Search NASA⌕ Search

SEARCH · Search NASA

Results for “refractive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Optical analogues to the equatorial Kerr–Newman black hole

Optical analogues to black holes allow the investigation of general relativity in a laboratory setting. Previous works have considered analogues to Schwarzschild black holes in an isotropic coordinate system; the major drawback is that required material properties diverge at the horizon. We present the dielectric permittivity and permeability tensors that exactly reproduce the equatorial Kerr–Newman metric, as well as the gradient-index material that reproduces equatorial Kerr–Newman null geodesics. Importantly, the radial profile of the scalar refractive index is finite along all trajectories except at the point of rotation reversal for counter-rotating geodesics. Construction of these analogues is feasible with available ordinary materials. A finite-difference frequency-domain solver of Maxwell’s equations is used to simulate light trajectories around a variety of Kerr–Newman black holes. For reasonably sized experimental systems, ray tracing confirms that null geodesics can be well-approximated in the lab, even when allowing for imperfect construction and experimental error.

79 ASTRONOMY AND ASTROPHYSICS↗

Observations suggest that North African dust absorbs less solar radiation than models estimate

Abstract Desert dust accounts for a large fraction of shortwave radiation absorbed by aerosols, which adds to the climate warming produced by greenhouse gases. However, it remains uncertain exactly how much shortwave radiation dust absorbs. Here, we leverage in-situ measurements of dust single-scattering albedo to constrain absorption at mid-visible wavelength by North African dust, which accounts for approximately half of the global dust. We find that climate and chemical transport models overestimate North African dust absorption aerosol optical depth (AAOD) by up to a factor of two. This occurs primarily because models overestimate the dust imaginary refractive index, the effect of which is partially masked by an underestimation of large dust particles. Similar factors might contribute to an overestimation of AAOD retrieved by the Aerosol Robotic Network, which is commonly used to evaluate climate and chemical transport models. The overestimation of dust absorption by models could lead to substantial biases in simulated dust impacts on the Earth system, including warm biases in dust radiative effects.

54 ENVIRONMENTAL SCIENCES↗

Data-driven design of novel halide perovskite alloys

The great tunability of the properties of halide perovskites presents new opportunities for optoelectronic applications as well as significant challenges associated with exploring combinatorial chemical spaces. Here, in this work, we develop a framework powered by high-throughput computations and machine learning for the design and prediction of mixed cation halide perovskite alloys. In a chemical space of ABX 3 perovskites with a selected set of options for A, B, and X species, pseudo-cubic structures with B-site mixing are simulated using density functional theory (DFT) and several properties are computed, including stability, lattice constant, band gap, vacancy formation energy, refractive index, and optical absorption spectrum, using both semi-local and hybrid functionals. Neural networks (NN) are used to train predictive models for every property using tabulated elemental properties of A, B, and X site species as descriptors. Starting from a DFT dataset of 229 points, we use the trained NN models to predict the structural, energetic, electronic, and optical properties of an extensive dataset of 17955 compounds, and perform high-throughput screening in terms of stability, band gap, and defect tolerance, to obtain 392 promising compounds that are ranked as potential absorbers according to their photovoltaic figure of merit. Compositional trends in the screened set of attractive mixed cation halide perovskites are revealed and additional computations are performed on selected compounds. The data-driven design framework developed here is promising for designing novel mixed compositions and can be extended to a wider perovskite chemical space in terms of A, B, and X species, different kinds of mixing at the A, B, or X sites, non-cubic phases, and other properties of interest.

