Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Numerical investigations in three-dimensional internal flows

In order to develop an understanding of flow fields that exist in sidewall compression inlet models, an explicit, time-accurate full Navier-Stokes code was used to model them. Both laminar and turbulent boundary layers were numerically simulated. These simulations were examined as they were influenced by Mach number, changes in sidewall compression angle, hypersonic viscous interaction effects, and thick entering boundary layers. Cause and effect relationships were established. The numerical simulations were compared with the limited data available to aid in understanding both the simulations and the experiments.

Rose, William C.↗
NASA NTRS1990

Nonlinear response of unidirectional boron/aluminum

Experimental results obtained for unidirectional boron/aluminum subjected to combined loading using off-axis tension, compression and Iosipescu shear specimens are correlated with a nonlinear micromechanics model. It is illustrated that the nonlinear response in the principal material directions is markedly influenced by the different loading modes and different ratios of the applied stress components. The observed nonlinear response under pure and combined loading is discussed in terms of initial yielding, subsequent hardening, stress-interaction effects and unloading-reloading characteristics. The micromechanics model is based on the concept of a repeating unit cell representative of the composite-at-large and employs the unified theory of Bodner and Partom to model the inelastic response of the matrix. It is shown that the employed micromechanics model is sufficiently general to predict the observed nonlinear response of unidirectional boron/aluminum with good accuracy.

Pindera, M.-J.↗
NASA NTRS1991

Integrated Analysis Capability Program

Integrated Analysis Capability (IAC) software system intended to provide highly effective, interactive analysis tool for integrated design of large structures. Supports needs of engineering analysis groups concerned with interdisciplinary problems. Developed to serve as software interface between computer programs from fields of structures, thermodynamics, controls, and dynamics of systems on one hand and executive software system and data base on other hand to yield highly efficient multi-disciplinary system. Special attention given to such users' requirements as handling data and online assistance with operational features and ability to add new modules of user's choice at future date. Written in FORTRAN 77.

Vos, R. G.↗
NASA NTRS1990

Diurnal variation of marine stratocumulus over San Nicolas Island during the FIRE IFO

Preliminary analysis was made of data collected at San Nicolas Island during the Intensive Field Observation (IFO) phase of the First International Satellite Cloud Climatology Program's Regional Experiment (FIRE). Of particular interest was an examination of a distinct diurnal variation in the cloud properties, despite an apparent absence of diurnal forcing from the surface. Direct or indirect radiative modulation of such clouds, as proposed by Fravalo at el. (1981) and Turton and Nicholls (1987) indeed seems likely. Preliminary observational evidence for diurnal change in the marine stratocumulus adjacent to San Nicolas Island is presented. A comparison is then made between the observed behavior and predictions from theoretical models of the interactive effect of radiation on boundary layer clouds.

Davies, R.↗
NASA NTRS1990

Numerical investigations in three-dimensional internal flows

The application of the SCRAM2D code to investigating the flow fields that might be expected to occur in a representative Mach 10, two dimensional (ramp-compression) inlet is described. This Mach number allows the use of existing Navier-Stokes codes without the additional complexity of air chemistry and the associated large increases in computational time required to achieve numerical simulations of such flow fields. The CFD simulation consists of a two-dimensional inlet geometry that has an overall geometric turning of 36 degrees. The cowl for this inlet is assumed to be aligned with the oncoming freestream flow, turning the ramp flow field back parallel to the freestream, thus producing the overall 36 degree turning angle. The primary subject is the cowl shock wave-ramp boundary layer interaction effects. The results of numerical simulations carried out at the design Mach number of 10 and two other off-design Mach numbers, 7.2 and 5.0 are described.

Rose, William C.↗
NASA NTRS1992

Acquisition and production of skilled behavior in dynamic decision-making tasks

Currently, two main approaches exist for improving the human-machine interface component of a system in order to improve overall system performance - display enhancement and intelligent decision making. Discussed here are the characteristic issues of these two decision-making strategies. Differences in expert and novice decision making are described in order to help determine whether a particular strategy may be better for a particular type of user. Research is outlined to compare and contrast the two technologies, as well as to examine the interaction effects introduced by the different skill levels and the different methods for training operators.

