Search NASA⌕ Search

SEARCH · Search NASA

Results for “modeling discrepancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Application of a computable model of human spatial vision to phase discrimination

A computable model of human spatial vision is used to make predictions for phase-discrimination experiments. This model is being developed to deal with a broad range of problems in vision and was not specifically formulated to deal with phase discrimination. In the model, cross-correlation of the stimuli with an array of sensors produces feature vectors that are operated on by a position-uncertain ideal observer to simulate detection and discrimination experiments. In this report, the stimuli are compound sinusoidal gratings composed of a fundamental and a higher-frequency component added in various phases. Model predictions are compared with three key results from the literature: (1) the effect of the contrast of the fundamental on phase discrimination, (2) threshold phase difference as a function of the fundamental frequency, and (3) the contrast required for phase discrimination as a function of the frequency ratio of the two grating components. In the first two cases, the predictions capture the main features of the data, although quantitative discrepancies remain. In the third case, the model fails, and this failure suggests additional restrictions on the combination of information across sensors.

Nielsen, K. R. K.↗
NASA NTRS2017

Data Assimilation and Uncertainties in Early Solar Cycle Predictions

Stochastic nature of solar activity variations together with our limited knowledge of the dynamo mechanism and subsurface dynamics causes uncertainty in predictions of the solar cycle. For improving the physics-­‐based predictions we can take advantage of the mathematical data assimilation approach that allows us to take into account both, observational errors and model uncertainties, and provide estimates of the next solar cycle along with prediction uncertainties. In this study we use the Parker's migratory dynamo model together with the equation of magnetic helicity balance, which reproduces main properties of the sunspot cycles and allow us to minimize discrepancies between the observed global activity variations and the model solution. The test simulation runs show that a reliable prediction can be obtained for two phases of preceding solar cycle: 1) if the polar field reversals shortly after the solar maxima (strong toroidal field and weak poloidal field), and 2) during the solar minima (strongest poloidal and weak toroidal fields). The early estimate of Cycle 25 obtained by this method shows that this cycle will start in 2019 – 2020, reach the maximum in 2023 – 2024, and that the mean sunspot number at the maximum will be about 90 (for the v2.0 sunspot number series).

Data Assimilation↗
NASA NTRS2020

Assessment of NO2 Observations During DISCOVER-AQ and KORUS-AQ Field Campaigns

NASA’s Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ, conducted in 2011–2014) campaign in the United States and the joint NASA and National Institute of Environmental Research (NIER) Korea–United States Air Quality Study (KORUS-AQ, conducted in 2016) in South Korea were two field study programs that provided comprehensive, integrated data sets of airborne and surface observations of atmospheric constituents, including nitrogen dioxide (NO2), with the goal of improving the interpretation of spaceborne remote sensing data. Various types of NO2 measurements were made, including in situ concentrations and column amounts of NO2 using ground- and aircraft-based instruments, while NO2 column amounts were being derived from the Ozone Monitoring Instrument (OMI) on the Aura satellite. This study takes advantage of these unique datasets by first evaluating in situ data taken from two different instruments on the same aircraft platform, comparing coincidently sampled profile-integrated columns from aircraft spirals with remotely sensed column observations from ground-based Pandora spectrometers, intercomparing column observations from the ground (Pandora), aircraft (in situ vertical spirals), and space (OMI), and evaluating NO2 simulations from coarse Global Modeling Initiative (GMI) and high-resolution regional models. We then use these data to interpret observed discrepancies due to differences in sampling and deficiencies in the data reduction process. Finally, we assess satellite retrieval sensitivity to observed and modeled a priori NO2 profiles. Contemporaneous measurements from two aircraft instruments that likely sample similar air masses generally agree very well but are also found to differ in integrated columns by up to 31.9 %. These show even larger differences with Pandora, reaching up to 53.9 %, potentially due to a combination of strong gradients in NO2 fields that could be missed by aircraft spirals and errors in the Pandora retrievals. OMI NO2 values are about a actor of 2 lower in these highly polluted environments due in part to inaccurate retrieval assumptions (e.g., a priori pro-files) but mostly to OMI’s large footprint (>312 km2).

