Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion adsorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ferromagnetic Atomic d ‐ p Orbital Hybridization for Promoting Al‐S Batteries

Rechargeable aluminum‐sulfur batteries (Al‐S) are emerging as a promising alternative energy storage system beyond lithium‐ion batteries due to their high energy density, abundant material resources, and economic efficiency. However, their practical application remains challenged by sluggish conversion kinetics, polysulfide shuttling, and low sulfur cathode utilization. While extensive studies have focused on enhancing polysulfide adsorption through catalytic strategies, the roles of electronic structure in dictating catalytic performance remain underexplored. Here, this work unveils the critical effect of unpaired electronic structure on the catalytic performance of single atom ferromagnetic transition metals through a systematic evaluation of three typical atomically dispersed ferromagnetic single atoms—Fe, Co, and Ni—supported on porous carbon (denoted as PC‐SAFAs). Comprehensive characterizations and density functional theory (DFT) calculations reveal that the PC‐SAFe catalysts, exhibiting the highest spin polarization arising from unpaired electrons, demonstrate the strongest interactions with polysulfide, thereby facilitating rapid and reversible polysulfide conversion reactions. Consequently, Al‐S batteries incorporating the optimized PC‐SAFe cathode achieve an impressive specific capacity of 508.8 mAh g −1 at 1.0 A g −1 after 500 cycles, along with much improved rate capability. In conclusion, this work provides a deeper understanding of the role of electronic structure in catalytic chemistry, and offers new insights for developing high‐performance Al‐S batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Suppressing the Shuttle Effects with FeCo/SPAN Cathodes and High-Concentration Electrolytes for High-Performance Lithium–Sulfur Batteries

The shuttle effects and the sluggish redox kinetics are two of the main challenges in lithium–sulfur (Li–S) batteries, which significantly reduce the capacity of the batteries and restrict their commercialization. Herein, FeCo/sulfurized polyacrylonitrile (SPAN) is synthesized as a cathode material via the electrospinning technique and a further heat treatment. Synchrotron X-ray absorption spectroscopy confirmed the existence of Fe–S/Fe and Co–S bonds in FeCo/SPAN, which benefit the adsorptive and catalytic activities toward lithium polysulfides (LiPSs). Here, we further investigated the effect of electrolyte concentration in inhibiting the shuttle of LiPSs in Li–S batteries. Small-angle X-ray scattering (SAXS) reveals that more contact ion pairs are formed and fewer free solvent molecules exist with the increase of the electrolyte concentration, which can inhibit the dissolution and shuttle of LiPSs. Finally, the batteries assembled with high-concentration electrolytes (3 M LiTFSI in DOL/DME) exhibit a higher specific capacity retention compared to those assembled with low-concentration electrolytes. This work enriches the route to prepare Li–S batteries with the rational design of cathode materials and electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2020

Electro-assisted regeneration of pH-sensitive ion exchangers for sustainable phosphate removal and recovery

Removal and recovery of phosphate from wastewater can minimize deleterious environmental impacts and supplement fertilizer supply. Hybrid anion exchangers (HAIX, with doped ferric oxide nanoparticles (FeOnp)) can remove phosphate from complex wastewaters and recover concentrated phosphate solutions. Here, we integrate HAIX with a weak acid cation exchanger (WAC) to enrich phosphate and calcium in mild regenerants and precipitate both elements for recovery. We demonstrated an electro-assisted regeneration approach to avoid strong acid and base input. Based on demonstrated pH sensitivities of both materials, electrochemically produced mild electrolytes (pH 3 and pH 11), which are 100–1000 times less concentrated than typical regenerants, preserved 80% WAC and 50% HAIX capacities over five batch adsorption-regeneration cycles. FeOnp in HAIX facilitated regeneration due to pH sensitivity and their likely distribution on the resin particle surface, which reduced intraparticle diffusion path length. In column tests, repeatable phosphate removal (> 95%) from synthetic wastewater (3 mg P/L) was achieved with 20 kWh/kg P specific energy consumption. After removal, a similar 50% HAIX regeneration efficiency as batch experiments was achieved. In spent regenerant, more than 95% phosphorus was recovered as hydroxyapatite. This novel approach enhances ion exchange by minimizing chemical inputs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural Implications of Interfacial Hydrogen Bonding in Hydrated Wyoming-Montmorillonite Clay