Kirlik, Alex↗
NASA NTRS1992

Comparison of display enhancement with intelligent decision-aiding

Currently, two main approaches exist for improving the human-machine interface component of a system in order to improve overall system performance, display enhancement and intelligent decision aiding. Each of these two approaches has its own set of advantages and disadvantages, as well as introduce its own set of additional performance problems. These characteristics should help identify which types of problem situations and domains are better aided by which type of strategy. The characteristic issues are described of these two decision aiding strategies. Then differences in expert and novice decision making are described in order to help determine whether a particular strategy may be better for a particular type of user. Finally, research is outlined to compare and contrast the two technologies, as well as to examine the interaction effects introduced by the different skill levels and the different methods for training operators.

Kirlik, Alex↗
NASA NTRS1991

Requirements for psychological models to support design: Towards ecological task analysis

Cognitive engineering is largely concerned with creating environmental designs to support skillful and effective human activity. A set of necessary conditions are proposed for psychological models capable of supporting this enterprise. An analysis of the psychological nature of the design product is used to identify a set of constraints that models must meet if they can usefully guide design. It is concluded that cognitive engineering requires models with resources for describing the integrated human-environment system, and that these models must be capable of describing the activities underlying fluent and effective interaction. These features are required in order to be able to predict the cognitive activity that will be required given various design concepts, and to design systems that promote the acquisition of fluent, skilled behavior. These necessary conditions suggest that an ecological approach can provide valuable resources for psychological modeling to support design. Relying heavily on concepts from Brunswik's and Gibson's ecological theories, ecological task analysis is proposed as a framework in which to predict the types of cognitive activity required to achieve productive behavior, and to suggest how interfaces can be manipulated to alleviate certain types of cognitive demands. The framework is described in terms, and illustrated with an example from the previous research on modeling skilled human-environment interaction.

Kirlik, Alex↗
NASA NTRS1991

A study of rotor wake development and wake/body interactions in hover

Experiments were conducted to document the wake geometry and interactional effects between a hovering rotor and a body representing a simplified helicopter fuselage. The wide-field shadowgraph technique was used to visualize the rotor wake vortices and to obtain quantitative information on the wake trajectories, with and without the presence of the body. Particular attention was paid to visualizing and quantifying the wake geometry during the direct impingement of tip vortices on the body surface. The rotor performance with and without the fuselage is also discussed.

Bagai, A.↗
NASA NTRS1992

Ventral horn cell responses to spaceflight and hindlimb suspension

Ventral horn cells of the lumbosacral enlargement of the spinal cord were studied focusing on the succinate dehydrogenase (SDH) activity and cross-sectional area of the soma of ventral horn cells which were measured using a computer-aided image-processing system. The relationships between the soma size and SDH activities of lumber ventral horn cells after 14 days of spaceflight (Cosmos 2044) or of hindlimb suspension are considered. Three groups of rats under consideration include control, 14-day spaceflight, and 14-day hindlimb suspension. Data obtained indicate that, compared to the control group, the population distribution of SDH activities in the flight rats shifted toward higher activities, whereas in the suspended rats the distribution shifted toward lower activities. The interactive effects within individual cells showed that there was a higher percentage of small cells with high SDH activities in the flight than in the control or suspended rats. It is suggested that changes in ventral horn cells were due to factors other than simply the absence of weight support.

Jiang, Bian↗
NASA NTRS1993

FASTRAN II

Fatigue Crack Growth Structural Analysis (FASTRAN II) predicts growth of crack as function of history of cyclic loads until either crack attains desired size or failure occurs. Based on plasticity-induced closure behavior of cracks in metallic materials and accounts for such load-interaction effects as retardation and acceleration, under variable-amplitude loading. Written in standard FORTRAN 77. Other versions available upon request.

Newman, James C., Jr.↗
NASA NTRS1991

Control-structure interaction study for the Space Station solar dynamic power module

The authors investigate the feasibility of using a conventional PID (proportional plus integral plus derivative) controller design to perform the pointing and tracking functions for the Space Station Freedom solar dynamic power module. Using this simple controller design, the control/structure interaction effects were also studied without assuming frequency bandwidth separation. From the results, the feasibility of a simple solar dynamic control solution with a reduced-order model, which satisfies the basic system pointing and stability requirements, is suggested. However, the conventional control design approach is shown to be very much influenced by the order of reduction of the plant model, i.e., the number of the retained elastic modes from the full-order model. This suggests that, for complex large space structures, such as the Space Station Freedom solar dynamic, the conventional control system design methods may not be adequate.

