Search NASA⌕ Search

SEARCH · Search NASA

Results for “shift currents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Excitation Wavelength-Dependent Emission from Americium(III) in Mineral Acid Solutions

The photoluminescence behavior of trivalent americium, Am(III), in mineral acid solutions is reported under direct-metal excitation at seven high-energy wavelengths in the ultraviolet and visible regions (378-512 nm). This study revealed a dependence of the Am(III)-based visible emission profile on the chosen excitation wavelength. For example, excitation at the more common wavelength of 504 nm produces the two expected emission bands: one at approximately 600 nm (5D1' to 7F0') and another at 690 nm (5D1' to 7F1'). When the excitation wavelength is shifted to 398 nm (targeting the 5D3', 5H7' from 7F0' transitions), the emission occurs almost exclusively at 600 nm. This behavior is unexpected and potentially highlights fundamental knowledge gaps in the current understanding of the intraconfigurational 5f-5f electronic transitions that give rise to Am(III) photoluminescence. Although a full interpretation of these results is limited by the incomplete understanding of Am(III) speciation in mineral acid systems, this study explores several potential explanations for the observed behavior and challenges the widely held assumption of a single emissive Am(III) species.

Americium↗
DOE OSTI2025

Field-Driven Out-of-Equilibrium Collective Patterns for Swarm Micro-Robotics

Soft robotics has been rapidly advancing, offering significant improvements over traditional rigid robotic systems through the use of compliant materials that enhance adaptability and interaction with the environment. However, current approaches face critical challenges, including the reliance on complex “top-down” fabrication techniques and the difficulty of wireless powering and control at the microscale. Swarm robotics introduces a paradigm shift, leveraging collective dynamics to achieve cooperative and adaptable behaviors among multiple robotic units. Inspired by nature, this “bottom-up” approach enables swarm robots to execute task-specific reconfigurations, enhancing flexibility and robustness. Field-driven active colloids emerge as a promising platform for swarm microrobotics, capable of self-propulsion and self-organization into dynamic collective patterns under external field excitation and manipulation. These systems mimic biologically inspired swarm behaviors, such as flocking and vortex formation, providing a versatile foundation for designing innovative swarm microrobots. Here, this review discusses the principles of electric and magnetic field-driven collective self-organization, focusing on the particle dynamics, the emergence of collective swarm patterns, and illustrative examples of functional swarm microrobots. It concludes with future perspectives on harnessing these systems for adaptive, scalable, and multifunctional microrobotic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Time irreversibility as an indicator of approaching tipping points in Earth subsystems

With shifting environmental trends, many Earth system elements may be poised to undergo critical transitions or ‘tipping’. Reliable anticipation of these tipping elements is vital to inform policy decisions. Many of the current methods for tipping point detection are based on loss of resilience or ‘critical slowdown’ of the system as it approaches a tipping point. However, these methods are prone to false alarms; the detected slowdown may be an artifact of nonstationary noise unrelated to tipping behavior. Here, we explore the efficacy of early warning signs based on a nonequilibrium thermodynamics framework. The model-free detection method relies on the increased intrinsic time-irreversibility due to detailed balance breaking, preceding the onset of tipping or instabilities. We demonstrate that these EWSs are effective for tipping point detection and robust against false alarms due to nonstationary noise, using idealized models for two key elements of the Earth system that are prone to tipping: the Atlantic Meridional Overturning Circulation and Arctic sea-ice loss.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Computational investigation of the impact of metal–organic framework topology on hydrogen storage capacity

