SEARCH · Search NASA

Results for “layered intermediate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS2015

Nanowire Photovoltaic Devices

Firefly Technologies, in collaboration with the Rochester Institute of Technology and the University of Wisconsin-Madison, developed synthesis methods for highly strained nanowires. Two synthesis routes resulted in successful nanowire epitaxy: direct nucleation and growth on the substrate and a novel selective-epitaxy route based on nanolithography using diblock copolymers. The indium-arsenide (InAs) nanowires are implemented in situ within the epitaxy environment-a significant innovation relative to conventional semiconductor nanowire generation using ex situ gold nanoparticles. The introduction of these nanoscale features may enable an intermediate band solar cell while simultaneously increasing the effective absorption volume that can otherwise limit short-circuit current generated by thin quantized layers. The use of nanowires for photovoltaics decouples the absorption process from the current extraction process by virtue of the high aspect ratio. While no functional solar cells resulted from this effort, considerable fundamental understanding of the nanowire epitaxy kinetics and nanopatterning process was developed. This approach could, in principle, be an enabling technology for heterointegration of dissimilar materials. The technology also is applicable to virtual substrates. Incorporating nanowires onto a recrystallized germanium/metal foil substrate would potentially solve the problem of grain boundary shunting of generated carriers by restricting the cross-sectional area of the nanowire (tens of nanometers in diameter) to sizes smaller than the recrystallized grains (0.5 to 1 micron(exp 2).

Forbes, David↗

DOE OSTI2023

Intermediate Temperature Single Component Electrolysis Cell

This project aims at demonstrating a fundamentally new approach towards electrochemical hydrogen production using a single component cell design. Conventional electrolyzer cells consist of a stack of layers (oxygen and fuel electrodes, electrolyte layer) that require multiple processing steps and add to the fabrication cost and complexity. Here we explore the viability of a single-layer electrolyzer device based on the single-layer SOFC concepts described in literature (Asghar et al, 2020). The single layer material is a composite of ionic conductor and catalytic material consisting of ceria doped with Gd and Sm co-processed with CuFe 2 O 4 .

08 HYDROGEN↗

DOE OSTI2019

A bacterial surface layer protein exploits multistep crystallization for rapid self-assembly

Surface layers (S-layers) are crystalline protein coats surrounding microbial cells. S-layer proteins (SLPs) regulate their extracellular self-assembly by crystallizing when exposed to an environmental trigger. However, molecular mechanisms governing rapid protein crystallization in vivo or in vitro are largely unknown. Here, we demonstrate that the Caulobacter crescentus SLP readily crystallizes into sheets in vitro via a calcium-triggered multistep assembly pathway. This pathway involves 2 domains serving distinct functions in assembly. The C-terminal crystallization domain forms the physiological 2-dimensional (2D) crystal lattice, but full-length protein crystallizes multiple orders of magnitude faster due to the N-terminal nucleation domain. Observing crystallization using a time course of electron cryo-microscopy (Cryo-EM) imaging reveals a crystalline intermediate wherein N-terminal nucleation domains exhibit motional dynamics with respect to rigid lattice-forming crystallization domains. Dynamic flexibility between the 2 domains rationalizes efficient S-layer crystal nucleation on the curved cellular surface. Rate enhancement of protein crystallization by a discrete nucleation domain may enable engineering of kinetically controllable self-assembling 2D macromolecular nanomaterials.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

GaAs Substrate Recycling Using in-situ Deposited NaCl Layers via Molecular Beam Epitaxy

This work presents an alternative method to conventional III-V substrate recycling methods via growth of NaCl on nearly-lattice matched GaAs (001) substrates. Reflection high energy electron diffraction and transmission electron microscopy confirm an epitaxial relationship between the NaCl layers and the underlying GaAs. If the sample is heated too much prior to GaAs deposition, the NaCl fully desorbs from the surface. The quality of the deposition of GaAs on NaCl ranges from amorphous at low temperature to polycrystalline at intermediate temperatures. Exposure to electron beams during growth results in larger and (001) textured grains. The substrate is separated from the GaAs film in seconds via submersion in water, revealing a substrate surface comparable to the original.

electron beams↗

DOE OSTI2021

Simulated Dust Transport in the Convective Boundary Layer

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth's radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud–relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large–eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large–eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART–WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi–single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. Furthermore, these results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2003

Method of making a ceramic with preferential oxygen reactive layer

A method of forming an article. The method comprises forming a silicon-based substrate that is oxidizable by reaction with an oxidant to form at least one gaseous product and applying an intermediate layer/coating onto the substrate, wherein the intermediate layer/coating is oxidizable to a nongaseous product by reaction with the oxidant in preference to reaction of the silicon-containing substrate with the oxidant.

