Fusion of MISR Stereo Cloud Heights and Terra‐MODIS Thermal Infrared Radiances to Estimate Two‐Layered Cloud Properties
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
WINDPROF provides 10-minute wind and turbulence profiles that integrate a scanning Doppler lidar, a profiling Doppler lidar, and two sonic anemometers across Northeast U.S. coastal and offshore sites during the WFIP3 campaign. Variables include wind speed, wind direction, vertical velocity, turbulence intensity, and turbulent kinetic energy, each with per-instrument quality control and inter-instrument agreement validation. Profiles are mapped to a standardized height grid – dedicated near-surface levels at the sonic measurement heights (4 m and 10 m AGL), 20 m spacing to 100 m, and 30 m spacing above – and carry component and derived uncertainty estimates. Heights are reported above ground level; the site's ground elevation is stored separately. The Cape Cod dataset covers 1 February 2024 – 6 September 2025.
In the double pulsar system PSR J0737-3039A/B, the strong wind produced by pulsar A distorts the magnetosphere of pulsar B. The influence of these distortions on the orbital-dependent emission properties of pulsar B can be used to determine the location of the coherent radio emission generation region in the pulsar magnetosphere. Using a model of the wind-distorted magnetosphere of pulsar B and the well-defined geometrical parameters of the system, we determine the minimum emission height to be {approx}20R{sub NS} in the two bright orbital longitude regions. We can determine the maximum emission height by accounting for the amount of deflection of the polar field line with respect to the magnetic axis using the analytical magnetic reconnection model of Dungey and the semi-empirical numerical model of Tsyganenko. Both of these models estimate the maximum emission height to be {approx}2500R{sub NS}. The minimum and maximum emission heights we calculate are consistent with those estimated for normal isolated pulsars.
Abstract Estimating stature from skeletonized remains is one of the essential parameters in the development of a biological profile. A new procedure for determining skeletal height ( SKH ) incorporating the vertical space height ( VSH ) from the anterior margin of the sacral promontory to the superior margins of the acetabulae for use in the anatomical method of stature estimation is introduced. Regression equations for stature estimation were generated from measurements of 38 American males of European ancestry from the William M. Bass Donated Skeletal Collection. The modification to the procedure results in a SKH that is highly correlated with stature ( r = 0.925–0.948). Stature estimates have low standard errors of the estimate ranging from 21.79 to 25.95 mm, biases from to 0.50 to 0.94 mm, and accuracy rates from 17.71 mm to 19.45 mm. The procedure for determining the VSH , which replaces “S1 height” in traditional anatomical method models, is a key improvement to the method.
The paper presents a method for retrieving single field of view tropospheric temperature profiles directly from cloud-contaminated radiance data through the use of auxiliary data such as observed shelter temperatures and estimated cloud-top height. A model was formulated to calculate cloud parameters for use with the radiative transport equation at an estimated cloud-top level. The cloud and temperature data are used in conjunction with real and simulated radiance data from NOAA satellites.
A spherical harmonic model of the sea surface topography complete to degree and order 10 and a model of the earth's geopotential field complete to degree and order 50 have been obtained in a simultaneous solution using Geosat altimeter data and tracking data from 14 different satellites. The sea surface topography model compares well with oceanographic models computed using hydrographic data and ship drift data. Currently, errors in the estimated gravity field model limit the determination of the spherical harmonic coefficients of the general ocean circulation to degrees 10 and lower, corresponding to a minimum wavelength of 4000 km. Error analysis indicates that the correlation between the geoid and the sea surface topography model is less than 0.2, indicating good separation of the geoid and the sea surface topography at wavelengths of 4000 km or longer. Estimates of the scale factor for the significant wave height (H1/3), which is used to compute the electromagnetic bias correction and the bias for the Geosat altimeter, are obtained. The estimate of the H1/3 correction is 3.6 + or - 1.5 percent, and the height bias estimate is zero.
