Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Advanced Analysis of X-ray Fluorescence Measurements of the Interfacial Density of Eu Ions at Liquid–Liquid Interfaces for Solvent Back-Extraction

X-ray fluorescence near total reflection (XFNTR) is the primary technique used to measure the element-specific interfacial density of ions at liquid−liquid interfaces. Fluorescence from ions in the bulk liquids can complicate the determination of the interfacial density; consequently, measurements have been previously limited to samples without ions in the upper phase and with concentrations on the order of 10 μM or less in the lower phase. We modify the analysis of XFNTR data to account for ions in both bulk phases, then demonstrate its use in the context of rare-earth separations processes. In a model of ion stripping (i.e., back-extraction), dodecane solutions of di(2-ethylhexyl)- phosphoric acid (HDEHP) loaded with Eu(III) at the 1 mM level are placed in contact with either pure water or aqueous solutions of nitric or citric acid at pH 3. XFNTR measurements of equilibrated, quiescent samples reveal that citric acid solutions produce a disproportionately large depletion of ions from the interface compared to that from the bulk organic solution, whereas stripping by pure water or nitric acid solutions is negligible. As a result, this advance in the methodology of XFNTR may have broad applicability to the investigation of metal ions in chemical and biological processes at liquid−liquid interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Transmission Electron Microscopy based Characterization of a U-20Pu-10Zr Fuel Irradiated in Experimental Breeder Reactor-II

U-Pu-Zr metallic fuels are important fuel candidate for future advanced and/or test reactors. To better understand fuel performance and guide future fuel development, a U-20Pu-10Zr (in weight) metallic fuel irradiated in the Experimental Breeder Reactor was revisited using advanced electron microscopies. This fuel was irradiated to a burnup of 7.6 % at a peak cladding temperature of 521 °C. In this research, several transmission electron microscopy samples were extracted from different but representative radial locations of the fuel cross section using focused ion beam technique. Phase identification and chemical analysis with sub-micron spatial resolution was carried out using scanning transmission electron microscopy. Multiple phenomena that are critical to fuel performance, such as Zr phase and its distribution in a different matrix, were revealed in an unpreceded and highly detailed manner. An improved understanding of fuel reconstruction in U-Pu-Zr metallic fuel under reactor irradiation is provided.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bimetallic Copper/Ruthenium/Osmium Complexes: Observation of Conformational Differences Between the Solution Phase and Solid State by Atomic Pair Distribution Function Analysis

High-energy X-ray scattering and pair distribution function analysis (HEXS/PDF) is a powerful method to reveal the structure of materials lacking long-range order, but is underutilized for molecular complexes in solution. Here we demonstrate the application of HEXS/PDF with 0.26 Å resolution to uncover the solution structure of five bimetallic Cu I /Ru II /Os II complexes. HEXS/PDF of each complex in acetonitrile solution confirms the pairwise distances in the local coordination sphere of each metal center as well as the metal...metal distances separated by over 12 Å. The metal…metal distance detected in solution is compared with that from the crystal structure and molecular models to confirm that distortions to the metal bridging ligand are unique to the solid state. This work presents the first example of observing sub-Ångström conformational differences by direct comparison of solution phase and solid-state structures and shows the potential for HEXS/PDF in the determination of solution structure of single molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In situ high-temperature X-ray diffraction study of Sc-doped titanium oxide nanocrystallites

Titanium dioxide is an inexpensive wide-gap highly ionic semiconductor with striking photocatalytic capabilities in several heterogeneous photoredox reactions. A small crystal size is desirable to maximize the surface area, since photocatalytic reactions occur at the surface of a photocatalyst. Presented in this work are the synthesis and microstructural characterization of 4 at.% Sc-doped TiO 2 (4SDT) prepared by water-based co-precipitation. The crystal structure of 4SDT was examined via in situ high-temperature powder X-ray diffraction experiments from 25 to 1200°C. Rietveld analysis revealed single-phase anatase up to 875°C, while at 900°C the anatase-to-rutile phase transformation occurred and at higher temperatures additional reflections of Sc-rich phases (Sc 2 TiO 5 from 975°C and Ti 3 Sc 4 O 12 or Sc 2 O 3 at 1200°C) were observed. Debye function analysis (DFA) was applied to model the total scattering pattern directly in reciprocal space, allowing the reconstruction of Ti vacancies. Both Rietveld and DFA methods were applied to estimate the nanocrystallite size and shape with consistent growth in crystallite size with temperature: an ellipsoid shape with equatorial ~4.7 nm / axial (001) ~6.9 nm at 25°C to equatorial ~27.9 nm / axial (001) ~39.6 nm at 900°C refined by Rietveld analysis, versus a cylinder shape with D a , b = 4.3 nm and size dispersion σ ab = 1.5 nm, L c = 4.9 nm and σ c = 2.3 nm at 25°C to D a , b = 21.4 nm, σ ab = 8.3 nm, L c = 23.9 and σ c = 10.9 nm at 900°C estimated by DFA. The microstructural changes obtained by Rietveld and DFA methods were supported by high-resolution transmission electron microscopy image analysis, as well as by the less direct nitrogen sorption techniques that provide information on the size of non-agglomerated and dense particles. The Ti site-occupancy factor showed a linear increase from 0.6–0.8 at 25°C to unity at 900°C for anatase, and from ~0.7 at 900°C to unity at 1200°C for rutile, via Rietveld analysis and DFA.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Summertime ozone pollution in China affected by stratospheric quasi-biennial oscillation