Wang, Hongyu↗

NASA NTRSDate not supplied

Hardware-Efficient Quantum Optimization Layered Algorithms and Experiments

Quantum optimization algorithms, such as QAOA, that implement parametrized stochastic optimization solvers attempt to identify low-energy solutions of Ising systems by exploiting available quantum effects in noisy-intermediate scale machines. Engineering a well-performing parametrized quantum optimization circuit is indeed an exercise in balancing the trade-off between expressivity and implementation complexity. We show that, for MaxCut QAOA circuits defined on native hardware topology (Rigetti’s Aspen Quantum Processors), error-mitigation techniques recover simulated features of the noiseless theory. Moreover, we explore a design space for QAOA-like ansatze that perform well in theory as well as in hardware for fully-connected problems. We also discuss how efficient coherence and entanglement detection methods that could be coupled with quantum optimization experiments require only linear overhead in benchmarking time.

quantum computing↗

NASA NTRS1984

Interacting boundary-layer solutions for laminar separated flow past airfoils

Numerical solutions of the interacting laminar boundary layer equations are presented for two symmetric airfoils at zero incidence: the NACA 0012 and the NACA 66 sub 3-108 airfoils. The potential flow was computed using Carlson's code, and viscous interaction was treated following a Hilbert integral scheme due to Veldman. Effects of various grid parameters are studied, and pressure and skin friction distributions are compared at several Reynolds numbers. For the NACA 0012 airfoil, Reynolds number is varied from a value just below separation (R sub N = 3000) to a value for which extensive separation occurs (R sub N = 100,000). For the 66 sub 3-018 airfoil, results are given at intermediate values (R sub N - 10,000 and 40,000). The method fails to converge for greater values of Reynolds number, corresponding to the development of very thin well separated shear layers where transition to turbulence would occur naturally.

Burggraf, O. R.↗

DOE OSTI2020

Dataset for "FLEXPART-WRF simulations to assess dust transport in the convective boundary layer at the Southern Great Plains site"

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth’s radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud-relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large-eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large-eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART-WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi-single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. These results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Highly selective and productive reduction of carbon dioxide to multicarbon products via in situ CO management using segmented tandem electrodes

Electrochemical CO 2 reduction provides a promising route to the sustainable generation of valuable chemicals and fuels. Tandem catalysts enable sequential CO 2 -to-CO and CO-to-multicarbon (C 2+ ) product conversions on complementary active sites, to produce high C 2+ Faradaic efficiency (FE). Unfortunately, previous tandem catalysts exhibit poor management of CO intermediates, which diminishes C 2+ FE. Here, we design segmented gas-diffusion electrodes (s-GDEs) in which a CO-selective catalyst layer (CL) segment at the inlet prolongs CO residence time in the subsequent C 2+ -selective segment, enhancing conversion. This phenomenon enables increases in both the CO utilization and C 2+ current density for a Cu/Ag s-GDE compared to pure Cu, by increasing the *CO coverage within the Cu CL. Lastly, we develop a Cu/Fe-N-C s-GDE with 90% C 2+ FE at C 2+ partial current density (j C2+ ) exceeding 1 A cm -2 . These results prove the importance of transport and establish design principles to improve C 2+ FE and j C2+ in tandem CO 2 reduction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

First-principles study of magnetic states and the anomalous Hall conductivity of M Nb 3 S 6 ( M = Co, Fe, Mn, and Ni)

Here, inspired by the observation of the extremely large anomalous Hall effect in the absence of applied magnetic fields or uniform magnetization in CoNb 3 S 6 [Nat. Commun. 9, 3280 (2018); Phys. Rev. Research 2, 023051 (2020)], we perform a first-principles study of this and related compounds of the MNb 3 S 6 type with different transition metal M ions to determine their magnetic orders and the anomalous Hall conductivity (AHC). We find that noncoplanar antiferromagnetic ordering is favored relative to collinear or coplanar order in the case of M = Co, Fe, and Ni, while ferromagnetic ordering is favored in MnNb 3 S 6 at low temperatures. The AHC in these materials with noncoplanar spin ordering can reach about e 2 /h per crystalline layer, while being negligible for coplanar and collinear cases. We also find that the AHC depends sensitively on doping and reaches a maximum for intermediate values of the local spin exchange potential between 0.3 and 0.8 eV. Our AHC results are consistent with the reported Hall measurements in CoNb 3 S 6 and suggest a possibility of similarly large anomalous Hall effects in related compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Designing Ta C Virtual Substrates for Vertical Al x Ga 1 − x N Power Electronics Devices

