Search NASA⌕ Search

SEARCH · Search NASA

Results for “solvent transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mechanistic Insights in Quinone-Based Zinc Batteries with Nonaqueous Electrolytes

Three quinone-based organic electrodes were tested in nonaqueous Zn-batteries using different salts and solvents. The Zn(TFSI)(2)/acetonitrile system exhibited the best performance due to its excellent transport and electrochemical properties. The mechanistic studies on the electrode kinetics were also carried out. While 2,5-dimethoxybenzoquinone (DMBQ) displayed a typical faradaic battery behavior, its polymeric derivatives showed a slow charge transfer inside the polymeric film as depicted by cyclic voltammograms. (C) 2020 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.

organic electrode, electrolyte, mechanism↗
DOE OSTI2026

Reparameterizing a Lipid Force Field Using Small-Angle X-ray Scattering to Improve Predictions of Multicomponent Membranes under Organic Solvent Stress

Understanding and predicting properties of lipid-bilayer membranes are essential to elucidating organismal physiology and pathophysiology. Therefore, substantial efforts have been undertaken to derive accurate molecular-mechanics force fields (FF) to allow simulation of their properties; however, much of these past efforts focused on tuning force fields to accurately reproduce the properties of model single-component membranes and not multicomponent or stressed membranes. Here, we tuned the CHARMM36 FF for a simple 2-component model of a Gram-positive bacterium. This updated force field is parametrized against a single condensed-phase property, the small-angle X-ray scattering (SAXS) intensities of the 2-component lipid system, using a version of ForceBalance implemented previously (named ForceBalance-SAS) with SAXS and small-angle neutron scattering (SANS) intensities as optimization targets. After tuning, we observe improved agreement with the experimental SAXS of the membrane under 1-butanol and tetrahydrofuran solvent stresses, with a factor of 10.0 and 7.5 reduction, respectively, in χ 2 , the measure of the discrepancy between experimental and computed SAXS intensities. Furthermore, this reparametrized force field yielded improved agreement between experimental and simulated membrane thicknesses for the pure lipid systems. However, we note limitations in transferability and diagnose the source of such limitations, particularly the need for SANS in addition to SAXS.

Demerdash, Omar N. A. [Oak Ridge National Laborato↗
DOE OSTI2022

Compact Peptoid Molecular Brushes for Nanoparticle Stabilization

Controlling the interfaces and interactions of colloidal nanoparticles (NPs) via tethered molecular moieties is crucial for NP applications in engineered nanomaterials, optics, catalysis, and nanomedicine. Despite a broad range of molecular types explored, there is a need for a flexible approach to rationally vary the chemistry and structure of these interfacial molecules for controlling NP stability in diverse environments, while maintaining a small size of the NP molecular shell. Here, we demonstrate that low-molecular-weight, bifunctional comb-shaped, and sequence-defined peptoids can effectively stabilize gold NPs (AuNPs). The generality of this robust functionalization strategy was also demonstrated by coating of silver, platinum, and iron oxide NPs with designed peptoids. Each peptoid (PE) is designed with varied arrangements of a multivalent AuNP-binding domain and a solvation domain consisting of oligo-ethylene glycol (EG) branches. Among designs, a peptoid (PE5) with a diblock structure is demonstrated to provide a superior nanocolloidal stability in diverse aqueous solutions while forming a compact shell (similar to 1.5 nm) on the AuNP surface. We demonstrate by experiments and molecular dynamics simulations that PE5-coated AuNPs (PE5/AuNPs) are stable in select organic solvents owing to the strong PE5 (amine)-Au binding and solubility of the oligo-EG motifs. At the vapor-aqueous interface, we show that PE5/AuNPs remain stable and can self-assemble into ordered 2D lattices. The NP films exhibit strong near-field plasmonic coupling when transferred to solid substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effect of polymer structure and material properties on mechanochemical reaction environments for polymer recycling

