Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantitative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Metamorphism of eucrite meteorites studied quantitatively using induced thermoluminescence

Induced thermoluminescence studies provide a new and quantitative means of determining relative metamorphic intensities for eucrite meteorites, the simplest and most ancient products of basaltic volcanism. Using this technique, it is shown that the eucrites constitute a continuous metamorphic series and not, as commonly assumed, two groups of metamorphosed and nonmetamorphosed meteorites. It is suggested that the method may have applications to other basalts.

Batchelor, J. David↗

Quantitative spectroscopy of hot stars

A review on the quantitative spectroscopy (QS) of hot stars is presented, with particular attention given to the study of photospheres, optically thin winds, unified model atmospheres, and stars with optically thick winds. It is concluded that the results presented here demonstrate the reliability of Qs as a unique source of accurate values of the global parameters (effective temperature, surface gravity, and elemental abundances) of hot stars.

Kudritzki, R. P.↗

A quantitative measure of phase correlations in density fields

A quantitative measure of the phase correlations in a density field is presented based on the location of the maxima of the Fourier components of that field. It is found that this measue can easily detect non-Gaussian behavior either in artificially constructed density fields or those that become non-Gaussian from gravitational clustering of Gaussian initial conditions. It is found that different initial power spectra produce somewhat distinguishable signals, and the signals are robust against sparse sampling.

Scherrer, Robert J.↗

Quantitative Evaluation Of Teleoperator Performance

Report describes experiments on remote manual control of robotic manipulator. Experiments conducted to evaluate quantitatively relative effectiveness of several control modes: various combinations of position control, rate control, remote compliance, and feedback from force and torque sensors. Tasks evaluated: removing thermal blanket, unbolting electrical panel, and handling bundles of electrical wires and electrical connectors on simulated solar Max satellite by means of remotely controlled robot in teleoperation laboratory.

Das, Hari↗

Quantitative infrared spectroscopy of minor constituents of the Earth's atmosphere

We obtain quantitative laboratory spectroscopic measurements of molecular constituents which are of importance in understanding the health of the Earth's atmosphere, and, in particular, emphasize those species which are important for understanding stratospheric kinetics or are used for long term monitoring of the stratosphere. Our measurements provide: (1) line and band intensity values which are needed to establish limits of detectability for as yet unobserved species and to quantify the abundance of those species which are observed; (2) line-positions, -half widths and pressure induced shifts are all needed for remote sensing techniques, and (3) data on the above basic molecular parameters at temperatures and pressures appropriate for the real atmosphere.

Chackerian, C., Jr.↗

Quantitative analysis of the effects of vertical magnetic fields on microsegregation in Te-doped LEC GaAs

Using near-IR transmission microscopy with computational absorption analysis, the effects of axial magnetic fields on micro- and macrosegregation during LP-LEC growth of GaAs were quantitatively investigated with a spatial resolution approaching 2 microns. Segregation inhomogeneities exceeding one order of magnitude are found to be related to fluid dynamics of the melt. The applicability of the BPS theory as well as the nonapplicability of the Cochran analysis are established.

Carlson, D. J.↗

Quantitative image processing in fluid mechanics

The current status of digital image processing in fluid flow research is reviewed. In particular, attention is given to a comprehensive approach to the extraction of quantitative data from multivariate databases and examples of recent developments. The discussion covers numerical simulations and experiments, data processing, generation and dissemination of knowledge, traditional image processing, hybrid processing, fluid flow vector field topology, and isosurface analysis using Marching Cubes.

Hesselink, Lambertus↗

Quantitative Tester And Reconditioner For Hand And Arm

Apparatus measures torques, forces, and motions of hand, wrist, forearm, elbow, and shoulder and aids in reconditioning muscles involved. Used to determine strengths and endurances of muscles, ranges of motion of joints, and reaction times. Provides quantitative data used to assess extent to which disuse, disease, or injury causes deterioration of muscles and of motor-coordination skills. Same apparatus serves as exercise machine to restore muscle performance by imposing electronically controlled, gradually increasing loads on muscles. Suitable for training and evaluating astronauts, field testing for workers' compensation claims, and physical therapy in hospitals. With aid of various attachments, system adapted to measure such special motions as pinching, rotation of wrist, and supination and pronation of the forearm. Attachments are gloves, wristlets, and sleeves.

Engle, Gary↗

Quantitative three-dimensional low-speed wake surveys

Theoretical and practical aspects of conducting three-dimensional wake measurements in large wind tunnels are reviewed with emphasis on applications in low-speed aerodynamics. Such quantitative wake surveys furnish separate values for the components of drag, such as profile drag and induced drag, but also measure lift without the use of a balance. In addition to global data, details of the wake flowfield as well as spanwise distributions of lift and drag are obtained. The paper demonstrates the value of this measurement technique using data from wake measurements conducted by Boeing on a variety of low-speed configurations including the complex high-lift system of a transport aircraft.

Brune, G. W.↗

Pitch Control Margin at High Angle of Attack - Quantitative Requirements (Flight Test Correlation With Simulation Predictions)

Aircraft designs that employ relaxed static stability (RSS) have the following problem: reduced pitching moments associated with RSS at high angle of attack (AOA) require a minimum pitch recovery moment or margin to guarantee a safe return from high AOA maneuvers at the most aft center of gravity (CG) encountered during a mission. Recent incidents and mishaps on Class IV aircraft have demonstrated a need for establishing quantitative longitudinal high AOA pitch control margin design guidelines for future aircraft. The Naval Air Warfare Center - Aircraft Division (NA WC-AD) is currently supporting an effort in conjunction with NASA Langley Research Center (NASA LaRC) to quantify such requirements. NASA LaRC has conducted a series of extensive simulation evaluations to define these design guidelines. The purpose of flight tests were to validate the overall research test methodology by comparing pilot comments, pilot ratings, and aircraft response characteristics gathered during inflight recoveries from high AOA conditions to those gathered during the fixed-base simulation sessions. Tests were completed on an F/A-18A in six flights for a total of 9.8 flight hours using an AOA and CG buildup sequence. Flight test results have validated the simulation studies in that pilot rating of high AOA nose-down recoveries were based on the short-term response interval in the forms of pitch acceleration and rate. In addition, flight test has demonstrated that high AOA pitch control margin can be evaluated using a stabilized pushover method.