An iterative method is presented to retrieve single field of view (FOV) tropospheric temperature profiles directly from cloud-contaminated radiance data. A well-defined temperature profile may be calculated from the radiative transfer equation (RTE) for a partly cloudy atmosphere when the average fractional cloud amount and cloud-top height for the FOV are known. A cloud model is formulated to calculate the fractional cloud amount from an estimated cloud-top height. The method is then examined through use of simulated radiance data calculated through vertical integration of the RTE for a partly cloudy atmosphere using known values of cloud-top height(s) and fractional cloud amount(s). Temperature profiles are retrieved from the simulated data assuming various errors in the cloud parameters. Temperature profiles are retrieved from NOAA-4 satellite-measured radiance data obtained over an area dominated by an active cold front and with considerable cloud cover and compared with radiosonde data. The effects of using various guessed profiles and the number of iterations are considered.
Hemispherical dispersion of the SO2 cloud from the August 2008 Kasatochi eruption is analyzed using satellite data from the Ozone Monitoring Instrument (OMI) and the Goddard Trajectory Model (GTM). The operational OMI retrievals underestimate the total SO2 mass by 20-30% on 8-11 August, as compared with more accurate offline Extended Iterative Spectral Fit (EISF) retrievals, but the error decreases with time due to plume dispersion and a drop in peak SO2 column densities. The GTM runs were initialized with and compared to the operational OMI SO2 data during early plume dispersion to constrain SO2 plume heights and eruption times. The most probable SO2 heights during initial dispersion are estimated to be 10-12 km, in agreement with direct height retrievals using EISF algorithm and IR measurements. Using these height constraints a forward GTM run was initialized on 11 August to compare with the month-long Kasatochi SO2 cloud dispersion patterns. Predicted volcanic cloud locations generally agree with OMI observations, although some discrepancies were observed. Operational OMI SO2 burdens were refined using GTM-predicted mass-weighted probability density height distributions. The total refined SO2 mass was integrated over the Northern Hemisphere to place empirical constraints on the SO2 chemical decay rate. The resulting lower limit of the Kasatochi SO2 e-folding time is approx.8-9 days. Extrapolation of the exponential decay back in time yields an initial erupted SO2 mass of approx.2.2 Tg on 8 August, twice as much as the measured mass on that day.
We present a sample of 17 newly discovered ultracool dwarf candidates later than {approx}M8, drawn from 231.90 arcmin{sup 2} of Hubble Space Telescope Wide Field Camera 3 infrared imaging. By comparing the observed number counts for 17.5 {<=} J{sub 125} {<=} 25.5 AB mag to an exponential disk model, we estimate a vertical scale height of z{sub scl} = 290 {+-} 25 (random) {+-} 31 (systematic) pc for a binarity fraction of f{sub b} = 0. While our estimate is roughly consistent with published results, we suggest that the differences can be attributed to sample properties, with the present sample containing far more substellar objects than previous work. We predict the object counts should peak at J{sub 125} {approx} 24 AB mag due to the exponentially declining number density at the edge of the disk. We conclude by arguing that trend in scale height with spectral type may breakdown for brown dwarfs since they do not settle onto the main sequence.