Plastic waste accumulation necessitates innovative recycling approaches to achieve sustainability goals. Mechanochemical depolymerization offers a solvent-free, energy-efficient route to convert polymers into valuable monomers. In addition to their chemical properties, the way that polymers absorb kinetic energy is a key parameter of any mechanochemical process. This perspective explores the principles underpinning mechanochemical recycling, emphasizing how deformation and localized transient heating mediate energy transfer between impacts and localized excitations. Key factors such as polymer crystallinity, molecular weight, viscoelasticity, and thermal effects are analyzed to elucidate their role in energy transfer mechanisms during ball milling. This work establishes a foundational framework for the design and optimization of mechanochemical recycling by connecting polymer response to mechanical energy with the intention to improve depolymerization efficiency. Future research opportunities are outlined to advance the integration of polymer science and mechanochemistry for scalable, sustainable plastic upcycling.

ball mill↗
DOE OSTI2024

Trap States in Reduced Colloidal Titanium Dioxide Nanoparticles Have Different Proton Stoichiometries

Added electrons and holes in semiconducting (nano)materials typically occupy “trap states,” which often determine their photophysical properties and chemical reactivity. However, trap states are usually ill-defined, with few insights into their stoichiometry or structure. Our laboratory previously reported that aqueous colloidal TiO 2 nanoparticles prepared from TiCl 4 + H 2 O have two classes of electron trap states, termed Blue and Red. Herein, we show that the formation of Red from oxidized TiO 2 requires 1e – + 1H + , while Blue requires 1e – + 2H + . The two states are in a protic equilibrium, Blue ⇌ Red + H + , with K eq = 2.65 mM. The Blue states in the TiO 2 NPs behave just like a soluble molecular acid with this K eq as their K a , as supported by solvent isotope studies. Because the trap states have different compositions, their population and depopulation occur with the making and breaking of chemical bonds and not (as commonly assumed) just by the movement of electrons. In addition, the direct observation of a 2H + /1e – trap state contradicts the emerging H atom transfer (1H + /1e – ) paradigm for oxide/solution interfaces. Finally, this work emphasizes the importance of chemical stoichiometries, not just electronic energies, in understanding and directing the reactivity at solid/solution interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-efficiency purification of CH 4 and H 2 energy sources enabled by a phosphotungstic acid-supported Os single-atom catalyst

Methane (CH 4 ) and hydrogen (H 2 ) show promise as low-carbon energy sources, but their impurities, including H 2 and CO, pose challenges for storage and use. To address these challenges, a robust purification protocol for CH 4 and/or H 2 , combined with the catalytic conversion of impurities into CO 2 and H 2 O, is a compelling solution. Here, in this work, we investigated 11 phosphotungstic acid (PTA)-supported single-atom catalysts (SACs) by density functional theory (DFT) computations. Os 1 /PTA SACs exhibited superior catalytic activity, and the ease of oxidation follows the CO > H 2 > CH 4 order. It facilitated efficient purification of CH 4 in solvents such as water, MeOH, and various others. For H 2 purification, Os 1 /PTA SACs demonstrated excellent performance in gas, water, and MeOH. Notably, in water and MeOH, it selectively removed CO without consuming H 2 with low free energy barriers. The strong Os-PTA interactions and charge transfer mechanism contributed to its exceptional catalytic activity. Our findings shed light on SAC behavior and their potential for efficient CH 4 and H 2 purification. By addressing impurity challenges and improving clean energy utilization, these findings contribute to the development of sustainable energy technologies.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

EMS-Induced Mutagenesis of Clostridium carboxidivorans for Increased Atmospheric CO 2 Reduction Efficiency and Solvent Production