Metal–organic frameworks (MOFs) are promising, tunable materials for hydrogen storage. For application under cryogenic operating conditions, past work has run into a ceiling on performance due to a trade-off in the volumetric deliverable capacity (VDC) versus the gravimetric deliverable capacity (GDC). In this study, we computationally constructed and screened 105 230 MOF structures based on 529 nets to explore the effect of underlying topology on the hydrogen storage performance of the resulting materials. A machine learning model was developed based on simulated hydrogen uptake to facilitate screening of the entire dataset, and it successfully identified the top 10% of materials with a root-mean-square error of approximately 1 g L −1 as validated by subsequent grand canonical Monte Carlo simulations. We identified a promising structure based on the tsx topology that exhibits both VDC and GDC higher than the current benchmark material, MOF-5. Our data-driven analysis indicates that nets with higher net density yield MOFs with enhanced volumetric and gravimetric surface areas, thereby improving maximum VDC while shifting the capacity trade-off toward higher GDC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Numerical study of implosion instability mitigation in magnetically driven solid liner dynamic screw pinches

Magnetized liner inertial fusion experiments on the Z accelerator suffer from magneto-Rayleigh–Taylor instabilities (MRTI) that compromise integrity of the imploding cylindrical liner, limiting achievable fusion fuel conditions and ultimately reducing magneto-inertial fusion target performance. Dynamic screw pinches (DSP) provide a method to reduce MRTI in-flight via application of magnetic field line tension to the imploding liner outer surface. In contrast with z-pinches that drive implosions with an azimuthal magnetic field, dynamic screw pinches enforce an additional axial drive magnetic field component, making the overall drive magnetic field helical. As the liner implodes, cumulative MRTI development is reduced by dynamically shifting the orientation of the fastest growing instability modes. Three-dimensional magnetohydrodynamic simulations show that the DSP mechanism effectively stabilizes initially solid cylindrical liner implosions driven by Z-scale current pulses, indicating that MRTI mitigation increases with the ratio of axial to azimuthal drive magnetic field components (i.e., the drive field ratio). We also performed a spectral analysis of the simulated imploding density distributions, extracting wavelength and pitch angle of the simulated MRTI structures to study their dynamics during the implosion. Simulations of liners initially perturbed with drive-field-aligned sinusoidal structures indicate that MRTI mitigation in DSP implosions decreases with perturbation wavelength, once again suggestive of magnetic field line tension effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Development and performance of high-temperature superconducting CORC ® cables with CFD REBCO tapes

Abstract Increasing the normal zone propagation velocity (NZPV) in superconducting cables based on rare earth barium copper oxide (REBCO) tapes is expected to cause a paradigm shift by enabling the development of faster and more reliable quench detection systems to mitigate the development of destructive hot spots. Furthermore, a higher NZPV is beneficial in terms of fault current limitation capabilities by accelerating the homogenization of the quench in superconducting power devices. One way envisioned to increase the NZPV of cables based on REBCO tapes is the current flow diverter (CFD) concept. A Conductor on Round Core (CORC ® ) cable made with CFD REBCO tapes, called CFD CORC ® cable, and a CORC ® cable made with regular REBCO tapes, were fabricated and tested. The critical current of the CFD and regular CORC ® cables were obtained at temperatures ranging from 67 to 77 K in self-field. Measurements showed that the NZPV was increased by a factor of 4–4.5 in the case of the CFD CORC ® cable. Furthermore, the results suggest that the NZPV depends only on the applied current, similar to what has been observed previously on single REBCO tapes. These results demonstrate the successful integration of CFD REBCO tapes in CORC ® cables, without compromising their superconducting properties or their enhanced NZPV. The possibility of enhancing the NZPV of REBCO-based cables could facilitate quench detection, which remains an important issue in HTS magnet applications. This advancement also holds promise for the fault current limitation functionality of CORC ® cables.