Power electronics are critical for a sustainable energy future, playing a key role in electrification and integration of renewable energy sources into the grid. Advances in ultrawide band gap materials are needed to handle higher powers in smaller form factors while reducing electrical and thermal losses. High Al content Al x Ga 1 − x N is theoretically capable of meeting these demands, but its impact in power electronics has been severely restricted by a lack of substrates that can satisfy conductivity, lattice matching, and/or thermal expansion requirements. We demonstrate that electrically conductive Ta C can be used as a virtual substrate for Al x Ga 1 − x N heteroepitaxy. Scaleably sputtered Ta C grown on Al 2 O 3 , followed by high-temperature face-to-face annealing, produces a thin film Ta C template with an effective hexagonal lattice constant matched to Al 0.70 Ga 0.30 N . Annealing of the Ta C promotes recrystallization, significantly improving crystallinity and reducing crystalline defects from as-deposited columnar grains to a step-and-terrace surface morphology, enabling the subsequent growth of high-quality Al 0.70 Ga 0.30 N by molecular beam epitaxy. X-ray diffraction and scanning transmission electron microscopy confirm that the Al x Ga 1 − x N layer is heteroepitaxially aligned, strain-free, and lattice-matched, transitioning abruptly from Ta C to Al x Ga 1 − x N without intermediate phases. These results demonstrate Ta C virtual substrates as electrically conductive, lattice-matched, and thermally compatible templates for vertical Al x Ga 1 − x N devices that can meet the growing power needs of a sustainable energy future. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

DOE OSTI2023

Smoothing tool design and performance during subaperture glass polishing

During subaperture tool grinding and polishing, overlaps of the tool influence function can result in undesirable mid-spatial frequency (MSF) errors in the form of surface ripples, which are often corrected using a smoothing polishing step. Here, in this study, flat multi-layer smoothing polishing tools are designed and tested to simultaneously (1) reduce or remove MSF errors, (2) minimize surface figure degradation, and (3) maximize the material removal rate. A time-dependent convergence model in which spatial material removal varies with a workpiece-tool height mismatch, combined with a finite element mechanical analysis to determine the interface contact pressure distribution, was developed to evaluate various smoothing tool designs as a function of tool material properties, thicknesses, pad textures, and displacements. An improvement in smoothing tool performance is achieved when the gap pressure constant, $\overline{h}$ (which describes the inverse rate at which the pressure drops with a workpiece-tool height mismatch), is minimized for smaller spatial scale length surface features (namely, MSF errors) and maximized for large spatial scale length features (i.e., surface figure). Five specific smoothing tool designs were experimentally evaluated. A two-layer smoothing tool using a thin, grooved IC1000 polyurethane pad (with a high elastic modulus, E pad =360 MPa ), thicker blue foam (with an intermediate modulus, E foam =5.3 MPa ) underlayer, and an optimized displacement (d t =1 mm ) provided the best overall performance (namely, high MSF error convergence, minimal surface figure degradation, and high material removal rate).

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Controlling Interlayer Disorder Toward Reversible Phase Transition in a Layered Sodium Manganese Oxide Cathode

Sodium manganese oxides are promising Na-ion battery cathodes but they suffer from irreversible phase transitions during electrochemical reactions. Most strategies to date have aimed to suppress the phase transitions by stabilizing their layered structures through limiting the content of extractable Na + . Here, we conversely increase atomic disorder in the Na-birnessite, a layered sodium manganese oxide, and thereby modulate its phase transition behavior toward improved electrochemical reversibility. Our study reveals that Mn vacancies and Mn migrated into the interlayer affect interlayer local environment of Na + and water molecules consequently enhancing Na + mobility. We observe better capacity retention for disordered “D-Na-birnessite”, which undergoes a reversible phase transition from the birnessite-type structure to an O′3-type α-Na x MnO 2 -like structure through another intermediate metastable birnessite-type phase. In conclusion, this research highlights the positive effects of atomic disorder to regulate phase transition routes for achieving superior electrochemical reversibility, finally paving the way to overcoming the limits of layered oxide cathodes.

