Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Particle migration in suspensions by thermocapillary or electrophoretic motion

Two problems of similar mathematical structure are presented: the thermocapillary motion of bubbles and the electrophoresis of colloidal particles. For both problems, it is shown that in a cloud of n particles surrounded by an infinite expanse of fluid, the velocity of each sphere under creeping flow conditions is equal to the velocity of an isolated particle, unchanged by interactions between the particles. However, when the cloud fills a container, conservation of mass shows that this result cannot continue to hold, and the average translational velocity must be calculated subject to a constraint on the mass flux. It is concluded that the average thermocapillary or electrophoretic translational velocity of a particle in the cloud is related to the effective conductivity of the cloud over the whole range of particle volume fractions, provided that the particles are identical, non-conducting and, for the thermocapillary problem, inviscid.

Acrivos, A.↗
NASA NTRS1990

Fine-tuning of process conditions to improve product uniformity of polystyrene particles used for wind tunnel velocimetry

Monodisperse polymer particles (having uniform diameter) were used for the last two decades in physical, biological, and chemical sciences. In NASA Langley Research Center monodisperse polystyrene particles are used in wind tunnel laser velocimeters. These polystyrene (PS) particles in latex form were formulated at the Engineering Laboratory of FENGD using emulsion-free emulsion polymerization. Monodisperse PS latices particles having different particle diameters were formulated and useful experimental data involving effects of process conditions on particle size were accumulated. However, similar process conditions and chemical recipes for polymerization of styrene monomer have often yielded monodisperse particles having varying diameters. The purpose was to improve the PS latex product uniformity by fine-tuning the process parameters based on the knowledge of suspension and emulsion polymerization.

Ray, Asit K.↗
NASA NTRS1991

Saltation threshold reduction due to the electrostatic agglomeration of fine particles

Particles between 80 and 110 microns in diameter are the most easily moved by the wind. As the particle size decreases below 60 microns, they are increasingly more difficult to move by surface winds, and a number of experiments were performed in an attempt to reduce the required wind velocity. These include: (1) the bombardment of a bed of fine particles by particles near the optimum size, the larger particles kicking the fine particles into the windstream where they are entrained; and (2) the electrostatic agglomeration of fine particles into sizes more easily saltated. The results of these experiments are discussed.

Leach, Rodman N.↗
NASA NTRS1991

Prompt arrival of solar energetic particles from far eastern events - The role of large-scale interplanetary magnetic field structure

Intensity-time profiles of solar energetic particle enhancements generally show an asymmetry with respect to the heliolongitude of the associated solar event. Particles arrive promptly from events to the west of an observer because of good magnetic connection, whereas particle enhancements from poorly connected eastern source regions usually show much slower onsets. However, some 15 percent of eastern events do show prompt onsets. Two prompt particle enhancements associated with eastern solar events are studied using data from the Goddard Space Flight Center instruments on the ISEE 3 and IMP 8 spacecraft. In both events the prompt particle onset was observed when the spacecraft were in a postshock plasma region, apparently within a magnetic bottle. It is suggested that the magnetic bottle extended back to the sun and served as a channel for fast particle propagation to the spacecraft. Particles accelerated at an expanding coronal shock initiated by the eastern event could be injected onto field lines in the foot of the bottle.

Richardson, I. G.↗
NASA NTRS1991

Geochemistry of 2-4-mm particles from Apollo 14 soil (14161) and implications regarding igneous components and soil-forming processes

The present paper describes the compositional systematics of 381 particles analyzed from 14161, which was taken near the lunar module as part of the bulk sample. Attention is given to the distribution of lithologies, based on petrographic examination and compositions determined by INAA, and to implications of the compositions of polymict particles regarding igneous precursors and soil-forming processes. It was found that the most abundant particles are the impact-melt lithologies and regolith and fragmental breccias. The mean composition of the entire suite of 2-4-mm particles differs from that of the associated less-than-1-mm fines by having higher concentrations of incompatible trace elements and Na2O, and a lower concentration of CaO. There is a subset of regolith breccia particles and agglutinates in the 2-4-mm particles that have nearly identical compositions and Is/FeO similar to those of the less-than-1-mm fines. It is suggested that these particles are constructional products formed from the local regolith rather than comminuted fragments of ancient regolith breccias.