Montmorillonite (MMT) clay - a layered porous nanomaterial used as seals in engineered waste containment barriers for spent nuclear fuel - adopts discrete hydration/swelling states depending upon surrounding water and ion activities and confining pressure. The structure of nanoconfined water and charge-balancing counterions in the clay mineral interlayers dictate the swelling and mechanical behavior of MMT, so a molecular model for this clay with high structural fidelity is required to accurately predict the reliability of long-term nuclear waste storage. Here, we present a molecular model for MMT that is based on high resolution transmission electron microscopy of Wyoming-MMT single crystals. Imaging data unambiguously show a cis-vacant arrangement of structural hydroxyl groups in the octahedral sheet, whereas existing molecular models assume a centrosymmetric trans-vacant configuration for MMT. Furthermore, using atomistic simulations, we find that the cis-vacant arrangement of structural hydroxyl groups significantly affects the structure of adsorbed water yielding a larger population of hydrogen bonds with bridging oxygens on the tetrahedral sheet and weak hydrogen bonding between the hydroxyl groups in the octahedral sheet and water in the clay mineral interlayers. As a result, water adsorbed in the interlayer is more "ice-like", with stronger ordering and lower density, although the diffusivity of the interlayer species is not significantly diminished. Our improved structural model for MMT provides insight into the energetics of water adsorption, which ultimately dictates its pore- to macro-scale swelling, transport, and fracture properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Highly efficient removal and sequestration of Cr(VI) in confined MoS 2 interlayer Nanochannels: Performance and mechanism

Environmental contamination by Cr(VI) is of particular concern because of its severe toxicity and high mobility. In this study, we employed two-dimensional MoS 2 nanosheets in the removal of Cr(VI), with an emphasis on revealing the removal mechanisms, and how the compositional and structural uniqueness of 2D MoS 2 nanomaterials intrinsically impact the Cr removal efficiency. Through batch experiments with dispersed nanosheets, we found that MoS 2 nanosheets exhibited a high Cr(VI) removal capacity at ~1100 mg/g via a phase-dependent mechanism. Particularly, the 1T polymorph in the MoS 2 nanosheets removed Cr(VI) through a redox-reaction mechanism, which was different from the adsorptive removal of Cr(VI) by MoS 2 reported previously, highlighting the compositional effects on the removal mechanism and performance. More importantly, the reduced product Cr(III) was concurrently removed via precipitation and adsorption onto the MoS 2 nanosheets, which could avoid the additional pH-elevation step that is typically needed in the conventional treatment. The unique 2D flake-like structure of MoS 2 nanosheets enabled the formation of aligned and ion-accessible nanochannels, where Cr(VI) species were accommodated, reduced and sequestered. The irreversible shrinking of the nanochannels under drying modified the interior of the layer-stacked structure into confined compartments preventing the release and re-oxidation of the immobilized Cr(III). In conclusion, the compiled results highlight the effects of MoS 2 composition and structure on the Cr removal efficiency and mechanism, which has substantial implications on future studies tailoring these unique features of 2D nanomaterials for various remediation scenarios.

42 ENGINEERING↗
DOE OSTI2022

Synthesis of high-surface area tungstated zirconia by atomic layer deposition on mesoporous silica

Atomic layer deposition (ALD) was used to prepare ZrO 2 films on the surface of the mesoporous silica, SBA-15, and to modify the surface of these films with WO 3 in order to form tungstated zirconia. Adsorption-desorption isotherms, pore size distributions, and transmission electron microscopy demonstrated that the ALD synthesis produced zirconia films that were conformal to the SBA-15 pores. DRIFT spectroscopy of pyridine adsorbed on the tungstated-zirconia SBA-15 samples showed adsorbed pyridinium ions, confirming the presence of Brønsted-acid sites on this material, consistent with what has been reported for bulk tungstated zirconia. Here, the ALD-synthesized, tungstated-zirconia SBA-15 was also shown to be active in the acid-catalyzed H-D exchange between toluene and D 2 O.

