodium-cooled fast reactors (SFRs), a series of computational fluid dynamics (CFD) simulations are performed to investigate the pressure change along various flow passages in the proposed SFR system. The simulations are carried out with the state-of-the-art spectral element flow solver, Nek5000. Two specific case studies are presented in this paper: the flow exiting the axial neutron reflector channels and the flow entering the fuel pin bundle. Due to the high Reynolds numbers expected, a Reynolds-averaged Navier-Stokes (RANS) approach is necessary to model the turbulence. A newly developed regularized k-omega RANS model is adopted in the related CFD calculations. The first case study explores the effect of Reynolds number on the pressure change when flow exits the reflector channels. The pressure change in this case has two major contributors: the change due to wall friction and the Bernoulli effect. It is noted that the nondimensional pressure loss follows a log-linear trend up to Re = 10 5 , and then the trend is flattened. In the second case study, the advanced NekNek coupling capability is tested where an integral domain can be divided into multiple subdomains with coupling interfaces, which would greatly ease the meshing process of complex engineering geometries and potentially save computational resources. The preliminary results obtained so far confirm the consistency between the NekNek results and those produced by regular Nek5000 simulation. The presented work demonstrates the readiness and flexibility of the related CFD techniques, which is part of the broader effort to leverage cutting-edge CFD to inform the advanced nuclear reactor designs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2017

Advanced Fluid Reduced Order Models for Compressible Flow.

This report summarizes fiscal year (FY) 2017 progress towards developing and implementing within the SPARC in-house finite volume flow solver advanced fluid reduced order models (ROMs) for compressible captive-carriage flow problems of interest to Sandia National Laboratories for the design and qualification of nuclear weapons components. The proposed projection-based model order reduction (MOR) approach, known as the Proper Orthogonal Decomposition (POD)/Least- Squares Petrov-Galerkin (LSPG) method, can substantially reduce the CPU-time requirement for these simulations, thereby enabling advanced analyses such as uncertainty quantification and de- sign optimization. Following a description of the project objectives and FY17 targets, we overview briefly the POD/LSPG approach to model reduction implemented within SPARC . We then study the viability of these ROMs for long-time predictive simulations in the context of a two-dimensional viscous laminar cavity problem, and describe some FY17 enhancements to the proposed model reduction methodology that led to ROMs with improved predictive capabilities. Also described in this report are some FY17 efforts pursued in parallel to the primary objective of determining whether the ROMs in SPARC are viable for the targeted application. These include the implemen- tation and verification of some higher-order finite volume discretization methods within SPARC (towards using the code to study the viability of ROMs on three-dimensional cavity problems) and a novel structure-preserving constrained POD/LSPG formulation that can improve the accuracy of projection-based reduced order models. We conclude the report by summarizing the key takeaways from our FY17 findings, and providing some perspectives for future work.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1990

Prediction of blade-vortex interaction noise using airloads generated by a finite-difference technique

The present numerical finite-difference scheme for helicopter blade-load prediction during realistic, self-generated three-dimensional blade-vortex interactions (BVI) derives the velocity field through a nonlinear superposition of the rotor flow-field yielded by the full potential rotor flow solver RFS2 for BVI, on the one hand, over the rotational vortex flow field computed with the Biot-Savart law. Despite the accurate prediction of the acoustic waveforms, peak amplitudes are found to have been persistently underpredicted. The inclusion of BVI noise source in the acoustic analysis significantly improved the perceived noise level-corrected tone prediction.

Tadghighi, Hormoz↗
NASA NTRS1992

MAG3D and its application to internal flowfield analysis

MAG3D (multiblock adaptive grid, 3D) is a 3D solution-adaptive grid generation code which redistributes grid points to improve the accuracy of a flow solution without increasing the number of grid points. The code is applicable to structured grids with a multiblock topology. It is independent of the original grid generator and the flow solver. The code uses the coordinates of an initial grid and the flow solution interpolated onto the new grid. MAG3D uses a numerical mapping and potential theory to modify the grid distribution based on properties of the flow solution on the initial grid. The adaptation technique is discussed, and the capability of MAG3D is demonstrated with several internal flow examples. Advantages of using solution-adaptive grids are also shown by comparing flow solutions on adaptive grids with those on initial grids.

Lee, K. D.↗
NASA NTRS1995

Three-dimensional unstructured method for flows past bodies in 6-DOF relative motion

A three dimensional, unstructured-mesh methodology was developed to simulate unsteady flows past bodies in relative motion, where the trajectory was determined from the instantaneous aerodynamics. The method coupled the equations of fluid flow and those of rigid-body dynamics, and captured the time-dependent interference between stationary and moving boundaries. The unsteady, compressible Euler equations were solved on dynamic, unstructured meshes by an explicit, finite-volume, upwind method. The grid adaptation was performed within a window placed around the moving body. The Euler equations of dynamics were solved by a Runge-Kutta integration scheme. The flow solver and the adaptation scheme were validated by simulating the transonic, unsteady flow around a wing undergoing a forced, periodic pitching motion, then comparing the results with the experimental data. To validate the trajectory code, the six-degrees-of-freedom (DOF) motion of a store separating from a wing was computed using the experimentally determined force and moment fields, then comparing with an independently generated trajectory. Finally, the overall methodology was demonstrated by simulating the unsteady flowfield and the trajectory of a store dropped from a wing. The methodology, its computational cost notwithstanding, has proven to be accurate, automated, easy for dynamic gridding, and relatively efficient for the required man-hours.

Singh, K. P.↗
NASA NTRS1997

Parallelization of the Implicit RPLUS Algorithm

The multiblock reacting Navier-Stokes flow solver RPLUS2D was modified for parallel implementation. Results for non-reacting flow calculations of this code indicate parallelization efficiencies greater than 84% are possible for a typical test problem. Results tend to improve as the size of the problem increases. The convergence rate of the scheme is degraded slightly when additional artificial block boundaries are included for the purpose of parallelization. However, this degradation virtually disappears if the solution is converged near to machine zero. Recommendations are made for further code improvements to increase efficiency, correct bugs in the original version, and study decomposition effectiveness.

Orkwis, Paul D.↗