Gap phase dynamics are the dominant mode of forest turnover in tropical forests. However, gap processes are infrequently studied at the landscape scale. Airborne lidar data offer detailed information on three-dimensional forest structure, providing a means to characterize fine-scale (1 m) processes in tropical forests over large areas. Lidar-based estimates of forest structure (top down) differ from traditional field measurements (bottom up), and necessitate clear-cut definitions unencumbered by the wisdom of a field observer. We offer a new definition of a forest gap that is driven by forest dynamics and consistent with precise ranging measurements from airborne lidar data and tall, multi-layered tropical forest structure. We used 1000 ha of multi-temporal lidar data (2008, 2012) at two sites, the Tapajos National Forest and Ducke Reserve, to study gap dynamics in the Brazilian Amazon. Here, we identified dynamic gaps as contiguous areas of significant growth, that correspond to areas greater than 10 sq m, with height less than 10 m. Applying the dynamic definition at both sites, we found over twice as much area in gap at Tapajos National Forest (4.8%) as compared to Ducke Reserve (2.0%). On average, gaps were smaller at Ducke Reserve and closed slightly more rapidly, with estimated height gains of 1.2 m y-1 versus 1.1 m y-1 at Tapajos. At the Tapajos site, height growth in gap centers was greater than the average height gain in gaps (1.3 m y-1 versus 1.1 m y-1). Rates of height growth between lidar acquisitions reflect the interplay between gap edge mortality, horizontal ingrowth and gap size at the two sites. We estimated that approximately 10% of gap area closed via horizontal ingrowth at Ducke Reserve as opposed to 6% at Tapajos National Forest. Height loss (interpreted as repeat damage and/or mortality) and horizontal ingrowth accounted for similar proportions of gap area at Ducke Reserve (13% and 10%, respectively). At Tapajos, height loss had a much stronger signal (23% versus 6%) within gaps. Both sites demonstrate limited gap contagiousness defined by an increase in the likelihood of mortality in the immediate vicinity ((is) approximately 6 m) of existing gaps.
The properties of adiabatic and linear internal gravity waves propagating in a solar wind model are discussed, using nonlinearity criteria unique to gravity waves to estimate wave-breaking heights. The results are used to deduce information on the possible role of gravity waves in the chromospheric energy balance. Maximum vertical velocity amplitudes for gravity waves are estimated to be on the order of 2 km/sec or less, and maximum horizontal velocity amplitudes are less than 6 km/sec, with temperature perturbations as large as 1000-2000 K. It is also estimated that gravity waves with an incident energy flux of one million ergs/sq cm-sec can propagate upward to a maximum height of 900-1000 km above the visible surface before nonlinearities lead to wave breaking, while those with an energy flux of 100,000 ergs/sq cm-sec can reach maximum heights of 1400-1600 km.
I use crater dimensions to estimate the yield of the August 4th, 2020 Beirut explosion to be equivalent to approximately 1.4 kilotons of TNT with a lower bound of about 0.7 kilotons. Based on the amount of ammonium nitrate reported to have been stored at the Beirut harbor, I assume an upper bound for the yield of 2.75 kilotons. However, it is highly likely that the yield was less than 2.75 kilotons, since reported values for TNT equivalence of ammonium nitrate are typically much less than one hundred percent. The crater-size based yield estimates are based on crater radius estimates from satellite imagery and empirical curves and data for scaled crater radius from past chemical and nuclear explosions. I present evidence that suggests that the relatively large crater radius is due to a high degree of coupling of shock wave energy to the surrounding medium and a reduction of the effective stress because of a high level of saturation of the geologic media beneath the explosion. I provide yield estimates based on seismic body-wave magnitude and crater depth as corroborating evidence. I compare preliminary estimates for the maximum debris cloud height, based on cell phone videos/images, with predicted maximum heights for this yield range from empirical formulas and numerical cloud-rise models. Based on a preliminary analysis of cell phone footage, the observed maximum cloud height appears to be approximately 1600 m. This is much lower than that predicted using standard empirical formulas and buoyant cloud rise models. I present results from a modified buoyant cloud rise model that more accurately predicts the maximum cloud height by allowing for the inclusion of a fixed amount of air and/or water into the fireball at the start of cloud rise. The amount of mass that needs to be added at the start, to reproduce the observed maximum cloud height, is relatively small compared to the total mass entrained during cloud rise. A much greater amount of dry air or debris is required, relative to water, for an equivalent reduction in maximum cloud height. The ammonium nitrate is one possible source for water in the fireball since it was being stored in a very humid environment and ammonium nitrate is known to be hygroscopic. The ground beneath the explosion, especially if it were saturated, and the nearby harbor could also have been sources for water or debris in the fireball.