Ben Saâd, Haïfa (ORCID:0000000216205364)↗
DOE OSTI2024

From wide to ultrawide-bandgap semiconductors for high power and high frequency electronic devices

Abstract Wide and ultrawide-bandgap (U/WBG) materials have garnered significant attention within the semiconductor device community due to their potential to enhance device performance through their substantial bandgap properties. These exceptional material characteristics can enable more robust and efficient devices, particularly in scenarios involving high power, high frequency, and extreme environmental conditions. Despite the promising outlook, the physics of UWBG materials remains inadequately understood, leading to a notable gap between theoretical predictions and experimental device behavior. To address this knowledge gap and pinpoint areas where further research can have the most significant impact, this review provides an overview of the progress and limitations in U/WBG materials. The review commences by discussing Gallium Nitride, a more mature WBG material that serves as a foundation for establishing fundamental concepts and addressing associated challenges. Subsequently, the focus shifts to the examination of various UWBG materials, including AlGaN/AlN, Diamond, and Ga 2 O 3 . For each of these materials, the review delves into their unique properties, growth methods, and current state-of-the-art devices, with a primary emphasis on their applications in power and radio-frequency electronics.

Materials Science↗
DOE OSTI2020

Intrinsic Mechanism for Anisotropic Magnetoresistance and Experimental Confirmation in Co{sub x}Fe{sub 1-x} Single-Crystal Fims.

Using first-principles transport calculations, we predict that the anisotropic magnetoresistance (AMR) of single-crystal CoxFe1-x alloys is strongly dependent on the current orientation and alloy concentration. An intrinsic mechanism for AMR is found to arise from the band crossing due to magnetization-dependent symmetry protection. These special k points can be shifted towards or away from the Fermi energy by varying the alloy composition and hence the exchange splitting, thus allowing AMR tunability. The prediction is confirmed by delicate transport measurements, which further reveal a reciprocal relationship of the longitudinal and transverse resistivities along different crystal axes.

Zeng, F. L.↗
DOE OSTI2024

Spin squeezing with itinerant dipoles: A case for shallow lattices

Entangled spin squeezed states generated via dipolar interactions in lattice models provide unique opportunities for quantum enhanced sensing and are now within reach of current experiments. A critical question in this context is which parameter regimes offer the best prospects under realistic conditions. Light scattering in deep lattices can induce significant decoherence and strong Stark shifts, while shallow lattices face motional decoherence as a fundamental obstacle. Here we analyze the interplay between motion and spin squeezing in itinerant fermionic dipoles in one dimensional chains using exact matrix product state simulations. We demonstrate that shallow lattices can achieve more than 5 dB of squeezing, outperforming deep lattices by up to more than 3 dB, even in the presence of low filling, loss, and decoherence. We relate this finding to SU(2)-symmetric superexchange interactions, which keep spins aligned and protect collective correlations. We show that the optimal regime is achieved for small repulsive off-site interactions, with a trade-off between maximal squeezing and optimal squeezing time. Published by the American Physical Society 2024

Wellnitz, David (ORCID:0000000349788938)↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors

Abstract Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are “critical” (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L1 0 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs? Graphical abstract

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors [Slides]

Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are "critical" (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L10 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs?

42 ENGINEERING↗
DOE OSTI2024

Expansion of high-latitude deciduous forests driven by interactions between climate warming and fire: Modeling Archive

This Modeling Archive is in support of an NGEE Arctic publication. More information in the related references. The dataset is a model (ecosys) output used in a study that examined the potential future shifts in high-latitude vegetation types (PFTs) driven by changes in 21st century climate and fire. The study highlights the importance of mechanistically representing differences in plant functional traits on current and possible 21st century trajectories of Alaskan PFTs. This dataset package includes 13 files in pdf, csv, and nc formats.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The Dependence of Electron-only Magnetic Reconnection on Plasma Beta and Magnetic Shear: Theory and Observations

