SEARCH · Search NASA

Results for “hypersonic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1990

The application of active controls technology to a generic hypersonic aircraft configuration

Analytical methods are described for the prediction of aerothermoelastic stability of hypersonic aircraft including active control systems. Thermal loads due to aerodynamic heating were applied to the finite element model of the aircraft structure and the thermal effects on flutter were determined. An iterative static aeroelastic trim analysis procedure was developed including thermal effects. And active control technology was assessed for flutter suppression, ride quality improvement, and gust load alleviation to overcome any potential adverse aeroelastic stability or response problems due to aerodynamic heating. A generic hypersonic aircraft configuration was selected which incorporates wing flaps, ailerons, and all moveable fins to be used for active control purposes. The active control system would use onboard sensors in a feedback loop through the aircraft flight control computers to move the surfaces for improved structural dynamic response as the aircraft encounters atmospheric turbulence.

Gilbert, M. G.↗

NASA NTRS1990

Experimental aerothermodynamic research of hypersonic aircraft

Wind tunnel tests were conducted to establish a benchmark experimental data base for a genetic hypersonic aircraft vehicle. Comprehensive measurements were made at Mach 7 to give flow visualization, surface pressure, surface convective heat transfer, and flow field Pitot pressure for a delta platform all-body vehicle. The tests were conducted in the NASA/Ames 3.5-Foot Hypersonic Wind Tunnel at Reynolds numbers sufficient to give turbulent flow. Comparisons are made of the experimental results with computational solutions of the flow by an upwind parabolized Navier-Stokes code developed at Ames. Good agreement of experiment with solutions by the code is demonstrated.

Cleary, Joseph W.↗

NASA NTRS1989

Carbon-carbon composites: Emerging materials for hypersonic flight

An emerging class of high temperature materials called carbon-carbon composites are being developed to help make advanced aerospace flight become a reality. Because of the high temperature strength and low density of carbon-carbon composites, aerospace engineers would like to use these materials in even more advanced applications. One application of considerable interest is as the structure of the aerospace vehicle itself rather than simply as a protective heat shield as on Space Shuttle. But suitable forms of these materials have yet to be developed. If this development can be successfully accomplished, advanced aerospace vehicles such as the National Aero-Space Plane (NASP) and other hypersonic vehicles will be closer to becoming a reality. A brief definition is given of C-C composites. Fabrication problems and oxidation protection concepts are examined. Applications of C-C composites in the Space Shuttle and in advanced hypersonic vehicles as well as other applications are briefly discussed.

Maahs, Howard G.↗

NASA NTRS1990

An approximate method for calculating three-dimensional inviscid hypersonic flow fields

An approximate solution technique was developed for 3-D inviscid, hypersonic flows. The method employs Maslen's explicit pressure equation in addition to the assumption of approximate stream surfaces in the shock layer. This approximation represents a simplification to Maslen's asymmetric method. The present method presents a tractable procedure for computing the inviscid flow over 3-D surfaces at angle of attack. The solution procedure involves iteratively changing the shock shape in the subsonic-transonic region until the correct body shape is obtained. Beyond this region, the shock surface is determined using a marching procedure. Results are presented for a spherically blunted cone, paraboloid, and elliptic cone at angle of attack. The calculated surface pressures are compared with experimental data and finite difference solutions of the Euler equations. Shock shapes and profiles of pressure are also examined. Comparisons indicate the method adequately predicts shock layer properties on blunt bodies in hypersonic flow. The speed of the calculations makes the procedure attractive for engineering design applications.

Riley, Christopher J.↗

NASA NTRS1990

Multigrid for hypersonic inviscid flows

The use of multigrid methods to solve the Euler equations for hypersonic flow is discussed. The steady state equations are considered with a Runge-Kutta smoother based on the time accurate equations together with local time stepping and residual smoothing. The effect of the Runge-Kutta coefficients on the convergence rate was examined considering both damping characteristics and convection properties. The importance of boundary conditions on the convergence rate for hypersonic flow is discussed. Also of importance are the switch between the second and fourth difference viscosity. Solutions are given for flow around the bump in a channel and flow around a biconic section.

Decker, Naomi H.↗

NASA NTRS1989

Goertler vortices in supersonic and hypersonic boundary layers

The problem of Goertler vortices in compressible boundary layers over concave walls is considered. At O(1) wavelengths, the instability is governed by parabolic partial differential equations that are solved numerically to determine the effect of various initial conditions on the development of Goertler vortex instability in compressible boundary layers. The results show that both the velocity and temperature fluctuations may lead to a Goertler vortex. The vortex growth rates determined from the present method are found to differ somewhat from those given by a normal mode solution. At both the supersonic and hypersonic Mach numbers, cooling has a small destabilizing effect. In addition, the most unstable disturbances shift toward lower wavelengths because of thinning of the boundary layer. The results also show that compressibility has a stabilizing effect on the Goertler instability, while the effect of an adverse pressure gradient is found to be destabilizing. The behavior of the Goertler vortex structure with Mach number is also examined. At hypersonic Mach numbers, vortices are located near the edge of the boundary layer for adiabatic wall conditions. However, the entire boundary layer is affected when the wall is cooled.

