Search NASA⌕ Search

SEARCH · Search NASA

Results for “permitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Preliminary feasibility study of a multi-Phobos encounter experiment during the Viking extended mission

The Viking '75 Mission to Mars is reported which permits a truly unique opportunity to explore the natural satellite, Phobos, from distances measured in tens of kilometers. A preliminary feasibility study has been made which shows that a science mission involving a Phobos close encounter is technically feasible and within the capabilities of the current Viking design. For less than 20 m/s, the Viking Orbiter can provide approximately two 40-day periods of close observation of Phobos, with the first encounter period in January and the second in March, 1977. Multi-pass images of the entire satellite from nearly all aspect angles and with resolution on the order of 10 meters are possible. Close encounters will permit mass determinations to an accuracy of tens of percent. These experiments can be performed in series with the nominal mission; thus, providing complementary scientific information without compromising the original mission and science objectives.

Tolson, R. H.↗
NASA NTRS1973

Design study of RL10 derivatives. Volume 3, part 2: Operational and flight support plan

Transportation requirements are considered during the engine design layout reviews and maintenance engineering analyses. Where designs cannot be influenced to avoid transportation problems, the transportation representative is advised of the problems permitting remedies early in the program. The transportation representative will monitor and be involved in the shipment of development engine and GSE hardware between FRDC and vehicle manufacturing plant and thereby will be provided an early evaluation of the transportation plans, methods and procedures to be used in the space tug support program. Unanticipated problems discovered in the shipment of development hardware will be known early enough to permit changes in packaging designs and transportation plans before the start of production hardware and engine shipments. All conventional transport media can be used for the movement of space tug engines. However, truck transport is recommended for ready availability, variety of routes, short transit time, and low cost.

Shubert, W. C.↗
NASA NTRS1973

New sensor on NOAA-2 satellite monitors the 1972-73 Great Lakes ice season

The NOAA-2 satellite was launched Oct. 15, 1972 in a 790 nautical mile-high near-polar sun-synchronous orbit. The Very High Resolution Radiometer (VHRR) views earth in both the visible and thermal-IR regions of the electromagnetic spectrum at 1-kilometer resolution. Its orbit permits the satellite to acquire imagery on a daily basis over any given location at approximately 0900 and 2100 local time. Visible data at 1-kilometer resolution represents a 16-fold increase in data density over previous NOAA satellite capabilities. Thermal data are now available over an area at 100 times the previous NOAA-1 thermal data density. Following the onset of ice formation in Lake Erie early in January, ice buildup and thaw were observed as cloud cover permitted throughout the short winter season.

Strong, A. E.↗
NASA NTRS1974

A synthesis theory for self-oscillating adaptive systems /SOAS/

A quantitative synthesis theory is presented for the Self-Oscillating Adaptive System (SOAS), whose nonlinear element has a static, odd character with hard saturation. The synthesis theory is based upon the quasilinear properties of the SOAS to forced inputs, which permits the extension of quantitative linear feedback theory to the SOAS. A reasonable definition of optimum design is shown to be the minimization of the limit cycle frequency. The great advantages of the SOAS is its zero sensitivity to pure gain changes. However, quasilinearity and control of the limit cycle amplitude at the system output, impose additional constraints which partially or completely cancel this advantage, depending on the numerical values of the design parameters. By means of narrow-band filtering, an additional factor is introduced which permits trade-off between filter complexity and limit cycle frequency minimization.

Horowitz, I.↗
NASA NTRS1975

An improved numerical procedure for the parametric optimization of three dimensional scramjet nozzles

A parametric numerical procedure permitting the rapid determination of the performance of a class of scramjet nozzle configurations is presented. The geometric complexity of these configurations ruled out attempts to employ conventional nozzle design procedures. The numerical program developed permitted the parametric variation of cowl length, turning angles on the cowl and vehicle undersurface and lateral expansion, and was subject to fixed constraints such as the vehicle length and nozzle exit height. The program required uniform initial conditions at the burner exit station and yielded the location of all predominant wave zones, accounting for lateral expansion effects. In addition, the program yielded the detailed pressure distribution on the cowl, vehicle undersurface and fences, if any, and calculated the nozzle thrust, lift and pitching moments.

Dash, S.↗
NASA NTRS1975

A g-load display for remotely piloted vehicles and other aircraft that are subject to maneuvering constraints

The absence of kinesthetic cues deprives RPV pilots of essential feedback, particularly during high speed maneuvers. A display was designed to facilitate pilot control of g loads and to permit an immediate indication of g-load constraint violations. The display embodies all the motion vector components that contribute to maneuvering accelerations. In one mode of operation, the device displays the components of angular velocity as variable length pointers emanating from the center of a circle whose radius is determined by the linear velocity of the vehicle. An alternative mode of operation permits the pilot to select a display in which g loads are presented directly as variable length pointers emanating from the center of a circle whose radius is again determined by the linear velocity of the vehicle. Each circle defines a safe region of operation, and penetration of the circumference of the appropriate circle by a pointer implies that the structural design load was exceeded.