Brønsted acid site↗
DOE OSTI2022

Multimodal study of the impact of stimulation pH on shale pore structure, with an emphasis on organics behavior in alkaline environments

The tight nature of shale formations calls for hydraulic fracturing techniques able of altering the pore architecture to facilitate the production of hydrocarbon resources. The composition, pH, salinity, density and chemistry of Hydraulic Fracturing Fluids (HFF) vary substantially depending on reservoir characteristics. pH is among the most important stimulation fluid properties, ranging from very acidic, for carbonate reservoirs, to basic, in the case of clay-rich formations. pH regulates what geochemical reactions take place between the stimulation fluid and shale, as well as pore architecture alteration. The dissolution of carbonates and pyrite, and the precipitation of common minerals such as barite, gypsum and iron oxides in acidic environments have been extensively documented. In contrast, alkali stimulation environments and the role of organic components have received less attention. This research provides insight into the role of both minerals and organic components during alkaline stimulation, and the resulting pore architecture alterations. Here, a set of reactive experiments are performed using three different shales, with varying organic matter (OM) content, at different pH (3, 6, 8, 10, 12). The analysis of pore architecture alteration induced by the reaction was performed via nitrogen (N2) gas adsorption and Time-Domain Nuclear Magnetic Resonance (TD-NMR). Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES) was used to measure the composition of the stimulation fluid post-reaction. The system with a larger impact on the pore architecture (pH 12) underwent a more extensive analysis through the application of Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) and x-ray Diffraction (XRD). Results show that mineral dissolution contributed to the creation of secondary porosity, mainly through dissolution of clays and silicates. We show that the abundance and distribution of organic matter both play a significant role in changes in pore architecture. Most samples showed an increase in inter-organic porosity, likely due to the organic acids within kerogen reacting with the stimulation fluid. Samples with a larger amount and more widespread distribution of organic matter show the most significant alterations. Finally, we also highlight the dissolution process of iron-rich minerals, including framboidal pyrite, as another important source of secondary porosity.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2020

The potential application of VS 2 as an electrode material for Mg ion battery: A DFT study

Herein, by means of first-principle calculations based on density functional theory (DFT), the electrochemical properties of monolayer VS 2 (M-VS 2 ), double-layer VS 2 (D-VS 2 ) and bulk VS 2 (B-VS 2 ) as electrode materials for Mg-ion batteries (MIBs) were comprehensively explored. The computation results reveal that Mg atom can strongly bind with the three different forms of VS 2 . All of the Mg adsorbed VS 2 systems demonstrate metallic characteristics, which indicates a good electronic conductivity. In addition, crystal orbital hamiltonian population shows that the stability of V-S bond is weakened after adsorption of Mg atom. The low diffusion barriers of Mg give rise to the high rate performance of VS 2 in MIBs. More interestingly, the three types of VS 2 display same storage ability for Mg cations, which can adsorb 0.5 Mg atoms for VS 2 , producing maximum theoretical capacity 233 mA h g -1 for MIBs. Furthermore, the average working voltages results suggest that M-VS 2 can be employed as anode materials, while D-VS 2 , B-VS 2 can be used as cathode materials for MIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Performance characterization of nanofiltration, reverse osmosis, and ion exchange technologies for acetic acid separation