The probable mechanism underlying the development of boundary layer roll circulations are studied using wind and temperature profiles measured by the National Center for Atmospheric Research (NCAR) Electra during the stratocumulus phase of the First ISCCP Regional Experiment (FIRE). The expected, or preferred, roll orientations, horizontal wavelengths, and propagation periods are determined by finding the minimum values of the dynamic and thermodynamic forcing parameters, which here are the eddy Reynolds number (Re) and moist Rayleigh number (Ra sub m). These minimum values depend on the height z sub T of the capping temperature inversion and on the values of the Fourier coefficients of the background height-dependent vector wind profile. As input to our nonlinear spectral model, descent and ascent runs by the Electra provide for initial estimates of the inversion height and the wind profiles. In the first phase of the investigation presented here, a mechanism is said to be a probable contributor to the development of roll circulations within the stratocumulus-topped boundary layer if the modeled roll orientation and wavelengths agree with their observed values. Preliminary results using the 14-coefficient model of Haack-Hirschberg (1988) are discussed for the 7 July 1987 Electra Mission 188-A (Flight 5). This mission was flown across a sharp cloud boundary that was within a LANDSAT/SPOT scene. The stratocumulus deck was relatively solid in the eastern part of the scene, while there was a rapid decrease in cloud cover to scattered cumulus clouds aligned in streets to the west. These cloud streets were oriented nearly parallel to the mean wind direction in the layer, which was approximately 340 degrees. The hypothesis that roll circulations occurred in both the relatively clear and the cloudy regions is investigated using as model input a descent profile obtained in the relatively clear air and an ascent profile obtained in the cloudy air. Initial results for the clear air case are that the pure inflection point mode is not possible and the pure thermal mode was oriented 35 degrees to the right of the mean wind direction. The origin of this unacceptably large discrepancy between the observed and modeled results will be investigated further and the conclusions reported at the next FIRE workshop.
An updated version of the Met Office Hadley Centre's monthly night marine air temperature data set is presented. It is available on a 5° latitude-longitude grid from 1880 as anomalies relative to 1961–1990 calendar-monthly climatological average night marine air temperature (NMAT). Adjustments are made for changes in observation height; these depend on estimates of the stability of the near surface atmospheric boundary layer. In previous versions of the data set, ad hoc adjustments were also made for three periods and regions where poor observational practice was prevalent. These adjustments are re-examined. Estimates of uncertainty are calculated for every grid box and result from measurement errors, uncertainty in adjustments applied to the observations, uncertainty in the measurement height, and under-sampling. The new data set is a clear improvement over previous versions in terms of coverage because of the recent digitization of historical observations from ships' logbooks. However, the periods prior to about 1890 and around World War II remain particularly uncertain, and sampling is still sparse in some regions in other periods. A further improvement is the availability of uncertainty estimates for every grid box and every month. Previous versions required adjustments that were dependent on contemporary measurements of sea surface temperature (SST); to avoid these, the new data set starts in 1880 rather than 1856. Overall agreement with variations of SST is better for the updated data set than for previous versions, supporting existing estimates of global warming and increasing confidence in the global record of temperature variability and change.
Perched-water conditions have been observed in the vadose zone above a fine-grained zone that is located just a few meters above the water table beneath the B-complex at the Hanford Site. The perched water, containing elevated concentrations of uranium and technetium-99, is important to consider in evaluating the future flux of contaminated water into the groundwater. A study was conducted to examine the perched-water conditions and quantitatively evaluate 1) factors that control perching behavior, 2) contaminant flux toward groundwater, and, 3) associated groundwater impact. Based on the current vertical transport pathways and large areal extent of the perched system, the evaluation was conducted using a one-dimensional (1-D) analysis. Steady-state scoping calculations showed that the perching-layer hydraulic conductivity is likely to be up to two orders of magnitude less than the base case value obtained from Hanford site literature. Numerical flow and transport simulations provided both steady-state and transient system estimates of water and contaminant behavior and were used to further refine the range of conditions consistent with current observations of perched water height and to provide estimates of future water and contaminant flux to groundwater. With a recharge rate of 6 cm/yr, representative of current disturbed surface conditions, contaminant flux from the perched water occurs over a time interval of tens of years. However, if the recharge rate is 0.35 cm/yr, representative of returning recharge to pre-Hanford Site levels, the contaminant flux into the groundwater is spread over hundreds of years. It was also demonstrated that removal of perched water by pumping would reduce the flux of water (and associated contaminants) to the groundwater, thereby impacting the long-term rate of contaminant movement to the groundwater.