In recent years, the near-surface ozone (O 3 ) level has been rising fast in China, with increasing damage to human health and ecosystems. In this study, the impact of stratospheric quasi-biennial oscillation (QBO) on interannual variations in summertime tropospheric O 3 over China is investigated based on GEOS-Chem model simulations and satellite retrievals. QBO has a significant positive correlation with near-surface O 3 concentrations over central China (92.5–112.5° E, 26–38° N) when the sea surface temperature (SST) over the eastern tropical Pacific is warmer than normal, with a correlation coefficient of 0.53, but QBO has no significant effect on O 3 under the cold SST anomaly. Compared to the easterly phase of QBO, the near-surface O 3 concentrations have an increase of up to 3 ppb (5% relative to the average) over central China during its westerly phase under the warm SST anomaly. O 3 also increases above the surface and up to the upper troposphere, with a maximum increase of 2–3 ppb (3%–5%) in 850–500 hPa over central China when comparing westerly phase to easterly phase. Process-based analysis and sensitivity simulations suggest that the O 3 increase over central China is mainly attributed to the anomalous downward transport of O 3 during the westerly phase of QBO when a warm SST anomaly occurs in the eastern tropical Pacific, while the local chemical reactions and horizontal transport processes partly offset the O 3 increase. This work suggests a potentially important role of QBO and the related vertical transport process in affecting near-surface O 3 air quality, with an indication for O 3 pollution prediction and prevention.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

ADROC: An Emulation Experimentation Platform for Advancing Resilience of Control Systems

Cyberattacks against industrial control systems have increased over the last decade, making it more critical than ever for system owners to have the tools necessary to understand the cyber resilience of their systems. However, existing tools are often qualitative, subject matter expertise-driven, or highly generic, making thorough, data-driven cyber resilience analysis challenging. The ADROC project proposed to develop a platform to enable efficient, repeatable, data-driven cyber resilience analysis for cyber-physical systems. The approach consists of two phases of modeling: computationally efficient math modeling and high-fidelity emulations. The first phase allows for scenarios of low concern to be quickly filtered out, conserving resources available for analysis. The second phase supports more detailed scenario analysis, which is more predictive of real-world systems. Data extracted from experiments is used to calculate cyber resilience metrics. ADROC then ranks scenarios based on these metrics, enabling prioritization of system resources to improve cyber resilience.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Quantitative measurements of density in shock-compressed silver up to 330 GPa using x-ray diffraction

This work presents a structural study of shock-compressed states in Ag to 331 GPa, accessed via laser shock compression. Structures of the resulting crystalline phases and the average atomic distribution of the liquid state are determined using in situ x-ray diffraction. We employ structure factor analysis, adapted for a non-monochromatic x-ray source, to determine the density of the liquid phase from analysis of x-ray diffraction data for the first time in shock compressed Ag. We also present a detailed analysis of the crystalline phases, which shows good agreement with the phase boundaries reported in previous experimental and theoretical works. We utilize the whole powder pattern fitting approach implemented in the MAUD package to constrain stacking faults in the face centered cubic structure. We observe the ambient fcc structure up to a stress of 146 GPa before a transition to a body-centered cubic structure and liquid phase at 179 GPa, with full melting above 212 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Bimetallic Copper/Ruthenium/Osmium Complexes: Observation of Conformational Differences Between the Solution Phase and Solid State by Atomic Pair Distribution Function Analysis

Abstract High‐energy X‐ray scattering and pair distribution function analysis (HEXS/PDF) is a powerful method to reveal the structure of materials lacking long‐range order, but is underutilized for molecular complexes in solution. We demonstrate the application of HEXS/PDF with 0.26 Å resolution to uncover the solution structure of five bimetallic Cu I /Ru II /Os II complexes. HEXS/PDF of each complex in acetonitrile solution confirms the pairwise distances in the local coordination sphere of each metal center as well as the metal⋅⋅⋅metal distances separated by over 12 Å. The metal⋅⋅⋅metal distance detected in solution is compared with that from the crystal structure and molecular models to confirm that distortions to the metal bridging ligand are unique to the solid state. This work presents the first example of observing sub‐Ångström conformational differences by direct comparison of solution phase and solid‐state structures and shows the potential for HEXS/PDF in the determination of solution structure of single molecules.