Howard, J. C.↗
NASA NTRS1975

Special report: Occlusive cuff controller

A mechanical occlusive cuff controller suitable for blood flow experiments in space shuttle flights is described. The device requires 115 volt ac power and a pressurized gas source. Two occluding cuff pressures (30 and 50 mmHg) are selectable by a switch on the front panel. A screw driver adjustment allows accurate cuff pressurization levels for under or oversized limbs. Two pressurization cycles (20 second and 2 minutes) can be selected by a front panel switch. Adjustment of the timing cycles is also available through the front panel. A pushbutton hand switch allows remote start of the cuff inflation cycle. A stop/reset switch permits early termination of the cycle and disabling of the controller to prevent inadvertent reactivation. Pressure in the cuff is monitored by a differential aneroid barometer. In addition, an electrocardiogram trigger circuit permits the initiation of the pressurization cycle by an externally supplied ECG cycle.

Baker, J. T.↗
NASA NTRS1975

Phobos and Deimos encounter experiment during the Viking extended mission

The Viking '75 Mission to Mars permits a truly unique opportunity to explore the natural satellites, Phobos and Deimos, from distances measured in the tens of kilometers. Because of the particular orbital geometry currently planned for the Viking Mission, the Viking spacecraft can be maneuvered to make repeated passes very close to Phobos and Deimos during the proposed extended mission phase. Multipass images of both satellites will cover approximately 75% of Phobos and 50% of Deimos. Resolution on the order of 50 meters is possible. Close encounters will permit mass determination to an accuracy of tens of percent. A preliminary feasibility study has been made which shows that the propulsive requirements are nominal, the orbit determination accuracy is adequate, and the satellites are within the scan platform pointing capability during portions of each encounter.

Tolson, R. H.↗
NASA NTRS1974

The neutral atmosphere temperature experiment

The AEROS Neutral Atmosphere Temperature Experiment (NATE) is designed to measure the kinetic temperature of molecular nitrogen in the thermosphere. A quadrupole mass spectrometer tuned to N2 measures the N2 density variation in a small spherical antechamber having a knife-edged orifice which is exposed to the atmosphere at the outer surface of the spacecraft. The changing density of N2 due to the spinning motion of the spacecraft permits determination of the velocity distribution of the N2 from which the temperature is calculated. An alternate mode of operation of the instrument allows measurement of the other gases in the atmosphere as well as N2 permitting determination of the neutral particle composition of the atmosphere.

Spencer, N. W.↗
NASA NTRS1974

Transmitter efficiency considerations in MAPSK signal selection

A simple model of the efficiency-power relationship for a microwave transmitter permits comparison of M-ary amplitude and phase shift keyed (MAPSK) signal array performance on the basis of average DC power in, rather than average RF signal power out. This is of interest in comparing MAPSK arrays with comparable polyphase, since the polyphase transmitter is operated at a single power level, while MAPSK varies over a range of power levels, each of differing efficiency. A constant efficiency-power curve permits comparison of signal arrays in terms of array average power, while a linear curve requires comparison on the basis of array peak power. Since typical efficiency curves will lie between these extremes, the array peak and average power levels provide bounds on array requirements for average DC input power. Examination of the performance of several MAPSK sets reveals a distinct power advantage of quadrature amplitude shift keying (QASK) over most viable signal sets.

Smith, J. G.↗
NASA NTRS1975

Short-periodic variations and second-order numerical averaging

The principal disadvantage of the method of numerical averaging is that it provides only the average time history of the orbital elements and yields no information about the high-frequency or short-periodic variations that occur inside the averaging interval. This paper contains a description of a technique for recovering the short-periodic variations by minor modifications to the averaging process so as to permit the construction of a Fourier series for the osculating elements. The availability of this series permits the extension of the averaging technique to higher order and allows us to account for short-periodic coupling of the perturbations. Comparisons of the results with numerically integrated solutions are presented for three distinct orbit prediction problems.

Lutzky, D.↗
NASA NTRS1974

Optimal detumbling of a large manned spacecraft using an internal moving mass

This investigation deals with the use of a movable mass control system to stabilize a tumbling asymmetric spacecraft about the maximum inertia axis. A first-order gradient optimization technique is used to minimize angular velocity components along the intermediate and minimum inertia axes, thus, permitting a wide range of initial guesses for mass position history. Motion of the control mass is along a linear track fixed in the vehicle. The control variable is taken as mass acceleration with respect to body coordinates. Motion is limited to defined quantities and a penalty function is used to insure a given range of positions. Numerical solutions of the optimization equations verify that minimum time detumbling is achieved with the largest permissible movable mass, length of linear track, and positions of the mass on the two coordinates perpendicular to the linear motion. The optimal method permits detumbling in about one-fourth the time when compared to a force control law formulation available in the literature.