Nitrogen dioxide↗
NASA NTRS2018

On the Discrepancy Between the X-Ray and UV Absorption Measurements of O VI in the Local ISM

The total amount of Ovi present in the interstellar medium (ISM) obtained via absorption measurements in UV and X-ray spectra is currently in disagreement, with the latter being significantly larger (by a factor of 10 or more) than the former. Previous works have proposed that the blend of the Ovi K line (22.032 Ã) with the Oii K-L12 line (22.04 Ã) could account for the stronger absorption observed in the X-ray spectra. Here, we present a detailed study of the oxygen absorption in the local ISM, implementing our new model IGMabs which includes photoabsorption cross-sections of highly ionized species of abundant elements as well as turbulence broadening. By analysing high-resolution Chandra spectra of 13 low-mass X-ray binaries (LMXBs) and 29 extragalactic sources, we have estimated the column densities of Oi - Oiii and from Ovi - Oviii along multiple line-of-sights. We find that in most cases the Oii K-L12 line accounts for <30 per cent of the total Ovi K a + Oii K b. We conclude that the amount of Oii predicted by our model is still insufficient to explain the discrepancy between X-ray and UV measurements of Ovi column densities.

Gatuzz, Efrain↗
NASA NTRS2004

O VI Emission from the Interstellar Medium

This project's primary goal was to examine the Local Bubble, a large hot bubble surrounding the solar neighborhood. In order to do this, we observed the 1032 and 1038 A resonance line emission from O VI in the bubble and used the,results to comment on models for the Local Bubble and its embedded clouds. In order to maximize the signal to noise of our spectrum, we combined the awarded guest investigator observation with unpublished FUSE In Orbit Checkout observations. The resulting spectrum was sufficiently good as to enable us to place tight 2 sigma upper limits on the intensities of the 1032 and the 1038 A resonance lines. We also measured or placed upper limits on the other cosmic lines in the bandpass, including C III and C II. These are the first known ultraviolet emission line measurements and/or upper limits for the gas in the Local Bubble (as opposed to gas anywhere along long lines of sight). With the O VI upper limits, we were able to quantitatively evaluate competing theories for the origins of the Local Bubble. The upper limits are well below those expected in the Breitschwerdt model (which proposes that during its its early development, the Local Bubble rapidly expanded beyond its nascent cloud and, as a result, is now vastly underionized). The upper limits on the O VI resonance line doublet intensity and the measurement of the C III intensity, garnered from this project, combined with measurements of the O VI column density, garnered from another project, are so far below the predictions, that they make a good case for eliminating the Breitschwerdt model from the field of possibilities. Thus, instead of being vastly underionized, the Local Bubble is near ionizational equilibrium. In addition, the upper limits challenge the other well-known model for the Local Bubble. In that model, the Local Bubble was blown by a series of supernova explosions and winds and contains a myriad of evaporating clouds. The intensity of the O VI resonance line doublet predicted from models exceeds the observationally determined 2 sigma upper limits. The discrepancy prompts the exciting suggestion that there may be some astrophysics yet to be considered in standard hydrodynamic models. These measurements performed a second useful function. By subtract- ing them from the O VI intensity observed on long sight-lines through the Galactic halo and Local Bubble, we were able to estimate the intensity originating the Galactic halo.

Shelton, Robin L.↗
NASA NTRS2005

Measurement and Prediction of the Thermomechanical Response of Shape Memory Alloy Hybrid Composite Beams

Previous work at NASA Langley Research Center (LaRC) involved fabrication and testing of composite beams with embedded, pre-strained shape memory alloy (SMA) ribbons within the beam structures. That study also provided comparison of experimental results with numerical predictions from a research code making use of a new thermoelastic model for shape memory alloy hybrid composite (SMAHC) structures. The previous work showed qualitative validation of the numerical model. However, deficiencies in the experimental-numerical correlation were noted and hypotheses for the discrepancies were given for further investigation. The goal of this work is to refine the experimental measurement and numerical modeling approaches in order to better understand the discrepancies, improve the correlation between prediction and measurement, and provide rigorous quantitative validation of the numerical analysis/design tool. The experimental investigation is refined by a more thorough test procedure and incorporation of higher fidelity measurements such as infrared thermography and projection moire interferometry. The numerical results are produced by a recently commercialized version of the constitutive model as implemented in ABAQUS and are refined by incorporation of additional measured parameters such as geometric imperfection. Thermal buckling, post-buckling, and random responses to thermal and inertial (base acceleration) loads are studied. The results demonstrate the effectiveness of SMAHC structures in controlling static and dynamic responses by adaptive stiffening. Excellent agreement is achieved between the predicted and measured results of the static and dynamic thermomechanical response, thereby providing quantitative validation of the numerical tool.

