Search NASA⌕ Search

SEARCH · Search NASA

Results for “planetary science data systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Orbit Operations at 433 Eros: Navigation for the NEAR Shoemaker Mission

NASA's Near Earth Asteroid Rendezvous Mission began its record-setting exploration of the asteroid 433 Eros by inserting the spacecraft into orbit about Eros on February 14, 2000. This is the first spacecraft from any country to orbit an asteroid. The mission has overcome a failed insertion burn attempt on December 20, 1998, an event that would have ended most planetary missions, to return to the same target and successfully begin its science mapping a little more than a year later. Shortly after the successful insertion into orbit, the mission was renamed NEAR Shoemaker (NEAR) in memory of the late astronomer and geologist Eugene Shoemaker. NEAR will gather science data at Eros until February 14, 2001, which is the nominal end of mission. The NEAR mission is managed by the Johns Hopkins University, Applied Physics Laboratory in Laurel, Maryland. Since the initial mission concept in 1992, the design and implementation of the NEAR navigation system have been the responsibility of the Jet Propulsion Laboratory, California Institute of Technology. This presentation will show some of the unique features of navigation and mission design related to orbiting an asteroid and to designing a robust navigation system for the NEAR spacecraft. The problem of navigating a spacecraft about an asteroid is made difficult by the relative uncertainty in the asteroid physical properties which perturb the orbit: i.e., the mass, gravity field, and spin state. To help solve this problem, the navigation system for NEAR uses traditional DSN radio metric Doppler and range tracking, along with new technologies of optical landmark tracking and laser ranging to the asteroid surface. The experiences to date for each of these data types in the navigation solutions will be presented. Plans for the remainder of the NEAR mission will be presented, which include low orbits (down to 35 km radius circular orbits), and close flybys that may pass within 1 km of the surface. In addition, at the end of mission, NASA has approved a controlled descent and hovering phase that will culminate with the spacecraft impacting the surface. The maneuver planning for this final phase will also be presented.

Williams, B. G.↗
NASA NTRS1998

Information Systems for NASA's Aeronautics and Space Enterprises

The aerospace industry is being challenged to reduce costs and development time as well as utilize new technologies to improve product performance. Information technology (IT) is the key to providing revolutionary solutions to the challenges posed by the increasing complexity of NASA's aeronautics and space missions and the sophisticated nature of the systems that enable them. The NASA Ames vision is to develop technologies enabling the information age, expanding the frontiers of knowledge for aeronautics and space, improving America's competitive position, and inspiring future generations. Ames' missions to accomplish that vision include: 1) performing research to support the American aviation community through the unique integration of computation, experimentation, simulation and flight testing, 2) studying the health of our planet, understanding living systems in space and the origins of the universe, developing technologies for space flight, and 3) to research, develop and deliver information technologies and applications. Information technology may be defined as the use of advance computing systems to generate data, analyze data, transform data into knowledge and to use as an aid in the decision-making process. The knowledge from transformed data can be displayed in visual, virtual and multimedia environments. The decision-making process can be fully autonomous or aided by a cognitive processes, i.e., computational aids designed to leverage human capacities. IT Systems can learn as they go, developing the capability to make decisions or aid the decision making process on the basis of experiences gained using limited data inputs. In the future, information systems will be used to aid space mission synthesis, virtual aerospace system design, aid damaged aircraft during landing, perform robotic surgery, and monitor the health and status of spacecraft and planetary probes. NASA Ames through the Center of Excellence for Information Technology Office is leading the effort in pursuit of revolutionary, IT-based approaches to satisfying NASA's aeronautics and space requirements. The objective of the effort is to incorporate information technologies within each of the Agency's four Enterprises, i.e., Aeronautics and Space Transportation Technology, Earth, Science, Human Exploration and Development of Space and Space Sciences. The end results of these efforts for Enterprise programs and projects should be reduced cost, enhanced mission capability and expedited mission completion.