We investigate the onset conditions for electron-only magnetic reconnection through an analysis of 86 reconnection events observed by the Magnetospheric Multiscale mission in magnetosheath and magnetospheric current sheets. Our study presents the first observational evidence that the occurrence of electron-only reconnection depends on both the magnetic-field shear angle (θ) across the current sheet and the cross-sheet electron beta jump, quantified either by the inflow electron beta difference (Δβ e ) or by a modified electron beta jump (Δβ$^*_e$) defined by the cross-sheet electron pressure difference normalized by the average of the inflow magnetic pressure in the two inflow regions. We extend the diamagnetic-drift suppression mechanism from standard reconnection to electron-only reconnection by deriving relations applicable to electron-scale current sheets. Using scaling estimates, the electron-only reconnection suppression relation is derived as Δβ$^*_e$ ≳ 2(L/d e ) tan (θ/2), while a natural extension of the ion-coupled reconnection suppression criterion is Δβ e ≳ 2(L/d e ) tan (θ/2). At low Δβ e and Δβ$^*_e$ values, reconnection is detected across a large range of magnetic shear (from low to high), whereas high Δβ e and Δβ$^*_e$ conditions restrict reconnection to large shear configurations: shear angles as small as θ ≈ 5° occur when Δβ e (or Δβ$^*_e$) ≲0.1. However, only events exceeding θ ≳ 70° are found when Δβ e ≳ 1.0; this apparent restriction weakens when employing Δβ$^*_e$, as the corresponding data points shift toward smaller values of the modified electron beta jump. These findings quantitatively support theoretical predictions of reconnection suppression in high-β e plasmas at low shears, attributed to X-line drift induced by pressure gradients across electron-scale current sheets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Shifts in hydropower operation to balance wind and solar will modify effects on aquatic biota

To avoid negative consequences to freshwater biota from climate change, society must complete the transition from fossil to renewable electricity sources. However, temporal patterns in hydropower generation (and flow releases that affect aquatic biota) may change with increased wind and solar penetration. We used power cost modeling to characterize current and future within-day and seasonal patterns in hydropower generation across the Eastern Interconnection in a wet and a dry year. Compared to the baseline, future hydropower generation across the grid decreased during the day and increased before dawn and after dusk. At a project level, such a pattern would suggest 'double peaking' operation (up- and down-ramping before dawn and after dusk, with lower releases midday). Variation in generation was higher in wet years than dry years, foreshadowing possible flow constraints on hydropower flexibility. At the grid scale, projected ramping rates were higher in all seasons. A review of the ecological literature suggests that these changes would shift the timing of invertebrate drift and elevate the risk of nest scouring during up-ramping and the risk of stranding or dewatering during down ramping. Thermal conditions may be moderated by increased ramping. Strategies for adapting to future shifts in the renewable portfolio range from re-regulation in reservoir cascades to providing flow refuge (structures and vegetation) below individual projects. Coordinated basin-scale operation can distribute peaking operation to maintain grid support while restricting local ramping at critical ecological times. In addition, research to design hybrid renewable systems that add battery storage is needed to understand how we can mitigate future risks to aquatic communities while promoting the use of renewable energy. This study, which is among the first to examine ecological side-effects of the shift to renewable energy in freshwater ecosystems, lays out a path toward understanding and navigating changes to flow regimes under the energy transition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Enhanced performance of Bi 2 S 3 /TiO 2 heterostructure composite films for solar cell applications

Day to day energy production is shifting towards renewable energy sources as these sources become more economically viable while being less polluting to operate; solar energy has become one of the major sources of renewable energy. However, it currently relies on ultra-pure silicon ingots to produce commercial silicon photovoltaics, which prevents the cost of electricity being produced to compete with non-renewable energy production. A viable low-cost alternative for silicon based cells would be dye-sensitized solar cells (DSSCs), which are easier and cheaper to manufacture as they do not require expensive and delicate raw materials to make. Moreover, they could be made semi-flexible which allows for a greater variety of applications. A DSSC consists of three components, a photo-electrode, an electrolyte and a counter-electrode. When exposed to incident light, the complex photosensitizers in the photoelectrode release electrons which are transported to the external load, leaving the photoelectrode in an oxidized state. The electrons are collected by the counter electrode and used to reduce the electrolyte. This charged electrolyte then reduces the positively charged photoelectrode, allowing the process to begin again. To improve the efficiency of this process, we explore the use of bismuth sulfide (Bi 2 S 3 ) and titanium oxide (TiO 2 ) composite as photoelectrode material and investigate their impact on the efficiency of DSSC.