A major obstacle to widespread implementation of bio-based fuels and chemicals is the lack of efficient and costeffective separation methods. To purify acetic acid produced by biochemical conversion of biomass via anaerobic digestion, this work employs two commonly used separation technologies: (1) ion-exchange (IX) resin and (2) pressure-driven membranes. This study tested five commercially available strong- and weak-base anion-exchange resins and five commercially available nanofiltration (NF) and reverse osmosis (RO) membranes. The pH of the feed solution significantly affected adsorption capacity. At pH 6.3, a strong-base IX resin (IRN-78) performed best (95.1% acetate removal). With strong-base IX resins, the Langmuir isotherm model fit well, whereas for weak-base IX resins, the Freundlich isotherm provided a better fit. A pseudo-second-order kinetic model fit well for both IRN-78 and IRA-67. Regarding membrane separation, RO (BW30XFR membrane) achieved the highest rejection (98.6% acetate rejection), whereas an NF membrane (NF*) achieved the best combination of permeate flux (105 L/(h∙m 2 )) and rejection (83.1% acetate rejection). For membrane performance, the experimental data were fit using the solution diffusion model. Increased pH in the feed solution lowered permeate flux but increased acetic acid rejection. Finally, then the acetic acid concentration in the feed solution increased, both permeate flux and acetic acid rejection decreased for membrane NF*.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Rational Construction of Porous Metal–Organic Frameworks for Uranium(VI) Extraction: The Strong Periodic Tendency with a Metal Node

Although metal-organic frameworks (MOFs) have been reported as important porous materials for the potential utility in metal ion separation, coordinating the functionality, structure, and component of MOFs remains a great challenge. Herein, a series of anionic rare earth MOFs (RE-MOFs) were synthesized via a solvothermal template reaction and for the first time explored for uranium(VI) capture from an acidic medium. The unusually high extraction capacity of UO2 2 + (e.g., 538 mg U per g of Y-MOF) was achieved through ion-exchange with the concomitant release of Me 2 NH 2 + , during which the uranium(VI) extraction in the series of isostructural RE-MOFs was found to be highly sensitive to the ionic radii of the metal nodes. That is, the uranium(VI) adsorption capacities continuously increased as the ionic radii decreased. Finally, in-depth mechanism insight was obtained from molecular dynamics simulations, suggesting that both the accessible pore volume of the MOFs and hydrogen-bonding interactions contribute to the strong periodic tendency of uranium(VI) extraction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exploring Electrocatalysis of Methane on Transition Metal Surfaces

Methane is a potent greenhouse gas because it has a heat-absorbing ability that is 20 times stronger than the better-known carbon dioxide. It is also the dominant component of nature gas (>70%). Its current greenhouse effect is only second to carbon dioxide largely because of its relatively low atmospheric concentration. Alarmingly, however, the latter has seen a 1.5-time increase since 1750, mainly due to anthropogenic livestock farming, coal and natural gas mining, and organic matter decomposing in waste landfills. Mitigating such a trend effectively and efficiently is therefore highly desirable and intensely sought for. This final technical report describes some exciting research progresses made over the last three years supported financially by the aforementioned award. The research conducted focused on exploring electrochemical direct methane to methanol (DMTM) conversion under mild conditions. The goal of research was to explore the possibility of developing potentially game-changing electrocatalysts and electrocatalysis that can convert methane directly to methanol in a most sustainable way for curbing its effect on global warming. Progress has been made in the following three directions. First, by adapting a hydrogen fuel-cell configuration that enables gaseous methane to be transported directly to the electrocatalyst surface, we have overcome the perennial difficulty in measuring activity of methane electro-oxidation at low temperature and ambient pressure that has prevented any meaningful studies of electrocatalysis of methane conversion thus far. Second, we have developed a novel and operational in situ electrochemical infrared (IR) spectral cell for studying electrocatalysis of direct methane to methanol conversion. This novel cell is also expected to alleviate the measuring difficulty caused by low solubility of methane in aqueous electrolyte and low sticking coefficient for methane adsorption onto transition metal surface. It will improve significantly the IR’s signal to noise ratio. Third, we have successfully synthesized nano-sizing copper (Cu) exchanged zeolite mordenite (Cu-ZMOR) and coated it with carbon that enabled electrochemical access to the encaged Cu ions. This opens a door to unravel the chemistry of Cu ions in catalyzing direct methane to methanol conversion under mild experimental conditions. Altogether, these progresses achieved have laid a solid foundation for further exploring electrocatalysis of direct methane to methanol conversion in general where there exists “a plenty of room” for new discoveries and developments.