Kutler, Paul↗
NASA NTRS2022

NASA’s Lunar Trailblazer Mission: A Pioneering Small Satellite for Lunar Water and Lunar Geology

Selected in 2019 as a NASA SIMPLEx mission, Lunar Trailblazer is in implementation for flight system delivery at the end of 2022. The mission’s goal is to understand the form, abundance, and distribution of water on the Moon and the lunar water cycle. Lunar Trailblazer also collects data of candidate landing sites to inform planning for future human and robotic exploration of the Moon and evaluate the potential for in situ resource utilization. Lunar Trailblazer’s two science instruments, the High-resolution Volatiles and Minerals Moon Mapper (HVM3) and the Lunar Thermal Mapper (LTM) provide simultaneous high-resolution spectral imaging data to map OH/water, crustal composition, and thermophysical properties from a 100±30 km lunar polar orbit. The ~210-kg flight system deploys from an ESPA Grande and utilizes a ~1000 m/s ΔV hydrazine chemical propulsion system, similar to that employed by GRAIL. Trailblazing elements include the novel state-of-the-art dataset collected at substantially reduced price point, fully geographically co-registered data products delivered to the Planetary Data System, planetary mission team demographics, Caltech campus mission operations, and student staffing of select mission ops roles. Lunar Trailblazer’s pioneering development is providing key lessons learned for future planetary small spacecraft.

Zareh, Shannon↗
NASA NTRS2022

Bringing Planetary Science Mission Outreach to the Deaf and Blind Communities

Introduction: Technology for enhancing outreach, like 3D printing, and science communication products, such as videos and podcasts, can be utilized within the planetary science community, especially for the engagement and excitement of current or upcoming planetary exploration missions. However, these communication products can also be further enhanced for the benefit of the blind and deaf communities. While such products may already be readily available, such projects are not easily accessible to blind and/or deaf certified educators, which often rely on making their own resources or do not have the funds to provide such resources (e.g., cost of 3D printers or cost of braille books). The planetary science community can have better practices to reach these broader audiences. Best practices can include transcripts from podcasts, transcripts in videos, and large-font captions. Images on websites and social media accounts should also include alt-text descriptive captions. 3D printing can also enhance planetary science for the blind community, through tactile posters, maps, and pamphlets. Planetary data can also be augmented by providing different tactile geological maps (e.g., topography or various datasets), and audio-visual videos freely available for educators. Visual Engagement: Visual engagement consists of several avenues to consider, the three main themes includes: 1) swag; 2) videos; 3) interactive exploration. Swag can include the fun visual take-home materials, such as stickers, posters, bookmarks, etc. Videos can include educational-specific videos (available freely via YouTube or by other educational-specific streaming avenues, such as Nebula or Curiosity Stream), provided they have Closed Captioning (CC). The use of QR codes to such videos or websites can also benefit to being added on swag. Interactive exploration can also be sub-divided by different types of engagement. A popular and still fairly new technology for public engagement is the use of virtual reality (VR). While this has been mainly for martian and lunar surface exploration [1], the deaf communities can benefit from VR through a more extensive look at our solar system and beyond (for example, a VR experience of the flight path, or visual map of the heliosphere/dynamics of our Sun). Audio Engagement: Audio tools can also be a useful avenue of communication, especially for the blind communities. Audio archiving can certainly be transcripts from the video engagements, but also the use of podcasts can also be a benefit. Podcasting can take on two forms: 1) interview engagement; and 2) update engagement. For interviews, scientists can communicate with STEM-specific podcast platforms to make other listener-bases aware of what is going on with a specific mission. For update-type communication, missions may opt to have an archived podcast of news, updates, and the teams involved. The most important aspect of such podcasts would be for the need of complimentary transcripts (including descriptive transcripts if sounds are included), and the limited use of jargon. Research Engagement: There have been several examples of involving the blind and low-vision communities in citizen science, such as through the NASA Heliophysics division. Examples include the NASA PUNCH (Polarimeter to Unify the Corona and Heliosphere) mission led by the Southwest Research Institute [2], which include blind and visually-impaired citizens to assist in the Sun’s coronal rhythms.” Another example is the Eclipse Soundscapes: Citizen Science Project (ES:CSP), which documents observations of acoustical changes of nature and ecosystems during solar eclipse events [3]. Inclusivity: A major theme that is necessary for public engagement is inclusivity and the awareness of reaching broader audiences. Outreach to include hearing/seeing impaired communities are still lacking in the sciences. There are several opportunities that the planetary sciences could take. Other projects that have emerged from the space sciences include adding transcripts to visual engagement [4], and the use of 3D printing for the visually-impaired [5]. References: [1] Olgin, J. (2020) 51st LPSC, Abstract 2137. [2] https://scitechdaily.com/outreach-for-nasa-punch-mission-embraces-ancient-and-modern-sun-watching-theme/ [3] https://science.nasa.gov/science-activation-team/eclipse-soundscapes [4] NASA International Observe the Moon Night (Blind and Deaf Accessible), Youtube Video ( https://www.youtube.com/watch?v=neHCfg0S3-Q) [5] Richardson, J., et al. (2018) AGU Fall Meeting, Abstract ED23F-0963.