Clostridium carboxidivorans (P7) is one of the most important solvent-producing bacteria capable of fermenting syngas (CO, CO 2 , and H 2 ) to produce chemical commodities when grown as an autotroph. This study aimed to develop ethyl methanesulfonate (EMS)-induced P7 mutants that were capable of growing in the presence of CO 2 as a unique source of carbon with increased solvent formation and atmospheric CO 2 reduction to limit global warming. Phenotypic analysis including growth and end product characterization of the P7 wild type (WT) demonstrated that this strain grew better at 25 °C than 37 °C when CO 2 served as the only source of carbon. In the current study, 55 mutagenized P7-EMS mutants were developed by using 100 mM and 120 mM EMS. Interestingly, using a forward genetic approach, three out of the 55 P7-EMS mutants showed a significant increase in ethanol, butyrate, and butanol production. The three P7-EMS mutants presented on average a 4.68-fold increase in concentrations of ethanol when compared to the P7-WT. Butyric acid production from 3 P7-EMS mutants contained an average of a 3.85 fold increase over the levels observed in the P7-WT cultures under the same conditions (CO 2 only). In addition, one P7-EMS mutant presented butanol production (0.23 ± 0.02 g/L), which was absent from the P7-WT under CO 2 conditions. Most of the P7-EMS mutants showed stability of the obtained end product traits after three transfers. Most importantly, the amount of reduced atmospheric CO 2 increased up to 8.72 times (0.21 g/Abs) for ethanol production and up to 8.73 times higher (0.16 g/Abs) for butyrate than the levels contained in the P7-WT. Additionally, to produce butanol, the P7-EMSIII-J mutant presented 0.082 g/Abs of CO 2 reduction. This study demonstrated the feasibility and effectiveness of employing EMS mutagenesis in generating solvent-producing anaerobic bacteria mutants with improved and novel product formation and increased atmospheric CO 2 reduction efficiency.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Analysis of the High-Pressure High-Temperature (HPHT) growth of single crystal diamond

A multi-scale, computational model is developed to describe the growth characteristics of single-crystal diamond in the High-Pressure, High-Temperature (HPHT) process. This model is the first to connect phase-change kinetics governing crystal growth to the continuum transport of carbon through the growth cell. Results show the importance of convective transport driven by buoyant flow in the metallic solvent, which increases the growth rate by nearly an order of magnitude over that obtained under diffusion alone. Parametric studies show how crystal growth may be kinetically-limited or transport-limited, depending on the value of the macroscopic kinetic coefficient. Estimating this kinetic coefficient from growth experiments yields a phase-change Damköhler number of unity, indicating a mixed regime where phase-change kinetics and transport are comparable and strongly coupled in this system. Mechanisms responsible for slowing growth as the crystal size increases are explained. Finally, supersaturation inhomogeneities along the facets of larger crystals are predicted, which may be relevant to solvent inclusion formation during growth.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Targeted Adjusting Molecular Arrangement in Organic Solar Cells via a Universal Solid Additive

The incorporation of solid additive has been considered as an effective strategy for developing organic photovoltaics with multi-components, which is independent of dynamics, playing unique roles in morphology adjustment. However, their complex working mechanisms involving specific chemical structures are selective to material systems, hence limiting their university and flexibility in application. Herein, an inert small-molecular compound naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole (NT) is introduced into the bulk-heterojunction blend as the solid additive, which can function with various material systems and solvents, depending on its simple π-conjugated structure and S⋯N interaction for adjusting molecular alignment. It is interesting to note that the introduced NT can not only improve device performance, but also simplify complicated pre- or post-processing methods, reduce impact from batch-to-batch differences, construct sufficient energy transfer channel as well as improve device stability. The resulting devices based on PTzBI-dF:Y6-BO system show an impressive power conversion efficiency of 17.4% with obviously enhanced T 80 lifetime of >1200 h. These findings provide useful guidelines for exploring potential universal solid additives benefitting toward commercial application.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Molecular simulation of the separation of toluene and p-xylene with the thermally-robust ionic liquid triphenyl-p-phenyl sulfonyl phenyl phosphonium

In this work, we use molecular dynamics simulations to evaluate the behavior of toluene (TOL) and p-xylene (XYL) within three different solvents: n -hexane (HEX), n -heptane (HEP), and a thermally-robust ionic liquid (triphenyl-p-phenyl sulfonyl phenyl phosphonium + bis(trifluoromethylsulfonyl)imide (TPSP + Tf 2 N)). Several different temperatures are explored, while the solvation structures, energetics, and dynamics of TOL and XYL are evaluated. The solvation free energy (ΔG solv ) and transfer free energy (ΔG transfer ) of TOL and XYL are calculated using thermodynamic integration (TI). The transfer free energy of XYL from HEP/HEX to TPSP + Tf 2 N is more favorable than that of TOL over the entire temperature range, while the transfer of both TOL and XYL becomes less favorable as the temperature increases. The diffusion rates of TOL and XYL are lower in the ionic liquid when compared to HEP and HEX, but the thermal stability of TPSP + Tf 2 N may allow for higher operating temperatures and accelerated mass transport rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Demonstration and Validation of Additively Manufactured Intensified Device for Enhanced Carbon Capture