03 NATURAL GAS↗
DOE OSTI2020

Water-promoted interfacial pathways in methane oxidation to methanol on a CeO 2 -Cu 2 O catalyst

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the pro­motion of this reaction by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from carbon monoxide and carbon dioxide to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to methane and oxygen led to surface methoxy groups and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations, which showed that water preferentially dissociates over the active cerium ions at the CeO 2 –Cu 2 O/Cu(111) interface. The adsorbed hydroxyl species blocked O-O bond cleavage that would dehydrogenate methoxy groups to carbon monoxide and carbon dioxide, and it directly converted this species to methanol, while oxygen reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding the role of water-soluble guar gum binder in reducing capacity fading and voltage decay of Li-rich cathode for Li-ion batteries

The practical application of high-capacity Li-rich cathode materials is hindered by capacity fading and voltage decay. The capacity fading and voltage decay could be effectively overcome by using water-soluble guar gum (GG) binder instead of traditional polyvinylidene fluoride (PVDF). However, the specific role of the GG binder is not clear yet, though the GG binder can significantly improve the electrochemical performance of Li-rich cathode. To understand the effect of GG binder on the morphology, microstructure of electrode and electrode/electrolyte interfaces, ex-situ scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray adsorption near edge spectroscopy (XANES), in-situ electrochemical impedance spectroscopy (EIS) were applied to comparatively study the charge-discharge processes of Li-rich Li 1.2 Ni 0.2 Mn 0.6 O 2 cathode when using GG and PVDF as binders. The results indicate that the GG binder can prevent electrode crack and active material loss, ascribing to the strong mechanical adhesion of GG binder with active material particles and current collector. It has found that the GG binder can also induce the formation of a uniform layer on Li 1.2 Ni 0.2 Mn 0.6 O 2 particles’ surface. As a consequence, both the electrolyte decomposition and the electrode corrosion were significantly inhibited. The strong chelation between Mn 2+ and polar OH group restrain Mn ion dissolution, which contributes to surface structural transformation mitigation. Here, our study reveals the role of water-soluble GG binder in reducing capacity fading and voltage decay of Li-rich material and is of great importance in design functional binders for high-performance Li-rich electrodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Electrical, thermal, and H 2 O and CO 2 poisoning behaviors of PrNi 0.5 Co 0.5 O 3-δ electrode for intermediate temperature protonic ceramic electrochemical cells

PrNi 0.5 Co 0.5 O 3-δ (PNC) exhibits adequate total electrical conductivity (~300 S/cm at 400–600 °C) and moisture has no significant effect on it. The thermal expansion coefficient of PNC is 17.6 × 10 –6 /K by dilatometry and 18.43 × 10 –6 /K by in situ XRD. PNC also demonstrates chemical stability against H 2 O and CO 2 . However, PNC symmetrical cell over proton-conducting BaZr 0.4 Ce 0.4 Y 0.1 Yb 0.1 O 3-δ (BZCYYb4411) electrolyte shows significant H 2 O and CO 2 poisoning when those are introduced into O 2 –N 2 mixture. In comparison, symmetrical cells with PNC electrode over the oxygen ion conducting Ce 0.9 Gd 0.1 O 2-δ (GDC) electrolyte show no H 2 O and CO 2 poisoning under similar conditions. Here, it is hypothesized that poisoning from H 2 O and CO 2 of the PNC proton conducting symmetrical cell is caused by their adsorption on the BZCYYb4411 electrolyte instead of PNC electrode. Such a hypothesis is supported by the H 2 O and CO 2 adsorption behaviors on PNC and BZCYYb4411 powder surfaces, as measured by temperature programmed desorption (TPD).