C J Ahrens↗
NASA NTRS2005

The Different Wavelengths of Radio Science

Radio Science covers many different avenues. This summer I attempted to work in each of the different avenues to learn the full range of subjects covered by Radio Science. I began my summer by traveling to Greece for the 3rd International Planetary Probe Workshop (IPPW-3). I went as a co-author of the Doppler Wind Experiment (DWE) team paper. My first job when I returned from Greece was to update the Radio Science activities webpage. I then used Fast Fourier Transforms (FFT) to find radio signals in recorded Radio Science experimental data and determine frequencies and powers. I read about and ran Fortran code being used to determine wind measurements on Huygens. I formatted and revised the abstracts and data lengths for the DVD data sets. By performing these tasks, I also learned the Unix operating system as well as a small amount of shell programming.

Malecha, Jessica L.↗
NASA NTRS2010

Onboard Processing of Multispectral and Hyperspectral Data of Volcanic Activity for Future Earth-Orbiting and Planetary Missions

Autonomous onboard processing of data allows rapid response to detections of dynamic, changing processes. Software that can detect volcanic eruptions from thermal emission has been used to retask the Earth Observing 1 spacecraft to obtain additional data of the eruption. Rapid transmission of these data to the ground, and the automatic processing of the data to generated images, estimates of eruption parameters and maps of thermal structure, has allowed these products to be delivered rapidly to volcanologists to aid them in assessing eruption risk and hazard. Such applications will enhance science return from future Earth-orbiting spacecraft and also from spacecraft exploring the Solar System, or beyond, which hope to image dynamic processes. Especially in the latter case, long communication times between the spacecraft and Earth exclude a rapid response to what may be a transient process - only using onboard autonomy can the spacecraft react quickly to such an event.

Jupiter↗
NASA NTRSDate not supplied

Analysis of Bioburden Associated with Nonmetallic Spacecraft Materials

Planetary Protection (PP) requirements help to ensure the integrity of life-detection science conducted on solar system bodies, particularly those with liquid water. Such requirements are often met by a combination of cleaning and verification steps to reduce microbial contamination (i.e. bioburden) to an acceptable limit. There are only two cleaning methods approved by the National and Space Administration (NASA), vapor hydrogen peroxide (VHP) and heat microbial reduction (HMR), the latter of which is the most commonly employed. However, HMR can be harsh and produce its own concerns about material integrity, like aging or increasing hardness. When bioburden reduction methods cannot be employed, the project must rely on assumed NASA specification values of bioburden which can cause compliance issues with strict PP bioburden limitations. This work aimed to more accurately define the risk of contamination of a target body by providing empirical data associated with raw materials commonly used in solid rocket motors for lander missions. In this study, we pulverized nonmetallic materials using a cryogenic grinder, then analyzed the resulting substrate for microbial colony forming units (CFU). We found that many nonmetallic materials do not harbor large bioburden when compared with the NASA specification values, though a range existed depending on the material, treatment, and handling. The results from this work provide quantitative data to help reduce concerns of contamination, while also providing a foundation for follow up studies into additional sterilization methods and molecular identification of contaminating microbes.

Planetary Protection↗
NASA NTRS1998

Resuspension of Particles by Aerodynamic Deagglomeration

A deagglomerator system was developed, characterized by laboratory tests and flown under low gravity (low-g) microgravity conditions. Requirements for a dry powder deagglomeration system were generated by university and National Aeronautics and Space Administration (NASA) scientists from diverse fields of interest including exobiology, planetary sciences, and atmospheric sciences. Existing deagglomeration methods and devices are reviewed. An aerosol generation method suitable for dry powders over a large range of particles sizes and types at high concentrations with consistent deagglomeration efficiency was evaluated. Development of a pulsed-flow laboratory device and experimental approaches to meet the requirements without being g- dependent are described. Results of laboratory one-g quantitative characterization on one type of dry powder particle generator is discussed. Data from NASA low-g tests are summarized.