In FY 2018 and 2019, ORNL personnel designed, prototyped, characterized, and tested the enhancement of amine-based carbon capture using additively manufactured intensified devices, i.e., devices combining multiple thermodynamic and kinetic processes into one unit operation. State of the art scrubbing technology often employs inter-stage cooling which requires multiple stages of single-purpose unit operations, leading to larger equipment size, higher capital cost, and sometimes less than optimal operating conditions for each piece of equipment. It was proposed that integrating multiple thermodynamic and kinetic operations into one unit could mitigate or negate these drawbacks. Heat and mass transfer studies demonstrated that an additively manufactured intensified device could significantly improve capture efficiency at bench scale. This project is a continuation of FEAA130 and aims at (1) demonstration and validation of enhanced CO 2 capture with 3D printed intensified devices (i.e., mass exchanger packing with internal cooling channels), for low-aqueous-solvent (LAS) based capture at the ORNL-constructed laboratory-scale (4.5-feet tall) column, namely Column A, with built-in cooling and (2) computational scoping on the conceptual design of a flexible and modular larger column, namely Column B, at ORNL for further demonstration of enhanced capture for aqueous solvent. To execute this multi-faceted project scope, an integrated project team from ORNL’s Manufacturing Science Division is tasked with applying capabilities in computational fluid dynamics (CFD), additive manufacturing, and absorber-scale demonstration/validation experiments.

42 ENGINEERING↗
DOE OSTI2026

Tailored polyMOFs for ion transport in lithium-based battery electrolyte

Owing to their low flammability, solid-state and quasi-solid-state electrolytes are safer alternatives to liquid organic electrolytes for energy storage applications. Metal–organic frameworks (MOFs), with facile functional tunability, long-range order, and rich host–guest interactions, have been implemented as electrolyte materials in a wide range of energy storage applications. In this work, we investigate a class of MOFs called polyMOFs as quasi-solid-state electrolyte materials. Unlike MOF–polymer composites, which are physical mixtures of MOF particles and polymers, polyMOFs are composed of polymeric linkers and metal ion nodes that self-assembled into crystalline and porous framework materials. PolyMOFs thus marry the ionic transport properties of liquid electrolyte and polymers with the synthetic versatility and host–guest interactions of MOFs. We demonstrate that the functionality of the polymer backbone of the polyMOF linker can improve room-temperature ion transport in the material. The polyMOF based on poly(ethylene glycol) (PEG) exhibits greater ionic conductivity, lithium transference number, and lower activation energy than its polyethylene (PE) analog. Supported by solid-state 7 Li nuclear magnetic resonance spectroscopy, we propose these improvements are due to stronger coordination of Li + to oxide sites in PEG, allowing for dissociation of Li and its associated anion. DFT studies further reveal that the confined solvent molecule mediates Li + transport in PEG-functionalized UiO-66 via a metastable adsorption and hopping mechanism. This work lies at the interface of inorganic and polymer electrolytes, unveiling fundamental insights into the design of next-generation ion conductive materials for energy technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthesis of NiRu-Layered Double Hydroxide for Enhanced Oxygen Evolution Reaction

Nickel−ruthenium layered double hydroxide (NiRu-LDH) was synthesized by coprecipitation using formamide as both solvent and intercalant. The synthesis was performed at various temperatures to study the impact of temperature on electrochemical performance. Temperature plays a vital role in optimizing LDH synthesis to enhance oxygen evolution reaction (OER) efficiency. The optimal temperature yielded a well-defined morphology with balanced crystallinity, leading to more active sites and improved charge transfer. Electrochemical tests indicated that the NiRu-LDH sample prepared at 50 °C (NiRu-LDH-50) required only 280 mV overpotential versus the reversible hydrogen electrode to achieve 10 mA/cm 2 and exhibited a low Tafel slope of 52 mV/dec, demonstrating excellent catalytic kinetics. This study presents the synthesis of NiRu-LDH via coprecipitation and emphasizes how reaction temperature influences LDH structural properties and OER performance.