Jolliff, B. L.↗
NASA NTRS1992

Electrostatic effects on dust particles in space

The star scanner of the Magellan spacecraft experienced operational anomalies continuously during Magellan's journey to Venus. These anomalies were attributed to the presence of dust particles in the vicinity of the spacecraft. The dust particles, which were originated from the surface of thermal blankets, were liberated when the electrostatic force acting on them was of sufficient magnitude. In order to verify this hypothesis, an experimental program was initiated to study the mechanisms responsible for the release of dust particles from a spacecraft surface. In the experiments, dust particles were immersed in a plasma and/or subjected to ultra-violet irradiation. Results showed that the charging state of a dust particle was strongly dependent on the environment, and the charge on a dust particle was approximately 10(exp 3) elementary charges. Consequently, in the space environment, electrostatic force could be the most dominant force acting on a dust particle.

Leung, Philip↗
NASA NTRS1991

The particle size of Martian aeolian dunes

The effective particle size of unconsolidated materials on the Martian surface can be determined from thermal inertia, due to a pore size dependence of thermal conductivity at Martian atmospheric pressures. Because dunes consist of a narrow range of well-sorted, unconsolidated particles, they provide for a test of the relationship between particle size and thermal inertia calculated from midinfrared emission data for the Martian surface. Two independent approaches are used. First, thermal inertia data indicate that Martian dunes have an average particle size of about 500 +/-100 microns, or medium to coarse sand. Second, expected dune particle sizes are determined from grain trajectory calculations and the particle size transition from suspension to saltation. On earth, the transition occurs for a grain when the ratio of the terminal fall velocity to the wind friction speed, u*(t) is near unity; for grains at u*(t) this occurs at about 52 microns. Terrrestrial dune sands have a mean of 250 microns and are composed entirely of grains greater than 52 microns. The corresponding Martian transition grain size is about 210 microns, suggesting that Martian dunes should be significantly coarser than terrestrial dunes. Grain saltation path length as a function of particle size also shows that, under Martian conditions, larger grains than on earth will become suspended. Both approaches indicate that Martian dune sand should be coarser than terrestrial dune sand. These results closely match the grain sizes determined from thermal inertia models, providing the first direct test of the validity of these models for actual Martian surface materials.

Edgett, Kenneth S.↗
NASA NTRS1992

A detailed petrological analysis of hydrated, low-nickel, nonchondritic stratospheric dust particles

A detailed petrological analysis of three low-Ni, K-bearing, nonchondritic stratospheric dust particles is performed, and these particles are compared to products of high-energy, explosive (Plinian-type) volcanic events. The analytical electron microscope (AEM) analyses show pervasive layer silicates, carbonate and goethite, and chemical fractionation in the matrix of these particles similar to hydrothermal alteration in volcanic ejecta. Along with low Ni content and the presence of potassium, the texture and mineralogy of particles L2001-18, L2001-20, and L2002 C2 are similar to at least two nonchondritic stratospheric dust particles of the igneous subgroup for which an extraterrestrial origin has been suggested based on their minor- and trace-element abundances. The petrological characteristics of some low-Ni, K-bearing nonchondritic stratospheric dust particles supports a probable terrestrial volcanic origin, but the AEM data alone cannot exclude an extraterrestrial origin for these particles.