Fonda, Mark↗
NASA NTRS2004

Atmospheric and Surface Reflectance Measurements by the Geoscience Laser Altimeter System

The Geoscience Laser Altimeter System launched in early 2003 is the first satellite instrument IC space to globally observe the distribution of clouds and aerosol through laser remote sensing. The instrument is a basic backscatter lidar that operates at two wavelengths, 532 and 1064 nm. The mission data products for atmospheric observations include the calibrated, observed, attenuated backscatter cross section for cloud and aerosol; height detection for multiple cloud layers; planetary boundary layer height; cirrus and aerosol optical depth and the height distribution of aerosol and cloud scattering cross section profiles. The data will enhance knowledge in several areas of atmospheric science: the distribution, transport and influence of atmospheric aerosol, significantly more accurate measurements of the coverage and height of cirrus and other clouds, polar cloud climatology and radiation influence, the dynamics planetary boundary layer and others. An overview and summary of initial results are presented. Initial results from the first months of operation show the detailed height structure of clouds and aerosol on a global basis as expected. The 532 nm channel was expected to be the more sensitive and primary channel for aerosol measurements, but extensive aerosol loading in many regions are observed by the 1064 nm channel. Sensitivities are down to a few times l0(exp 6) l/(m-sr), much better than originally expected. The 532 channel adds an order of magnitude addition sensitivity. Initial comparisons to aerosol models have been done. Similarly for global cloud cover, good results are obtained just from the 1064 nm channel and from both channels, a measurement of multiple layers and cloud overlap has been made. Antarctica observations show high levels of total cloud cover including unique low-level cirrus and blowing snow. Data products have been generated for cloud, aerosol and PBL presence and heights in addition to the basic scattering cross section profiles.

Spinhirne, James D.↗
NASA NTRS2014

The Space Infrared Interferometric Telescope (SPIRIT)

The far-infrared astrophysics community is eager to follow up Spitzer and Herschel observations with sensitive, high-resolution imaging and spectroscopy, for such measurements are needed to understand merger-driven star formation and chemical enrichment in galaxies, star and planetary system formation, and the development and prevalence of water-bearing planets. The Space Infrared Interferometric Telescope (SPIRIT) is a wide field-of-view space-based spatio-spectral interferometer designed to operate in the 25 to 400 micron wavelength range. This talk will summarize the SPIRIT mission concept, with a focus on the science that motivates it and the technology that enables it. Without mentioning SPIRIT by name, the astrophysics community through the NASA Astrophysics Roadmap Committee recently recommended this mission as the first in a series of space-based interferometers. Data from a laboratory testbed interferometer will be used to illustrate how the spatio-spectral interferometry technique works.

Leisawitz, David T.↗
NASA NTRS2015

Directly Imaged Giant Planets: What Do We Hope to Learn?

As we move into an era when GPI and SPHERE are (hopefully) discovering and characterizing new young giant planets, it is worthwhile to step back and review our science goals for young giant planets. Of course for individual planets we ideally would hope to measure mass, radius, atmospheric composition, temperature, and cloud properties, but how do these characteristics fit into our broader understanding of planetary system origin and evolution theories? In my presentation I will review both the specifics of what we hope to learn from newly discovered young worlds as well as how these characteristics inform our broader understanding of giant planets and planetary systems. Finally I will consider the limitations realistic datasets will place on our ability to understand newly discovered planets, illustrating with data from any new such worlds that are available by the conference date.

temperature↗
NASA NTRS2015

Space Weathering in Houston: A Role for the Experimental Impact Laboratory at JSC

The effective investigation of space weathering demands an interdisciplinary approach that is at least as diversified as any other in planetary science. Because it is a macroscopic process affecting all bodies in the solar system, impact and its resulting shock effects must be given detailed attention in this regard. Direct observation of the effects of impact is most readily done for the Moon, but it still remains difficult for other bodies in the solar system. Analyses of meteorites and precious returned samples provide clues for space weathering on asteroids, but many deductions arising from those studies must still be considered circumstantial. Theoretical work is also indispensable, but it can only go as far as the sometimes meager data allow. Experimentation, however, can permit near real-time study of myriad processes that could contribute to space weathering. This contribution describes some of the capabilities of the Johnson Space Center's Experimental Impact Laboratory (EIL) and how they might help in understanding the space weathering process.