Flight Testing↗

Quantitative results from the focusing schlieren technique

An iterative theoretical approach to obtain quantitative density data from the focusing schlieren technique is proposed. The approach is based on an approximate modeling of the focusing action in a focusing schlieren system, and an estimation of an appropriate focal plane thickness. The theoretical approach is incorporated in a computer program, and results obtained from a supersonic wind tunnel experiment evaluated by comparison with CFD data. The density distributions compared favorably with CFD predictions. However, improvements to the system are required in order to reduce noise in the data, to improve specifications of a depth of focus, and to refine the modeling of the focusing action.

Cook, S. P.↗

Quantitative investigations of geologic surfaces utilizing airborne visible/infrared imaging spectrometer (AVIRIS) and polarimetric radar (AIRSAR) data for Death Valley, California

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and polarimetric radar (AIRSAR) data were collected over Death Valley, California, USA, in September 1989. These two data sets were used to quantitatively characterize both the mineralogy and surface structure of the valley floor. Field mapping and characterization of the salt flats across the valley identified 16 separate units. The AVIRIS data were calibrated using the 'empirical line' method, and spectra extracted for the 16 units. A water vapor map was generated from the AVIRIS data and showed spatial variations in its distribution due to evaporation of surface water. Unmixing of the 16 spectral units produced maps of endmember abundance.

Kierein-Young, Kathryn S.↗

New optical approaches to the quantitative characterization of crystal growth, segregation and defect formation

Elemental and compound semiconductors were characterized using new optical approach based on NIR microscopy in conjunction with computational image analysis and contrast enhancement. The approach made it possible to perform a quantitative microsegregation analysis of GaAs and InP. NIR dark file illumination in transmission mode makes it possible to detect submicron precipitates in semiinsulating GaAs.

Carlson, D. J.↗

Real time quantitative imaging for semiconductor crystal growth, control and characterization

A quantitative real time image processing system has been developed which can be software-reconfigured for semiconductor processing and characterization tasks. In thermal imager mode, 2D temperature distributions of semiconductor melt surfaces (900-1600 C) can be obtained with temperature and spatial resolutions better than 0.5 C and 0.5 mm, respectively, as demonstrated by analysis of melt surface thermal distributions. Temporal and spatial image processing techniques and multitasking computational capabilities convert such thermal imaging into a multimode sensor for crystal growth control. A second configuration of the image processing engine in conjunction with bright and dark field transmission optics is used to nonintrusively determine the microdistribution of free charge carriers and submicron sized crystalline defects in semiconductors. The IR absorption characteristics of wafers are determined with 10-micron spatial resolution and, after calibration, are converted into charge carrier density.

Wargo, Michael J.↗

A quantitative assessment of the role of the post-shock turbulent region in the formation of Forbush decreases

We present results of a survey of the relation between Forbush decreases, magnetic clouds, and interplanetary shocks during the period August 1978 to November 1982. We have used data from the ISEE-3 study of bidirectional ions associated with magnetic structures or clouds of Marsden et al. (1987), and ground-based observations of Forbush decreases from several neutron monitors. We use the two-step model of a Forbush decrease. We assume that the first step is due to the passage of the postshock turbulent region, and that the second is due to the passage of the magnetic cloud or structure which usually follows the postshock turbulent region. To determine the effectiveness of the postshock turbulent region in causing a Forbush decrease, we have evaluated the radial diffusion coefficient of the postshock turbulent region for the eight largest events during the above period using observations of the magnetic field. We have made a quantitative assessment of the relative importance of the postshock turbulent region in the formation of the Forbush decrease, concluding that the postshock turbulent region alone is not sufficient to cause a Forbush decrease.

Sanderson, T. R.↗

Quantitative measurement of in-plane acoustic field components using surface-mounted fiber sensors

Extrinsic Fabry-Perot interferometric sensors have been used to obtain calibrated, quantitative measurements of the in-plane displacement components associated with the propagation of ultrasonic elastic stress waves on the surfaces of solids. The frequency response of the sensor is determined by the internal spacing between the two reflecting fiber endface surfaces which form the Fabry-Perot cavity, a distance which is easily controlled during fabrication. With knowledge of the material properties of the solid, the out-of-plane displacement component of the wave may also be determined, giving full field data.

Claus, Richard O.↗

Quantitative modeling of soil genesis processes

For fine spatial scale simulation, a model is being developed to predict changes in properties over short-, meso-, and long-term time scales within horizons of a given soil profile. Processes that control these changes can be grouped into five major process clusters: (1) abiotic chemical reactions; (2) activities of organisms; (3) energy balance and water phase transitions; (4) hydrologic flows; and (5) particle redistribution. Landscape modeling of soil development is possible using digitized soil maps associated with quantitative soil attribute data in a geographic information system (GIS) framework to which simulation models are applied.

Levine, E. R.↗

The calibration of video cameras for quantitative measurements

Several different recent applications of velocimetry at Langley Research Center are described in order to show the need for video camera calibration for quantitative measurements. Problems peculiar to video sensing are discussed, including synchronization and timing, targeting, and lighting. The extension of the measurements to include radiometric estimates is addressed.

Snow, Walter L.↗