Atmospheric aerosols and clouds play an important role in climate by directly scattering and absorbing sunlight. Aerosol-cloud interactions modify the particle properties causing indirect effects, alter aerosol deposition and rainfall, and contribute substantially to the uncertainties in predicting climate effects. Aerosols also affect air quality and both constituents modulate boundary layer dynamics to a certain extent, in turn impacting aerosol transport and aerosol-cloud interactions. The spatiotemporal distribution of aerosol and cloud layers is thus important, and lidar remains the primary instrument for determining the vertical distribution of aerosols and thin clouds. Lidar still provides important information for opaque cloud layers by determining base heights. Combined lidar and radar data provide a comprehensive coverage of aerosol and cloud vertical distributions, and thus locations where and when they interact. Lidar data provide a means of constraining column aerosol loading observations (e.g. AOD) to vertical extents. In addition, lidar has proven effective at determining a proxy for boundary layer height by examining aerosol gradients and/or cloud base heights in lidar profiles. Polarized lidars provide additional information on particle shape, allowing estimates of cloud phase and separation of dust or smoke from sulfate and sea salt aerosols. Given the importance of lidar observations and a critical maturation in technology and retrieval techniques, several organizations began to build operational lidar networks around 2000. The European Aerosol Research Lidar Network (EARLINET) was started as a research focused network of advanced lidars across Europe. The Asian Dust Lidar Network (ADNET) was also developed as a regional network providing lidar profiles of dust and pollution across Eastern Asia. In the US, the NASA Micro Pulse Lidar Network (MPLNET) was created to provide global lidar profiling at key sites in the NASA Aerosol Robotic Network (AERONET). The Network for the Detection of Atmospheric Composition Change (NDACC) pre-dates these networks and many sites have lidar, but it is not strictly a lidar network and at the time focused less on the lower troposphere. Finally, there were already existing ceilometer networks operated by various meteorological agencies, but in particular here in the US the profile data has not been available. The ceilometer networks were used to provide only clouds base heights and estimates of PBL height. Thus, the distinguishing feature between lidar and ceilometer networks was historically the ability to actually provide profile information (in addition to differences in wavelength, and advanced retrievals such as the raman technique). As time progressed, each lidar network matured and developed more operational capabilities and data sets, coupled with viable data centers providing DAAC services and access to near-real-time (NRT) data. In 2008 under WMO guidance, the Global Atmospheric Watch (GAW) Aerosol Lidar Observation Network (GALION) was formed as a global network made up of the existing lidar networks. The goal was to share information, best practices, and develop frameworks and techniques for quality data. GALION grew to include several other regional lidar networks and this has led to a vast increase in quality lidar sites worldwide.