Rietmeijer, Frans J. M.↗
NASA NTRS1993

Inward electrostatic precipitation of interplanetary particles

An inward precipitator collects particles initially dispersed in a gas throughout either a cylindrical or spherical chamber onto a small central planchet. The instrument is effective for particle diameters greater than about 1 micron. One use is the collection of interplanetary dust particles (IDPs) which are stopped in a noble gas (xenon) by drag and ablation after perforating the wall of a thin-walled spacecraft-mounted chamber. First, the particles are positively charged for several seconds by the corona production of positive xenon ions from inward facing needles placed on the chamber wall. Then an electric field causes the particles to migrate toward the center of the instrument and onto the planchet. The collection time (on the order of hours for a 1 m radius spherical chamber) is greatly reduced by the use of optimally located screens which reapportion the electric field. Some of the electric field lines terminate on the wires of the screens so a fraction of the total number of particles in the chamber is lost. The operation of the instrument is demonstrated by experiments which show the migration of carbon soot particles with radius of approximately 1 micron in a 5 cm diameter cylindrical chamber with a single field enhancing screen toward a 3.2 mm central collection rod.

Rulison, Aaron J.↗
NASA NTRS1993

Flow instability in particle-bed nuclear reactors

The particle-bed core offers mitigation of some of the problems of solid-core nuclear rocket reactors. Dividing the fuel elements into small spherical particles contained in a cylindrical bed through which the propellant flows radially, may reduce the thermal stress in the fuel elements, allowing higher propellant temperatures to be reached. The high temperature regions of the reactor are confined to the interior of cylindrical fuel assemblies, so most of the reactor can be relatively cool. This enables the use of structural and moderating materials which reduce the minimum critical size and mass of the reactor. One of the unresolved questions about this concept is whether the flow through the particle-bed will be well behaved, or will be subject to destructive flow instabilities. Most of the recent analyses of the stability of the particle-bed reactor have been extensions of the approach of Bussard and Delauer, where the bed is essentially treated as an array of parallel passages, so that the mass flow is continuous from inlet to outlet through any one passage. A more general three dimensional model of the bed is adopted, in which the fluid has mobility in three dimensions. Comparison of results of the earlier approach to the present one shows that the former does not accurately represent the stability at low Re. The more complete model presented should be capable of meeting this deficiency while accurately representing the effects of the cold and hot frits, and of heat conduction and radiation in the particle-bed. It can be extended to apply to the cylindrical geometry of particle-bed reactors without difficulty. From the exemplary calculations which were carried out, it can be concluded that a particle-bed without a cold frit would be subject to instability if operated at the high temperatures desired for nuclear rockets, and at power densities below about 4 megawatts per liter. Since the desired power density is about 40 megawatts per liter, it can be concluded that operation at design exit temperature but at reduced power could be hazardous for such a reactor. But the calculations also show that an appropriate cold frit could very likely cure the instability. More definite conclusions must await calculations for specific designs.

Kerrebrock, Jack L.↗
NASA NTRS1992

Direct simulation of particle dispersion in a decaying isotropic turbulence

Results of a numerical investigation of the dispersion of solid particles in decaying isotropic turbulence are presented. The 3D time-dependent velocity field of a homogeneous nonstationary turbulence is computed using the method of direct numerical simulation (DNS). The dispersion characteristics of three different solid particles (corn, copper, and glass) injected in the flow are obtained by integrating the complete equation of particle motion along the instantaneous trajectories of 22-cubed particles for each particle type, and then by performing ensemble averaging. Good agreement was achieved between the present DNS results and the measured time development of the mean-square displacement of the particles. Questions of how and why the dispersion statistics of a solid particle differ from those of its corresponding fluid point and surrounding fluid and what influences inertia and gravity have on these statistics are also discussed.