36 MATERIALS SCIENCE↗

Deciphering helix assembly in the heliconical nematic phase via tender resonant X-ray scattering

Being a link between a uniaxial nematic and a chiral nematic, the twist bend nematic (N TB ) has been an intriguing topic for research over the last decade as a key to understanding chirality generation. Accurate description and understanding of resonance effects in helical structures provide crucial knowledge on the phase behavior beyond positional ordering. We examined the manifestation of resonance effects in N TB via tender resonant X-ray scattering (TReXS) at the sulfur K-edge. For the first time we demonstrate quantitatively that the energy dependence of the scattering peak in the N TB phase follows the energy dependence of the complex refractive indices measured by X-ray absorption. Furthermore, taking advantage of molecular energy calculation, we decipher the distinct helical pitch variation trend for symmetric/asymmetric dimers from the perspective of hybridization and reveal the strong effect of substituting oxygen for sulfur atoms on the helical pitch and the thermal helix extension.

36 MATERIALS SCIENCE↗

Unravelling the room temperature growth of two-dimensional h-BN nanosheets for multifunctional applications

The room temperature growth of two-dimensional van der Waals (2D-vdW) materials is indispensable for state-of-the-art nanotechnology. Low temperature growth supersedes the requirement of elevated growth temperatures accompanied with high thermal budgets. Moreover, for electronic applications, low or room temperature growth reduces the possibility of intrinsic film-substrate interfacial thermal diffusion related deterioration of the functional properties and the consequent deterioration of the device performance. Here, we demonstrated the growth of ultrawide-bandgap boron nitride (BN) at room temperature by using the pulsed laser deposition (PLD) process, which exhibited various functional properties for potential applications. Comprehensive chemical, spectroscopic and microscopic characterizations confirmed the growth of ordered nanosheet-like hexagonal BN (h-BN). Functionally, the nanosheets show hydrophobicity, high lubricity (low coefficient of friction), and a low refractive index within the visible to near-infrared wavelength range, and room temperature single-photon quantum emission. In conclusion, our work unveils an important step that brings a plethora of potential applications for these room temperature grown h-BN nanosheets as the synthesis can be feasible on any given substrate, thus creating a scenario for “h-BN on demand” under a frugal thermal budget.

2D h-BN↗

Additive manufacturing of LiCoO 2 electrodes via vat photopolymerization for lithium ion batteries

Additive manufacturing has the potential to revolutionize the fabrication of lithium-ion batteries for a diversity of applications including in portable, biomedical, aerospace, and the transportation fields. Standard commercial batteries consist of stacked layers of various components (current collectors, cathode, anode, separator and electrolyte) in a two-dimensional manner. By leveraging the latest advances in additive manufacturing and computer-aided design, an improved geometric and electrochemical configuration of these batteries can maximize energy efficiency while allowing design optimization to reduce dead space for a given application. In this work, a composite UV photosensitive resin was prepared and used as feedstock in a vat photopolymerization system. The resin was loaded with LiCoO 2 acting as electrochemically active material for the cathode of a lithium-ion battery, and was further improved with the addition of conductivity-enhancing carbonaceous additives. Challenges to additive manufacturing arise from the opacity and high viscosity of the composite nature of these electrochemically-active resins, which cause light refraction during selective UV curing. Subsequently, items were printed and subjected to a thermal post-processing step to obtain an adequate compromise between electrochemical performance and mechanical integrity. Both sintered and green state 3D printed cathodes were assembled into half-cell lithium-ion batteries using lithium metal as a reference and counter electrode. Electrochemical cycling of these batteries yielded satisfactory results approaching commercial LiCoO 2 cathodes’ performance, with the potential advantages of additive manufacturing – high surface area anode–cathode configurations for power performance as well as shape conformability.

25 ENERGY STORAGE↗

Bandgap engineering of SrZrS 3 chalcogenide perovskite via substitutional doping for photovoltaic applications: a first-principles DFT study

