Keynote address
Approved and projected probe mission strategies for the outer planet exploration programs are briefly outlined.
Herman, D.↗
SEARCH · Search NASA
Results for “outer planet missions”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Improved planetary orbit mission capabilities in the Shuttle era by use of space-storable propulsion systems
Planetary-orbit mission capabilities will be greatly improved by the advent of space-storable retropropulsion systems with liquid fluorine and hydrazine as bipropellants even when the Shuttle/Tug is used as launch vehicle. Having a specific impulse as large as 375 sec, a multimission propulsion module using space-storable propellants with Pioneer or Mariner spacecraft as payload can perform Mercury, Saturn, and Uranus orbiter missions, and even some comet rendezvous missions, more cost effectively and flexibly than one using earth-storable propellants. It also can reduce trip time to the outer planets significantly. This paper presents mission requirements, technology status, system design and performance, development schedules, and costs based on data derived in a recent design and feasibility study.
Meissinger, H. F.↗
Reliability considerations in long-life outer planet spacecraft system design
A Mariner Jupiter/Saturn mission has been planned for 1977. System reliability questions are discussed, taking into account the actual and design lifetime, causes of mission termination, in-flight failures and their consequences for the mission, and the use of redundancy to avoid failures. The design process employed optimizes the use of proven subsystem and system designs and then makes the necessary improvements to increase the lifetime as required.
Casani, E. K.↗
Mission design for the low-cost Mariner Mark II missions
Mariner Mark II is a program of missions, now under study at JPL, which will maximize scientific return at substantially reduced cost. There will be 3 to 5 missions in the program investigating comets, asteroids, the outer planets and their satellites, and Mars in the 1990s. Mission opportunities for these targets in this time period are described in terms of launch vehicle, propulsion, and flight time requirements, as well as other mission constraints such as margin and launch period objectives. Example encounter designs as well as mission launch scenarios are also described.
Wallace, R. A.↗
Reliability estimation procedures and CARE: The Computer-Aided Reliability Estimation Program
Ultrareliable fault-tolerant onboard digital systems for spacecraft intended for long mission life exploration of the outer planets are under development. The design of systems involving self-repair and fault-tolerance leads to the companion problem of quantifying and evaluating the survival probability of the system for the mission under consideration and the constraints imposed upon the system. Methods have been developed to (1) model self-repair and fault-tolerant organizations; (2) compute survival probability, mean life, and many other reliability predictive functions with respect to various systems and mission parameters; (3) perform sensitivity analysis of the system with respect to mission parameters; and (4) quantitatively compare competitive fault-tolerant systems. Various measures of comparison are offered. To automate the procedures of reliability mathematical modeling and evaluation, the CARE (computer-aided reliability estimation) program was developed. CARE is an interactive program residing on the UNIVAC 1108 system, which makes the above calculations and facilitates report preparation by providing output in tabular form, graphical 2-dimensional plots, and 3-dimensional projections. The reliability estimation of fault-tolerant organization by means of the CARE program is described.
Mathur, F. P.↗
Power conditioning equipment for a thermoelectric outer planet spacecraft, volume 1, book 1
Equipment was designed to receive power from a radioisotope thermoelectric generator source, condition, distribute, and control this power for the spacecraft loads. The TOPS mission, aimed at a representative tour of the outer planets, would operate for an estimated 12 year period. Unique design characteristics required for the power conditioning equipment results from the long mission time and the need for autonomous on-board operations due to large communications distances and the associated time delays of ground initiated actions. The salient features of the selected power subsystem configuration are: (1) The PCE regulates the power from the radioisotope thermoelectric generator power source at 30 vdc by means of a quad-redundant shunt regulator; (2) 30 vdc power is used by certain loads, but is more generally inverted and distributed as square-wave ac power; (3) a protected bus is used to assure that power is always available to the control computer subsystem to permit corrective action to be initiated in response to fault conditions; and (4) various levels of redundancy are employed to provide high subsystem reliability.
Andrews, R. E.↗
Interplanetary navigation through the year 2005 - The inner solar system
A diverse collection of unmanned missions to explore the inner planets, outer planets, and small bodies of the solar system is being considered by the National Aeronautics and Space Administration for the remainder of this century and beyond. This paper describes the key navigational problems which are anticipated for some of these missions and the techniques which are likely to be used to solve these problems. Emphasis in this paper is placed on those missions which take place entirely within about 2 Astronomical Units of the sun. The missions studied include Orbiters of Venus, Mars, the moon, and an earth-approaching asteroid, probes of the atmosphere of Venus and the surface of Mars, fast flybys of comets, and sample return missions from Mars and a short-period comet.