Kunciw, B. G.↗
NASA NTRS1975

Apparatus for production, measurement and reaction studies of dissociated gases at elevated temperatures

An apparatus is described which is used for the controlled production, characterization, and study of dissociated gases in a microwave discharge at elevated temperatures. A unique feature is the ability to produce and study a microwave discharge plasma in the heated zone. This allows elevated temperature reactions to be studied in high concentrations of dissociated gases. Further, the system permits weight change measurements of specimens in the plasma, thus facilitating reaction rate determinations. Included is a description of a cavity for use on a 50-mm diameter cylindrical reactor. The effects of flow rate, pressure, temperature, power, metal sample, and sampling position on dissociation percentage of oxygen in the apparatus are described as well as a technique for sample temperature measurements in the plasma which permits determination of high temperature recombination coefficients and reaction rates.

Christian, J. D.↗
NASA NTRS1975

The Skylab sleep monitoring experiment - Methodology and initial results

The sleep monitoring experiment permitted an objective evaluation of sleep characteristics during the first two manned Skylab flights. Hardware located onboard the spacecraft accomplished data acquisition, analysis, and preservation, thereby permitting near-real-time evaluation of sleep during the flights and more detailed postmission analysis. The crewman studied during the 28-Day Mission showed some decrease in total sleep time and an increase in the percentage of Stage 4 sleep, while the subject in the 59-Day Mission exhibited little change in total sleep time and a small decrease in Stage 4 and REM sleep. Some disruption of sleep characteristics was seen in the final days of both missions, and both subjects exhibited decreases in REM-onset latency in the immediate postflight period. The relatively minor changes seen were not of the type nor magnitude which might be expected to be associated with significant degradation of performance capability.

Frost, J. D., Jr.↗
NASA NTRS1975

Inlet performance of the integrated Langley scramjet module

The inlet concept for the Langley Scramjet Module has been developed and proven in Langley wind tunnels over a Mach number range from 2.3 to 6.0 (flight simulation of Mach 2.6 to 7.6). This modular engine concept is designed to integrate with the airframe, which results in precompression of the engine airflow by the vehicle bow shock and additional expansion of the nozzle exhaust gas by the afterbody of the vehicle. With these integration advantages, the inlet can be designed with modest contraction ratios and fixed geometry. Also, the module nozzle exit area can be equal to the capture area, which permits the cowl to be alined with the local flow producing minimum external drag. The inlet leading edges and planar compression surfaces are swept at 48 deg, which provides spillage at low Mach numbers for starting and which reduces the pressure gradient on the top surface to permit ingestion of the vehicle forebody boundary layer into the inlet without separating. Three fuel injection struts provide for the use of a short combustor having low internal cooling requirements. Schedules for mass capture ratio, contraction ratio, and total pressure recovery are well within the acceptable range for a good scramjet propulsion device. The fixed geometry, minimum external drag design has proven to be a practical, high-performance inlet concept.

Trexler, C. A.↗
NASA NTRS1975

Practical aspects of plasma processes in thermionic energy converters

Over a decade of cesium vapor thermionic converter research has yielded sufficient understanding of the basic plasma processes to permit application of this understanding to improvement of converter performance. A performance index is defined which relates such converter improvements directly to increases in system performance. A prime practical objective of current research is to reduce or eliminate the arc potential drop presently required to sustain the plasma in the ignited cesium diode. This will substantially increase the energy conversion efficiency, and will permit operation at substantially lower emitter temperatures without requiring lower collector (heat rejection) temperature. Present work is concentrating on evaluating and reducing to practice the several methods employing auxiliary ion sources to eliminate the arc drop which were demonstrated over a decade ago: i.e., various ignited and unignited triode concepts, and the pulse-enhanced diode and triode. These methods are reviewed in light of present understanding and recent experimental data.

Rasor, N. S.↗
NASA NTRS1975

Design of a video system providing optimal visual information for controlling payload and experiment operations with television

A program was conducted which included the design of a set of simplified simulation tasks, design of apparatus and breadboard TV equipment for task performance, and the implementation of a number of simulation tests. Performance measurements were made under controlled conditions and the results analyzed to permit evaluation of the relative merits (effectivity) of various TV systems. Burden factors were subsequently generated for each TV system to permit tradeoff evaluation of system characteristics against performance. For the general remote operation mission, the 2-view system is recommended. This system is characterized and the corresponding equipment specifications were generated.

Source record↗
NASA NTRS1975

Development and fabrication of improved Schottky power diodes

Reproducible methods for the fabrication of silicon Schottky diodes have been developed for tungsten, aluminum, conventional platinum silicide, and low temperature platinum silicide. Barrier heights and barrier lowering under reverse bias have been measured, permitting the accurate prediction of forward and reverse diode characteristics. Processing procedures have been developed that permit the fabrication of large area (about 1 sq cm) mesageometry power Schottky diodes with forward and reverse characteristics that approach theoretical values. A theoretical analysis of the operation of bridge rectifier circuits has been performed, which indicates the ranges of frequency and voltage for which Schottky rectifiers are preferred to p-n junctions. Power Schottky rectifiers have been fabricated and tested for voltage ratings up to 140 volts.

Cordes, L. F.↗