Strontium zirconium sulfide (SrZrS 3 ) has garnered significant attention for photovoltaic (PV) applications due to its excellent optoelectronic properties, high chemical and moisture stability, and non-toxicity. However, the bandgaps of both the α- and β-phases lie outside the optimum ranges for both single-junction solar cells (SJSCs) and tandem solar cells (TSCs), thereby limiting their applications in PV technologies. In this study, we employed hybrid density functional theory to engineer the band gaps of α- and β-SrZrS 3 through substitutional doping. We considered three dopants (Hf, Sn, and Ti) at the Zr site of SrZrS 3 with varying doping concentrations and investigated their effects on the structural, electronic, and optical properties of the materials. We found that Sn and Ti doping effectively lowers the band gaps of both α- and β-SrZrS 3 , whereas Hf doping increases them. For x values up to 0.25, the band gaps of the α-SrZr 1−x Sn x S 3 and α-SrZr 1−x Ti x S 3 are within the optimum range for SJSCs, and those of β-SrZr 1−x Sn x S 3 and β-SrZr 1−x Ti x S 3 lie within the optimum range for Si/perovskite as well as perovskite/perovskite TSCs. The three dopants exhibited significant effects on the optical properties of both α- and β-SrZrS 3 , including the absorption coefficient, energy-loss functions, reflectivity, and refractivity spectra. Thermodynamic stability analysis revealed that for both phases, SrZr 1−x Hf x S 3 can be synthesized via exothermic processes, whereas the formation of SrZr 1−x Ti x S 3 and SrZr1−xSn x S 3 is endothermic and hence, not thermodynamically favorable. Further analysis showed that SrZr 1−x Ti x S 3 in both α- and β-phases are stable under thermodynamic equilibrium conditions, whereas SrZr 1−x Sn x S 3 is prone to dissociation into ternary phases (SrZrS 3 and SrSnS 3 ), especially at higher doping concentrations. These results show that Ti doping is effective in tuning the band gaps of α- and β-SrZrS 3 toward the optimal values for PV applications.

14 SOLAR ENERGY↗

Phonon modulation of strongly coupled gold tetrahedral plasmonic nanoparticles and a carbocyanine J-aggregate

Coupling exciton and plasmon excitations to form polaritons are of great interest for manipulating energy transfer at the nanoscale via the formation of hybrid light–matter states. In this study, we successfully couple gold tetrahedral nanoparticles with the J-aggregate forming dye 5,5′,6,6′-tetrachloro-1,1′-diethyl-3,3′-di(4-sulfobutyl)-benzimidazolocarbocyanine (TDBC) to form a strongly coupled colloidal polariton system with a Rabi splitting energy of ∼206 meV. These gold tetrahedra exhibit coherent phonon modes upon photoexcitation, which produce transient oscillations of the LSPR energy for isolated tetrahedra. Transient absorption measurements of the polariton system were performed and show how these coherent phonon modes influence the polariton states’ extinction. We found that the oscillation period increases by 0.5 ± 0.14 ps upon surface deposition of TDBC dye, demonstrating LSPR sensitivity to the refractive index environment. Shifts in the plasmon resonance due to the coherent phonon modes transiently alters LSPR alignment with the J-aggregate exciton peak, resulting in shifts of the hybrid polariton states’ oscillator strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling rf sheath formation in turbulent tokamak boundary plasma

During ICRF antenna operation, complex interactions between turbulent density profiles, nonlinear RF sheaths, and RF-induced convective transport are observed to alter plasma density in the tokamak edge [D’Ippolito et al., Nucl. Fusion 38, 1543 (1998)]. In this work, we explore the physics of such interactions via numerical modeling, using a nonlinear EM/plasma/sheath code (VSim) and profiles obtained from a fluid plasma turbulence code (Hermes) in a 3D slab domain containing biased side-wall limiters. RF-rectified sheath formation on antenna and limiter surfaces is observed as electromagnetic waves launched by the antenna are refracted through the turbulent density profile. On transport timescales, such sheath potentials have been shown to influence both the mean species density and its RMS fluctuation spectrum [Smithe et al., these proceedings]. On the faster RF timescales, we demonstrate that the converse is also true – regions of high plasma density near material surfaces give rise to the highest sheath potential amplitudes. When density is turbulent and spatially nonuniform, localized regions of high sheath potential (hotspots) may develop where high-density filaments intersect material surfaces. Such hotspots are of particular concern as sources of impurity sputtering, and we explore their behavior in response to changes both to the local plasma density and to antenna operating parameters and structure. Related results exploring the role of Faraday shields and/or enclosing structures in suppressing high sheath potentials for other devices (e.g. SPARC) will also be shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion Cyclotron Heating in a Levitated Dipole Fusion Reactor