Spall, R. E.↗

NASA NTRS1989

The critical role of aerodynamic heating effects in the design of hypersonic vehicles

Hypersonic vehicles operate in a hostile aerothermal environment, which has a significant impact on their aerothermostructural performance. Significant coupling occurs between the aerodynamic flow field, structural heat transfer, and structural response, creating a multidisciplinary interaction. The critical role of aerodynamic heating effects in the design of hypersonic vehicles is identified with an example of high localized heating on an engine-cowl leading edge. Recent advances is integrated fluid-thermal-structural finite-element analyses are presented.

Wieting, Allan R.↗

NASA NTRS1989

Euler and Navier-Stokes solutions for hypersonic flows

An upwind finite-element technique that uses cell-centered quantities and implicit and/or explicit time marching has been developed for computing hypersonic laminar viscous flows using adaptive unstructured grids in two and three dimensions. A perfect gas model as well as an equilibrium air model is implemented for solving high-speed flows. A first-order basic scheme and a higher-order flux-corrected transport (FCT) scheme have been implemented. This technique has been used to predict 'Type III and IV' shock interactions on a cylinder in two dimensions and a swept cylinder in three dimensions, with a view to determine the pressure and heating rate augmentation caused by an impinging shock on the leading edge of a cowl lip of an engine inlet. The predictions of wall pressure and heating rates compare very well with experimental data. The flow features are very distinctly captured with a sequence of adaptively-generated grids. Three-dimensional corner flow, typically encountered in engine inlets due to compression of the flow by ramps in the walls, is also modeled. This procedure is the first step in developing an integrated fluid, thermal, structural analysis capability for hypersonic flight vehicles like the National Aero-Space Plane.

Thareja, Rajiv R.↗

NASA NTRS1989

On the Goertler vortex instability mechanism at hypersonic speeds

The linear instability of the hypersonic boundary layer on a curved wall is considered. As a starting point, the viscosity of the fluid is taken to be a linear function of temperature and real-gas effects are ignored. It is shown that the flow is susceptible to Goertler vortices and that they are trapped in the logarithmically thin adjustment layer in which the temperature of the basic flow changes rapidly to its free stream value. The vortices decay exponentially in both directions away from this layer and are most unstable when their wavelength is comparable with the depth of the adjustment layer. The nonuniqueness of the neutral stability curve associated with incompressible Goertler vortices is shown to disappear at high Mach numbers if the appropriate 'fast' streamwise dependence of the instability is built into the disturbance flow structure. It is shown that in the hypersonic limit, wall-cooling affects the leading-order term in the expansion of the Goertler number which is independent of the wavenumber, and which is due to the curvature of the basic state but it has a negligible effect on the other terms which are dependent on the wavenumber.

Hall, Philip↗

NASA NTRS1990

Limitations of the method of characteristics when applied to axisymmetric hypersonic nozzle design

A design study of axisymmetric hypersonic wind tunnel nozzles was initiated by NASA Langley Research Center with the objective of improving the flow quality of their ground test facilities. Nozzles for Mach 6 air, Mach 13.5 nitrogen, and Mach 17 nitrogen were designed using the Method of Characteristics/Boundary Layer (MOC/BL) approach and were analyzed with a Navier-Stokes solver. Results of the analysis agreed well with design for the Mach 6 case, but revealed oblique shock waves of increasing strength originating from near the inflection point of the Mach 13.5 and Mach 17 nozzles. The findings indicate that the MOC/BL design method has a fundamental limitation that occurs at some Mach number between 6 an 13.5. In order to define the limitation more exactly and attempt to discover the cause, a parametric study of hypersonic ideal air nozzles designed with the current MOC/BL method was done. Results of this study indicate that, while stagnations conditions have a moderate affect on the upper limit of the method, the method fails at Mach numbers above 8.0.

Edwards, Anne C.↗

NASA NTRS1989

Effects of thermochemistry, nonequilibrium, and surface catalysis on the design of hypersonic vehicles

An account is given of the function of physical aspects of a gas on the characteristics of the flow and of the heating associated with hypersonic flight. At the high temperatures encountered, the thermal and chemical characteristics of the air in a hypersonic vehicle's shock layer are altered in ways which depend on the atomic and molecular structure of N and O and their ions; similar effects exist in scramjet propulsion systems. These properties in turn influence the character of shock waves and expansions, and hence the pressure, temperature, and velocity distributions. Transport properties affecting the boundary-layer structure will also affect heat flux and shear stress.