Wood, L. J.↗
MW-Class Electric Propulsion System Designs
Electric propulsion systems are well developed and have been in commercial use for several years. Ion and Hall thrusters have propelled robotic spacecraft to encounters with asteroids, the Moon, and minor planetary bodies within the solar system, while higher power systems are being considered to support even more demanding future space science and exploration missions. Such missions may include orbit raising and station-keeping for large platforms, robotic and human missions to near earth asteroids, cargo transport for sustained lunar or Mars exploration, and at very high-power, fast piloted missions to Mars and the outer planets. The Advanced In-Space Propulsion Project, High Efficiency Space Power Systems Project, and High Power Electric Propulsion Demonstration Project were established within the NASA Exploration Technology Development and Demonstration Program to develop and advance the fundamental technologies required for these long-range, future exploration missions. Under the auspices of the High Efficiency Space Power Systems Project, and supported by the Advanced In-Space Propulsion and High Power Electric Propulsion Projects, the COMPASS design team at the NASA Glenn Research Center performed multiple parametric design analyses to determine solar and nuclear electric power technology requirements for representative 300-kW class and pulsed and steady-state MW-class electric propulsion systems. This paper describes the results of the MW-class electric power and propulsion design analysis. Starting with the representative MW-class vehicle configurations, and using design reference missions bounded by launch dates, several power system technology improvements were introduced into the parametric COMPASS simulations to determine the potential system level benefits such technologies might provide. Those technologies providing quantitative system level benefits were then assessed for technical feasibility, cost, and time to develop. Key assumptions and primary results of the COMPASS MW-class electric propulsion power system study are reported, and discussion is provided on how the analysis might be used to guide future technology investments as NASA moves to more capable high power in-space propulsion systems.
LaPointe, Michael R.↗
Heat Flux and Pressure Envelope Expansion Tests of Phenolic Impregnated Carbon Ablator (PICA)
Phenolic Impregnated Carbon Ablator (PICA) is a frequently employed thermal protection system (TPS) material in the space flight community. First flown on the forebody of Stardust, which re-entered in January of 2006, PICA has been the go-to material system for each successive Martian rover mission. This legacy continues with PICA domestic (PICA-D) baselined for the Mars Sample Retrieval Lander (SRL) and Dragon-fly, a mission to Titan’s surface. In mission planning, the capability of a TPS material system is restricted to environments that are proven through ground testing or flight missions. De-spite the range of destinations from Earth return to Mars entry to Saturn moons, PICA’s demonstrated capability currently covers heating rates less than 1800 W/cm2 and surface pressures less than 150 kPa [1]. These recognized limitations prevent PICA for consideration in direct entry applications at Venus, the outer planets, and high mass return missions at Earth, thus requiring selecting higher density materials [2].
PICA Arc-jet Testing Envelope↗
Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions
The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (~40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term; (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term; and (3) Heavy mass and human missions to Mars in the long term.
Venkatapathy, Ethiraj↗
Performance Testing of Yardney Li-Ion Cells and Batteries in Support of Future NASA Missions
NASA requires lightweight rechargeable batteries for future missions to Mars and the outer planets that are capable of operating over a wide range of temperatures, with high specific energy and energy densities. Due to the attractive performance characteristics, Li-ion batteries have been identified as the battery chemistry of choice for a number of future applications. For example, JPL is planning to launch another unmanned rover mission to the planet Mars. This mission, referred to as the Mars Science Laboratory (MSL), will involve the use of a rover that is much larger than the previously developed Spirit and Opportunity Rovers for the 2003 Mars Exploration Rover (MER) mission, that are currently still in operation on the surface of the planet after more than five years. Part of the reason that the MER rovers have operated so successfully, far exceeding the required mission duration of 90 sols, is that they possess robust Li-ion batteries, manufactured by Yardney Technical Products, which have demonstrated excellent life characteristics. Given the excellent performance characteristics displayed, similar Li-ion batteries have been projected to successfully meet the mission requirements of the up-coming MSL mission. In addition to future missions to Mars, Li-ion technology is attractive for a number of other future NASA applications which require high specific energy, rechargeable batteries. To ascertain the viability of using Li-ion batteries for these applications, a number of performance validation tests have been performed on both Yardney cells and batteries of various sizes. These tests include mission simulation tests, charge and discharge rate characterization testing, cycle life testing under various conditions, and storage testing.
Smart, M. C.↗
Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions
The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (approximately 40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low-mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term and (3) Heavy mass and human missions to Mars in the long term.