Kang, Seongkoo [Korea Univ., Seoul, (Korea, Republ↗

NASA NTRS1975

Evaluation of some control-volume techniques for analysis of shock-boundary layer interactions in supersonic inlets

Various control-volume models used to analyze the shock boundary layer bleed interaction were investigated. The bleed assumptions of the models and their influence on the analytical solutions are discussed. The results of the analysis using these models are compared with experimental boundary-layer data taken in a supersonic inlet. The experimental Mach number upstream of the interaction was 1.66, and the oblique-shock pressure ratio was 1.33. The boundary layer data included bleed flow rates up to approximately 0.6 of the upstream boundary layer mass flow rate. The first model assumed the bleed was removed from the control volume with a momentum that was characterized by a pressure intermediate between the upstream and downstream pressures. The second model assumed the control volume was bounded by a streamline dividing the bleed and residual flows and eliminated the need to specify the momentum of the bleed flow. Comparison of the results using the models showed that specifying the bleed pressure in one model was equivalent to specifying the pressure along the dividing streamline in the other.

Hingst, W. R.↗

NASA NTRS1988

Transmission electron microscopy study of the formation of epitaxial CoSi2/Si (111) by a room-temperature codeposition technique

Co and Si have been codeposited on Si (111) substrates near room temperature in a stoichiometric 1:2 ratio in a molecular beam epitaxy system. Annealing of these deposits yields high-quality single-crystal CoSi2 layers. Transmission electron microscopy has been used to examine as-deposited layers and layers annealed at 300, 500, and 600 C. Single-crystal epitaxial grains of CoSi2 embedded in a matrix of amorphous Co/Si are observed in as-deposited samples, while the layer is predominantly single-crystal, inhomogeneously strained CoSi2 at 300 C. At 600 C, a homogeneously strained single-crystal layer with a high density of pinholes is observed. In contrast to other solid phase epitaxy techniques used to grow CoSi2 on Si (111), no intermediate silicide phases are observed prior to the formation of CoSi2.

D'Anterroches, Cecile↗

NASA NTRS1990

The atmospheric abundance of SO2 on Io

The IUE satellite has obtained near-UV spectra of Io with sufficient resolution to ascertain the east, or leading and west, or trailing hemispheres' dayside atmosphere SO2 abundance. The derived geometric albedos are compared with various model albedos that might result from proposed SO2 atmospheres, as well as from localized, sublimation- or volcanism-generated atmospheres. A homogeneous-layer alternative atmosphere is introduced whose upper limit on the average SO2 column density for both hemispheres implies that a collisionally thick SO2 atmosphere of intermediate density may have been present on Io's dayside during the present observations.

Ballester, Gilda E.↗

NASA NTRS1993

Hot corrosion of the B2 nickel aluminides

The hot corrosion behavior of the B2 nickel aluminides was studied to determine the inherent hot corrosion resistance of the beta nickel aluminides and to develop a mechanism for the hot corrosion of the beta nickel aluminides. The effects of the prior processing of the material, small additions of zirconium, stoichiometry of the materials, and preoxidation of the samples were also examined. Additions of 2, 5, and 15 w/o chromium were used to determine the effect of chromium on the hot corrosion of the beta nickel aluminides and the minimum amount of chromium necessary for good hot corrosion resistance. The results indicate that the beta nickel aluminides have inferior inherent hot corrosion resistance despite their excellent oxidation resistance. Prior processing and zirconium additions had no discernible effect on the hot corrosion resistance of the alloys. Preoxidation extended the incubation period of the alloys only a few hours and was not considered to be an effective means of stopping hot corrosion. Stoichiometry was a major factor in determining the hot corrosion resistance of the alloys with the higher aluminum alloys having a definitely superior hot corrosion resistance. The addition of chromium to the alloys stopped the hot corrosion attack in the alloys tested. From a variety of experimental results, a complex hot corrosion mechanism was proposed. During the early stages of the hot corrosion of these alloys the corrosion is dominated by a local sulphidation/oxidation form of attack. During the intermediate stages of the hot corrosion, the aluminum depletion at the surface leads to a change in the oxidation mechanism from a protective external alumina layer to a mixed nickel-aluminum spinel and nickel oxide that can occur both externally and internally. The material undergoes extensive cracking during the later portions of the hot corrosion.

Ellis, David L.↗