Cheng, J.↗
NASA NTRS1992

Experimental study of rotor wake/body interactions in hover

Experiments were conducted to document the tip vortex geometries and interactional effects betwen a hovering rotor and a body representing a simplified helicopter fuselage. The wide-field shadowgraph technique was used to visualize the rotor tip vortices and to obtain quantitative information on the trajectories, with and without the presence of the body. It was found that the effects of the body caused significant changes to both the radial contraction and axial displacements of the tip vortices compared to the isolated case. Direct impingement of the tip vortices on the body surface was also observed, and found to cause large local wake deformations. The rotor performance was significantly affected by the body, producing a higher figure of merit relative to the isolated case.

Bagai, A.↗
NASA NTRS1991

The role of simulation in determining safe aircraft landing separation criteria

The role of flight simulation in determining safe aircraft landing separation criteria is reviewed and discussed. A broad conclusion is made that previous vortex-encounter simulations were useful for predicting the general response of an aircraft in the presence of trailing vortices and the type of separation criteria to emphasize. These simulations, however, were generally limited in scope and validation. Broad requirements for an accepted simulation methodology are presented. Key technological issues are addressed, including the addition of high-fidelity vortex models and aircraft/vortex interaction effects in the simulation, and validation of simulations with experimental data. Finally, results from a preliminary one-degree-of-freedom simulation are shown. These indicate that reduced landing spacings may be feasible and that current aircraft categorizations should be reviewed.

Stuever, Robert A.↗
NASA NTRS1991

Critical experiments of the self-consistent model for polycrystalline Hastelloy-X

A viscoplastic constitutive model is presented for the estimation of the overall mechanical response of Hastelloy-X polycrystalline metals from a knowledge of single crystal behavior. The behavior of polycrystal is derived from that of single crystals using a self-consistent formulation. The single crystal behavior which has been used was developed by summing postulated slip on crystallographic slip systems. The plasticity and creep are treated coupledly using unified viscoplastic model which includes the interaction effects between rapid and slow deformation at elevated temperature. The validity of the model is directly tested by experiments on Hastelloy-X in both single crystal and polycrystalline versions.

Shi, Shixiang↗
NASA NTRS1993

The viscoplastic behavior of Hastelloy-X single crystal

A viscoplastic constitutive model for simulating the behavior of Hastelloy-X single crystal material was derived based on crystallographic slip theory. To determine the appropriate constitutive model constants and to test the predictions of the model, tests on Hastelloy-X crystals were carried out, including the rate sensitivity, cyclic hardening, nonproportional hardening, relaxation, and strain rate dip tests. It was found necessary to include cube slip in the model in order to correlate the uniaxial behavior of the single crystal, to incorporate the interaction effects in both the hardening and the dynamic recovery evolution equations for the drag stress, and to successfully capture correct strain rate sensitivity under biaxial tension-torsion loading conditions.

Jordan, Eric H.↗
NASA NTRS1993

The small scale environment of low surface brightness disk galaxies

We use a sample of about 340 low surface brightness (LSB) disk galaxies with measured redshifts in combination with the Center for Astrophysics redshift survey to test the hypothesis that LSB galaxies have a deficit of nearby companion galaxies compared to high surface brightness (HSB) disk galaxies. We find a very strong statistical deficit of galaxies located within a projected radius of 0.5 Mpc and within a velocity of 500 km/s around LSB disk galaxies compared to HSB ones. Further, comparing LSB and HSB disk galaxies which are located in the same portion of the sky indicates that the average distance to the nearest neighbor is 1.7 times farther for LSB disk galaxies. A Komologorov-Smirnoff test rules out, at greater than the 99 percent confidence level, the hypothesis that the distribution of nearest-neighbor distances is the same for HSB and LSB disk galaxies. We speculate that LSB disk galaxies have relatively long formation time scales and therefore must form in relative isolation. In addition, the lack of tidal interactions over a Hubble time serves to suppress the overall star-formation rate as no external trigger is available to help clump the gas. The observed low surface densities of H I in combination with the low probability of tidal interactions effectively prevents these disk galaxies from evolving very rapidly.

Bothun, Gregory D.↗
NASA NTRS1952

A Low-speed Investigation of an Annular Transonic Air Inlet

Low-speed wind-tunnel tests were conducted as preliminary steps in the study of fuselage-air-inlet arrangements believed suitable for use at transonic speeds. The forward part of the model consisted of an NACA 1-85-050 cowling located at the base of the long protruding fuselage nose designed to maintain substream surface velocities everywhere ahead of the entrance and thereby to avoid or minimize adverse boundary-layer-shock interaction effects up to low supersonic speeds. Pressure-recovery and surface-pressure measurements are presented for the model with three fuselage nose shapes for ranges of angle of attack and inlet-velocity ratio useful for high-speed flight

AIR INLETS, SCOOPS↗