Elghobashi, S.↗
NASA NTRS1991

Seed particle response and size characterization in high speed flows

The response of seed particles ranging between 0.7 and 8.7 micron is determined using a phase Doppler particle analyzer which simultaneously measures particle size and velocity. The stagnant seed particles are entrained into a high speed free jet at velocities ranging from 40 to 300 m/s. The size-mean axial velocity correlation and size-rms velocity correlations are used to determine the particle response to the sudden acceleration. It was determined that at the lower speeds, seed particles up to approximately 5 microns are adequate, but as velocities approach 300 m/s only particles on the order of one micron are suitable. The ability to determine size and velocity simultaneously is essential if seeding with polydispersions is used since it allows the rejection of data which will not accurately represent the flow field.

Rudoff, Roger C.↗
NASA NTRS1993

Particle sightings by the infrared telescope on Spacelab 2

Part of the objective of the cooled infrared telescope on Spacelab 2 was to determine the particle environment around the Space Shuttle. The telescope scanned the sky in six wavelength bands ranging from 2 to 100 microns with high time resolution. Dust particles could be identified from their particular signature in the data stream. Particle data from about 4 h early in the mission were analyzed in terms of size, color temperature, velocity, and time. The 1100 particles that were seen were slow moving and ranged in color temperature from 190 to 350 K with a few much hotter. The minimum detectable diameter is between 5 and 13 microns, depending on temperature. The size distribution resembles sample distributions collected at a Shuttle preparation facility. Although particle detection rates varied widely with time, no specific events were identified to be associated with particle production. It was not possible to determine the particle composition, although it was probably not ice.

Simpson, J. P.↗
NASA NTRS1993

The kinetics of composite particle formation during mechanical alloying

The kinetics of composite particle formation during attritor milling of insoluble binary elemental powders have been examined. The effects of processing conditions (i.e., mill power, temperature, and charge ratio) on these kinetics were studied. Particle size distributions and fractions of elemental and composite particles were determined as functions of milling time and processing conditions. This allowed the deduction of phenomenological rate constants describing the propensity for fracture and welding during processing. For the mill-operating conditions investigated, the number of particles in the mill generally decreased with milling time, indicating a greater tendency for particle welding than fracture. Moreover, a bimodal size distribution is often obtained as a result of preferential welding. Copper and chromium 'alloy' primarily by encapsulation of Cr particles within Cu. This form of alloying also occurs in Cu-Nb alloys processed at low mill power and/or for short milling times. For other conditions, however, Cu-Nb alloys develop a lamellar morphology characteristic of mechanically alloyed two-phase ductile metals. Increasing mill power or charge (ball-to-powder weight) ratio (CR) increases the rate of composite particle formation.

Aikin, B. J. M.↗
NASA NTRS1993

Carbon abundance and silicate mineralogy of anhydrous interplanetary dust particles

We have studied nineteen anhydrous chondritic interplanetary dust particles (IDPs) using analytical electron microscopy. We have determined a method for quantitative light element EDX analysis of small particles and have applied these techniques to a group of IDPs. Our results show that some IDPs have significantly higher bulk carbon abundances than do carbonaceous chondrites. We have also identified a relationship between carbon abundance and silicate mineralogy in our set of anhydrous IDPs. In general, these particles are dominated by pyroxene, olivine, or a subequal mixture of olivine and pyroxene. The pyroxene-dominated IDPs have a higher carbon abundance than those dominated by olivines. Members of the mixed mineralogy IDPs can be grouped with either the pyroxene- or olivine-dominated particles based on their carbon abundance. The high carbon, pyroxene-dominated particles have primitive mineralogies and bulk compositions which show strong similarities to cometary dust particles. We believe that the lower carbon, olivine-dominated IDPs are probably derived from asteroids. Based on carbon abundances, the mixed-mineralogy group represents particles derived from either comets or asteroids. We believe that the high carbon, pyroxene-rich anhydrous IDPs are the best candidates for cometary dust.