Xie, Zhu‐Lin↗
DOE OSTI2021

Plasma-assisted catalysis for ammonia synthesis in a dielectric barrier discharge reactor: key surface reaction steps and potential causes of low energy yield

Ammonia synthesis experiments were carried out in a coaxial dielectric barrier discharge (DBD) reactor packed with several different supports and metal catalysts. There was a marked increase in the reaction rate, over that obtained in an empty DBD plasma reactor, upon introduction of a packed bed of γ-Al 2 O 3 , Ru/γ-Al 2 O 3 , or SiO 2 particles. The difference in the reaction rates over γ-Al 2 O 3 and Ru/γ-Al 2 O 3 was minimal. Complementary zero-dimensional plasma kinetic model analysis was also performed using inputs from experimental data. This kinetic analysis allowed for gas phase reactions, Eley–Rideal (E–R) reactions, and direct adsorption of radical species on the γ-Al 2 O 3 surface. On the metal surface, dissociative adsorption of N 2 and H 2 , and Langmuir–Hinshelwood reactions were also included. This analysis revealed that, under the conditions of our experiments, ammonia synthesis proceeds principally by the formation of reactive radicals in the gas phase, which then adsorb and participate in E–R reactions on both the metal and support material surfaces. Furthermore, this finding illustrates a challenge for substantially increasing the energy yield for plasma-assisted ammonia synthesis in typical DBD reactors containing packed catalyst beads.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of chromium on corrosion resistance of Ni-Cr-Mo-Gd alloys in seawater

Neutron absorbing materials are being considered within commercial spent nuclear fuel disposal canisters to maintain nuclear subcriticality in storage. To select candidate alloys for the canisters, both neutron absorption and corrosion resistance should be considered. This work examines corrosion resistance of Ni-Cr-Mo-Gd alloys developed specifically for neutron absorption. The addition of Gd results in a secondary gadolinide phase (Ni 5 Gd) that significantly changes the corrosion properties. Testing was performed primarily in seawater at 30°C. Seawater was selected as the most prevalent terrestrial brine and is characterized by a high chloride concentration. Various electrochemical corrosion techniques were carried out to evaluate Ni-Cr-Mo-Gd alloys with different Cr compositions and investigate the role of Ni 5 Gd phase on corrosion behavior. C22 was included as a benchmark material, due to the similarity in composition and the significant corrosion data available. Here, test results showed a tendency to passivate over time which is attributed to dissolution of surface exposed Ni 5 Gd phase. Cross-sectional analysis indicated that dissolution could penetrate hundreds of micrometers deep under aggressive conditions. It was found that higher Cr variant (21.01%) showed much shallower impact, suggesting Cr prevented primary phase corrosion and thus reduced Ni 5 Gd phase dissolution. Acid pickling of the specimens showed much less dissolution for a higher Cr material and suggested some primary phase dissolution for the low Cr specimen. Acid pickled specimens showed positive shifts in the repassivation potential, suggesting increased surface passivation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Partitioning of Ca to metastable precipitates in a Mg-rare earth alloy

The potential effect of the element Ca on the precipitation behavior was investigated in an Mg-rare earth alloy. A combination of metastable β''' and β' precipitates was observed for the peak aging condition at 200°C. Ca addition was found to have no significant effect on the precipitating phases and evolution sequence. Composition analysis showed that the Ca partitioned to both β''' and β' precipitate phases. First-principles calculations indicated that Ca partitions to the rare-earth sublattice in the precipitate phase. This finding suggests the potential of Ca to partially replace costly rare-earth elements in precipitation-hardened Mg-rare earth alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In-situ TEM EELS analysis of memristive thin films for neuromorphic computing

Neuromorphic computing stands as a promising frontier for advancing AI algorithms and applications like ChatGBT, offering significant energy efficiency gains. This paper delves into the hardware design intricacies of memristive thin films and their elementary switching mechanisms, including anion migration, electron migration, and phase transitions. Through comprehensive analysis of electron energy loss spectroscopy (EELS) data via in-situ transmission electron microscopy (TEM), we will deduce the primary memristive switching mechanisms vital for optimizing thin film fabrication parameters and achieving desired film thickness, conductivity, and memory retention. A single crystal ptype Si substrate was used with TiN as the bottom metal electrode, TiO x as the insulating dielectric layer, and Pt as the top metal electrode. In-situ TEM was able to tell us the thin film didn’t behave like a filamentary or phase transition material. EELS data deduced that electron trapping/detrapping was one of the primary switching mechanisms. By shedding light on these elementary mechanisms, our study aims to catalyze the development of more 2 efficient and effective neuromorphic computing systems to be deployed into mainstream technologies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Local orthorhombic phase in zirconium oxide nanocrystals: insights from X-ray pair distribution function analysis