Venkatapathy, E.↗
MW-Class Electric Propulsion System Designs for Mars Cargo Transport
Multi-kilowatt electric propulsion systems are well developed and have been used on commercial and military satellites in Earth orbit for several years. Ion and Hall thrusters have also propelled robotic spacecraft to encounters with asteroids, the Moon, and minor planetary bodies within the solar system. High power electric propulsion systems are currently being considered to support piloted missions to near earth asteroids, as cargo transport for sustained lunar or Mars exploration, and for very high-power piloted missions to Mars and the outer planets. Using NASA Mars Design Architecture 5.0 as a reference, a preliminary parametric analysis was performed to determine the suitability of a nuclear powered, MW-class electric propulsion system for Mars cargo transport. For this initial analysis, high power 100-kW Hall thrusters and 250-kW VASIMR engines were separately evaluated to determine optimum vehicle architecture and estimated performance. The DRA 5.0 cargo mission closed for both propulsion options, delivering a 100 t payload to Mars orbit and reducing the number of heavy lift launch vehicles from five in the baseline DRA 5.0 architecture to two using electric propulsion. Under an imposed single engine-out mission success criteria, the VASIMR system took longer to reach Mars than did the Hall system, arising from the need to operate the VASIMR thrusters in pairs during the spiral out from low Earth orbit.
Gilland, James H.↗
Lithium-ion cell technology demonstration for future NASA applications
NASA requires lightweight rechargeable batteries for future missions to Mars and the outer planets that are capable of operating over a wide range of temperatures, with high specific energy and energy densities. Due to their attractive performance characteristics, lithium-ion batteries have been identified as the battery chemistry of choice for a number of future applications, including planetary orbiters, rovers and landers. For example, under the Mars Surveyor Program MSP 01 lithium-ion batteries were developed by Lithion (each being 28 V, 25 Ah, 8-cells. and 9 kg) and fully qualified prior to mission cancellation. In addition to the requirement of being able to supply at least 90 cycles on the surface of Mars, the battery demonstrated operational capability (both charge and discharge) over a large temperature range (-2O'C to +4OoC), with tolerance to non-operational excursions to -30nd 50Currently, JPL is implementing lithium-ion technology on the 2003 Mars Exploration Rover (MER), which will be coupled with a solar array. This mission has similar performance requirements to that of the 2001 Lander in that high energy density and a wide operating temperature range are necessitated. In addition to planetary rover and lander applications, we are also engaged in determining the viability of using lithium-ion technology for orbiter applications that require exceptionally long life (>20,000 cydes at partial depth of discharge). To assess the viabili of lithium-ion cells for these applications, a number of performance characterization tests have been performed (at the cell and battery level) on state-of-art prototype lihium- ion cells, induding: assessing the cycle life performance (at varying DODs), life characteristics at extreme temperatures (< -10nd >+4OoC), rate capability as a function of temperature (-30' to 4OoC), pulse capability, self-discharge and storage characteristics, as well as, mission profile capability. This paper will describe the current and future NASA missions that are considering lithium ion batteries and will contain results of the cell testing conducted to-date to validate the technology for these missions.
lithium-ion batteries Mars landers Mars rovers↗
Uranus science planning
Recommendations for a 1979 Mariner Jupiter-Uranus mission are discussed with the possibility of launching the first outer planet atmospheric entry probe. Measurement categories considered for the mission include conducting imaging experiments, observations in both the IR and UV spectral range, experiments associated with magnetic fields, plasma, charged particles, and S- and X-band occultation measurements.
Moore, J.↗
Automated design of gravity-assist trajectories to Mars and the outer planets
In this paper, a new approach to planetary mission design is described which automates the search for gravity-assist trajectories. This method finds all conic solutions given a range of launch dates, a range of launch energies and a set of target planets. The new design tool is applied to the problems of finding multiple encounter trajectories to the outer planets and Venus gravity-assist trajectories to Mars. The last four-planet grand tour opportunity (until the year 2153) is identified. It requires an earth launch in 1996 and encounters Jupiter, Uranus, Neptune, and Pluto. Venus gravity-assist trajectories to Mars for the 30 year period 1995-2024 are examined. It is shown that in many cases these trajectories require less launch energy to reach Mars than direct ballistic trajectories.
Longuski, James M.↗
Interplanetary missions for the late twentieth century
A set of missions that is feasible during the remainder of this century and which will significantly contribute to our understanding of the solar system is presented. Targets include comets, asteroids, the outer planets and their satellites, and Mars. Mission opportunities for these targets are described in terms of launch vehicle, propulsion, and flight-time requirements, as well as other mission constraints such as launch payload margin and launch period objectives. Examples of encounter designs are also given.
Wallace, R. A.↗
Analysis of selected deep space missions
Task 1 of the NEW MOONS (NASA Evaluation With Models of Optimized Nuclear Spacecraft) study is discussed. Included is an introduction to considerations of launch vehicles, spacecraft, spacecraft subsystems, and scientific objectives associated with precursory unmanned missions to Jupiter and thence out of the ecliptic plane, as well as other missions to Jupiter and other outer planets. Necessity for nuclear power systems is indicated. Trajectories are developed using patched conic and n-body computer techniques.
West, W. S.↗