Catalysts↗
DOE OSTI2025

Hydrogen Adsorption, Reactivity, and Catalysis on Colloidal Iron Carbide Nanoparticles

Supported iron carbide particles have long served as catalysts for CO hydrogenation (the Fischer Tropsch synthesis, FTS) and continue to be attractive. Despite this, little is known about their chemistry. Reported here is a colloidal Fe x C nanoparticle (NP) model system that allows direct observation of surface hydrogen and CO, as well as quantification of the surface H. Dodecylamine-capped Fe x C NPs (DDA-Fe x C NPs) were synthesized through solution-phase carburization of Fe NPs and form stable colloids in low-polarity organic solvents. Treatment of these colloids with H 2 or D 2 produced highly hydrogenated materials, and FTIR spectra of DDA-Fe x C-D n showed that most of the D binds to carbides, with at least four distinct v(C-D) modes. The surface C-H(D) bonds were all reactive, transferring hydrogen to alkenes and other reagents in solution. Titration and ICP measurements showed a 0.17:1 ratio of added H:total Fe, or roughly. 40 H per 1.8 nm DDA-Fe x C NP. Conversely, CO was preferentially bound to surface Fe sites, with FTIR spectra showing a single broad v(CO) that shifted with CO coverage or co-adsorption of H 2 . The DDA-Fe x C NPs were active catalysts for both olefin hydrogenation and the FTS, under mild conditions and without catalyst pre-treatment. The CO hydrogenation reactions yielded a broad distribution of long-chain linear paraffins and olefins. Though quantitative comparisons with typical FTS results are not possible because of our use of sealed batch reactors and other factors, the observations of high catalytic reactivity demonstrate the relevance of this model system to iron-carbide catalysis. DFT calculations on model slab surfaces with varying iron carbide stoichiometries revealed that the thermodynamically preferred surface adsorption sites are C for H ads and Fe for CO ads . A variety of binding sites and binding energies were found for each adsorbate. We are unaware of previous studies indicating that a diverse array of C-H bonds is the primary source of reactive H on iron carbides. Experimentally, the diversity of *C-H sites was evident in reactions with H-atom donors and abstractors of different strengths, from both the reaction stoichiometries and IR spectra. The different surface–H binding energies correlate with the v(C-D) stretching frequencies. Furthermore, these insights into complex iron carbide surfaces and catalysis could assist catalyst design, and they showcase the importance of stoichiometric studies of reaction intermediates.

08 HYDROGEN↗
DOE OSTI2024

Plutonium Speciation and Oxidation State Distributions in the Presence of Citrate

We explored the speciation and kinetics of the Pu(VI)-citrate and Pu(III)-citrate systems (pH m = 2.5–11.0, I = 0.1 M NaCl, T = 23 °C, O 2 (g) < 2 ppm) using ultraviolet–visible–near-infrared (UV–vis–NIR) spectrophotometry, solvent extraction, and PHREEQC modeling. Formation constants were determined for PuO 2 (HcitH)(aq) (log K° 1,1 = 1.09 ± 0.05) and PuO 2 (HcitH)(citH) 3– (log K° 1,2 = -0.20 ± 0.07), and evidence for (PuO 2 ) m (citH –k ) n (OH) x 2m(3+k)n–x was identified under alkaline conditions. Pu(VI) species were found to be less stable in the presence of citrate than in the absence of citrate (t ≤ 168 days); the rate of reduction increased with increasing pH. Further, the direct reduction of Pu(VI) to Pu(IV) was required to fit experimental data in the presence of citrate but did not improve the fit for Pu in the absence of citrate. We also observed increased Pu(III) stability in the presence of citrate (t ≤ 293 days), with higher concentrations of Pu(III) favored at lower pH. Finally, we provide evidence of a radiolysis-driven mechanism for the citrate-mediated reduction of plutonium that involves electron transfer from the oxidative breakdown of citrate. Our work highlights the need to investigate the redox effect of organic ligands on plutonium oxidation states under repository-relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reversible Interfacial Hydride Transfer as a Complementary Tool To Measure Molecular Hydricity