Cintala, M. J.↗
NASA NTRS2003

Exploring the Solar System Activities Outline: Hands-On Planetary Science for Formal Education K-14 and Informal Settings

Activities by NASA scientists and teachers focus on integrating Planetary Science activities with existing Earth science, math, and language arts curriculum. The wealth of activities that highlight missions and research pertaining to the exploring the solar system allows educators to choose activities that fit a particular concept or theme within their curriculum. Most of the activities use simple, inexpensive techniques that help students understand the how and why of what scientists are learning about comets, asteroids, meteorites, moons and planets. With these NASA developed activities students experience recent mission information about our solar system such as Mars geology and the search for life using Mars meteorites and robotic data. The Johnson Space Center ARES Education team has compiled a variety of NASA solar system activities to produce an annotated thematic outline useful to classroom educators and informal educators as they teach space science. An important aspect of the outline annotation is that it highlights appropriate science content information and key science and math concepts so educators can easily identify activities that will enhance curriculum development. The outline contains URLs for the activities and NASA educator guides as well as links to NASA mission science and technology. In the informal setting educators can use solar system exploration activities to reinforce learning in association with thematic displays, planetarium programs, youth group gatherings, or community events. Within formal education at the primary level some of the activities are appropriately designed to excite interest and arouse curiosity. Middle school educators will find activities that enhance thematic science and encourage students to think about the scientific process of investigation. Some of the activities offered are appropriate for the upper levels of high school and early college in that they require students to use and analyze data.

Allen, J. S.↗
NASA NTRS2020

Interpreting Exo-Planetary Atmospheres with the Next Generation Space-Based Telescope

We will soon have the technological capability to measure the atmospheric composition of temperate Earth-sized planets orbiting nearby stars. Interpreting these atmospheric signals poses a new challenge to planetary science. In contrast to jovian-like atmospheres, whose bulk compositions consist of hydrogen and helium, terrestrial planet atmospheres are likely comprised of high mean molecular weight secondary atmospheres, which have gone through a high degree of evolution. In order to understand the processes which affect a planetary atmosphere, I use early Mars as a case study. I leverage a combination of one-dimensional climate, photochemical and energy balance models in order to create one self-consistent model that closely matches currently available climate data. However, unlike in-situ observations from our own solar system, remote sensing techniques need to be developed and understood in order to accurately characterize exo-atmospheres. I describe the models used to create synthetic transit transmission observations, which includes models of transit spectroscopy and instrumental noise. Using these, I lay the framework for an information content-based approach to optimize our observations and maximize the retrievable information from exo-atmospheres. First I test the method on observing strategies of the well-studied, low-mean-molecular weight atmospheres of warm-Neptunes and hot Jupiters. Upon verifying the methodology, I finally address optimal observing strategies for temperate, high-mean-molecular weight atmospheres (Earths/super-Earths).

Batalha, Natasha↗
NASA NTRS2005

Lunar and Planetary Science XXXVI, Part 4

Contents include the following: High-Resolution Electron Energy-Loss Spectroscopy (HREELS) Using a Monochromated TEM/STEM. Dynamical Evolution of Planets in Open Clusters. Experimental Petrology of the Basaltic Shergottite Yamato 980459: Implications for the Thermal Structure of the Martian Mantle. Cryogenic Reflectance Spectroscopy of Highly Hydrated Sulfur-bearing Salts. Implications for Core Formation of the Earth from High Pressure-Temperature Au Partitioning Experiments. Uranium-Thorium Cosmochronology. Protracted Core Differentiation in Asteroids from 182Hf-182W Systematics in the Eagle Station Pallasite. Maximizing Mission Science Return Through Use of Spacecraft Autonomy: Active Volcanism and the Autonomous Sciencecraft Experiment. Classification of Volcanic Eruptions on Io and Earth Using Low-Resolution Remote Sensing Data. Isotopic Mass Fractionation Laws and the Initial Solar System (sup26)Al/(sup27)Al Ratio. Catastrophic Disruption of Porous and Solid Ice Bodies (sup187)Re-(sup187)Os Isotope Disturbance in LaPaz Mare Basalt Meteorites. Comparative Petrology and Geochemistry of the LaPaz Mare Basalt Meteorites. A Comparison of the Structure and Bonding of Carbon in Apex Chert Kerogenous Material and Fischer-Tropsch-Type Carbons. Broad Spectrum Characterization of Returned Samples: Orientation Constraints of Small Samples on X-Ray and Other Spectroscopies. Apollo 14 High-Ti Picritic Glass: Oxidation/Reduction by Condensation of Alkali Metals. New Lunar Meteorites from Oman: Dhofar 925, 960 and 961. The First Six Months of Iapetus Observations by the Cassini ISS Camera. First Imaging Results from the Iapetus B/C Flyby of the Cassini Spacecraft. Radiative Transfer Calculations for the Atmosphere of Mars in the 200-900 nm Range. Geomorphologic Map of the Atlantis Basin, Terra Sirenum, Mars. The Meaning of Iron 60: A Nearby Supernova Injected Short-lived Radionuclides into Our Protoplanetary Disk.