Zirconium dioxide (ZrO 2 ) and hafnium dioxide (HfO 2 ) have emerged as promising alternatives to conventional ferroelectric materials. Understanding the crystal phases of these oxides under different conditions is crucial for optimizing their properties. There are several theories for the (anti)ferroelectric properties; however, comprehensive analysis, particularly at the local structure level, is lacking. In this study, we investigate the local structure of ZrO 2 nanocrystals using X-ray pair distribution function (PDF) analysis, revealing an unexpected local orthorhombic distortion irrespective of crystallite size. This finding suggests the potential existence of an intermediate orthorhombic phase during the microscopic switching pathway observed in previous studies. Additionally, we explore the influence of crystallite size and surface effects on the PDF. These results contribute to a deeper understanding of the structural dynamics in ZrO 2 and offer insights for the design of next-generation ferroelectric materials.

Pokratath, Rohan (ORCID:0000000268383939)↗
DOE OSTI2021

Recent Advances in Small Angle X-ray Scattering for Superlattice Study

Small-angle x-ray scattering is used for the structure determination of superlattice for its superior resolution, nondestructive nature, and high penetration power of x rays. With the advent of high brilliance x-ray sources and innovative computing algorithms, there have been notable advances in small angle x-ray scattering analysis of superlattices. High brilliance x-ray beams have made data analyses less model-dependent. Additionally, novel data acquisition systems are faster and more competitive than ever before, enabling a more accurate mapping of the superlattices' reciprocal space. Fast and high-throughput computing systems and algorithms also make possible advanced analysis methods, including iterative phasing algorithms, non-parameterized fitting of scattering data with molecular dynamics simulations, and the use of machine learning algorithms. As a result, solving nanoscale structures with high resolutions has become an attainable task. In this review, we highlight new developments in the field and introduce their applications for the analysis of nanoscale ordered structures, including nanoparticle supercrystals, nanoscale lithography patterns, and supramolecular self-assemblies. Particularly, we highlight the reciprocal space mapping techniques and the use of iterative phase retrieval algorithms. We also cover coherent-beam-based small angle x-ray scattering techniques such as ptychography and ptycho-tomography in view of the traditional small angle x-ray scattering perspective.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Superconducting phase diagram in Bi x Ni 1 – x thin films: The effects of Bi stoichiometry on superconductivity

The Bi-Ni binary system has been of interest due to possible unconventional superconductivity aroused therein, such as time-reversal symmetry breaking in Bi/Ni bilayers or the coexistence of superconductivity and ferromagnetism in Bi 3 ⁢Ni crystals. While Ni acts as a ferromagnetic element in such systems, the role of the strong spin-orbit coupling element Bi in superconductivity has remained unexplored. In this work, we systematically studied the effects of Bi stoichiometry on the superconductivity of Bi x ⁢Ni 1–x thin films (x ≈ 0.5–0.9) fabricated via a composition-spread approach. Here, the superconducting phase map of Bi x ⁢Ni 1–x thin films exhibited a superconducting composition region attributable to the intermetallic Bi 3 ⁢Ni phase with different amounts of excess Bi, revealed by synchrotron x-ray diffraction analysis. Interestingly, the mixed-phase region with Bi 3 ⁢Ni and Bi showed unusual increases in the superconducting transition temperature and residual resistance ratio as more Bi impurities were included, with the maximum T c (=4.2K) observed at x ≈ 0.79. A correlation analysis of structural, electrical, and magneto-transport characteristics across the composition variation revealed that the unusual superconducting “dome” is due to two competing roles of Bi: impurity scattering and carrier doping. We found that the carrier doping effect is dominant in the mild doping regime (0.74 ≤ x ≤ 0.79), while impurity scattering becomes more pronounced at larger Bi stoichiometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Tuning discharge voltage by Schottky electron barrier in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2

Recently, Mg doped Na metal oxide layered cathode compounds have attracted strong interest for Na-ion battery applications. We report a new type of asymmetric phase evolution between charge and discharge is found to show much-enhanced discharge voltage in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2 over the parent cathode compound. P2 solid solution is found to show an abnormal coexistence with O2-P2 two-phase reaction during discharge with simultaneous reduction of O, Ni, and Fe redoxes, distinct from the conventional P2-O2 two-phase reaction in the charge. Our analysis suggests that the P2 and O2 two-phase boundary forms a novel unidirectional Schottky barrier to impede electron and Na diffusions in discharge only, thus making the kinetically preferred P2 solid solution phase abnormally coexist with the two-phase region for high discharge voltage and low polarization. Our work demonstrates tuning dynamic evolution of electronic Schottky barrier as a new dimension for advanced kinetic design of high-performance battery cathode materials.

25 ENERGY STORAGE↗