14 SOLAR ENERGY↗
DOE OSTI2020

Reaction mechanism and kinetics for CO 2 reduction on nickel single atom catalysts from quantum mechanics

Experiments have shown that graphene-supported Ni-single atom catalysts (Ni-SACs) provide a promising strategy for the electrochemical reduction of CO 2 to CO, but the nature of the Ni sites (Ni-N 2 C 2 , Ni-N 3 C 1 , Ni-N 4 ) in Ni-SACs has not been determined experimentally. Here, we apply the recently developed grand canonical potential kinetics (GCP-K) formulation of quantum mechanics to predict the kinetics as a function of applied potential (U) to determine faradic efficiency, turn over frequency, and Tafel slope for CO and H 2 production for all three sites. We predict an onset potential (at 10 mA cm –2 ) U onset = –0.84 V (vs. RHE) for Ni-N 2 C 2 site and U onset = –0.92 V for Ni-N 3 C 1 site in agreement with experiments, and U onset = –1.03 V for Ni-N 4 . We predict that the highest current is for Ni-N 4 , leading to 700 mA cm –2 at U = –1.12 V. To help determine the actual sites in the experiments, we predict the XPS binding energy shift and CO vibrational frequency for each site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Magnetic breakdown and spin-zero effect in quantum oscillations in kagome metal CsV3Sb5

Abstract In the recently discovered kagome metal CsV 3 Sb 5 , an intriguing proposal invoking a doped Chern insulator state suggests the presence of small Chern Fermi pockets hosting spontaneous orbital-currents and large orbital magnetic moments. While the net thermodynamic magnetization is nearly insensitive to these moments, due to their antiferromagnetic alignment, their presence can be revealed by the Zeeman effect, which shifts electron energies in magnetic fields with a proportionality given by the effective g −factor. Here, we determine the g -factor using the spin-zero effect in magnetic quantum oscillations. A large g -factor enhancement is visible only in magnetic breakdown orbits between conventional and concentrated Berry curvature Fermi pockets that host large orbital moments. Such Berry-curvature-generated large orbital moments are almost always concealed by other effects. In this system, however, magnetic breakdown orbits due to the proximity to a conventional Fermi-surface section allow them to be visibly manifested in magnetic quantum oscillations. Our results provide a remarkable example of the interplay between electronic correlations and more conventional electronic bands in quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of penetrating collisions of plasma ions on spectral line shapes

Spectral-line-broadening models have been moving towards including full Coulomb interactions between the atom and plasma, replacing the commonly used dipole approximation. The effects of the full Coulomb interaction have been thoroughly explored for plasma electrons, resulting in redshifts of spectral lines in high-energy-density plasmas. We explore the impact of a full Coulomb treatment on ion broadening. Penetrating collisions due to ions do not significantly impact the linewidths. The most significant aspect is the appearance of quasimolecular resonances in the far line wings, such as those previously observed in white-dwarf spectra. We identify several problems with the existing models. The most direct implementation causes the quasimolecular features to appear at the wrong photon energies. It is possible to include the detailed molecular structure, but this currently requires the Anderson-Talman approximation, which ignores the N-body properties of the plasma. We find that N-body effects can substantially broaden these quasimolecular features and even shift them, depending on the plasma conditions. We conclude that penetration of ions into the spatial extent of the radiator wave function does not strongly affect the usual diagnostics and may have a moderate to weak effect on opacity. Furthermore, the Rosseland mean opacity is weighted towards low-opacity regions of a spectrum, where these quasimolecular features are found.

79 ASTRONOMY AND ASTROPHYSICS↗