The consistent wind resource in the Great Plains of North America has encouraged the development of wind energy facilities across this region. In the Texas Panhandle, a high quality wind resource is only one factor that has led to the expansion of wind energy development. Other factors include federal tax incentives and the availability of subsidies. Moreover, the State Renewable Portfolio Standards (RPS), mandating production of 10,000 mega-watts of renewable energy in the state by 2025, has contributed to an amicable regulatory and permitting environment (State Energy Conservation Office 2010). Considering the current rate of development, the RPS will be met in coming years (American Wind Energy Association 2011) and the rate of development is likely to continue. To meet increased energy demands in the face of a chronically constrained transmission grid, Texas has developed a comprehensive plan that organizes and prioritizes new transmission systems in high quality wind resource areas called Competitive Renewable Energy Zones (CREZ). The CREZ plan provides developers a solution to transmission constraints and unlocks large areas of undeveloped wind resource areas. In the northern Texas panhandle, there are two CREZs that are classified Class 3 wind (Class 5 is the highest) and range from 862,725 to 1,772,328 ha in size (Public Utility Commission of Texas 2008). Grassland bird populations have declined more than any other bird group in North America (Peterjohn and Sauer 1999, Sauer et al. 2004). Loss of grassland habitat from agricultural development has been the greatest contributor to the decline of grassland bird populations, but development of non-renewable (i.e., oil, coal, and gas) and renewable energy (i.e., wind, solar, biomass, and geothermal) sources have contributed to the decline as well (Pimentel et al. 2002, Maybe and Paul 2007). The effects of wind energy development on declining grassland bird populations has become an area of extensive research, as we attempt to understand and minimize potential impacts of a growing energy sector on declining bird populations. Based on data from post-construction fatality surveys, two grassland bird groups have been the specific focus of research, passerines (songbird guild) and raptors (birds of prey). The effects of wind energy development on these two groups of birds, both of conservation concern, have been examined over the last decade. The primary focus of this research has been on mortality resulting from collision with wind turbines (Kuvlesky et al. 2007). Most studies just quantify post-construction fatality levels (e.g., Erickson et al. 2002) while very few studies provide a comparison of bird populations prior to development through a Before-After-Control-Impact (BACI) study design. Before-After-Control-Impact studies provide powerful evidence of avian/wind energy relationships (Anderson et al. 1999). Despite repeated urgency on conducting these types of studies (Anderson et al. 1999, Madders and Whitfield 2006, Kuvelsky et al. 2007), few have been conducted in North America. Although several European researchers (Larsson 1994, de Lucas et al. 2007) have used BACI designs to examine whether wind facilities modified raptor behavior, there is a scarcity of BACI data relating to North America grassland ecosystems that examine avian-wind energy relationships. There are less than a handful of studies in the entire United States, let alone the southern short grass prairie ecosystem, that incorporate preconstruction data to form the baseline for post-construction impact estimates (Johnson et al. 2000, Erickson et al. 2002). Although declines in grassland bird populations are well-documented (Peterjohn and Sauer 1999, Sauer et al. 2004), the causal mechanisms affecting the decline of grassland birds with increasing wind energy development in the southern short grass prairie are not well-understood (Kuvlesky et al. 2007, Maybe and Paul 2007). Several factors may potentially affect the bird population when wind turbines are constructed in areas with high bird densities (de Lucas et al. 2007). Habitat fragmentation, noise from turbines, physical movement of turbine blades, and increased vehicle traffic have been suggested as causes of decreased density of nesting grassland birds in Minnesota (Leddy et al. 1999), Oklahoma (O’Connell and Piorkowski 2006), and South Dakota (Shaffer and Johnson 2008). Similarly, constructing turbines in areas where bird flight patterns place them at similar heights of turbine blades increases the potential for bird collisions (Johnson et al. 2000, Hoover 2002). Raptor fatalities have been associated with topographic features such as ridges, saddles and rims where birds use updrafts from prevailing winds (Erickson et al. 2000, Johnson et al. 2000, Barrios and Rodriquez 2004, Hoover and Morrison 2005). Thus, wind energy development can result in indirect (e.g., habitat avoidance, decreased nest success) and direct (e.g., collision fatalities) impacts to bird populations (Anderson et al. 1999). Directly quantifying the level of potential impacts (e.g., estimated fatalities/mega-watthour) from wind energy development is beyond the scope of this study. Instead, I aim to quantify density, occupancy and flight behavior for the two bird groups mentioned earlier: obligate grassland songbirds and raptors, respectively, predict where impacts may occur, and provide management recommendations to