Davis, Brian↗
NASA NTRS1993

Primary results from the Berkeley EUV airglow rocket spectrometer: O I and N2 FUV/EUV dayglow in the thermosphere and lower exosphere

The Berkeley extreme-ultraviolet airglow rocket spectrometer (BEARS) made spectroscopic measurements of far and extreme UV, atomic oxygen emissions from a Black Brandt XII (12.041 WT) sounding rocket launched from Wallops Island, Virginia, on September 30, 1988. BEARS' primary instrument, a near-normal Rowland mount spectrometer, measured several atomix oxygen and molecular nitrogen dayglow features at high spectral resolution (1.5 A): O I (989, 1027, 1304, and 1356 A); and N2 Lyman-Birge-Hopfield (4, 0) and (3, 0) bands at 1325 and 1354 A. The instrument collected over 800 s of data spanning altitudes of 150 - 963 km with look directions between 95 deg and 125 deg from zenith. We have analyzed the data using electrons and radiative transport models in a forward modeling approach. The model and data are generally in good agreement. However, there are some discrepancies, which are discussed in terms of remote sensing capabilities and improvements to the models.

Cotton, Daniel M.↗
NASA NTRS2002

Hot HB Stars in Globular Clusters - Physical Parameters and Consequences for Theory. VI. The Second Parameter Pair M3 and M13

We present the results of spectroscopic analyses of hot horizontal branch (HB) stars in M13 and M3, which form a famous second parameter pair. From the spectra we derived - for the first time in M13 - atmospheric parameters (effective temperature and surface gravity) as well as abundances of helium, magnesium, and iron. Consistent with analyses of hot HB stars in other globular clusters we find evidence for helium depletion and iron enrichment in stars hotter than about 12,000 K in both M3 and M13. Accounting for the iron enrichment substantially improves the agreement with canonical evolutionary models, although the derived gravities and masses are still somewhat too low. This remaining discrepancy may be an indication that scaled-solar metal-rich model atmospheres do not adequately represent the highly non-solar abundance ratios found in blue HB stars with radiative levitation. We discuss the effects of an enhancement in the envelope helium abundance on the atmospheric parameters of the blue HB stars, as might be caused by deep mixing on the red giant branch or primordial pollution from an earlier generation of intermediate mass asymptotic giant branch stars.

Moehler, S.↗
NASA NTRS2003

Hot HB Stars in Globular Clusters: Physical Parameters and Consequences for Theory: The Second Parameter Pair M 3 and M 13 - VI

We present the results of spectroscopic analyses of hot horizontal branch (HB) stars in M 13 and M 3, which form a famous "second parameter" pair. F rom the spectra and Stromgren photometry we derived - for the first time in M 13 - atmospheric parameters (effective temperature and surface gravity). For stars with Stromgren temperatures between 10,000 and 12,000 K we found excellent agreement between the atmospheric parameters derived from Stromgren photometry and those derived from Balmer line profile fits. However, for cooler stars there is a disagreement in the parameters derived by the two methods, for which we have no satisfactory explanation. Stars hotter than 12,000 K show evidence for helium depletion and iron enrichment, both in M 3 and M 13. Accounting for the iron enrichment substantially improves the agreement with canonical evolutionary models, although the derived gravities and masses are still somewhat too low. This remaining discrepancy may be an indication that scaled-solar metal-rich model atmospheres do not adequately represent the highly non-solar abundance ratios found in blue HB stars affected by diffusion. We discuss the effects of an enhancement in the envelope helium abundance on the atmospheric parameters of the blue HB stars, as might be caused by deep mixing on the red giant branch or primordial pollution from an earlier generation of intermediate mass asymptotic giant branch stars. Key words. Stars: atmospheres - Stars: evolution - Stars: horizontal branch - Globular clusters: individual: M 3 - Globular clusters: individual: M 13

Moehler, S.↗
NASA NTRS1986

Further shock tunnel studies of scramjet phenomena

Scramjet phenomena were studied using the shock tunnel T3 at the Australian National University. Simple two dimensional models were used with a combination of wall and central injectors. Silane as an additive to hydrogen fuel was studied over a range of temperatures and pressures to evaluate its effect as an ignition aid. The film cooling effect of surface injected hydrogen was measured over a wide range of equivalence. Heat transfer measurements without injection were repeated to confirm previous indications of heating rates lower than simple flat plate predictions for laminar boundary layers in equilibrium flow. The previous results were reproduced and the discrepancies are discussed in terms of the model geometry and departures of the flow from equilibrium. In the thrust producing mode, attempts were made to increase specific impulse with wall injection. Some preliminary tests were also performed on shock induced ignition, to investigate the possibility in flight of injecting fuel upstream of the combustion chamber, where it could mix but not burn.