OpenStar Technologies is pursuing the levitated dipole (LD) as a highly modular, loosely-coupled system that leverages their expertise in high temperature superconductor (HTS) technology. The next generation experiment at OpenStar, Tahi (Ma¯ori for “first”), will demonstrate the generation and confinement of fast ions in a levitated dipole for the first time. Ion cyclotron range of frequency (ICRF) heating is a leading candidate for energetic ion formation in Tahi. A frequency in the 10 MHz range will be used for H minority heating or D majority heating with waves launched from an antenna located above the floating coil. Unlike a tokamak, where the targeted cyclotron resonance is typically a vertical path through the center of the plasma, in a dipole the resonance location follows a C-shaped path from the separatrix to the center of the plasma. The value of B also varies significantly within the confined plasma resulting in a large number of cyclotron harmonics present in the low field region. Furthermore, levitated dipoles contain a “first closed flux surface” surrounding the floating coil, in addition to the traditional separatrix /last closed flux surface. Simulation e ff orts using full-wave ICRF codes show that ICRF heating of a levitated dipole reactor is feasible using a pair of toroidal current straps phased to launch the appropriate parallel ( i.e. poloidal) refractive index.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental study of hot electron generation in shock ignition relevant high-intensity regime with large scale hot plasmas

In the shock ignition (SI) laser fusion scheme, hot electrons generated by the laser spike pulse can either preheat the fuel or strengthen the ignition shock, depending on the hot electron characteristics. We conducted a planar target experiment on the OMEGA-EP laser facility and characterized the temperature and total energy of hot electrons generated from a kilojoule-class 100-ps infrared (IR) or a 1-ns ultraviolet (UV) laser interacting with a large (L n ~330-450 μm) and hot (T e ~1-2 keV) coronal plasma at the SI-relevant intensities (~10 16 W/cm 2 ). The IR laser converts ~2.5% energy into hot electrons with T hot ~ 60–90 keV, while the UV laser couples 0.8% ± 0.7% energy into T hot =27 ± 9 keV hot electrons. The IR-produced hot electrons yield five times higher Cu Kα emission than the UV case, confirming the higher electron conversion efficiency with the IR laser. The low energy conversion from the UV laser to hot electrons may be due to the refraction of the off-normal incident laser in the large coronal plasma. These findings are the first comparisons of hot electron generation between the IR and UV pulses at kilojoule scales in SI-relevant large-scale plasmas. The findings may expand the SI design space to include IR lasers as the possible spike lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostic development for parallel wave-number measurement of lower hybrid waves in EAST

In this study, an eight-channel magnetic probe diagnostic system has been designed and installed adjacent to the 4.6 GHz lower hybrid (LH) grill antenna in the low-field side of the Experimental Advanced Superconducting Tokamak (EAST) in order to study the n ∥ evolution of LH waves in the first pass from the launcher to the core plasma. The magnetic probes are separated by 6.6 mm, which allows measurement of the dominant parallel refractive index n ∥ up to n ∥ = 5 for 4.6 GHz LH waves. The magnetic probes are designed to be sensitive to the magnetic field component perpendicular to the background magnetic field with a slit on the casing that encloses the probe. The intermediate frequency stage, which consists of two mixing stages, down-coverts the frequency of the measured wave signals at 4.6 GHz to 20 MHz. A bench test demonstrates the phase stability of the magnetic probe diagnostic system. By evaluating the phase variation of the measured signals along the background magnetic field, the dominant n ∥ of the LH wave in the scrape-off layer has been deduced during the 2019 experimental campaign. In the low density plasma, the measured dominant n ∥ of the LH waves is about 2.1, corresponding to the main peak 2.04 of the launched n ∥ spectrum. n ∥ deduced by the least-squares linear fit method remains near this value in the low density plasma with a high spatial correlation magnitude of 0.9. With an eight-channel probe system, a wave-number spectrum has also been deduced, which has a peak near to the measured dominant n ∥ .