Hydride transfer is an essential elementary reaction across the chemical value chain, but there are limited methods available for quantifying thermodynamic hydricity (ΔG H- ), particularly among main group reagents. Herein, we exploit facile H 2 activation and reversible hydride transfer from a metal surface to a molecular reagent, the net hydrogen reduction reaction (HRR), to develop a potentiometric method for quantifying ΔG H- of main group reagents recalcitrant to conventional methods. HRR potentiometry is first validated with a benzimidazole-based hydride donor and then applied to uncover the impact of the reaction environment on hydricity. For a benzimidazole-based hydride donor, HRR equilibrium potentials are roughly invariant across solvents, indicating that the solvent dependence of its hydricity largely reflects the differential solvation of H - across media. For formate, HRR potentials and corresponding hydricities depend strongly on water content. Additionally, for borohydrides, HRR potentiometry reveals that effective hydricity values are strongly influenced by Lewis acid-base adduct formation with the hydride acceptor but are minimally influenced by the countercation. Together with these studies, the advantages, limitations, and practical considerations of the HRR potentiometry method are discussed, highlighting the power of this methodology as a complementary tool to measure molecular hydricity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Toward Metal-free Photocatalysis: Photochemical Regeneration of Organic Hydride Donors Using Phenazine-Based Photosensitizers

Earth-abundant chromophores and catalysts are important molecular building blocks for artificial photosynthesis applications. Our team previously reported that metal-free hydride donors, such as biomimetic benzoimidazole-based motifs, can reduce CO 2 selectively to the formate ion and that they can be electrochemically regenerated using the proton-coupled mechanism. To enable direct utilization of solar energy, we report here the photochemical regeneration of a benzoimidazole-based hydride donor using a phenazine-based metal-free chromophore. The photochemical regeneration was investigated under different experimental conditions involving varying sacrificial donors, proton donors, solvents, and component concentrations. The best hydride regeneration yield of 50% was obtained with phenol as a proton source and thiophenolate as a sacrificial electron donor. The mechanism of photochemical regeneration was studied using steady-state and time-resolved UV/Vis spectroscopies. Based on the results of these studies, we hypothesize that the initial photoinduced electron transfer from photoexcited phenazine chromophores involves the benzoimidazole cation and that this process is likely coupled with proton transfer to generate protonated benzoimidazole-based radical cation. The second photoinduced electron transfer is hypothesized to generate the hydride form. Furthermore, our findings provide the requisite information for the future development of reductive photocatalysts for solar energy and light-harvesting applications utilizing earth-abundant metal-free materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Diversity-oriented synthesis of polymer membranes with ion solvation cages

Microporous polymers feature shape-persistent free volume elements (FVEs), which are permeated by small molecules and ions when used as membranes for chemical separations, water purification, fuel cells, and batteries. It remains a significant challenge to identify FVEs with analyte specificity, due to difficulties in generating microporous polymer libraries with sufficient diversity for screening their properties. Here, we describe a diversity-oriented synthetic (DOS) strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions (Li + ). Furthermore, key elements of our strategy included diversification of bis(catechol)-type monomers via multi-component Mannich reactions to introduce Li+-coordinating functionality within individual FVEs, topology-enforcing polymerizations for generating macromolecular skeletal diversity for networking FVEs into different pore architectures, and several classes of on-polymer reactions for diversifying pore geometries and dielectric properties. Lead candidate polymer membranes featuring explicit ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome.4 These advantages are tied to enhanced Li + partitioning from the electrolyte when the cages are present, higher diffusion barriers for anions within the pores, and network-enforced restrictions on the number of solvent molecules bound to Li+ by comparison to the bulk electrolyte, which reduces the effective mass of the working ion. Such membranes show promise as anode-stabilizing interlayers in high-voltage lithium-metal batteries for electric mobility.

42 ENGINEERING↗