Morgan, R. G.↗
NASA NTRS2004

A Correction for the IRI Topside Electron Density Model Based on Alouette/ISIS Topside Sounder Data

The topside segment of the International Reference Ionosphere (IRI) electron density model (and also of the Bent model) is based on the limited amount of topside data available at the time (40,OOO Alouette 1 profiles). Being established from such a small database it is therefore not surprising that the models have well-known shortcomings, for example, at high solar activities. Meanwhile a large data base of close to 200,000 topside profiles from Alouette 1,2, and ISIS I, 2 has become available online. A program of automated scaling and inversion of a large volume of digitized ionograms adds continuously to this data pool. We have used the currently available ISIs/Alouette topside profiles to evaluate the IRI topside model and to investigate ways of improving the model. The IRI model performs generally well at middle latitudes and shows discrepancies at low and high latitudes and these discrepancies are largest during high solar activity. In the upper topside IRI consistently overestimates the measurements. Based on averages of the data-model ratios we have established correction factors for the IRI model. These factors vary with altitude, modified dip latitude, and local time.

Bilitza, D.↗
NASA NTRS1976

The interplanetary magnetic field structure

The seasonal bias in the sector structure of the interplanetary magnetic field has led to the suggestion that the field in each hemisphere of the solar cavity has the same polarity as the average magnetic field at the corresponding solar pole, and that the surface which separates the two polarity regions is only slightly warped. In this scheme the observed sector structure results from corotation of the warped surface past the earth with the angular velocity of the sun. This picture of the interplanetary field structure provides a simple explanation for the solar magnetic cycle periodicity of the diurnal variation of energetic cosmic rays. A discrepancy between the large latitudinal extent of the photospheric sector structure and the apparently small extent of the interplanetary sector structure places constraints on models of the origin of the solar wind. The discrepancy can be resolved if the solar wind originates high in the solar atmosphere where the geometry of the interplanetary field is simplified by magnetic stresses, or if coronal holes produce a large portion of the solar wind.

Levy, E. H.↗
NASA NTRS2001

Ground-Based Correlates of Solar Irradiance Variation

Ground-based instruments cannot directly measure solar irradiance variability at the 0.1% level at which it occurs because of the earth's atmosphere. However, many forms of ground-based solar observations correlate well with solar irradiance variations, and this fact has been used to construct facular-sunspot models which can explain about 90% of the variance of total solar irradiance as observed by spacecraft radiometers. It is not yet clear whether remaining discrepancies are observational or require additional sources in the model. This paper is a selective review of the current status of the use of ground-based data to understand spacecraft observations of solar irradiance and to apply this understanding to periods before space-based measurements were available. New results from the extension of the histogram analysis of NASA/NSO spectromagnetograph observations (Jones et al., 2000, ApJ529, 1070) to the period from Nov. 1992 to Sep. 2000 are reported which confirm that strong mixed polarity magnetic regions (quiet network) are not significantly correlated with total solar irradiance and which show an unexplained linear trend in the residuals of a multiple regression.

Jones, Harrison P.↗
NASA NTRS1979

Correlation of predicted and measured thermal stresses on an advanced aircraft structure with dissimilar materials

Additional information was added to a growing data base from which estimates of finite element model complexities can be made with respect to thermal stress analysis. The manner in which temperatures were smeared to the finite element grid points was examined from the point of view of the impact on thermal stress calculations. The general comparison of calculated and measured thermal stresses is guite good and there is little doubt that the finite element approach provided by NASTRAN results in correct thermal stress calculations. Discrepancies did exist between measured and calculated values in the skin and the skin/frame junctures. The problems with predicting skin thermal stress were attributed to inadequate temperature inputs to the structural model rather than modeling insufficiencies. The discrepancies occurring at the skin/frame juncture were most likely due to insufficient modeling elements rather than temperature problems.