Scott, Carl D.↗

NASA NTRS1990

On the instability of hypersonic flow past a wedge

The instability of a compressible flow past a wedge is investigated in the hypersonic limit. Particular attention is paid to Tollmien-Schlichting waves governed by triple-deck theory though some discussion of inviscid modes is given. It is shown that the attached shock can have a significant effect on the growth rates of Tollmien-Schlichting waves. Moreover, the presence of the shock allows for more than one unstable Tollmien-Schlichting wave. Indeed an infinite discrete spectrum of unstable waves is induced by the shock, but these modes are unstable over relatively small but high frequency ranges. The shock is shown to have little effect on the inviscid modes considered by previous authors and an asymptotic description of inviscid modes in the hypersonic limit is given.

Cowley, Stephen↗

NASA NTRS1989

Interference effects on the hypersonic, rarefied flow about a flat plate

The Direct Simulatiaon Monte Carlo method is used to study the hypersonic, rarefied flow interference effects on a flat plate caused by nearby surfaces. Calculations focus on shock-boundary-layer and shock-lip interactions in hypersonic inlets. Results are presented for geometries consisting of a flat plate with different leading-edge shapes over a flat lower wall and a blunt-edge flat plate over a 5-degree wedge. The problems simulated correspond to a typical entry flight condition of 7.5 km/s at altitudes of 75 to 90 km. The results show increases in predicted local heating rates for shock-boundary-layer and shock-lip interactions that are quantitatively similar to those observed experimentally at much higher densities.

Wilmoth, Richard G.↗

NASA NTRS1990

Condensation in hypersonic nitrogen wind tunnels

Experimental observations and a theoretical model for the onset and disappearance of condensation are given for hypersonic flows of pure nitrogen at M = 10, 14 and 18. Measurements include Pitot pressures, static pressures and laser light scattering experiments. These measurements coupled with a theoretical model indicate a substantial non-equilibrium supercooling of the vapor phase beyond the saturation line. Typical results are presented with implications for the design of hypersonic wind tunnel nozzles.

Lederer, Melissa A.↗

NASA NTRS1990

Langley hypersonic aerodynamic/aerothermodynamic testing capabilities - Present and future

The Langley Hypersonic Facilities Complex consists of nine hypersonic, blowdown-to-vacuum wind tunnels that complement one another to provide a range of Mach number from 6 to 22, with Reynolds number from 0.03 to 40 million per foot and, most importantly for blunt configurations, a normal shock density ratio from 4 to 12. Presently, most of these facilities are receiving modifications and upgrades to hardware components and instrumentation to increase their capability, reliability, and productivity. Descriptions and capabilities of these facilities are presented along with measurement techniques routinely used. Future facility plans are discussed, with the focus on an Advanced Hypervelocity Aerophysics Facility being proposed for construction in the mid-1990s.

Miller, C. G.↗

NASA NTRS1990

Turbulence and shear stress measurements in hypersonic flow

An assessment has been made of the potential for hot wire and laser anemometer measurements of turbulent fluctuations in hypersonic flow fields. The results of laser velocimeter experiments conducted in two hypersonic wind tunnels are reported and comparisons made with previous hot wire turbulence measurements. A new concept for the measurement of the compressible shear stress terms which combines the attributes of both hot wire and laser anemometry is presented.

Owen, F. K.↗

NASA NTRS1990

Calculation of hypersonic forebody/inlet flow fields

The National Aero-Space Plane (NASP) is unique in its integration of the airframe and propulsion system. The performance of the NASP propulsion system (scramjet) is dependent upon the quality of the flow into the scramjet inlet. Hence, the calculation of the inlet flow field must be coupled to the forebody flow field for accurate performance predictions. The Compressible Navier-Stokes code has been extended to perform both external and internal hypersonic flow fields. Computations are presented that validate these changes and demonstrate the capability to perform coupled forebody/inlet computations for hypersonic flows.

Bennett, Bradford C.↗

NASA NTRS1990

Parametric study of an ODW scramaccelerator for hypersonic test facilities

A parametric study has been conducted for an oblique detonation-wave (ODW) 'scramaccelerator' suitable for projectile aerothermodynamics studies in real gas hypersonic test facilities. The results of the present analytical design evaluation indicate that an ODW scramaccelerator using conventional gaseous propellants can accelerate projectiles of 0.1 to 1000 kg masses to speeds in the 6-10 km/sec range. Potential applications for such an accelerator encompass a hypersonic ballistic test range, kinetic energy weapon accelerators, mass drivers to LEO, projectile terminal ballistics testing, projectile/target interaction studies, inertial welders, and shock compactors.

Humphrey, Joseph W.↗