SEARCH · Search NASA
Results for “minimization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Minimizing Timing Jitter’s Impact on Ground-Penetrating Radar Array Coupling Signals
This article presents a novel investigation into the effect of receiver timing jitter on the quality of imaging of ground-penetrating radar systems. We explicitly show the impact of timing jitter throughout an entire example processing pipeline. The process of coupling removal in systems whose receivers have a random Gaussian-distributed jitter with a high standard deviation leaves randomly distributed residue in the radar image. This residue, called jitter-induced coupling noise, extends even into the expected target domain which may cause false alarms. This residue approximately follows a sum of Gaussian and Gamma distributions based on the higher order derivatives of the coupling signal. Once migrated to create an image, the coupling residue is best described by a Weibull distribution. We show that simple filtering does not remove enough residue and propose two preventative design specifications called the linear slope and migrated probability specifications. Antenna and system designers should use these specifications to assess the true severity of coupling signals in a given jitter environment.
Real-time Selective Harmonic Minimization Using a Hybrid Analog/Digital Computing Method
Not provided.
Peak Power Minimization for Commercial Thermostatically Controlled Loads in Multi-Unit Grid-Interactive Efficient Buildings
The load profiles of most commercial and industrial consumers are characterized by brief periods of very high power consumption followed by intervals of lower demand. To encourage such consumers to flatten their load profiles, power utilities in and around the world often levy a monthly demand charge (DC) on the peak demand measured over brief intervals. In this work, we consider the joint optimization of energy costs (EC) and the instantaneous peak power of a multi-unit building which uses a hydronic heating, ventilation and cooling (HVAC) system and responds to a demand response (DR) program. Despite the non-linear structure of the problem, we show how optimal solutions can be obtained efficiently using linear programming. Next, we study the power demand patterns resulting from our proposed strategy for thermostatically controlled loads (TCLs), and evaluate the strategy’s performance for various climate zones in the US, under both typical and atypical weather conditions. Finally, the results show that depending on the ambient conditions and the tariff structure, our strategy can result in utility bill savings of up to nearly 19% compared to the baseline. The results also indicate that our power control strategy can significantly reduce the instantaneous peak power consumption in commercial TCLs.
PWM for Simultaneous Minimization of Switching Losses and CM Voltage in Current Source Inverters
This article proposes a new pulsewidth modulation (PWM) scheme that reduces common-mode (CM) voltage and switching losses simultaneously in CSI. The proposed PWM [i.e., reduced voltages PWM (RVM)] reduces CM voltages and switching losses by selecting the optimal zero current vector and PWM sequence based on the CSI output voltage conditions. This article also proves the proposed RVM achieves both objectives (i.e., reduced CM voltage and switching losses) simultaneously for all CSI operating conditions without compromising the other objective. The proposed RVM inherently achieves zero-voltage switching (ZVS) conditions during the zero current vector transitions, further reducing the switching losses. Experimental results demonstrate significant reductions in CM voltage, reaching up to approximately 95%, accompanied by an increase of up to about 5.5% in CSI efficiency across a wide operating range compared to alternative PWM methods, confirming the predicted advantages of the proposed RVM.
Predictive Equivalent Consumption Minimization Strategy With Segmented Traffic Information
Not provided.
River Basin Export Reduction Optimization Support Tool; a tool to screen options for reducing nutrient loads while minimizing cost
Abstract Excess loading of nitrogen and phosphorus to river networks causes environmental harm, but reducing loads from large river basins is difficult and expensive. We developed a new tool, the River Basin Export Reduction Optimization Support Tool (RBEROST) to identify the least‐cost combinations of management practices that will reduce nutrient loading to target levels in downstream and mid‐network waterbodies. We demonstrate the utility of the tool in a case study in the Upper Connecticut River Basin in New England, USA. The total project cost of optimized lowest‐cost plans ranged from $18.0 million to $41.0 million per year over 15 years depending on user specifications. Plans include both point source and non‐point source management practices, and most costs are associated with urban stormwater practices. Adding a 2% margin of safety to loading targets improved the estimated probability of success from 37.5% to 99%. The large spatial scale of RBEROST, and the consideration of both point and non‐point source contributions of nutrients, make it well suited as an initial screening tool in watershed planning.