08 HYDROGEN↗
DOE OSTI2020

Critical Hydrogen Coverage Effect on the Hydrogenation of Ethylene Catalyzed by δ-MoC(001): An Ab Initio Thermodynamic and Kinetic Study

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the promotion by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from CO and CO 2 to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to CH 4 and O 2 led to surface CH 3 O and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations which showed that water preferentially dissociates over the active Ce ions at the CeO 2 -Cu 2 O/Cu(111) interface. The adsorbed OH blocked O-O bond cleavage that would dehydrogenate CH 3 O to CO and CO 2 , and it directly converted this species to methanol, while O 2 now reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Literature Review and Experimental Observations of the Effects of Salinity, Hardness, Lithology, and ATBS Content on HPAM Polymer Retention for the Milne Point Polymer Flood

Summary At the Milne Point polymer flood (North Slope of Alaska), polymer retention is dominated by the clay, illite. Illite, and kaolinite cause no delay in polymer propagation in Milne Point core material, but they reduce the effective polymer concentration and viscosity by a significant amount (e.g., 30%), thus reducing the efficiency of oil displacement until the full injected polymer concentration is regained [which requires several pore volumes (PVs) of throughput]. This work demonstrates that polymer retention on illite is not sensitive to monovalent ion concentration, but it increases significantly with increased divalent cation concentration. The incorporation of a small percentage of acrylamido tertiary butyl sulfonic acid (ATBS) monomers into hydrolyzed polyacrylamide (HPAM) polymers is shown to dramatically reduce retention. The results are discussed in context with previous literature reports. Bridging adsorption was proposed as a viable mechanism to explain our results. Interestingly, an extensive literature review reveals that polymer retention (on sands and sandstones) is typically only modestly sensitive to the presence of oil. Extensive examination of the literature on inaccessible pore volume (IAPV) suggests the parameter was commonly substantially overestimated, especially in rock/sand more permeable than 500 md (which comprises the vast majority of existing field polymer floods).

Engineering↗
DOE OSTI2021

Effects of nitrogen on tungsten surfaces investigated with low energy ion scattering

The effect of nitrogen on the surfaces of polycrystalline ITER-grade tungsten and a tungsten single crystal were studied with low energy ion scattering (LEIS) and direct recoil spectroscopy (DRS). LEIS and DRS measurements on both tungsten surfaces were performed in an ultra-high vacuum system as various quantities of N 2 were introduced into the chamber through a variable leak valve. The obtained ion energy spectra reveal that nitrogen was readily adsorbed onto the surface, in turn limiting the amount of hydrogen that could be adsorbed onto the surface. These results not only provide insight into how the presence of nitrogen on tungsten surfaces may play a role in hydrogen adsorption and retention, but also serve to benchmark models being developed to describe the H-N-W system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced pozzolanic reactivity in hydrogen-form zeolites as supplementary cementitious materials

Pozzolans rich in silica and alumina react with lime to form cementing compounds and are incorporated into portland cement as supplementary cementitious materials (SCMs). However, pozzolanic reactions progress slower than portland cement hydration, limiting their use in modern construction due to insufficient early-age strength. Hence, alternative SCMs that enable faster pozzolanic reactions are necessary including synthetic zeolites, which have high surface areas and compositional purity that indicate the possibility of rapid pozzolanic reactivity. Synthetic zeolites with varying cation composition (Na-zeolite, H-zeolite), SiO 2 /Al 2 O 3 ratio, and framework type were evaluated for pozzolanic reactivity via Ca(OH) 2 consumption using ion exchange and in-situ X-ray diffraction experiments. Na-zeolites exhibited limited exchange reactions with KOH and Ca(OH) 2 due to the occupancy of acid sites by Na + and hydroxyl groups. Meanwhile, H-zeolites readily adsorbed K + and Ca 2+ from a hydroxide solution by exchanging cations with H + at Brønsted acid sites or cation adsorption at vacant acid sites. By adsorbing cations, the H-zeolite reduced the pH and increased Ca 2+ solubility to promote pozzolanic reactions in a system where Ca(OH) 2 dissolution/diffusion was a rate limiting factor. High H-zeolite reactivity resulted in 0.8 g of Ca(OH) 2 consumed per 1 g of zeolites after 16 h of reaction versus 0.4 g of Ca(OH) 2 consumed per 1 g of Na-zeolite. The H-zeolite modulated the pore fluid alkalinity and created a low-density amorphous silicate phase via mechanisms analogous to two-step C-S-H nucleation experiments. Finally, controlling these reaction mechanisms is key to developing next generation pozzolanic cementitious systems with comparable hydration rates to portland cement.

36 MATERIALS SCIENCE↗