Jenkins, J. M.↗
NASA NTRS2009

Astronaut Thermal Exposure: Re-Entry After Low Earth Orbit Rescue Mission

The STS-125 mission, launched May 11, 2009, is the final servicing mission to the Hubble Space Telescope. The repair mission's EVA tasks are described, including: installing a new wide field camera; installing the Cosmic Origins Spectrograph; repairing the Space Telescope Imaging Spectrograph; installing a new outer blanket layer; adding a Soft Capture and Rendezvous System for eventual controlled deorbit in about 2014; replacing the 'A' side Science Instrument Command and Data Handling module; repairing the Advanced Camera for surveys; and, replacing the rate sensor unit gyroscopes, fine guidance sensors and 3 batteries. Additionally, the Shuttle crew cabin thermal environment is described. A CFD model of per person CO2 demonstrates a discrepancy between crew breathing volume and general mid-deck levels of CO2. A follow-on CFD analysis of the mid-deck temperature distribution is provided. Procedural and engineering mitigation plans are presented to counteract thermal exposure upon reentry to the Earth atmosphere. Some of the procedures include: full cold soak the night prior to deorbit; modifying deck stowage to reduce interference with air flow; and early securing of avionics post-landing to reduce cabin thermal load prior to hatch opening. Engineering mitigation activities include modifying the location of the aft starboard ICUs, eliminating the X3 stack and eliminating ICU exhaust air directed onto astronauts; improved engineering data of ICU performance; and, verifying the adequacy of mid-deck temperature control using CFD models in addition to lumped parameter models. Post-mitigation CFD models of mid-deck temperature profiles and distribution are provided.

Gillis, David B.↗
NASA NTRS2020

Radiative Heating from Biomass Burning Aerosol and its Impact on Cloud Structure in the Southeast Atlantic

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. The observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site. Due to documented discrepancies in the single scatter albedo (SSA) between models and observations, further sensitivity experiments will demonstrate the importance of the optical properties of biomass burning aerosol in accurately representing heating within the column. Finally, the heating rates will be put into context of the cloud structure over the site from the perspective of the mass flux closure from the University of Washington shallow convective scheme.

Collow, Allison↗
NASA NTRS1988

X-band noise temperature near the Sun at a 34-meter high efficiency antenna

The X-band system noise temperature near the Sun was measured at the DSS 15, a 34 meter high efficiency (HEF) antenna, in November 1987. Data was taken at angles off the center of the Sun from 0 to 4 degrees. At angles greater than 0.5 degree, the measured results agree with Voyager tracking data taken at solar conjunction in late December 1987. Within the solar disk, at angles lower than 0.27 degree, the temperature measured was lower than the prediction of a model by 30 percent, after adjusting for known receiver nonlinearities. The discrepancy in this extreme case is probably caused by unknown nonlinearities in the receiver, uncertainties in the model, or both. The measurement is nevertheless credible for practically all Sun-Earth-probe angles of interest to deep space missions.

Rebold, T. A.↗
NASA NTRSDate not supplied

Lapse-Rate Feeback: The Key to Reconciling TOA and Surface Attributions of Surface Warming

The impact of climate feedbacks on surface warming is conventionally evaluated using a decomposition of the top-of-atmosphere (TOA) energy budget. Alternatively, the climate feedback analysis can also be carried out using the surface energy budget. However, the two perspectives do not provide the same interpretation of process contributions to surface warming, particularly when executing a spatial analysis. The TOA energy budget is equal to the sum of the surface and atmospheric energy budgets. Using the CMIP5 RCP 8.5 model projections, we show that the major discrepancies between the surface and TOA climate feedback attributions of surface warming are due to non-negligible changes in the atmospheric energy budget that differ from their counterparts at the surface. Individual radiative and non-radiative processes cause vertically non-uniform energy flux perturbations, in response to an external forcing, that naturally lead to a vertically non-uniform temperature change. The TOA lapse-rate feedback is the manifestation of these multiple processes that produce a vertically non-uniform warming response such that it accounts for the asymmetry between the changes in the atmospheric and surface energy budgets. Using the climate feedback-response analysis method, we can decompose the lapse-rate feedback into contributions by individual processes. The negative lapse-rate feedback in the tropics is due to greater moist convection and condensational heating along with ocean heat storage. On the other hand, the positive lapse-rate feedback in polar regions is primarily due to the surface albedo and water vapor feedbacks. Combining the process contributions that are hidden within the lapse-rate feedback with their respective direct impacts on the TOA energy budget allows for a very consistent picture of process contributions to surface warming and its inter-model spread as that given by the surface energy budget approach. With the modified approach, both perspectives indicate water vapor feedback is the largest contributor in the tropics, while surface albedo feedback is the greatest contributor in polar regions. Dynamics and ocean heat storage are the main suppressors of surface warming, except over Antarctica. Both perspectives show there is large inter-model uncertainty in the contributions of water vapor, clouds, albedo, and dynamics plus ocean heat storage.

Sergio A Sejas↗