minimize potential impacts. The United States Department of Energy (DOE), through the Office of Energy Efficiency and Renewable Energy Allocation, contracted Texas Tech University to investigate grassland bird patterns of occurrence in the anticipated CREZ in support of DOE’s 20% Wind Energy by 2030 initiative. In cooperation with Iberdrola Renewables, Inc., studies initiated by Wulff (2010) at Texas Tech University were continued at an area proposed for wind energy development and a separate reference site unassociated with wind energy development. I focused on four primary objectives and this thesis is accordingly organized in four separate chapters that address grassland bird density, grassland bird occupancy, raptor flight patterns, and finally I summarize species diversity and composition. The following chapters use formatting from the Journal of Wildlife Management guidelines (Block et al. 2011) with modifications as required by the Texas Tech University Graduate School. 1) I estimate pre-construction bird density patterns using methods that adjust for imperfect detection. I used a distance sampling protocol that effectively accounts for incomplete detection in the field where birds are present but not detected (Buckland et al. 2001). I improved density estimates with hierarchical distance sampling models, a modeling technique that effectively incorporates the detection process with environmental covariates that further influence bird density (Royle et al. 2004, Royle and Dorazio 2008). Covariates included road density and current oil and gas infrastructure to determine the relationship between existing energy development and bird density patterns. Further, I used remote sensing techniques and vegetation field data to investigate how landcover characteristics influenced bird density patterns. I focused species-specific analyses on obligate grassland birds with >70 detections per season namely grasshopper sparrow (Ammodramus savannarum) and horned lark (Eremophila alpestris). Chapter II focuses on hierarchical models that model and describe relationships between grassland bird density and anthropogenic and landscape features. 2) A large number of bird detections (>70) are needed to estimate density using distance sampling and collection of such quantity are often not feasible, particularly for cryptic species or species that naturally occur at low densities (Buckland et al. 2001). Occupancy models operate with far fewer data and are often used as a surrogate for bird abundance when there are fewer detections (MacKenzie and Nichols 2004). I used occupancy models that allow for the possibility of imperfect detection and species abundance to improve estimates of occurrence probability (Royal 2004). I focused species-specific analyses on grassland birds with few detections: Cassin’s sparrow (Peucaea cassinii), eastern meadowlark (Sturnella magna), and upland sandpiper (Bartramia longicauda). Chapter III uses a multi-season dynamic site occupancy model that incorporates bird abundance to better estimate occurrence probability. 3) When I considered the topographic relief of the study sites, the proposed design of the wind facility and its location within the central U.S. migratory corridor, I expanded the study to investigate raptor abundance and flight behavior (Hoover 2002, Miller 2008). I developed a new survey technique that improved the accuracy of raptor flight height estimates and compared seasonal counts and flight heights at the plateau rim and areas further inland. I used counts and flight behaviors to calculate species-specific collision risk indices for raptors based on topographic features. I focused species-specific analyses on raptors with the highest counts: American kestrel (Falco sparverius), northern harrier (Circus cyaneus), red-tailed hawk (Buteo jamaicensis), Swainson’s hawk (Buteo swainsoni), and turkey vulture (Cathartes aura). Chapter IV describes patterns of seasonal raptor abundance and flight behavior and how topography modulates collision risk with proposed wind energy turbines. 4) Finally, for completeness, in Chapter V I summarize morning point count data for all species and provide estimates of relative composition and species diversity with the Shannon-Wiener Diversity Index (Shannon and Weaver 1949).
In the United States, corn ( Zea mays L.) stover has been targeted for second generation fuel production and other bio-products. Our objective was to characterize sugar and structural composition as a function of vertical distribution of corn stover (leaves and stalk) that was sampled at physiological maturity and about three weeks later from multiple USA locations. A small subset of samples was assessed for thermochemical composition. Concentrations of lignin, glucan, and xylan were about 10% greater at grain harvest than at physiological maturity, but harvestable biomass was about 25% less due to stalk breakage. Gross heating density above the ear averaged 16.3 ± 0.40 MJ kg⁻¹, but with an alkalinity measure of 0.83 g MJ⁻¹, slagging is likely to occur during gasification. Assuming a stover harvest height of 10 cm, the estimated ethanol yield would be >2500 L ha⁻¹, but it would be only 1000 L ha⁻¹ if stover harvest was restricted to the material from above the primary ear. Vertical composition of corn stover is relatively uniform; thus, decision on cutting height may be driven by agronomic, economic and environmental considerations.