47 OTHER INSTRUMENTATION↗

Imaging plasma formation in isolated nanoparticles with ultrafast resonant scattering

We have recorded the diffraction patterns from individual xenon clusters irradiated with intense extreme ultraviolet pulses to investigate the influence of light-induced electronic changes on the scattering response. The clusters were irradiated with short wavelength pulses in the wavelength regime of different 4d inner-shell resonances of neutral and ionic xenon, resulting in distinctly different optical properties from areas in the clusters with lower or higher charge states. The data show the emergence of a transient structure with a spatial extension of tens of nanometers within the otherwise homogeneous sample. Simulations indicate that ionization and nanoplasma formation result in a light-induced outer shell in the cluster with a strongly altered refractive index. The presented resonant scattering approach enables imaging of ultrafast electron dynamics on their natural timescale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical properties of cubic boron arsenide

The ultrahigh thermal conductivity of cubic boron arsenide (BAs) makes it a promising material for next-generation electronics and optoelectronics. Here, we report measured optical properties of BAs crystals, including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. In this work, the data were collected at room temperature using spectroscopic ellipsometry and transmission and reflection spectroscopy. We further calculated the optical response using density functional theory and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect bandgaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings pave the way for using BAs in future electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental investigation of turbulent wake flows in a helically wrapped rod bundle in presence of localized blockages

In nuclear sodium fast reactors, bundles of rods are tightly packed into a triangular lattice, enclosed in a hexagonal duct, and each pin is spirally wrapped with a thin wire. Flow blockages can potentially impact the local flow characteristics and heat transfer mechanisms in the bundle due to its small subchannel size. The effects of the blockage on the flow structures and heat transfer mechanisms are important aspects that require an accurate investigation. In this study, the flow-field characteristics in the vicinity of a blockage located in the exterior subchannel of rod bundles with helically wrapped wires were experimentally investigated. The velocity fields in the exterior subchannel were acquired by applying matched-index-of-refraction and time-resolved particle image velocimetry (TR-PIV) techniques for Reynolds numbers of Re 1 = 4000 and Re 2 = 17 000, i.e., equivalent to Rew 1 = 19 600 and Rew 2 = 83 200, respectively, based on the blockage width. The results from the TR-PIV measurements revealed an arch-shaped vortex with a large flow recirculation and a pair of counter-rotating vortices in the wake region downstream of the blockage, which is commonly observed in the wake flow of bluff bodies. The relative lateral distance and angle between the two vortices decreased when the Reynolds numbers increased. Profiles of maximum turbulence intensity along the shear layers illustrated the transition process including the growth, peak, and decay along the flow direction. From the spectral analysis of the turbulent velocities extracted at points along the shear layer, the Strouhal numbers ( St ) representing the vortex shedding frequency were found to be St = 0.25 and St = 0.56 for the left and right shear layers, respectively. Characteristics of shear layers generated by the blockage in the exterior subchannel were investigated via the two-point cross correlation of fluctuating velocities. The patiotemporal cross correlations of turbulent velocities, computed at points in the region where the left shear layer exhibited rolling effects and vortex breakdowns, were considerably wider and longer. The convection velocity U c was estimated to be ~0.82 U m to 0.93 U m . Proper orthogonal decomposition (POD) analysis was applied to the instantaneous velocity fields to extract the statistically dominant flow structures. It was found that POD modes 2–3 and 4–5 formed the pair modes when the corresponding POD temporal coefficients depicted sinusoidal shapes and exhibited nearly circular orbits in the phase space. Spectral analysis of the POD temporal coefficients confirmed the vortex shedding frequencies detected in the analysis of turbulent velocities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