Thomas, Kathie L.↗
NASA NTRS1992

Particle acceleration in cosmic plasmas; Proceedings of the Workshop, Bartol Research Inst., Newark, DE, Dec. 4-6, 1991

The present volume on particle acceleration in cosmic plasmas discusses transport theory, particle acceleration in the sun, heliosphere, and galaxy, particle acceleration at nonrelativistic shocks, and stochastic particle acceleration. Attention is given to particle acceleration in relativistic flows and shocks, simulations, composition and sources of high-energy cosmic rays, electron acceleration, and observation priorities and perspectives. Topics addressed include particle acceleration in the magnetosphere, particle transport from a turbulence perspective, numerical simulations of time-dependent cosmic ray mediated shocks, and solar flare plasma. Also discussed are relativistic shock waves and the excitation of plerions, ion acceleration at collisionless shock interactions, ultrahigh-energy cosmic rays from Fanaroff Riley, and constraints on electron acceleration in the Crab Nebula.

Zank, G. P.↗
NASA NTRS1993

Smoothed particle hydrodynamics with GRAPE-1A

We describe the implementation of a smoothed particle hydrodynamics (SPH) scheme using GRAPE-1A, a special-purpose processor used for gravitational N-body simulations. The GRAPE-1A calculates the gravitational force exerted on a particle from all other particles in a system, while simultaneously making a list of the nearest neighbors of the particle. It is found that GRAPE-1A accelerates SPH calculations by direct summation by about two orders of magnitudes for a ten thousand-particle simulation. The effective speed is 80 Mflops, which is about 30 percent of the peak speed of GRAPE-1A. Also, in order to investigate the accuracy of GRAPE-SPH, some test simulations were executed. We found that the force and position errors are smaller than those due to representing a fluid by a finite number of particles. The total energy and momentum were conserved within 0.2-0.4 percent and 2-5 x 10 exp -5, respectively, in simulations with several thousand particles. We conclude that GRAPE-SPH is quite effective and sufficiently accurate for self-gravitating hydrodynamics.

Umemura, Masayuki↗
NASA NTRS1993

Feasibility study: Monodisperse polymer particles containing laser-excitable dyes

The optical properties associated with small particles, which include aerosols, hydrosols and solid microspheres have an impact on several areas of science and engineering. Since the advent of high-speed computers and lasers, the interaction of light with matter in the form of small particles with a discontinuous optical boundary relative to the surroundings has been much better understood. Various nonlinear optical effects have been observed involving interaction of a laser beam with both solid microspheres and liquid microdroplets. These include observation of second and third harmonic generation, four wave mixing, optical visibility, two photon absorption, observation of stimulated emission and lasing, and Stimulated Raman Scattering. Many of these effects are observed with laser intensities which are orders of magnitude less than that required by threshold condition for interactions in macroscopic bulk medium. The primary reason for this is twofold. The front surface of the microsphere acts as a thick lens to enhance the internal intensity of the input laser radiation, and the spherical shape of the droplet acts as an optical cavity to provide feedback at specific wavelengths corresponding to the whispering gallery modes or the morphology dependent resonances (MDR's). The most interesting and significant recent finding in this field is undoubtedly the existence of resonance peaks in linear and nonlinear optical spectra. Such resonance peaks are only dependent on the particle morphology, which means the size, shape and refractive index of the particle. Because of the simultaneous presence of these resonances, they have been referred to by many names, including structural resonances, whispering modes or whispering gallery modes, creeping waves, circumferential waves, surfaces modes, and virtual modes. All of these names refer to the same phenomena, i.e. morphology dependent resonances (MDR's) which has already been described and predicted precisely by electromagnetic theory and Loentz-Mie theory since 1908. MDR's can become important when the particle size (radius a) approaches and exceeds the wavelength of the electromagnetic wave (lambda) and the refractive index of the particle is greater than that of the surrounding medium. Such resonances are easiest to observe from a single particle with high symmetry, such as a sphere, spheroid, or cylinder. MDR's correspond to solutions of the characteristic equations of the electromagnetic fields in the presence of a sphere.

Venkateswarlu, Putcha↗