Source record↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Terrestrial Planets: Building Blocks and Differentiation

The session "Terrestrial Planets: Building Blocks and Differentiation: included the following topics:Magnesium Isotopes in the Earth, Moon, Mars, and Pallasite Parent Body: High-Precision Analysis of Olivine by Laser-Ablation Multi-Collector ICPMS; Meteoritic Constraints on Collision Rates in the Primordial Asteroid Belt and Its Origin; New Constraints on the Origin of the Highly Siderophile Elements in the Earth's Upper Mantle; Further Lu-Hf and Sm-Nd Isotopic Data on Planetary Materials and Consequences for Planetary Differentiation; A Deep Lunar Magma Ocean Based on Neodymium, Strontium and Hafnium Isotope Mass Balance Partial Resetting on Hf-W System by Giant Impacts; On the Problem of Metal-Silicate Equilibration During Planet Formation: Significance for Hf-W Chronometry ; Solid Metal-Liquid Metal Partitioning of Pt, Re, and Os: The Effect of Carbon; Siderophile Element Abundances in Fe-S-Ni-O Melts Segregated from Partially Molten Ordinary Chondrite Under Dynamic Conditions; Activity Coefficients of Silicon in Iron-Nickel Alloys: Experimental Determination and Relevance for Planetary Differentiation; Reinvestigation of the Ni and Co Metal-Silicate Partitioning; Metal/Silicate Paritioning of P, Ga, and W at High Pressures and Temperatures: Dependence on Silicate Melt Composition; and Closure of the Fe-S-Si Liquid Miscibility Gap at High Pressure and Its Implications for Planetary Core Formation.

Source record↗
NASA NTRS1991

UV-optical from space

The following subject areas are covered: (1) the science program (star formation and origins of planetary systems; structure and evolution of the interstellar medium; stellar population; the galactic and extragalactic distance scale; nature of galaxy nuclei, AGNs, and QSOs; formation and evolution of galaxies at high redshifts; and cosmology); (2) implementation of the science program; (3) the observatory-class missions (HST; LST - the 6m successor to HST; and next-generation 16m telescope); (4) moderate and small missions (Delta-class Explorers; imaging astrometric interferometer; small Explorers; optics development and demonstrations; and supporting ground-based capabilities); (5) prerequisites - the current science program (Lyman-FUSE; HTS optimization; the near-term science program; data analysis, modeling, and theory funding; and archives); (6) technologies for the next century; and (7) lunar-based telescopes and instruments.

Illingworth, Garth↗
NASA NTRS2019

Untangling Source-To-Sink Geochemical Signals in a ~3.5 Ga Martian Lake: Sedimentology and Geochemistry of the Murray Formation

Sedimentary rocks are historical archives of planetary surface processes; their grains, textures, and chemistry integrate the effects of source terrains, paleoclimatic conditions, weathering and transport processes, authigenic mineral precipitation, and diagenesis, which records groundwater chemistry through time. “Source to Sink” basin analysis seeks to constrain the influence of each of these different signals through sedimentary and geochemical analyses. Here, we use Mars Science Laboratory (MSL) Curiosity rover images and geochemical and mineralogical data from a traverse across a portion of the Murray formation—the lowermost unit exposed in the Gale crater central mound—to begin to constrain the aspects of the source to sink system that formed this Martian mudstone between 3.7 and 3.2 Ga.

Siebach, K. L.↗