The loss or absence of minimal residual disease of <0·1% at any time after two cycles of consolidation chemotherapy in CBFB–MYH11 ‐positive acute myeloid leukaemia indicates poor prognosis
Summary No consensus has been reached on the relationship between CBFB‐MYH11 copies and prognosis. Of 1525 acute myeloid leukemia (AML) patients, 58 with CBFB‐MYH11‐positive AML (16/58 patients with c‐kit mutation) were retrospectively analyzed with a median follow‐up duration of 29.8 (range: 4.8–74.4) months. Of these, 25/58 (43.1%) patients underwent allogeneic hematopoietic stem cell transplantation (allo‐HSCT), 10 of whom had the c‐kit mutation. Of the 33 patients who did not undergo allo‐HSCT, recurrence in patients with CBFB‐MYH11/ABL level >0.1% at any time after two consolidation cycles was significantly higher than in patients with CBFB‐MYH11/ABL level <0.1% (61.9% vs. 0%, P = 0.001); further, the 3‐year relapse‐free survival (RFS; 31.4% vs. 100%, P = 0.004) and event‐free survival (EFS; 33.1% vs. 100%, P = 0.004) were significantly decreased in patients with CBFB‐MYH11/ABL level >0.1% at any time after two consolidation cycles. The 3‐year RFS and EFS rates were lower in patients who did not receive allo‐HSCT than in those who did (31.4% vs 84.6%, P = 0.000; 31.4% vs. 80.8%, P = 0.001). CBFB‐MYH11‐positive AML patients with CBFB‐MYH11/ABL level >0.1% at any time after two cycles of consolidation had poor prognoses, and allo‐HSCT could improve their survival.
Minimizing cost in a 100% renewable electricity grid: A case study of wave energy in California.
Abstract not provided.
Global minimization via classical tunneling assisted by collective force field formation
Simple elements interacting in networks can give rise to intricate emergent behaviors. Examples such as synchronization and phase transitions often apply in many contexts, as many different systems may reduce to the same effective model. Here, we demonstrate such a behavior in a model inspired by memristors. When weakly driven, the system is described by movement in an effective potential, but when strongly driven, instabilities cause escapes from local minima, which can be interpreted as an unstable tunneling mechanism. We dub this collective and nonperturbative effect a “Lyapunov force,” which steers the system toward the global minimum of the potential function, even if the full system has a constellation of equilibrium points growing exponentially with the system size. This mechanism is appealing for its physical relevance in nanoscale physics and for its possible applications in optimization, Monte Carlo schemes, and machine learning.
Phenotypic and genomic characterization of Methanothermobacter wolfeii strain BSEL, a CO 2 -capturing archaeon with minimal nutrient requirements
A new variant of Methanothermobacter wolfeii was isolated from an anaerobic digester using enrichment cultivation in anaerobic conditions. Here, the new isolate was taxonomically identified via 16S rRNA gene sequencing and tagged as M. wolfeii BSEL. The whole genome of the new variant was sequenced and de novo assembled. Genomic variations between the BSEL strain and the type strain were discovered, suggesting evolutionary adaptations of the BSEL strain that conferred advantages while growing under a low concentration of nutrients. M. wolfeii BSEL displayed the highest specific growth rate ever reported for the wolfeii species (0.27 ± 0.03 h –1 ) using carbon dioxide (CO 2 ) as unique carbon source and hydrogen (H 2 ) as electron donor. M. wolfeii BSEL grew at this rate in an environment with ammonium (NH 4 + ) as sole nitrogen source. The minerals content required to cultivate the BSEL strain was relatively low and resembled the ionic background of tap water without mineral supplements. Optimum growth rate for the new isolate was observed at 64°C and pH 8.3. In this work, it was shown that wastewater from a wastewater treatment facility can be used as a low-cost alternative medium to cultivate M. wolfeii BSEL. Continuous gas fermentation fed with a synthetic biogas mimic along with H 2 in a bubble column bioreactor using M. wolfeii BSEL as biocatalyst resulted in a CO 2 conversion efficiency of 97% and a final methane (CH 4 ) titer of 98.5%v, demonstrating the ability of the new strain for upgrading biogas to renewable natural gas.
Learning the Structure of Any Hamiltonian from Minimal Assumptions (STOC '25 Proceedings)
Short and revised version of SAND2024-14806O, to be published in the Proceedings of the ACM STOC 2025